My actual Need: I need see what are the tables in database which got updated(either by insertion or update) by getting some information about tables not by using triggers.
1.I figured it out that can be done by using transaction log.as given below:
I need to access data recorded in my transaction log.but,when i try to open that file i am able to see only junk values.
Can anybody suggest me how to read that data by using any sql query or using any 3rd party application.
2.Can i get to know this information about this using any of system tables its well in good.
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON Begin distributed Tran update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 and DONE = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
I am getting this error :Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
I have a table with the following columns: Rtype, Amount, Refnumber, Color: Here is what the table looks like:
RD 25 1 blue AB 45 2 green AC 25 3 purple AD 34 4 blue AE 25 5 pink
Now lets say I would like to create new transactions for all 'RD' Rtypes, but I would like to change the Amount to lets say, 99 for all of 'RD' types, but keep the same refNumber. For example, I want to create and insert a new transaction for RD, but with the amount 99, so that the row looks like this:
RD 99 1 blue
Where do I put in the query to change the Amount value? I do not wish to use the update function, because I actually want to create a new row. The query I am using, but not working is:
INSERT INTO EMPLOYEES(Rtype, Amount, Refnumber, Color) SELECT Rtype, Amount, Refnumber, Color FROM Employees WHERE Rtype = 'RD'; Reply With Quote
My website is in asp and sql2000. My problem is the ISP gave access to database through query analyser. some days the transaction log is growing too high. so i want to clear it. i call up them and clear it. My question is can truncate the log file through query analyser ? I had limited access to database.
I have a query batch "update" script that upgrades my users database from,say version 0 to version 1, or from version 1 to version 2. I would like toknow how I can wrap the entire script in a transaction, so that either thewhole thing succeeds or none of it does.For example:BEGIN TRANSACTION.......... Alter some tables.....GO.......... Alter a stored procedure.....GO.......... Create a new stored procedure.....GOCOMMIT TRANSACTIONorROLLBACK TRANSACTIONGO(how do I get to the "ROLLBACK TRANSACTION" if an error occurs in the updatescript?)
Hi Guys, I am generating Transaction Activity report,which should get data by weekly.Report shold look like this.
W1 W2 W3 W4 W5 W6
OKC 79 38 50 76 35 47
NFL 0 0 45 43 33 28
LA
5
12
10
0
0
10
Total 79 38 95 119 68 75
Iam passing 3 parameters @startdate,@enddate,@Market. when i select one Market(OKC/NFL/LA), report generating properly, but when i passing 3 markets values(OKC,NFL,LA), iam getting wrong report,report format is not correct.I used Cross tab for generating this report.Result lam getting like this.
W37 W38 W39 W40 W41 W42 W43 W44 W45
OKC 80
OKC
38
OKC
95
OKC
119
OKC
68
OKC
75
OKC
74
OKC
70
OKC
59
OKC
OKC
LA
And i wrote query like this,
select m.Market_name as Market,'W'+datename(ww,ut.creation_date) as Week,count(ut.transaction_id) as Count from POS.DSC_TRANSACTION_STATUS_VL ts inner join POS.DSC_USER_TRANSACTION ut on ts.transaction_status=ut.transaction_status inner join POS.RETAIL_LOCATION rl on ut.rl_number=rl.rl_number inner join POS.BILLING_MARKETS bm on rl.bm_code=bm.bm_code inner join dbo.Market m on bm.market_id=m.market_id where (ut.creation_date between @startdate and @enddate) and m.market_name IN(@Market) group by m.Market_name,ut.creation_date order by m.Market_name desc
Could you please some one help me to get this correctly.
Hello, I have problem for insert multiple query for insert in differenr tabels for a single record. I have mail record for candidate and now i wants to insert candiate labour info, candidate passport detail in diff tabel like candidatLabour and candidatePassport, i used two store procedure for it and i write code for it.and it works fine,but i think that if one SP executed and one record inserted but then some problem occure and 2nd SP not executed then........... so plz help me Thanks
I have this problem of inserting my query into database field. My code is as of below. The @AVERAGESCORE parameter is derived from Dim averagescore As Single = (122 * 1 + 159 * 2 + 18 * 3 + 3 * 4 + 0 * 5) / (122 + 159 + 18 + 3 + 0) and the value returned is (averagescore.toString("0.00")) However, I have error inserting the averagescore variable into a field of datatype float during the transaction. I have no problems when using non transactional sql insert methods. What could be the problem? Try Dim i As Integer For i = 0 To arraySql.Count - 1 myCommand = New SqlCommand Dim consolidatedobjitem As ConsolidatedObjItem = arraySql(i) myCommand.CommandText = sqlStr myCommand.Connection = myConnection myCommand.Transaction = myTrans With myCommand.Parameters
End With myCommand.ExecuteNonQuery() Next myTrans.Commit() myConnection.Close() Catch ex As Exception Console.Write(ex.Message) myTrans.Rollback() myConnection.Close() End Try
Here the SELECT query is fetching the records corresponding to ITEM_DESCRIPTION in 5 separate transactions. How to change the cursor to display the 5 records in at a time in single transactions.
CREATE TABLE #ITEMS (ITEM_ID uniqueidentifier NOT NULL, ITEM_DESCRIPTION VARCHAR(250) NOT NULL)INSERT INTO #ITEMSVALUES(NEWID(), 'This is a wonderful car'),(NEWID(), 'This is a fast bike'),(NEWID(), 'This is a expensive aeroplane'),(NEWID(), 'This is a cheap bicycle'),(NEWID(), 'This is a dream holiday') --- DECLARE @ITEM_ID uniqueidentifier DECLARE ITEM_CURSOR CURSOR
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query: WITH MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]) SELECT NON EMPTY {SPEND} ON 0 ,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1 FROM [CUBE]
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
********************************* For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported) Finish Sequence A ( transaction should stop here) UPDATE Oracle DB ( Execute SQLTask, transaction=not supported) If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported) Finish Sequence A ( transaction should stop here) UPDATE Oracle DB ( Execute SQLTask, transaction=not supported) If (Certain_Field_Value = 'C')
------------ ------------ End ForEach Loop ************************************* My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction. But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ". What is it that I am doing wrong? Regards KyawAM
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ] OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
I am executing a stored procedure something like this
Create Procedure TEST @test1 @test2 AS BeGIN TRANSACTION ONE SELECT... UPDATE.. .... ....
.... TRUNCATE etc and lot of Select,update and delete statements like this ..... COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one. IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
---------------------------------------------- dim conn, connectionstring
connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"
set conn = server.CreateObject("adodb.connection") conn.open connectionstring
----------------------------------------------
It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:
"Microsoft OLE DB Provider for SQL Server error '8004d00a'
New transaction cannot enlist in the specified transaction coordinator. "
I've never encountered this error before and I couldn't think of any solution... please help!!!
I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)
For instance, run these statements to set up a test: --DROP TABLE testTable1 --DROP TABLE testTable2 CREATE TABLE testTable1 (f1 varchar(1)) CREATE TABLE testTable2 (f1 varchar(1)) CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1) insert into testTable1(f1) values ('a')
So table testTable1 has a unique index on it..
Now try to run these statements:
--DELETE FROM testTable2 BEGIN TRANSACTION insert into testTable1(f1) values ('a') insert into testTable2(f1) values ('a') COMMIT TRANSACTION
SELECT * FROM testTable2
..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?
Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK
Configuration
Head office :Windows 2003 SP1 and Sql Server 2000 SP3
Failing Store:Windows 2003 SP2 and SQL SERVER 2005
Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000
At Store: Setting for MSDTC
Log on Account for MSDTC Service : Network Service
Network DTC Access = True
Allow Inbound = True
Allow Outbound = True
No Authentication Required = True
TurnOffRPCSecurity = 1
port Ranges for RPC = 5000- 5100
The error Message is as follows:
(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction. ) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )
If any one can help me, that will be great!!! Thanks in advance
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False 'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i ' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
