Hello,
I have a table with 1 column containing numeric values, and I need to create a query which displays the count of values for each set of conditions. For example, if the table contains the values 1,2,3,4,5 and 6, the output of the query should look like this:
L M H
-----------------------
3 2 1
(L are values below 4, M between 4 and 5, H is 6 and above)
Any suggestions?
TIA
Hi I have a table which has couple of name cols and 10 varchar columns. The requirement was to retain the first two cols but convert the 10 cols into a single XMl.
the table has this schema;
ManagerName varchar
UserName varchar
TextField1 Varchar
TextField2 Varchar
TextField3 Varchar
TextField4 Varchar
TextField5 Varchar
TextField6 Varchar
TextField7 Varchar
TextField8 Varchar
TextField9 Varchar
TextField10 Varchar
I wrote a query like;
SELECT
TPD.[NameId]
,CrtdUser.[UserId]
from [Olddb_DB] TPD
join
[NewDB]..[Manager]CrtdUser
on
Crtduser.managerName = TPD.ManagerName
join
[NewDB]..[Users]Users
on
Users.[loginDetail] = TPD.[UserName]
to get the cols other than the XML
/*********/
SELECT
XmlDat.[textField1],
XmlDat.[textField2],
XmlDat.[textField3],
XmlDat.[textField4],
XmlDat.[textField5],
XmlDat.[textField6],
XmlDat.[textField7],
XmlDat.[textField8],
XmlDat.[textField9],
XmlDat.[textField10],
XmlDat.[textField11],
XmlDat.[textField12]
from
[olddb_db]..[DETAIL_DEF] XmlDat,[NEWDB]..[Detail_Def]TPD
where TPD.Name = XmlDat.Name
for XML AUTO, ELEMENTS
and this query to convert all the varchar cols to a XML. Now the problem is I am not sure of how to combine both these queries to Insert into the new table.
Can someone guide me in this
the destination table looks like
Name (Varchar)
UserId (int)
UserVal_XMl (XML)
Thanks in advance
hello
i am a beginner
i it possible to get this result by single query ?
i got a int column and a datetime column
is it possible to get the sum(int column) for all the year 2007 and by the april2007 and by the month n year by the person name Tony
so the end result will look like this
year 2007 | current_month | tonys_group
-----------------------------------------------
$ 222 $22 $2
I am using 3 tables: projects, project_manager and project_employee
projects
- project_id (int, PK)
- project_name
project_manager
- project_id (int, PK)
- manager_id (int, PK)
project_employee
- project_id (int, PK)
- employee_id (int, PK)
Assume that a manager is currently logged in (so we know what is his ID), what I trying to do is write a query that will display a grid-view showing:
project_id, project_name and number of employees in project.
I tried these quires to test:
SELECT project_id, count(emp_id) as NumberOfEmployees into #tempTable FROM project_employee WHERE project_id IN (SELECT project_id FrOM projects) GROUP BY project_id
SELECT projects.project_id, projects.project_name, NumberOfEmployees FROM projects, #tempTable WHERE projects.project_id = #tempTable.project_id
Problems are:
1 - I used two queries not one
2 - The result is for all projects of all managers, I just want to display projects for a specific manager (for example mag_id = 5)
3 - it created a temporary table - which I dont want.
Is there anyway to get what I want in a single query?
Here the SELECT query is fetching the records corresponding to ITEM_DESCRIPTION in 5 separate transactions. How to change the cursor to display the 5 records in at a time in single transactions.
CREATE TABLE #ITEMS (ITEM_ID uniqueidentifier NOT NULL, ITEM_DESCRIPTION VARCHAR(250) NOT NULL)INSERT INTO #ITEMSVALUES(NEWID(), 'This is a wonderful car'),(NEWID(), 'This is a fast bike'),(NEWID(), 'This is a expensive aeroplane'),(NEWID(), 'This is a cheap bicycle'),(NEWID(), 'This is a dream holiday')
---
DECLARE @ITEM_ID uniqueidentifier
DECLARE ITEM_CURSOR CURSOR
[Code] ....
my table
id; part_name ; part_desc
01; xpto ; descr
02; qwerty ; azerty
03; azerty ; descr xpto
I want to search from two columns
something similar to :
SELECT * FROM tools WHERE (part_name LIKE @parameter_search or part_desc LIKE @parameter_search);
If i search for "xpto" only the first line would show.
How can i solve/go around this?
HI,
I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes
I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record
Thanks for your help
Ali
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
I have two tables that have no relation. However, both have a column which has a field of nvarchar(50) that I want to retrieve together in one operation and bind to a DropDownList in a sorted fashion. So, what I'm trying to achieve is this:
1. SELECT name FROM table1
2. SELECT name FROM table2
3. Join the two results together and order them alphabetically
4. Return the result set
I'm not sure how to do this or even if it's possible. Ideally I'm hoping it can be done in a stored proc.
Hi again,
I'd appreciate advice on the following. Thanks very much!
Given this Table:
family|product|type
fam1 |abc |XX
fam1 |def |YY
What query would return this?
Family|Type1|Type2
fam1 |xx |yy
--PhB
I have the following table
CREATE Table #Table1
(
ID INT, Name VARCHAR(50), Class VARCHAR(10)
)
INSERT INTO #Table1
Select 1, 'name1', 'a' UNION ALL
Select 2, 'name1', 'a' UNION ALL
[Code] ....
Is it possible to have each name and its corresponding class in a single line separated by commas to give a result like the one below in #table2 ?
CREATE Table #Table2
(
ID INT, CommaSeparated VARCHAR(100)
)
INSERT INTO #Table2
Select 1, 'name1, a' UNION ALL
[Code] ...
What I have
Select * FROM #Table1
Final Result
Select * FROM #Table2
Note that I still want to see all the IDs regardless.
If that is not possible to see all the IDs, I think the results below in #Table3 should suffice.
CREATE Table #Table3
(
CommaSeparated VARCHAR(100)
)
INSERT INTO #Table3
Select 'name1, a' UNION ALL
Select 'name2, b, c, d' UNION ALL
Select 'name3, e, f'
Select * FROM #Table3
Hello, I have an SQL problem that is hard to describe so here's an example scenario:
a) company has a personnel database, identifying each person in the company and their assigned role(s).
b) tblPersonnel has a row per person, key is 'PersonnelID'
c) tblRoles is a list of all the roles in the company (administrator, clerk, shipper, truck-driver, etc.), key is 'RoleID'
d) tblPersonnelRoles is a cross-reference of all the roles assigned to each person - in simple format of:
PersonnelID | RoleID
Given all the above, I need to have a select statement that produces one row per person, and list all the fields from tblPersonnel AS WELL AS identifies each role assigned to the person.
I'm no SQL guru .. is this even possible?
I know there are alternative solutions (e.g., to write code that for each Personnel does a lookup in Roles) but for one particular situation I need a single SQL statement, or even Stored Procedure.
Thanks in advance,
Rick Piovesan
Detaya Corp
Aurora, Ontario, Canada
Hello,
In SQL Server SELECT query Result displays tablePlease
tell how to create stored procedure for a single row at a time i.e. all only ONE row is
displayed at a time exselect name from useswhere name is display is tabular format,but i need in row with coma anc,d,f,f,e,g,h,jin this wayhow can i write a stored procedure for that
I set up a connection to mysql using ADO.NET's ODBC Data Provider. And I'm running a simple query to return one table's maximum ID(int32 unsigned).But when I bind the result to a variable and excute task. It gives out error message: "An error occurred while assigning a value to variable "MaxAuditLogID": "Result binding by name "MaxID" is not supported for this connection type. " I tried to change the type of variable around but with no luck.
View 5 Replies View RelatedI set up a connection to mysql using ADO.NET's ODBC Data Provider. And I'm running a simple query to return one table's maximum ID(int32 unsigned). There is no problem to achieve that.
But when I bind the result to a variable and excute task. It gives out error message: "An error occurred while assigning a value to variable "MaxAuditLogID": "Result binding by name "MaxID" is not supported for this connection type. "
I tried to change the type of variable around but with no luck.
Could anyone help with this issue? Thanks!
I have a XML column in my source DB. Is there any way possible using SSIS to convert the XML to ordinaty cols (varchar) in the destination db.
I am using Sql 2k5.
thanks in advance
Hi
There is a table which has repeated values in more than one col.
I want to view all the distinct values for both the cols
for eg
col1 col2 col3
A B D
A B E
B C E
B C F
I want the output as
col1 col2
A B
B C
cheers
Vic
Vicky
I'd like to know if I can make one proc/cursor that I can pass only a table name and it will determine what cols exist in the table?
AND, what is the syntax for such a query?
I will be receiving data back where I will receive the accountID and only the deltas will have values all other columns will be null.
My proc will update an existing record, updating the specific col when an accountID exists, it will create a new record if the accountID does not exist.
I'd like to search all the cols getting their names and values when not null.
I can construct a proc for each table searching each col by known name.
However, I'd like to know if I can make one proc/cursor that I can pass only a table name and it will determine the cols?
All my tables start with cols AccountID and end with RecID with any number of cols inbetween.
TIA
JeffP...
cross posted to ms.pub.mssqlserver.programming
Hi,
How can we use two identity column (with identity property) in table ?
GK
gk
I have about 30 tabs with same struture.
I want to simple put column 2 in all 30 table in a new table without joining on anything. Is there a way to do that?
Thanks
JP
I have data in rows that I need to aggregate and display in a columnar fashion and I haven't been able to figure out how to do it. A simplified version of the data as it is stored in the table:
Station Month Day Reading
1 1 1 100
1 1 2 200
1 1 3 300
1 2 1 400
1 2 2 500
And I would like to create a query that returns:
Station Month Day 1 Day 2 Day 3
1 1 100 200 300
1 2 400 500
Any help you can provide or tips to steer me in the right direction are much appreciated.
Dianne Siebold
For ex.
Table Match_List ( MatchID, UserID_A, UserID_B)
constraints like
MatchID primary key
UserID_A <> UserID_B
unqiue index (UserID_A,UserID_B)
but I wish to exclude duplicated rows like 1,1,2 & 2,2,1,
cause UserA to UserB, and UserB to UserA are the same thing.
How can I get this?
Hi,
With reference to http://www.intelligententerprise.com/001020/celko.jhtml?_requestid=235427
I want the "sql stmt" which wud give the lft and rgt col values..
i am reading his book but cant understand :eek: where he explains
wat lft and rgt cols are..
"The root is always (lft,rgt) (1, 2*(Select count(*)from table) and leaft nodes are (lft+1=rgt)" :S
Hello ,
I need to make the automatic subtotal column in most right position in a matrix wider than the data columns , i faild so far and discovered that its width is proportional to the data column width , its logic for the total column to be wider since its value is sum(all left data columns)
any way around this ?
thanks
Bassam
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID
FROM tableU u
LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies View RelatedI have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).
To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:
COLUMN_NAME Value
----------- -----
colB 123
colA XYZ
I've tried dynamic SQL to no success, probably not executing the concept correctly...
Below is what I have:
CREATE TABLE myTable (colA VARCHAR(3), colB VARCHAR(3), colC VARCHAR(3))
INSERT INTO myTable (colA, colB, colC) VALUES ('ABC', '123', '0X')
INSERT INTO myTable (colA, colB, colC) VALUES ('XYZ', '789', 'X0')
;WITH cte AS
(
SELECT CAST(PATINDEX('%[^0]%', colC) AS SMALLINT) pos, STUFF(colC, 1, PATINDEX('%[^0]%', colC), '') colC
[Code] ....
CREATE TABLE [RS_A] ([ColA] [varchar] (10)[ColB] [int] NULL)CREATE TABLE [RS_B] ([ColA] [varchar] (10)[ColB] [int] NULL)INSERT INTO RS_AVALUES ('hemingway' , 1)INSERT INTO RS_AVALUES ('vidal' , 2)INSERT INTO RS_AVALUES ('dickens' , 3)INSERT INTO RS_AVALUES ('rushdie' , 4)INSERT INTO RS_BVALUES ('hemingway' , 1)INSERT INTO RS_BVALUES ('vidal' , 2)I need to find all the rows in A which do not exist in Bby matching on both ColA and ColBso the output should bedickens 3rushdie 4So if i write a query like this , I dont get the right result setSELECT A.ColA, A.ColBFROMRS_A AINNERJOIN RS_B BONA.ColA <B.ColAORB.ColB <B.ColBBut if i do the following, i do get the right result, but followingseems convoluted.SELECT A.ColA, A.ColBFROMRS_A AWHERE ColA + CAST(ColB AS VARCHAR)NOT IN (SELECT ColA+CAST(ColB AS VARCHAR) FROMRS_B B)
View 6 Replies View RelatedI'm having a bit of a trouble explaining what I'm trying to do here.
I have 3 "source" tables and a "connecting" table that I'm going to use
tblContacts - with contactID, ContactName etc
tblGroups - with GroupID, GroupName
tblSubGroups - with SubGroupID, GroupID and SubGroupName (groupID is the ID for the parent Group from tblGroups)
They are related in a table called
tblContactsGroupConnection - with ContactID, GroupID and SubGroupID
One contact can be related to many subgroups.
What I want is a list of all contacts, with their IDs, names and what groups they are related to:
ContactID, ContactName, [SubGroupName1, SubGroupName2, SubGroupName3]
ContactID, ContactName, [SubGroupName1, SubGroupName3]
ContactID, ContactName, [SubGroupName3]
I'm sure there's a simple solution to this, but I can't find it. Any help appreciated. :)
Kirikiri
We can save query output save as CSV file directly from the Query Analyzer window. I have done it at last few year before. Now I need it.Can anyone please give the one example for the same.
Thanks
Amit K Patel
Hi,
Please help me with an SQL Query that fetches all the records from the three tables but a unique record for each forum and topicid with the maximum lastpostdate. I have to bind the result to a GridView.Please provide separate solutions for SqlServer2000/2005.
I have three tables namely – Forums,Topics and Threads in SQL Server2000 (scripts for table creation and insertion of test data given at the end). Now, I have formulated a query as below :-
SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads
FROM
Forums f FULL JOIN Topics t ON f.forumid=t.forumid
FULL JOIN Threads th ON t.topicid=th.topicid
GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate
ORDER BY t.topicid ASC,th.lastpostdate DESC
Whose result set is as below:-
forumid
topicid
name
author
lastpostdate
NoOfThreads
1
1
Java Overall
x@y.com
2008-01-27 14:48:53.000
2
1
1
Java Overall
a@b.com
2008-01-27 14:44:29.000
2
1
2
JSP
NULL
NULL
0
1
3
EJB
NULL
NULL
0
1
4
Swings
p@q.com
2008-01-27 15:12:51.000
1
1
5
AWT
NULL
NULL
0
1
6
Web Services
NULL
NULL
0
1
7
JMS
NULL
NULL
0
1
8
XML,HTML
NULL
NULL
0
1
9
Javascript
NULL
NULL
0
2
10
Oracle
NULL
NULL
0
2
11
Sql Server
NULL
NULL
0
2
12
MySQL
NULL
NULL
0
3
13
CSS
NULL
NULL
0
3
14
FLASH/DHTLML
NULL
NULL
0
4
15
Best Practices
NULL
NULL
0
4
16
Longue
NULL
NULL
0
5
17
General
NULL
NULL
0
On modifying the query to:-
SELECT ALL f.forumid,t.topicid,t.name,th.author,th.lastpostdate,(select count(threadid) from threads where topicid=t.topicid) as NoOfThreads
FROM
Forums f FULL JOIN Topics t ON f.forumid=t.forumid
FULL JOIN Threads th ON t.topicid=th.topicid
GROUP BY t.topicid,f.forumid,t.name,th.author,th.lastpostdate
HAVING th.lastpostdate=(select max(lastpostdate)from threads where topicid=t.topicid)
ORDER BY t.topicid ASC,th.lastpostdate DESC
I get the result set as below:-
forumid
topicid
name
author
lastpostdate
NoOfThreads
1
1
Java Overall
x@y.com
2008-01-27 14:48:53.000
2
1
4
Swings
p@q.com
2008-01-27 15:12:51.000
1
I want the result set as follows:-
forumid
topicid
name
author
lastpostdate
NoOfThreads
1
1
Java Overall
x@y.com
2008-01-27 14:48:53.000
2
1
2
JSP
NULL
NULL
0
1
3
EJB
NULL
NULL
0
1
4
Swings
p@q.com
2008-01-27 15:12:51.000
1
1
5
AWT
NULL
NULL
0
1
6
Web Services
NULL
NULL
0
1
7
JMS
NULL
NULL
0
1
8
XML,HTML
NULL
NULL
0
1
9
Javascript
NULL
NULL
0
2
10
Oracle
NULL
NULL
0
2
11
Sql Server
NULL
NULL
0
2
12
MySQL
NULL
NULL
0
3
13
CSS
NULL
NULL
0
3
14
FLASH/DHTLML
NULL
NULL
0
4
15
Best Practices
NULL
NULL
0
4
16
Longue
NULL
NULL
0
5
17
General
NULL
NULL
0 I want all the rows from the Forums,Topics and Threads table and the row with the maximum date (the last post date of the thread) as shown above.
The scripts for creating the tables and inserting test data is as follows in an already created database:-
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Topics__forumid__79A81403]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1)
ALTER TABLE [dbo].[Topics] DROP CONSTRAINT FK__Topics__forumid__79A81403
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[FK__Threads__topicid__7C8480AE]') and OBJECTPROPERTY(id, N'IsForeignKey') = 1)
ALTER TABLE [dbo].[Threads] DROP CONSTRAINT FK__Threads__topicid__7C8480AE
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Forums]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Forums]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Threads]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Threads]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Topics]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Topics]
GO
CREATE TABLE [dbo].[Forums] (
[forumid] [int] IDENTITY (1, 1) NOT NULL ,
[name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[Threads] (
[threadid] [int] IDENTITY (1, 1) NOT NULL ,
[topicid] [int] NOT NULL ,
[subject] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[replies] [int] NOT NULL ,
[author] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[lastpostdate] [datetime] NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[Topics] (
[topicid] [int] IDENTITY (1, 1) NOT NULL ,
[forumid] [int] NULL ,
[name] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[description] [varchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Forums] ADD
PRIMARY KEY CLUSTERED
(
[forumid]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Threads] ADD
PRIMARY KEY CLUSTERED
(
[threadid]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Topics] ADD
PRIMARY KEY CLUSTERED
(
[topicid]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Threads] ADD
FOREIGN KEY
(
[topicid]
) REFERENCES [dbo].[Topics] (
[topicid]
)
GO
ALTER TABLE [dbo].[Topics] ADD
FOREIGN KEY
(
[forumid]
) REFERENCES [dbo].[Forums] (
[forumid]
)
GO
------------------------------------------------------
insert into forums(name,description) values('Developers','Developers Forum');
insert into forums(name,description) values('Database','Database Forum');
insert into forums(name,description) values('Desginers','Designers Forum');
insert into forums(name,description) values('Architects','Architects Forum');
insert into forums(name,description) values('General','General Forum');
insert into topics(forumid,name,description) values(1,'Java Overall','Topic Java Overall');
insert into topics(forumid,name,description) values(1,'JSP','Topic JSP');
insert into topics(forumid,name,description) values(1,'EJB','Topic Enterprise Java Beans');
insert into topics(forumid,name,description) values(1,'Swings','Topic Swings');
insert into topics(forumid,name,description) values(1,'AWT','Topic AWT');
insert into topics(forumid,name,description) values(1,'Web Services','Topic Web Services');
insert into topics(forumid,name,description) values(1,'JMS','Topic JMS');
insert into topics(forumid,name,description) values(1,'XML,HTML','XML/HTML');
insert into topics(forumid,name,description) values(1,'Javascript','Javascript');
insert into topics(forumid,name,description) values(2,'Oracle','Topic Oracle');
insert into topics(forumid,name,description) values(2,'Sql Server','Sql Server');
insert into topics(forumid,name,description) values(2,'MySQL','Topic MySQL');
insert into topics(forumid,name,description) values(3,'CSS','Topic CSS');
insert into topics(forumid,name,description) values(3,'FLASH/DHTLML','Topic FLASH/DHTLML');
insert into topics(forumid,name,description) values(4,'Best Practices','Best Practices');
insert into topics(forumid,name,description) values(4,'Longue','Longue');
insert into topics(forumid,name,description) values(5,'General','General Discussion');
insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'About Java Tutorial',2,'a@b.com','1/27/2008 02:44:29 PM');
insert into threads(topicid,subject,replies,author,lastpostdate) values (1,'Java Basics',0,'x@y.com','1/27/2008 02:48:53 PM');
insert into threads(topicid,subject,replies,author,lastpostdate) values (4,'Swings',0,'p@q.com','1/27/2008 03:12:51 PM');
Hi to all,I just need to get two fields from a table and manipulate the resultsin next query of a procedure.I planned to code like what you seebelow,create procedure marks1as@ sql1 as varchar(50)@ sql1=select registerno ,subjectcode from mark;beginselect * from marksetting where registerno='@sql1.registerno' andsubjectcode='@sql1.subjectcode';endcan it be possible to get the results as shown in the code? elsepropose an alternative for this scenario.Thanks in Advance.
View 4 Replies View Related