Query Help: Item Below Reorder Level-find All Items For Same Vendor

May 1, 2007

Use the Northwind database Products table as an example.
Purchasing dept gets a report showing when inventory items on hand qty are
below the reorder level.
easy enough:
Select ProductID, ProductName, SupplierID, UnitsInStock, ReorderLevel
from Products
where (UnitsInStock < ReorderLevel)

Results:
ProductID ProductName SupplierID UnitsInStock ReorderLevel
2 Chang 1 17
25
3 Aniseed Syrup 1 13
25


It would be nice to know what other products are purchased from this same
vendor in case other items are close to their reorder level.

All products for Supplier ID 1
Select ProductID, ProductName, SupplierID, UnitsInStock, ReorderLevel
from Products
where SupplierID = 1

Results:
ProductID ProductName SupplierID UnitsInStock ReorderLevel
1 Chai 1 39
10
2 Chang 1 17
25
3 Aniseed Syrup 1 13
25


This shows there is 1 more product (Chai) that also comes from Supplier 1.
Is there a way to show all items from a vendor when some of the items are
below the reorder level without needing a separate query for each vendor?

Thanks

View 4 Replies


ADVERTISEMENT

Create A Query Where Semi Item Materials Are Also Listed In Finished Item Recipe?

Dec 6, 2013

I have a BOM table with all finished item receipes and semi items recipes. create a query where semi item materials are also listed in finished item recipe.

View 5 Replies View Related

Item-Level Security For Reports

May 15, 2007

Hello,



Can somebody explain the process for implementing Item-Level security for reports? My requirement is as follows:



I have some reports pertaining to a specific department, where in I deployed them to a specific folder on Reporting Services. Now I need to give exclusive read access to those reports for the users in that department. They should not be able to create any folders / new reports etc.



The steps I have followed:



1. Deployed the reports from VS 2005 to a specific folder called "TheirReports" and in this I placed the Data source also as a seperate folder.

2. I clicked on Site Settings in Report Manager and then clicked on Configure Item-Level role definitions.

3. Clicked on New Role and gave a name as ReportsBrowser and checked the options --> "View Data sources / View folders / View reports / View resources"

4. Now I went back to the specific folder and clicked on Properties -> Security -> New Role Assignment.

5. Added the necessary users binding them to ReportsBroser role.



When I'm checking from the user machine, they are able to create new folders etc.



Appreciate your ideas.



Thanks

View 1 Replies View Related

Transact SQL :: Group By On A Transaction At Line Item Level?

May 20, 2015

I need to group by transactions at line item level. As the each item in the transaction may belong to different category and I'musing case statement to identify particular category for one column , I'm using sub-query to retrieve the results at item level.

Here is the code:

SELECT
fs.TransactionId
,fs.DateKey
,dc.FirstName
,dc.LastName
,dc.Company 

[code]....

Due to case by statement and having multiple category I have to use multiple group by.

select TransactionId
,DateKey
,FirstName
,LastName
,Company
,City
,Sum(CategoryAPurchase) CategoryAPurchase

[code]....

View 5 Replies View Related

SQL Server Admin 2014 :: AlwaysOn And Instance-level Items

Jul 16, 2015

How you are handling the replication of the many instance-level objects/items (logins, linked servers, server roles, database mail, operators, on and on) to the replicas in an AlwaysOn topology.

I'm especially curious about DBAs managing larger SQL Server environments. In my current environment, we have approximately 80 production SQL instances containing about 650 databases that require high availability and disaster recovery.

We use mirroring today and have a solid, home-grown solution for replicating the instance-level items from production to disaster recovery. AlwaysOn changes things a bit since we'll have multiple replicas and of course the database could be active on any one of those at any time. So my concern is about instance-level items being created in one instance but never deployed to the other instances participating in the AG group.

View 2 Replies View Related

Cannot Find An Item In A Big Table

Nov 27, 2006

Hello people,

I have a table of 30,000 records on my handheld which runs windows 4.2 and sql me. When the item I am searching for is at the top of the table, the search finds it easily. When the item is in the middle or lower, it doesnt find it. I am not running out of memory and my database is on the local memory. Here is my code:



String query = "SELECT * FROM Products WHERE Barcode = " + TheReaderData.Text;

DataSet ds = GetDescription(query);

label2.Text = TheReaderData.Text;

label1.Text = "No description";

if (ds.Tables[0].Rows.Count != 0)

{

label2.Text = (ds.Tables[0].Rows[0].ItemArray[0]).ToString();

label1.Text = (ds.Tables[0].Rows[0].ItemArray[1]).ToString();

}



---------------------------------------------------------------------------------------

private DataSet GetDescription(string str)

{

DataSet ds = new DataSet();

try

{

System.Data.SqlServerCe.SqlCeEngine theEngine = new SqlCeEngine(CONN_STRING);



if (!System.IO.File.Exists(DBFILE))

{

theEngine.CreateDatabase();

}



SqlCeDataAdapter da = new SqlCeDataAdapter(str, localDB);

da.SelectCommand.CommandTimeout = 6000;

da.SelectCommand.CommandType = CommandType.Text;



da.Fill(ds);

}

catch (Exception exce)

{

string total = exce.ToString();

}

return ds;

}



I hope there is some way to find the item in the object. Any ideas?

Thanks in advance, John.

View 9 Replies View Related

Problem Deploying Custom Report Item. Items Shows In Preview Screen In VS, But Not In Server Deployed Report

Nov 29, 2006

I have developed a custom report item that works fine in design and preview mode while in Visual Studio. I cannot get it to show up on my deployed reports. Here's what I have done so far:

1. Deployed the report using Visual Studio

2. updated the rsreportserver.config file with the following entry:

<ReportItems>
<ReportItem Name="PedigreeChart" Type="Uabr.Rap.PedigreeChart.PedigreeChartRenderer, Uabr.Rap.PedigreeChart" />
</ReportItems>

3. Updated the rssrvpolicy.config file with the following entry.

<CodeGroup
class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Description="This code group grants Uabr.Rap.PedigreeChart.dll FUllTrust permission. ">
<IMembershipCondition
class="UrlMembershipCondition"
version="1"
Url="C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerinUabr.Rap.PedigreeChart.dll" />
</CodeGroup>

I've also tried using the StrongNameMembershipCondition with no better results.

4. The dll and its dependencies are copied to the bin directory of the report server.

5. When I load a report with this custom report item on it, the report loads fine with no errors or warnings in the log file (even with verbose tracing). The area where the custom item should be is just white. It's almost like Reporting Services isn't registering the item correctly.

This is particularly frustrating because the report works fine in Visual Studio - apparently I configured that correctly. Any suggestions would be greatly appreciated. I'm stumped.

View 6 Replies View Related

Find How An Item Ranks In A Table?

Feb 7, 2007

Is it possible to find the position of an item without retrieving all the records in the table?
I have a products table, and want to find out how its sales are doing within a particular category.
My table consists of the following columns of interest:
ProductID, CategoryID, ItemsSold.
So, how would I turn the following query into an (not sure if the terminology is correct) aggregate query?SELECT * FROM dbo.Products
WHERE CategoryID = 10
ORDER BY ItemsSoldAlso, is it possible to include the SUM() of the items (in the same category) in the aggregate function or would I need to perform a separate query?Any help would be very much appreciated.Thanks.

View 3 Replies View Related

Find Most Recent Record For Each Item?

Oct 29, 2014

We have a work order notes table in our ERP system, and I want to see the most recent note record for each work order. Sometimes there will one be one, so I want to see all those, but sometimes there will be several notes for each work order and in this case I want to see only the most recently added note for that work order.

The query below shows some results as an example. In this case I want to see all the records except for work order number DN-000023 where I only want to see the note dated/timed 07-12-2011 16:52 (the most recent one).

select id, worknumber, date, notes from worksordernotes

id worknumber date
----------- ------------ ----------------------- --------------------
1 DN-000056 2011-12-07 13:22:00 13.20 PM JAMES- SPOK
2 DN-000079 2011-12-07 14:24:00 JCB HAVE TOLD ME THE
4 DN-000065 2011-12-07 15:48:00 ANDY FROM SITE RANG
5 DN-000023 2011-12-07 15:54:00 CHASED THIS 4 TIMES
6 DN-000023 2011-12-07 16:52:00 HOLTS ATTENDED THIS
7 DN-000092 2011-12-08 09:50:00 RETURNING WITH PARTS

View 3 Replies View Related

Find Items And Datediff From Current Date And Print

Apr 4, 2012

What I want to do is I have a table checks which looks like-:

Items--Waitarea--Datecreated
1-------A1-------2011-10-12
1-------A1-------2011-10-13
1-------A1-------2011-10-14
1-------A1-------2011-10-15
1-------A2-------2011-10-16
1-------A2-------2011-10-18
2-------A2-------2011-10-19
2-------A2-------2011-11-17
2-------A2-------2011-12-17
3-------A2-------2012-01-17
3-------A2-------2012-01-18
3-------A3-------2012-01-19
3-------A1-------2012-01-20
4-------A2-------2012-01-21
4-------A2-------2012-01-22
4-------A2-------2012-01-31

What i need to find is items and datediff from current date to created date with respect to wait area. You will get more clear with example

For Eg. For items 1 the wait area changes from A1 to A2 at
2011-10-16 and remains A2 so i need to find the date differeence from
today date to 2011-10-16

For item 2 that wait area remains same for entire period that is
A2 so datediff from today date to 2011-10-19(last created date of that item)

For item 3 that wait area A2 then it becomes A3 then becomes A1
so need datediff from today to 2012-01-20

For item 4 that wait area A2 remains for the entire period
so need datediff from today-2012-01-21

The expected output wanted
items---daycount
1-----datediff(day,checks.datecreated,getdate()--here checks.datecreated will be 2011-10-16
2-----datediff(day,checks.datecreated,getdate()--here checks.datecreated will be 2011-10-19
3-----datediff(day,checks.datecreated,getdate()--here checks.datecreated will be 2012-01-20
4-----datediff(day,checks.datecreated,getdate()--here checks.datecreated will be 2012-01-21

View 9 Replies View Related

Find How Long Items Open Using Date Columns

Mar 11, 2013

I have a sample view with some dates. How would you find the numbers of items open per month. Say between OpenDate and CloseDate I want to find how many were open for January, February,?

Here is a sample table with the data

Code:
CREATE TABLE [dbo].[TestDate](
[ItemTitle] [nvarchar](50) NULL,
[ItemAttachAssignDate] [date] NULL,
[ItemDetachConcludeDate] [date] NULL,
[Status] [nvarchar](50) NULL,
[FullName] [nvarchar](100) NULL,
[OpenDate] [date] NULL,
[CloseDate] [date] NULL
) ON [PRIMARY]
GO

Code:
INSERT INTO [TestDate]([ItemAttachAssignDate], [ItemDetachConcludeDate], [Status], [FullName], [OpenDate], [CloseDate])
VALUES('2013-02-18 00:00:00', '2013-02-19 00:00:00', 'Done', 'Jeff Hunter ', '2013-02-18 00:00:00', '2013-02-19 00:00:00');
INSERT INTO [TestDate]([ItemAttachAssignDate], [ItemDetachConcludeDate], [Status], [FullName], [OpenDate], [CloseDate])
VALUES('2012-10-15 00:00:00', '2013-02-05 00:00:00', 'Done', 'Tommy Johnson', '2013-01-22 00:00:00', '2013-01-28 00:00:00');

[Code] .....

View 2 Replies View Related

SQL Server 2008 :: Find All Items That Call A Stored Procedure

Nov 2, 2015

We have a process that uses a stored procedure: sp_MysteryProcedure....

The problem I am having is: I am 95% certain the issue lies with this stored procedure, but I cannot find the process that calls this procedure. It could be a SQL Server Job that calls the procedure directly, it could be an SSIS (*.dtsx) process that calls this procedure, or some other random process.

One of the big issues is we have tons of *.dtsx packages that call a bunch of stored procedures, but it doesn't seem a normal Windows Search (Start --> Search) searches these files (or perhaps something else is going on with this search).

So my question is multi-part.....

1). How would one go about finding a rouge process that loads data via a stored procedure if we believe we know the stored procedures name?
2). How do you search *.dtsx files?

View 9 Replies View Related

Reporting Services :: Find Items With Type Name Search Condition

May 17, 2012

The following 

SearchCondition[] sc = {new SearchCondition() {                                               
Name = "TypeName"
,Values = new string[] {"Report"}         
,Condition = ConditionEnum.Equals
,ConditionSpecified = true
}};
catalogItems = ReportService2010.FindItems("/"
,BooleanOperatorEnum.And
,new Property[] {new Property(){Name = "Recursive",Value="True"}}
,sc
);

Returns the following error

System.Web.Services.Protocols.SoapException: The TypeName field has a value that is not valid. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidElementException: The TypeName field has a value that is not valid.
at Microsoft.ReportingServices.WebServer.ReportingService2010Impl.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, Property[] SearchOptions, SearchCondition[] SearchConditions, CatalogItem[]& Items)
   at Microsoft.ReportingServices.WebServer.ReportingService2010.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, Property[] SearchOptions, SearchCondition[] SearchConditions, CatalogItem[]& Items)

The type appears to be correct. I've tried type of "Folder" and receive the same error.

View 5 Replies View Related

How Find Space Used, Database And Table Level?

Mar 22, 2000

The sp_spaceused proc seems to have been removed in 7.0?
Dbcc sqlperf also seems to have been removed?
Surely there must be a counterpart - which is?
I like to have a script which shows the space usage
especially on a table basis for a periodic report.

View 3 Replies View Related

The SSE Provider Did Not Find The Database File Specified In The Connection String. At The Configured Trust Level (below High Trust Level), The SSE Provider Can Not Automatically Create The Database File.

Aug 31, 2007

The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website   and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration.  So how can I configure what I want to have users be able to do?  It seems that this choice is only available if I am building the ASP.NET page on my "localhost".  So that is the first problem.  So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box).  How ever when I try to get someone to try to login  I am taken to a page that has an server error.  The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom.  I think this is happening because the automatically generated databases are not getting built online as they are on my computer.  On my computer I have MSSQL express.  So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder).  So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database.  Is this the correct methodology?   Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server?   The error says that either the Server did not find the database or that the trust level was insufficient.  I don't think that is it as I just looked again and I don't see any .MDF files.  So how would I go about getting this to work right? Is there a way to do this with MySQL also?  So that I don't have to use MSSQL?  My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense.  It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.]   System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237   System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87   System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121   System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105   System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42   System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83   System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160   System.Web.UI.WebControls.Login.AttemptLogin() +105   System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99   System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35   System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115   System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163   System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7   System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11   System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
 

View 1 Replies View Related

Msg 15151, Level 16, State 1, Line 5 (Cannot Find The User)

Apr 26, 2007

I'm getting a specific error when i try to run a .sql script for a Custom TableProfile from the Asp.net site,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the .sql script i get the following errors::



Msg 15151, Level 16, State 1, Line 5

Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.







How can i fix this??







Thxs in Advance Rattlerr

View 6 Replies View Related

Help, Running A Control Flow Item Does Not Kick Off The Next Item

Mar 6, 2007

Hi,

Here's my problem. I have 2 tasks defined in my Control Flow tab:

EXECUTE SQL--------->EXECUTE DTS 2000 PACKAGE

When I attempt to run it, by right-clicking the EXECUTE SQL task, and selecting "Execute Task", it only runs the EXECUTE SQL part (successfully), and does not "kick off" the EXECUTE DTS 2000 PACKAGE, after it is done running (even though it completes successfully, as shown by the green box).

Yes, they are connected by a dark green arrow, as indicated in my diagram above.

Why is this?? Am I missing something here? Need help.

THANKS

View 3 Replies View Related

Sql 2005 Express Advanced (Msg 15151, Level 16, State 1, Line 5 Cannot Find User)

Apr 26, 2007

 I'm getting a specific error when i try to run a .sql script for a Custom TableProfileProvider ,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the   .sql script i get the following error. It will produce the table but with "Errors" which dosn't do anyone any good to have errors in the table. I even used the Sql Server Surface Area Configuration to add a new Administrator with the name listed below (WYATT-PCWyatt), that didnt help either..Here is part of the Sample Scheme the problem lies in the [YOURMACHINENAMEASPNET]
Server = WYATT-PCSQLEXPRESS
Computer Name = Wyatt-PC
OS: Windows Vista Home Premium
===========================================================
use TableProfileProviders
go
--
--grants on ASP.NET stored procedures and tables used by the custom providers
--
grant EXECUTE on dbo.aspnet_Applications_CreateApplication to [YOURMACHINENAMEASPNET]
grant EXECUTE on dbo.aspnet_Users_CreateUser to [YOURMACHINENAMEASPNET]
grant SELECT on dbo.aspnet_Users to [YOURMACHINENAMEASPNET]
grant UPDATE on dbo.aspnet_Users(LastActivityDate) to [YOURMACHINENAMEASPNET]
go
--drop table dbo.ProfileTable_1
--go
create table dbo.ProfileTable_1 (
UserId uniqueidentifier not null Primary Key,
FirstName nvarchar(50) null,
LastName nvarchar(50) null,
Age int null,
LastUpdatedDate datetime not null)
go
grant SELECT,INSERT,UPDATE,DELETE on dbo.ProfileTable_1 to [YOURMACHINENAMEASPNET]
go
================================================================================
Msg 15151, Level 16, State 1, Line 5
Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.
 
 
 
How can i fix this??

View 16 Replies View Related

How To Select The Last Identical Item# Until A Different Item# In The Table

Jul 12, 2007

Hello,Basically, I have a table with 2 fieldsId     item#1      33332      33333      22224      22225      22226      33337      33338      3333I would like to only select the last identical Item# which in this case would be  the id 6,7 and 8Any idea how could I do that?Thanks

View 1 Replies View Related

Reorder My Rows

May 6, 2005

Howdie y'all,
Im adding rows to my database like this:
GroupID = IdentityGroupUser = UserIdGroupColumn = 1 GroupPosition = Count (*) where UserId = UserId AND Column = 1
Int this way my table looks like this on a certain moment:
1 ; 1 ; 1 ; 02 ; 1 ; 1 ; 13 ; 1 ; 1 ; 24 ; 1 ; 1 ; 3
 
But then i would, for example, like to delete the 3rd row and i like to renumber the last column so form this:1 ; 1 ; 1 ; 02 ; 1 ; 1 ; 14 ; 1 ; 1 ; 3 <- this is my problem
to this:1 ; 1 ; 1 ; 02 ; 1 ; 1 ; 14 ; 1 ; 1 ; 2 <- here it is solved
 
Whats the simplest sql stored procedure to perform this reordering task???
Thanks,
Wes

View 5 Replies View Related

Summing Invoice Items - The Multi-part Identifier Items.TAX Could Not Be Bound

Apr 17, 2007

Hi: I'm try to create a stored procedure where I sum the amounts in an invoice and then store that summed amount in the Invoice record.  My attempts at this have been me with the error "The multi-part identifier "items.TAX" could not be bound"Any help at correcting my procedure would be greatly appreciate. Regards,Roger Swetnam  ALTER PROCEDURE [dbo].[UpdateInvoiceSummary]    @Invoice_ID intAS    DECLARE @Amount intBEGIN    SELECT     Invoice_ID, SUM(Rate * Quantity) AS Amount, SUM(PST) AS TAX    FROM         InvoiceItems AS items    GROUP BY Invoice_ID    HAVING      (Invoice_ID = @Invoice_ID)    Update Invoices SET Amount = items.Amount    WHERE Invoice_ID =@Invoice_IDEND

View 3 Replies View Related

SQL Server 2012 :: Identify Sets That Have Same Items (where Set ID And Items In Same Table)

Feb 25, 2015

I am struggling to come up with a set-based solution for this problem (i.e. that doesn't involve loops/cursors) ..A table contains items (identified by an ItemCode) and the set they belong to (identified by a SetId). Here is some sample data:

SetIdItemCode
1A
1B
24
28
26
310
312
410

[code]....

You can see that there are some sets that have the same members:

- 1 and 10
- 2 and 11
- 7, 8 & 9

What I want to do is identify the sets that have the same members, by giving them the same ID in another column called UniqueSetId.

View 8 Replies View Related

Query To Each Item Inside A Datalist

Dec 25, 2007

Hi! I'm creating a social network, and in one page I need to compare each result of the datalist to a value of a table in my database. For example, I have the datalist showing all the entries in the table users, and when I am showing this information, I want each dataitem to be compared to a select statement of the friends of the logged in user, so that if that datalistitem is present in the results of that other select, I will change the text of a field to say "already a friend". If the user is not present in that select, ie is not a friend of the user who is logged in, the text will say "add friend". I have this comparison working already for a specific name, but not for the database query. Can anyone please help me? The code is below... <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %><%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %><asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"><script language="VB" runat="server">    Sub Page_Load(Sender As Object, E As EventArgs)        Dim DS As DataSet        Dim MyConnection As SqlConnection        Dim MyCommand As SqlDataAdapter        MyConnection = New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True")        MyCommand = New SqlDataAdapter("select * from aspnet_Users where IsAnonymous='False'", MyConnection)        'Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|;Integrated Security=True;User Instance=True        DS = New DataSet()        MyCommand.Fill(DS, "aspnet_Users")        MyDataList.DataSource = DS.Tables("aspnet_Users").DefaultView        MyDataList.DataBind()                          End Sub</script><body>    <br />  <ASP:DataList id="MyDataList" RepeatColumns="1" runat="server">      <ItemTemplate>        <table cellpadding="10" style="font: 10pt verdana" cellspacing="0">          <tr>            <td width="1" bgcolor="BD8672"/>            <td valign="top">                          </td>            <td valign="top">            <div id="hey"><div id="dados"><b>Name: </b><%#DataBinder.Eval(Container.DataItem, "UserName")%><br><b>city: </b><%#DataBinder.Eval(Container.DataItem, "City")%><br></div>               <div id="photo"><b>Photo: </b><%#DataBinder.Eval(Container.DataItem, "UserName")%><br>status:          </div>                            <p></div>              <a href='<%# DataBinder.Eval(Container.DataItem, "UserName", "purchase.aspx?titleid={0}") %>' >                                <%#IIf(Container.DataItem("UserName") = "marta", "<a href='mailto:" & Container.DataItem("UserName") & "'>Email</a>", "")%>                                <img border="0" src="/quickstart/aspplus/images/purchase_book.gif" >              </a>            &nbsp;&nbsp;</td>          </tr>        </table>      </ItemTemplate>  </ASP:DataList>  </body></asp:Content> Thanks a lot. 

View 5 Replies View Related

How To Reorder A SqlDataReader Object

Oct 5, 2007

I have a SqlDataReader object that has some records:
1 hello12 hello23 hello3
Is there a fast/easy way to reorder them?
3 hello32 hello21 hello1
 
 

View 2 Replies View Related

SQL With AJAX Reorder List

Apr 6, 2008

 So far I'm able to populate an ajax control toolkit reorder list with an SQL table, but I can't get it to reorder through the database.The SQL table is something like this-int ListID, varchar Title, int SortingOrder (SortingOrder always goes 1-n, there are no duplicates and no gaps) When the user changes the position of an entry, I need the reorder list to update the SortingOrder of all the pages between the starting and ending place of the reordered entry.  I already have that function written, ReorderListEntries (int OldSortingOrder, int NewSortingOrder), but how and where do I call it?Basically, when the user reorders the list, I need it to-1. get the old and new positions of the reordered entry.2. pass this information back to the server3. call ReorderListEntries (old,new)4. partial page refresh the listHelp with this one will be greatly appreciated. 

View 1 Replies View Related

Reorder Packages In BIDS

Aug 15, 2007

How or is there a way to reorder the packages in BIDS? Right now they are ordered by when they are created with the newest ones on the bottom. I'd like to organize these in more of a logical order but am unsure of how to do so.

Any advise?

Thanks,
Beac

View 3 Replies View Related

Reporting Services :: Group And Sum Items / Sub-items Into One Record

Apr 10, 2015

I'm having an issue creating a report that can group & sum similar items together (I know in some ways, the requirement doesn't make sense, but it's what the client wants).

I have a table of items (i.e. products).  In some cases, items can be components of another item (called "Kits").  In this scenario, we consider the kit itself, the "parent item" and the components within the kit are called "child items".  In our Items table, we have a field called "Parent_Item_Id".  Records for Child Items contain the Item Id of the parent.  So a sample of my database would be the following:

ItemId | Parent_Item_Id | Name | QuantityAvailable
----------------------------------------
1 | NULL | Kit A | 10
2 | 1 | Item 1 | 2
3 | 1 | Item 2 | 3
4 | NULL | Kit B | 4
5 | 4 | Item 3 | 21
6 | NULL | Item 4 | 100

Item's 2 & 3 are child items of "Kit A", Item 5 is a child item of "Kit B" and Item 6 is just a stand alone item.

So, in my report, the client wants to see the SUM of both the kit & its components in a single line, grouped by the parent item.  So an example of the report would be the following:

Name | Available Qty
--------------------------
Kit A | 15
Kit B | 25
Item 4 | 100

How I can setup my report to group properly?

View 6 Replies View Related

What Questions To Ask Vendor ??

Feb 18, 2008

Will be meeting with a Vendor tomorrrow ... I am installing a new 64 bit 2005 Enterprise Instance for their product but they havent' given any documentation yet.. this is what I've come up with so far...


Does the Application need a Named Instance or will a Default Instance suffice?
(if Named, is there a preferred name?)
Type of account needed to connect to the Database from the Application? (SQL or NT Authenticated)
Type of Permissions needed to the Database with the connect account?
Preferred Recovery Model? Standard for most of ourSQL Server Databases is Full Recovery with Daily Full Backups and Frequent TLOG backups
Are users authenticated at the Application or will each user need SQL Server credentials?
Approximate size of the Database(s)

What else would I need to ask??????????????

View 5 Replies View Related

Working Around A Bad Vendor

Jul 20, 2005

A lot of our data is in a database originally provided to us bya vendor. We can add tables to the database (although we prefixthem with our own company name), and stored procedures and ourown triggers, as well. However, we have been hesitant tochange the vendor's tables (despite serious flaws), as ourchanges may get lost whenever we put in a new version of theirsoftware.I would like to be able to run a script that will check thedatabase for each of our changes, and put the change back inif it was missing. These are the main things I'd like tocheck:Foreign keys are present.Check constraints are present.Specific triggers are absent (The vendor has a bad habitof implementing foreign keys and simple checks intriggers. The foreign key checks cause us a lot oflocking trouble). If present, and not the same as theone that was originally removed, report it instead ofremoving it.Calculated fields are present.Indexes are present. (especially if we can check what isindexed, and what index is clustered)Any tips? Books to read? Software to buy?Thanks,Bill

View 1 Replies View Related

How To Reorder/compact A Column's Values After A Delete?

Feb 27, 2008



The business operation is this:
The data is stored and accessed by Invoice Number and Line Number. If there are 4 lines, 1,2,3,4 and number 2 is deleted the users want lines 3 and 4 reordered to be 2 and 3.
The existing code does things the following way, but I have my suspicions about how bulletproof it is:
Existing Data:
123,1
123,2
123,3
123,4

Begin Transaction
Delete where InvoiceNumber = 123 and LineNumber = 2.
Update set LineNumber=2 where InvoiceNumber=123 and LineNumber=3
Update set LineNumber=3 where InvoiceNumber=123 and LineNumber=4
Commit Transaction


Is there a better way of doing this?
Thanks.

View 1 Replies View Related

Any Backup Vendor Can Provide?

Apr 13, 2007

Some of my customers ask for backup their databases, mainly MSSQL & MS Exchange.
I search for any of backup vendor; there are 2 choices, service provider and software publisher. Service provider eliminates my technical support on backing up my clients databases:cool: ; software publisher offer a chance for me to create new business line:rolleyes: .
What would your gurus prefer and why?
Any admirable company you can name?

View 5 Replies View Related

Parameterized Query For A List Of Items

Sep 2, 2014

I am doing parameterized queries from Visual Basic in Visual Studio.

I have a query where I want to do something like this.

Select * from people where city in (<list of cities>)

The problem is I want to build my <list of cities> in Visual Basic and pass it to the SQL as a parameter.

I know I can't do this:

Select * from people where city in (@ListOfCities)

Currently, I'm doing this by writing the <list of cities> out to a separate table, just so I can do the query.

Select * from people where city in (Select CityName from CityTable)

View 4 Replies View Related

List Items From A Form Query

Feb 24, 2008

Hi,
I am a newbie, this is my first post (please go easy).

Iam at the moment trying to set up a query for someone looking for a property on an estate agents website.

From a drop down menu, the user can:
select an area (where they may like to live) from a list of areas.
select an amount of bedrooms from a list of bedrooms
select a minimum price from a list of prices
select a maximum price from a list of prices.

The query I worked out for this is as follows:
$data = mysql_query("SELECT * FROM property WHERE area like '$area' and bedrooms like '$bedrooms' AND price BETWEEN '$min_price' AND '$max_price'") or die(mysql_error());

This seems to work fine and shows all the properties that meet the criteria onto my webpage.

However, I then thought, someone may not care which area they live in and want to see all properties in all the areas, so I decided to add the option 'All areas' to my 'areas' list, I then did the same for the other lists, eg 'all bedrooms' option to my bedrooms list and so on.

I am now trying to write a query that incorporates where the 'all..' option is selected and have become very stuck!
Can someone set me off in the right direction for this.
I hope that makes sense?!?!

View 20 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved