Query To Show Today And Upcoming Event From Current Month
Aug 27, 2015
Here is my query
SELECT id, (CONVERT(datetime, event_date)) AS event_date, xmlfilename, event_active FROM test WHERE (YEAR(event_date) >= YEAR(GETDATE())) AND (MONTH(event_date) >= MONTH(GETDATE())) AND (DAY(event_date) >= DAY(GETDATE())) ORDER BY event_date ASC
The above query shows me event only upcoming event from the current month.
I want to list all the events happening today and future. I do not want to show past event. How to do this?
I would like to AUTOMATICALLY count the event for the month BEFORE today
and
count the events remaining in the month (including those for today).
I can count the events remaining in the month manually with this query (today being March 20):
SELECT Count(EventID) AS [Left for Month], FROM RECalendar WHERE (EventTimeBegin >= DATEADD(DAY, 1, (CONVERT(char(10), GETDATE(), 101))) AND EventTimeBegin < DATEADD(DAY, 12, (CONVERT(char(10), GETDATE(), 101))))
Could anyone provide me with the correct syntax to count the events for the current month before today
and
to count the events remaining in the month, including today.
how would i take the query and show just the current months unique logins
SELECT DISTINCT YEAR(Login_Time) AS Year, MONTH(Login_Time) AS Month, COUNT(*) AS Login_Cnt FROM Login WHERE Login_Time >=#10/1/2005# GROUP BY YEAR(Login_Time), MONTH(Login_Time) ORDER BY YEAR(Login_Time), MONTH(Login_Time)
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
Hi,I have a simple table called events, which lists the start and end dates of events. I'm using a calendar control that queries the db for events, but at the moment it does a check for every day by passing in the day. (Very inefficient) What I'd like to do is pass in the current month, and get a set of rows that have an event which is in that month. It sounds easy, but I'm a little confused about what to do if the event starts current month -1 and ends currentmonth +1 I obviously need to return results like these also.
I am writing a usage query, I need to determine what the current month and year is. If the current month is 1, then I need Year-1. I keep getting this error Line 5: Incorrect syntax near '='. If I comment out the case statement just evaluate the (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))or (YEAR(User_Date) = YEAR(GETDATE())) by itself, the query works. What I am missing? Anybody?1 SELECT CONVERT(char(10), User_Date, 101) AS userdate, COUNT(*) AS CNT, User_Name2 FROM Users3 WHERE (User_Name = 'Joe Bob') AND (MONTH(User_Date) = MONTH(DATEADD(mm, - 1, GETDATE()))) AND 4 case MONTH(User_Date) when 1 then 5 (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))6 else (YEAR(User_Date) = YEAR(GETDATE()))7 END8 GROUP BY CONVERT(char(10), User_Date, 101), User_Name9 ORDER BY CONVERT(char(10), User_Date, 101), User_Name
Hi, I'm dabbling in trying to retrieve some info from an SQL database and publish it in Sharepoint data view. I'm trying to create a View in the SQL database that retrieves all records for the current month. So that in July, it automatically shows me July records, and when August ticks over, it automatically displays August's records. I can hard code the dates in to the query no probs (e.g. a statement like ENTRYDATE >= '1/07/2007') but was hoping there is a way to specify current month. So maybe the statement looks like ENTRYDATE >= "CURRENTMONTH".
Hello. I have an "Events" table with a datetime column containing dates (the time is unnecessary). I want to select an upcoming event (one post) from the table where the date is either today or the day nearest to today. Dim today As Date = Date.Now I have declared a 'today' variable but I don't know how to use it in the SQL query. Will I have to convert the today variable to something before using it? Should a Label be involved? The event will be displayed in DetailsView.
I need to get everything from today to the end of the month. So for example, if it was august 3rd, I would need everything from August 3rd to August 31st. I can't hard code the date in, so is there any way to do this dynamically? This is what I have by hardcoding it in:
select unit.dtavailable, unit.hmy from unit inner join property on property.hmy = unit.hproperty inner join unit_status on unit_status.hunit = unit.hmy where unit_status.sstatus = 'Notice Unrented' and property.hmy = '21' and unit.dtavailable > getdate() and unit.dtavailable <= '07/31/2006'
I have two tables Costtable (Id,ResourceId, Amount,Date) and ResourceTable (ResourceId,Name) which shows output as below.
I want to show 0 amount for rest of the name in case of September. For e.g. if rest of the Resources does not appear in cost table they should appear 0 in amount
My Desired output
My current query
SELECT RG.Id AS Id, RG.Name AS Name, ISNULL(SUM(AC.Amount), 0) AS Amount, RIGHT(CONVERT(varchar(10), AC.[Date], 105), 7) AS [YearMonth]
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29 if we pass year =2015 and month=09 then we have to get 2015-09-29 if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
l want to run my procedure every month,but it must look at the 1st and the last day of the month.So that when l use my where clause l'll say where 1st and last day between @startdate and @enddate. How do l do that?
collections_hexagon '2002-05-12','2002-05-12'
Alter Procedure Collections_Hexagon ( @Startdate datetime, @Enddate datetime
set @Startdate = 1stdayof currentMonth set @Startdate = lastdayof currentMonth )
In SQL 2000, the following message is logged to the NT event log every time the sp_configure 'show advanced options' command is executed. This did NOT occurr in SQL 7.
"Error: 15457, Severity: 0, State: 1 Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install."
Does anyone know if I can turn OFF the event logging of this message. It is confusing to the end users of our product that uses SQL 2000 as a back-end. Some of our product's code issues the sp_configure command that causes this message. It shows up as an informational message, but then the first word in the text is "Error:". I think I'll be getting a lot of support calls about this if I can't figure out a way to make it stop writting this to the event log :(
Any insight or suggestions would be most appreciated.
I have a problem with a date in my sql view, I need the records from the 3 last months but without the current month, if I execute my view right now I have the records from January to april but I just need from January to march, I must have always the 3 previous month but I don't know how I can do it
Hi I want to show only the month names in user selection criteria. If we create a report parameter of type datetime it will let user to select day too. I want only month and year to be selelected from dateteim control...
I m creating P&L(profit and Loss ) Reports of accounts its consists of 2 levels
in level2:
my procedure display the output of (Actuals in lakhs)
RESPONSIBILITY DEPT CATEGORY CURRENT YTD ACTUALS SALES Sales Net Sales 444.65 Sales Sales LESS TRD 22.55 SALES NET RETURNS NET RETURNS 422.10 (net sales - TRD) Finance LESS ED LESS ED 40 Sales Totals Sales 382.10(RETURNS - ED)
(only calculation for above dept only remaining dept values display sum of relvenat accounts ,and if i click the category relvent account codes shown here)
Materials .... ... .. production ..... ............ ........
i made a procedure for above
create procedure Pl_level2
@fmdate datetime, @todate datetime, @category varchar(200) as begin create table #temp1
[code]....
like i m inserted so many accounts in temp tables .
IF (@category IS NULL or @catagory=' ' ) begin select responsibility, dept, category, round(Max(Actuals)/100000,1,2) as Actuals from #temp
[code]....
here i can display only current YTD only how to display previous year (13-14) YTD in level1
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
Can we show the data of a report for previous month? The report is supposed to run montly basis. But once it is run, it shows the data only for the previous month.
we can show it if its only for previous day. In this case it is like this;
cdtable.SubmittedDate = GETDATE () - 1
But I dont find function like GETMONTH() or smthing.
I have a table thats updated daily with monthly data totals:
Month, Total orders1, Total orders2, etc 12/01/2012, 5, 8, etc 11/01/2012, 6, 5, etc
How do I pull data from this table in SQL Server for ONLY the current month? I was thinking using the getdate() function to get the current month, but it doesn't match exactly so I get no results
user data saved in db select distinct UserID,Name from Userss Where IsActive=1 and order by UserID and i want to just calculate no of days in month based on year and month name supplied by user. one way i can do it. first i will create a temporary table and in loop add many columns to that table and later dump user data to specific column.
I have a SSRS report using 2008 R2. It prompts the user for the start and end dates. This all works. But now I want the start date parm to default to the first day of the current month and the end date parm to default to the last day of the current month.In the new query window in SQL Server Management Studio, I can run this chunk of code to get the first day of current month:
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
I have 12 month report and I need show volume and difference between current and prev month volume, what is the smart way to do this, do I need to put prev month value onto same row horizontally? I think should be some other smart way, I heard about LEAD function?
This what I think for now, It should be listed per ClientID also, in my example I have single ClientID for simplicity.
I tried to do LEAD but with not success..
/* IF OBJECT_ID('tempdb..#t') is not null drop table #T; WITH R(N) AS (SELECT 1 UNION ALL SELECT N+1 FROM R WHERE N <= 12 ) SELECT N as Rn, 10001 ClientID, DATENAME(MONTH,DATEADD(MONTH,-N,GETDATE())) AS [Month],
