Query Not Returning Data

May 29, 2008

Hello everyone,

I set up a View in SQL Server 2005. The syntax checks ok, however, when I execute it, it doesn't return any data.
This is my Query:

SELECT DATEPART(hh, Time) AS Time, COUNT([Recipient-Address]) AS [CountOfRecipient-Address], ROUND(SUM([Total-bytes]) / 1048576, 2)
AS [SumOfTotal-Bytes]
FROM dbo.TrackingLog
WHERE (RIGHT([Recipient-Address], LEN([Recipient-Address]) - PATINDEX([Recipient-Address], '@')) IN
(SELECT Domains
FROM dbo.Domains))
GROUP BY DATEPART(hh, Time)


The part that I am most concerned about is the WHERE section. If I remove it, I get some data returned. If I don't, obviously I don't get anything back.

Any suggestion would be great.

Thanks

View 4 Replies


ADVERTISEMENT

Query Not Returning Data!

Oct 21, 2007

Hi! I have a sql query in stored procedure: SELECT     Salutation + ' ' + FirstName + ' ' + LastName AS fullname
Ok, this returns a value if salutation is not null, but if the salutation is null it doesn't return any value, I was thinking if the saluation is null then I would atleast get the firstname and last name. Any help appreciated on this.

View 4 Replies View Related

Query Analyzer Returning Messed Up Data

Jul 23, 2005

I am using SQL7 Query Analyzer. A simple select * from myMLSview andthen I save results as a .csv file has the commas messed up in quite afew places. The data is messed up before I save it to the .csv file. Sothere are blank spaces being added here and there causing them to readas 'add comma' when saving to .csv format. Even the column data ismessed up... example: ,photo_mod_time,photo_mo,d_date, should read,photo_mod_time,photo_mod_date,I have a view on a remote MS-SQL7 Server, the view has about 200columns and the data returned from the my querys can be from 10 to 25MBin size. Connection is via Roadrunner/cable. Should I use anothermethod, maybe command line? Any suggestions?

View 3 Replies View Related

Transact SQL :: Returning Different Data When Part Of Query Is Separate?

Aug 3, 2015

I am writing a stored procedure to prepare some reports.

The issue is that I am summing up the combined bid, 'QuoteTotal' + Sum(InvoiceItemAmount) (eg, quote add ons).

When part of the larger query it returns a different, and incorrect amount. The query listed after the main query is just that line and it's appropriate parts and it returns the correct amount. What can I do to correct this and where lies the problem so I can learn from this situation?

alter PROCEDURE [dbo].[Select_Quote_Info_By_Salesmen_By_Status]
@Salesmen nvarchar(50),
@QuoteStatus nvarchar(50)
AS
BEGIN
SET NOCOUNT ON;

[code]...

View 5 Replies View Related

Query Not Returning Proper Data (date Related) In 2005 After Upgrade From 2000...

Jun 7, 2007

I am sending out an SOS.

Here is the situation:

We recently upgrade to 2005(sp). We have one report that ran fine in 2000 but leaves out data from certain columns (date related) in the results, so we chalked it up to being a non compatiable issue. So, I decided to try and switch the DB back to 2000 compatibility (in our test env) and then back to 2005. After that the report started returning the proper data. We can€™t really explain why it worked but it did. So we thought we would try it in prod (we knew it was a long shot) and it didn€™t work. So the business needs this report so we thought we would refresh the test system from prod, but now we are back to square one. I was wondering if anyone else has heard or seen anything like this. I am open to any idea€™s, no matter how crazy. J The systems are configured identically. Let me know if you need more information.

Thank you. Scott

View 4 Replies View Related

Query Fails When Returning A Single Record With Numeric Data In NVarChar(16) Column In Device App

Mar 12, 2008

If a Select is done on a column whose data type is nvarchar(16) and contains only numerals (UPC numbers) the select does not return the record.

1. Query with numerals in nvarchar column works as long as multiple records are returned (LIKE '012%')
2. Numeric (INT only one tested) columns works as expected
3. String columns with alpha data works as expected
4. Problem only exist when running in Device Emulator and/or actual device.
5. Same test on desktop app runs as expected.
6. Windows Mobile 6, Vista Ultimate
7. Same results when when connection to device from SSMS
8. SQL Servers comes on

Previous thread discussion of this problem (I thought that Parameters corrected problem, but not in all cases???)

http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.sqlserver.ce&mid=0cd9cd3a-f9b0-477f-b1e7-c27eb76158ae

Here is the complete code:


SqlCeConnection _conn = null;

_conn = new SqlCeConnection(@"Data Source=program FilesTestResultSetevsoft.sdf;");

_conn.Open();


// DOES NOT WORK *** This statement does not return the record (it exist)

string _sql = "SELECT * FROM Product where RegDescr='0123456' ";




// works correctly

string _sql = "SELECT * FROM PRODUCT where ProdNum = 6523 ";


// works correctly *** as long as multiple records are returned

string _sql = "SELECT * FROM PRODUCT where RegDescr LIKE '01%' ";

// works correctly


string _sql = "SELECT * FROM PRODUCT where RegDescr='BACARDI SILVER RAZZ'";

SqlCeCommand _cmd = _conn.CreateCommand();

SqlCeDataReader _rdr;

_cmd.CommandText = _sql;

_cmd.CommandType = CommandType.Text;

// Same results using ExecuteResultSet or ExecuteReader

//_rdr = _cmd.ExecuteResultSet(ResultSetOptions.Scrollable | ResultSetOptions.Updatable);

_rdr = _cmd.ExecuteReader();



listBox1.Items.Add("In the while loop");

while (_rdr.Read())

{

listBox1.Items.Add(_rdr.GetValue(1) + " / " + _rdr.GetValue(3));

}

listBox1.Items.Add("Done");

View 1 Replies View Related

Returning Results Based On One Query Into Existing Query

Aug 2, 2012

linking two tables together to get an end result

find below the code i have used

The first part of the query provides me with the info i need

SELECT sub.*,
case when rm_sales_band = '2M to 4M' then 'Kirsty' else RM end as rm
into #rmtmp

[Code].....

View 1 Replies View Related

SQL Server 2012 :: Data Grouping On 2 Levels But Only Returning Conditional Data

May 7, 2014

I think I am definitely thrashing and am not getting anywhere on something I think should be pretty simple to accomplish: I need to pull the total amounts for compartments with different products which are under the same manifest and the same document number conditionally based on if the document types are "Starting" or "Ending" but the values come from the "Adjust" records.

So here is the DDL, sample data, and the ideal return rows

CREATE TABLE #InvLogData
(
Id BIGINT, --is actually an identity column
Manifest_Id BIGINT,
Doc_Num BIGINT,
Doc_Type CHAR(1), -- S = Starting, E = Ending, A = Adjust
Compart_Id TINYINT,

[Code] ....

I have tried a combination of the below statements but I keep coming back to not being able to actually grab the correct rows.

SELECT DISTINCT(column X)
FROM #InvLogData
GROUP BY X
HAVING COUNT(DISTINCT X) > 1

One further minor problem: I need to make this a set-based solution. This table grows by a couple hundred thousand rows a week, a co-worker suggested using a <shudder/> cursor to do the work but it would never be performant.

View 9 Replies View Related

Sub Query Returning More Than One Row

Jun 11, 2008

I have the following query.
select top 3 dbo.oncd_incident.open_date,dbo.onca_product.description,dbo.onca_user.full_name,dbo.oncd_incident.incident_id,email, dbo.oncd_contact.first_name,dbo.oncd_contact.last_name,dbo.oncd_contact.contact_id
from dbo.oncd_incident
inner join dbo.oncd_incident_contact on dbo.oncd_incident_contact.incident_id=dbo.oncd_incident.incident_id
inner join dbo.oncd_contact on dbo.oncd_contact.contact_id=dbo.oncd_incident_contact.contact_id
inner join dbo.oncd_contact_email on dbo.oncd_contact_email.contact_id=dbo.oncd_contact.contact_id
inner join dbo.onca_user on dbo.oncd_incident.assigned_to_user_code=dbo.onca_user.user_code
inner join dbo.onca_product on dbo.onca_product.product_code=dbo.oncd_incident.product_code
where dbo.oncd_incident.incident_status_code='CLOSED'
and email is not null
and dbo.oncd_incident.open_date>DateAdd(wk,-2,getdate()) and dbo.oncd_incident.completion_date>=DateAdd(dd,-2,getdate()) and
dbo.oncd_incident.assigned_to_user_code in (select user_code from dbo.onca_user)
order by newid()
I want the query to be executed for each row returned by the sub query.If I use IN keyword it returns top 3 rows for any 3 of the users.But I want top 3 rows to be returned for each of teh user.Please help.
 

View 6 Replies View Related

Select Query Returning More Than One Value

Jul 6, 2007

Hi,
 My Select query returing the one column:
Options
1
2
3
Form this Options column I have to check the Checkbox1, checkbox2, checkbox3 out of total 6 checkboxes in asp.net form. I am getting the Options column from database.
How to store that resultset.
Thanks in advance.

View 2 Replies View Related

Returning A Value In An Insert Query

Nov 15, 2007

so I know how to use tsql to print a value in just the query, but when I insert a column, I want it to return the value of the ID that was just created. I don't know how to do this and send the value back to asp.net so that I can move on with that value. Can any body help me with this? this is what I have so far. thanks for the help!@title varchar(40) = null,

@intro varchar(max) = null

AS

if @title is null

begin

print 'Title Cannot Be Null'

return 0

end

if @intro is null

begin

print 'Intro Cannot Be Null'

return -1

end

BEGIN

SET NOCOUNT ON;

INSERT INTO dbo.Issue

(Title, Intro)

VALUES

(@title, @intro)

return SCOPE_IDENTITY()
 

View 3 Replies View Related

Returning Rows From A Query

Oct 22, 2001

Greetings!

I need to run a select statement that only returns 50 rows. How do I limit the amount of rows returned? Normally the query will return hundreds of rows but all I need is the first 50 it retrieves. I have looked in the BOL and can only find help with a block cursor not just a query.

Thanks a million

zachary

View 1 Replies View Related

Returning A Row Number In A Query

Oct 24, 2006

how can i get a row number in a query in ms/sql

View 7 Replies View Related

Returning Value From Dynamic Query

Apr 18, 2006

I want to get the count of rows in the table which match the status. I am writing dynamic query for it..



Create Procedure Dyn_Get_CountByStatus

(

@TableName varchar(200),

@Status int

)

as

Begin

Declare @strQuery varchar(500)

Declare @count int

set @strQuery = 'select count(*) from '+@TableName + 'where status=' + @Status

set @count =exec(@strQuery)

return @count

End

GO



This query is not working. How can get the desired result using dynamic query

View 3 Replies View Related

SQL Query Not Returning Nulls

Sep 21, 2007

Is there a way to set SQL Server 2005 Express so that I can return null values? For example, the following query will not return any values:

SELECT *
FROM tbl_form_values
where fldVALUE IS NULL;


it does return values with:

SELECT *
FROM tbl_form_values
where fldVALUE = '';

I have an Oracle background and all null values are true nulls not empty strings. I would like to be able to use the first query. Also other functions such as COALESCE work very nice with nulls. I can do the following in Oracle but not in SQL Server:

SELECT fldID, fldMID, fldFID,
COALESCE(fldVALUE, 'n/a');
FROM tbl_form_values

This will return the values in fldVALUE if they are available and n/a for all NULL values.

Any help would be appreciated.

Thanks,
E

View 1 Replies View Related

Help With Sql Query Returning Last Max Record

Oct 19, 2006

I am having problems with a SQL query.

Table has 10 fields and I need to return them all. The three most importaint, at least for the filter I need are:

id, studentid, date, canceled.

I need to return the last max(date) grater than or equal to @dateparam which is not canceled for each studentid

I have worked out some solutions but am not happy with them. Specially woried about performance when the table grows. I am expecting in full production a table growth of about 3 million records per month.

what would be grate is if there where a way of returning a the coresponding id like in:

select studentid, max(date), related(id) as ids
from tablea
where canceled=0
group by studentid

then I could do:

Select *
from tablea inner join (select studentid, max(date), related(id) as ids
from tablea a
where canceled=0
group by studentid
) b on (a.id=b.ids)

View 5 Replies View Related

Returning ALL Records In A Query

Aug 18, 2006

I'm building a db to collect equip fault data in SQL 2005 and need to modify my query to be able to select/display "ALL" records. I'm currently using a sp to assign a shift to each record and then have a query to select all records by shift. I'd like to add an option to the query to be able to select ALL records, regardless of shift. I've included the sp & query I am currently using. Any help would be appreciated.

Thanks

ALTER PROCEDURE [dbo].[p_dtu_Store_Line_Fault_Data]
-- Add the parameters for the stored procedure here
@AssetID int,
@Timestamp datetime,
@FaultCode int,
@State int
AS
BEGIN
SET NOCOUNT ON;
IF @State = 3
BEGIN
INSERT LineFaultData (FaultCode, AssetID, StartTime, Duration, Shift)
VALUES (@FaultCode, @AssetID, @Timestamp, 0,
CASE WHEN DATEPART(hh,@Timestamp) BETWEEN 7 AND 14 THEN 'DAYS'
WHEN DATEPART(hh,@Timestamp) BETWEEN 15 AND 22 THEN 'AFTERNOONS'
ELSE 'NIGHTS'
END)
END

IF @State <> 3
BEGIN
DECLARE @Count int
SET @Count = (SELECT Count(*) FROM LineFaultData WHERE AssetID = @AssetID AND Duration = 0)
IF @Count <> 0
BEGIN
DECLARE @StartTime datetime
SET @StartTime = (SELECT Top 1 StartTime FROM LineFaultData WHERE AssetID = @AssetID and Duration = 0)
UPDATE LineFaultData
SET Duration = DateDiff(s,@StartTime, @Timestamp)
WHERE AssetID = @AssetID and Duration = 0 and StartTime = @StartTime

END
END

END




SELECT TOP (1000) dbo.LineFaultDescription.Station, dbo.LineFaultData.StartTime, dbo.LineFaultData.Duration, dbo.LineFaultDescription.FaultDescription,
dbo.LineFaultDescription.FaultCategory, dbo.LineFaultData.Shift
FROM dbo.LineFaultDescription INNER JOIN
dbo.LineFaultData ON dbo.LineFaultDescription.FaultCode = dbo.LineFaultData.FaultCode AND
dbo.LineFaultDescription.AssetID = dbo.LineFaultData.AssetID
and (StartTime < '{@End Date}' and StartTime > '{@Start Date}')

WHERE (dbo.LineFaultData.AssetID = {Asset_ID})
AND (dbo.LineFaultData.Shift = '{@Shift}')
ORDER BY dbo.LineFaultData.StartTime DESC

View 4 Replies View Related

Returning The Results Of A Linq Query

Feb 29, 2008

I need some help. I have a function that used to use ADO.NET to return a dataview. Now I'm using linq, and I don't know how to make this work anymore.my original function looked like this:    public DataView getIssue()    {       //do some ADO, return the dataview       return ds.Tables["Articles"].DefaultView;    }  With this I could write Gridview1.dataSource = getIssue();I want to do the same thing with Linq, but I'm running into some trouble:Here's my function now:public DataView getIssue()    {        var query = from a in db.Articles        join i in db.Issues on a.IssueID equals i.IssueID       select a;            DataView dv = new DataView();            dv = query.asdatatable();        return query;    }OK, first off I can't use asdatatable since I am using a join, so I can't make the results of my query a dataview. I can't return the results of my query in this function, something that seemed simple to do in Linq now seems like something that may only be possible in ADO.Thanks for your time 

View 5 Replies View Related

Returning A Subset Of Rows From A Query

Apr 19, 2001

This question has been posted on the site before but I could not find any resolution....I want to return rows 11 - 20 from a query that returns 100 records without using a cursor or temp table.

The closest query I have found is a query that numbers the rows, but I can't seem to use rownumber in a between clause...

Use Pubs
SELECT emp_id, lname, fname, job_id,
(SELECT COUNT(*) FROM employee e2 WHERE e2.emp_id <= e.emp_id AND e2.job_id = 10) AS rownumber
FROM employee e
WHERE job_id = 10
ORDER BY emp_id

Thanks,

Jim

View 1 Replies View Related

Query Returning Duplicate Rows

Oct 6, 2004

I'm trying to write a query that will return rows within a specified range and print to a Crystal Report. When I run the query, it produces 2 row of everything. I would use the SELECT DISTINCT clause, but Crystal Reports will not let me edit the Select statement. But I can edit the FROM, WHERE and ORDER BY clauses. I think the problem is in my INNER JOINS but I'm having a problem figuring it out. Can someone please guide me in the right direction.

SELECT
DrawingVouchers."PlayerID",
DrawingVoucherNumbers."PromoID", DrawingVoucherNumbers."VoucherNumber", DrawingVoucherNumbers."IssueDate", DrawingVoucherNumbers."UserID",
CDS_PLAYER."LastName", CDS_PLAYER."FirstName",
CDS_ACCOUNT."Address1A", CDS_ACCOUNT."City1", CDS_ACCOUNT."State1", CDS_ACCOUNT."Zip1"
FROM
{ oj (("WinOasis"."dbo"."DrawingVouchers" DrawingVouchers INNER JOIN "WinOasis"."dbo"."DrawingVoucherNumbers" DrawingVoucherNumbers ON
DrawingVouchers."PlayerID" = DrawingVoucherNumbers."PlayerID")
INNER JOIN "WinOasis"."dbo"."CDS_PLAYER" CDS_PLAYER ON
DrawingVoucherNumbers."PlayerID" = CDS_PLAYER."Player_ID")
INNER JOIN "WinOasis"."dbo"."CDS_ACCOUNT" CDS_ACCOUNT ON
CDS_PLAYER."Player_ID" = CDS_ACCOUNT."Primary_ID"}
WHERE
DrawingVoucherNumbers."VoucherNumber" >= 37806 AND
DrawingVoucherNumbers."VoucherNumber" <= 37813

View 2 Replies View Related

Returning A Value From Stored Proc With Query

Jul 18, 2014

In some of our business object reports we have to create variables to decode values to what we want. I am trying to replicate this in SQL Server and remember doing this in SQL server 2000 years ago back can't remember the exact way to do it. I remember running a query and calling stored proc within query which would return the value I wanted but not sure if I can still do this in SQL server 2008 and by that I mean doing it within query or have to do it another way.

Basically what I want is to have a procedure with all the variables replicated within that procedure so that when I run a query I can just call the appropriate bit of code by passing a specific name like

select job.dept, dbo.decodevariable('ShowJobDesc' job.jobtitle), job.salary
from job

so 'ShowJobDesc' and the job.jobtitle would be used to decode each job title to return job description.Just a bit unsure and can't remember if I am doing this the right way, is this possible?

View 2 Replies View Related

Query Keeps Returning Slightly Different Results?

Feb 9, 2015

I have a query with a nested query that is used as an in line view. When I run the whole query I keep getting slightly different results each time (10000, 10002, 10001, 9999 etc.), nothing is being changed, no jobs are running on the DB to affect the tables etc.

When I run the inline view query with the nested query, or nested query on its own, it returns same number each time.

What could potentially be the cause of this?

Using SQL Server 2008 R2 Express Edition on local W7 PC

View 1 Replies View Related

Sql Query Not Returning Correct Results From Db

Feb 6, 2006

Hello.

I am new at SQL and am using SQL server express edition and im a bit stuck! I am using ASP.NET and C# in my website which is using sql database back end.

String SQLroom = "SELECT DISTINCT RoomName FROM Room INNER JOIN RoomCalendar ON Room.RoomID = RoomCalendar.RoomID WHERE Capacity = '" + reqCapacity + "' " + " AND NOT ('" + newRoomEnd + "' <= roomStartDateTime OR '" + newRoomStart + "' >= roomEndDateTime) AND (OHP = '" + ohpYesNo + "' AND AV = '" + avYesNo + "') ";

This is my SQL string... what it is trying to do is:

find the room
where the capacity is the reqcapacity entered by user
and the startdatetime and enddatetime entered by the user are not present in the table for that room capacity
and then look at whether the user requires OHP or AV facilities, which are stored in the database as either yes or no values.
The problem i am having is with the condition in the sql query... because the user may require an OHP and not AV, but then the room returned "`could" have AV facilities, as it wouldnt make a difference to them if it was there or not, basically, the yes condition has to be satisfied.

Not sure whether i should be using AND, or OR? or a combination.

Any ideas gratefully appreciated....

Sandy

View 2 Replies View Related

Query With Parameters Not Returning Right Results

Mar 19, 2008

I havea 2 part issue with a query I'm trying to run for a report.

I have an incident report that needs to show results based on dates from the week before. In addition, This report should run every Monday morning, with the exception of a Monday holiday, where in that case, the report will run the next business day. I have an idea to use a case statement, but it doesn't seem to work for me. Any suggestions?

Also,part of the query I have is pulling back the right data, as long as I don’t include parameters. When I do add values to the parameters the query includes all the dates. I need to see either/or - not both. I just want to either see dates without the param values or see only dates that I ask for in a parameter. Does that make sense?

Here’s the query (thanks!):

SELECT incident.incid_id,
incident.incid_short_desc,
incident.incid_received_date_time,
incident.incid_closed_date_time,
security_users.description,
incident.incid_assigned_to,
incident.tagged_delete_flag,
activity_result_master.result_desc,
incident_priority_master.priority_desc,
activities.result_id

FROM activities AS activities INNER JOIN
incident AS incident ON
activities.incid_id = incident.incid_id INNER JOIN
activity_result_master AS activity_result_master ON
activities.result_id =
activity_result_master.result_id
INNER JOIN security_users AS security_users ON incident.incid_assigned_to = security_users.name INNER JOIN
incident_priority_master AS incident_priority_master ON incident.priority_id = incident_priority_master.priority_id

WHERE incident.tagged_delete_flag = 'N' AND
activities.result_id = '6' AND
(incid_received_date_time >= DATEADD (d,-7,GETDATE()) AND
incid_closed_date_time <=DATEADD (d,-3,GETDATE())) OR
CONVERT(varchar,incident.incid_received_date_time,101) >= @StartDate AND CONVERT(varchar,incident.incid_closed_date_time,101) <= @EndDate

ORDER BY incident.incid_assigned_to, incident.incid_id

View 2 Replies View Related

Returning Results While The Query Is Executing

Jul 20, 2005

Hi,I wanted to know if this is possible and if so, how do Ido it. Say, I have a query "SELECT * FROM Table WHEREColumn="some_value". This executes on a very large dataset and I would like to return the results as they queryexecutes rather than wait for the whole query to execute.Basically, I want to get the results as they are preparedby the database. Any way to do this?Regards,San

View 8 Replies View Related

SQL Query Not Returning Identity Field - Sometimes

Feb 2, 2006

Hello, I have a C# application that adds records to a SQL Server database using a query something like this one:

INSERT INTO table_name
(first_name, last_name, date_added) ('john', 'smith', '1/1/2005 12:00:00pm') ;
SELECT SCOPE_IDENTITY() AS [Scope_Identity]

This works fine unless there's already a John Smith in the database. When that happens, Scope_Identity is null even though the date_added is different. About half the time the record is added even though Scope_Identity is null. I've added code to notify me when this happens, but it's a pain in the neck to re-run my import utility for individual records.

(The table I'm adding to does have a autonumbered key field)

Thanks in advance!



View 1 Replies View Related

Sql Not Returning Any Data

Feb 20, 2007

Hello,
Im currently working on a asp.net file hosting wesite, and im being faced with some problems
I currently have 4 sql tables. DownloadTable, MusicTable, ImageTable and VideoTable. Each of those tables contain a UserName column, a fileSize column and sme other columns. What i want to do is add up all the values in the fileSize column, for each table, and then add them up with the tables, and return one value, and all this happens where the UserName column corresponds to the UserName of the currently logged on User.
I already have an sql statement that performs this exact thing. It is as follow
select TotalDownLoadSize = sum(DownloadSize) + (select sum(VideoSize) from VideoTable where ([UserName] = @UserName ) ) + (select sum(ImageSize) from Images where ([UserName] = @UserName) ) + (select sum(MusicSize) from MusicTable where ([UserName] = @UserName) ) from DownloadTable where ([UserName] = @UserName)
But the problem is that all of the tables have to have a value in there size columns for the corresponding user, for this sql statement to return something.
For example, lets say i logged in as jon. If, for the UserName jon, the sum of DownloadTable returned 200, the sum of VideoTable returned 300, the sum of MusicTable returned 100. The sql statement i stated above will return 4 instead of 600, if the sum of ImageTable returned zero.
Is there  way around this?
Im not sure if ive been cleared enough, please feel free to request more info as needed.
Thank you very much, and thx in advance.

View 5 Replies View Related

TableAdapter/DataTable Query Returning No Results

Sep 6, 2007

Hello,
I have a query that works in query analyzer; it looks that a certain date is between the start and end date of a certain value.  I also have a status field, which can be null, but if provided, provides the appropriate status to filter by.
Again, the query works in QA, but not in the application.  I test in SQL by using start date = '1/1/1900', end date = '12/31/9999', and status = null.  Results are returned.  But, not when the results are done through code.  In code, I set the begin date to new DateTime(1900, 1, 1), the end date to DateTime.MaxValue, and the status to a null string.  But, no results are returning.  Why isn't that mapping over correctly?  In the function, it has the two dates as Nullable(Of DateTime), which I provide a date, and the string is getting passed Nothing.
Any ideas?  Can't post any code on this one...
Thanks.

View 5 Replies View Related

Returning Number Of Records Found In Query

Jan 24, 2008

I am trying to return the number of records found by the query but keep seeing -1 in label1. This query should return many records.
         sub findcustomers(sender as object,e as eventargs)            dim connection1 as sqlconnection=new sqlconnection(...)            dim q1 as string="select * from tblcustomers where store='65'"            dim command1 as sqlcommand=new sqlcommand(q1,connection1)            dim a as integer            command1.connection.open()            a=command1.executenonquery()            label1.text=a.tostring()            command1.connection.close()         end sub
What am I doing wrong?

View 8 Replies View Related

Query Returning Multiple Wrong Values

Jan 16, 2013

I've got this sql statement that keeps returning the wrong data. (it's related to a previous post, but is different)

Code:
SELECT C.NAME, OL.PART_ID, SL.SHIPPED_QTY
FROM CUSTOMER C
INNER JOIN USERS U ON C.ID = U.ID
INNER JOIN ORDERS O ON C.ID = O.ID
INNER JOIN ORDER_LINE OL ON O.ID = OL.ORDER_ID

[Code] .....

The qry pulls like this: (wrong way)

HTML Code:
company partID Qty
Acme Inc ABC123 3
Acme Inc ABC123 4
Acme Inc ABC123 100
Acme Inc KLM444 3
Acme Inc KLM444 4
Acme Inc KLM444 100
Acme Inc QRP456 3
Acme Inc QRP456 4
Acme Inc QRP456 100

It should be:

HTML Code:
Co. part Qty
Acme Inc ABC123 3
Acme Inc KLM444 4
Acme Inc QRP456 100

The Qty field has duplicates. I've tried various ways, but I cannot make this work.

View 14 Replies View Related

Problem Query Returning Float With Comma

Mar 18, 2004

I to all

i am bilding a web page, using asp and sql server

I have a few querys in the asp script. my problem is that the values from the query results to tables with float fiels, apear with a comma
and want a dot

like area= 23,5 and I would like to have area= 23.5

in the query analyser there is no problem it´s all dots
i have my web aplication running in 3 diferent machines and in 2 of them i dont have this problem. the query results to float fiels apear with a dot

in the 3 machines the database is the same , the odbc conection is similar. i have win xp professional in 2 machines and win 2000 server in other. the machine with this problem has xp pro

something i miss in the IIS...

i am lost

some hint would be very nice

thanks for your time and replay

View 1 Replies View Related

Correlated Query Returning Only 1 Record And Repeat

Aug 10, 2014

I have SQL query/dual sub-query in MS Access that is returning data from the left side of the query FROM correctly, but is only returning one record from the right side of the query FROM. Furthermore, it repeats the display of the one record and it repeats the entire results set with a different one record each time until all the records have been displayed. I expect that problems described as “Furthermore” will not exist by fixing the one record issue. I have tried using all the join types available in MS Access, but none change the result.

The desired output is:

Yellow Blue
11/23/201311/19/2013
11/19/210310/01/2012
10/01/210210/08/2010
10/08/201012/14/2007

The actual output is:

Yellow Blue
11/23/201311/19/2013
11/19/210311/19/2013
10/01/210211/19/2013
10/08/201011/19/2013
11/23/201310/01/2102
11/19/210310/01/2102
10/01/210210/01/2102
10/08/201010/01/2102

The same pattern is repeated 2 more times with Blue values of 10/08/2010 and then 12/14/2007.

Here is the SQL:

SELECT Long_List.Yellow,Short_List.Blue
FROM
(
SELECT DISTINCT BirthDate AS Blue
FROM (
SELECT DISTINCT BirthDate FROM citizens

[Code] .....

View 9 Replies View Related

Query Returning 1.7million Records Slow

Nov 23, 2005

Hi,I have a sql server database with 1.7 million records in a table, withabout 30 fieldsWhen I run select * from tablename it can take over 5 minutes.How can I get this time down or is it normal?ThanksJerry

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved