Query Working Fine On 2000 But Not On 2005
Apr 25, 2008
Hello to all,
if have a problem with a SELECT query that works very fine on SQL Server 2000 but not on 2005. I've transfered my db by creating a full backup and restoring the db on 2005. The db is working except this problem.
When i start executing it doesn't finish. I waited a couple of minutes. On 2000 it only takes about 6 seconds to run.
Here it is:
Code Snippet
SELECT * FROM PPS_TERMbesttmpwhere PPS_TermBestTmp.BestNr + CONVERT(varchar(30),CAST(REPLACE(PPS_TermBestTmp.Pos1, ',', '.') AS float),2)
NOT IN (SELECT PPS_TermBest.BestNr + CONVERT(varchar(30), PPS_TermBest.Pos1,2) FROM PPS_TermBest)
Any ideas?
Thanx
Alex
View 7 Replies
ADVERTISEMENT
Mar 28, 2008
I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.
I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.
/* Update WeekEnding Date for current weeks WeeklySales Records */
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null
Weekly sales has approx 100,000,000 rows
Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.
I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.
One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.
Stacy
View 5 Replies
View Related
Jul 19, 2007
I am attempting to move some SQL 2000 databases to SQL 2005. My main production database does not seem to want to move. When I use the SQL 2005 GUI the .bak backup file is marked 'Incomplete'. When I attempt to restore the backup file I get a 'RESTORE detected an error on page (0:0) in database' message. I saw a thread in the SQL Express forum suggesting trying to restore from the T-SQL level to get the GUI out of the picture and I get the same 'error on page (0:0)' message. However when I take the same file and use SQL 2000 Enterprise Manager it restores with no problems.
Any ideas?
Thanks
Mike Mattix
View 8 Replies
View Related
Nov 14, 2007
Hi,
I have a query which used to run fine on a rubbish SQL 2000 box in about a minute, but with SQL 2005 (SP2) it never finishes, even when left overnight. No errors in the logs or anything. It is the same database which was backed up from SQL 2000 and restored into 2005. Does anybody have any ideas?
Cheers
Steve
SELECT DISTINCT R1.RowVersionId, R2.EnumID AS A, R2.EnumID AS B, R4.EnumID AS C, R6.EnumID AS D, R8.EnumID AS E, R10.EnumID AS F, R12.EnumID AS G, R14.EnumID AS H
FROM
RowRuns AS R1
INNER JOIN XRunConfigEnum AS R2 ON R1.RunVersionID = R2.RunVersionId
INNER JOIN RowRuns AS R3 ON R1.RowVersionId=R3.RowVersionId
INNER JOIN XRunConfigEnum AS R4 ON R3.RunVersionID = R4.RunVersionId
INNER JOIN RowRuns AS R5 ON R1.RowVersionId=R5.RowVersionId
INNER JOIN XRunConfigEnum AS R6 ON R5.RunVersionID = R6.RunVersionId
INNER JOIN RowRuns AS R7 ON R1.RowVersionId=R7.RowVersionId
INNER JOIN XRunConfigEnum AS R8 ON R7.RunVersionID = R8.RunVersionId
INNER JOIN RowRuns AS R9 ON R1.RowVersionId=R9.RowVersionId
INNER JOIN XRunConfigEnum AS R10 ON R9.RunVersionID = R10.RunVersionId
INNER JOIN RowRuns AS R11 ON R1.RowVersionId=R11.RowVersionId
INNER JOIN XRunConfigEnum AS R12 ON R11.RunVersionID = R12.RunVersionId
INNER JOIN RowRuns AS R13 ON R1.RowVersionId=R13.RowVersionId
INNER JOIN XRunConfigEnum AS R14 ON R13.RunVersionID = R14.RunVersionId
WHERE
((R2.ParamID='ee72510e-3bab-49f6-1ff9-4d09cbe8670a' AND (R2.EnumID = '1a2868fb-72ef-e1d3-e79d-fbb5814ab481')))
AND
((R4.ParamID='7aadb3a4-3d13-8e0d-bfa4-4243ed1fdb35' AND (R4.EnumID = '745fb00c-0b16-7b4e-bf8f-da0f46777ca0')))
AND
((R6.ParamID='8c9aee3a-df1f-6ec5-131a-8fa0309ce1ff' AND (R6.EnumID = 'c7af1456-56bc-ba9c-f1e4-95cfd5542d10')))
AND
((R8.ParamID='61a714fa-8b20-1e7e-1adb-c680f72ddf0d'))
AND
((R10.ParamID='d9f0645c-e1be-b5c2-906f-ff3c5b9de0df'))
AND
((R12.ParamID='1916773f-1bf9-eea5-e702-5f293b3047a2'))
AND
((R14.ParamID='c37d4377-f6dd-69bc-16ef-bd06c76f400e'))
View 14 Replies
View Related
Oct 10, 2007
Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):
Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.
Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.
BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).
(5 row(s) affected)
Msg 213, Level 16, State 7, Line 1
Insert Error: Column name or number of supplied values does not match table definition.
Msg 3013, Level 16, State 1, Line 1
RESTORE FILELIST is terminating abnormally.
The code I am using is:
-- the original database (use 'SET @DB = NULL' to disable backup)
DECLARE @DB varchar(200)
SET @DB = 'Marketing'
-- the backup filename
DECLARE @BackupFile varchar(2000)
SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'
-- the new database name
DECLARE @TestDB2 varchar(200)
SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'
-- the new database files without .mdf/.ldf
DECLARE @RestoreFile varchar(2000)
SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2
DECLARE @RestoreLog varchar (2000)
SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2
-- ****************************************************************
-- no change below this line
-- ****************************************************************
DECLARE @query varchar(2000)
DECLARE @DataFile varchar(2000)
SET @DataFile = @RestoreFile + '.mdf'
DECLARE @LogFile varchar(2000)
SET @LogFile = @RestoreLog + '.ldf'
IF @DB IS NOT NULL
BEGIN
SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')
EXEC (@query)
END
-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'
-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'
-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'
-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'
IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)
BEGIN
SET @query = 'DROP DATABASE ' + @TestDB2
EXEC (@query)
END
RESTORE HEADERONLY FROM DISK = @BackupFile
DECLARE @File int
SET @File = @@ROWCOUNT
DECLARE @Data varchar(500)
DECLARE @Log varchar(500)
SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')
CREATE TABLE #restoretemp
(
LogicalName varchar(500),
PhysicalName varchar(500),
type varchar(10),
FilegroupName varchar(200),
size int,
maxsize bigint
)
INSERT #restoretemp EXEC (@query)
SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'
SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'
PRINT @Data
PRINT @Log
TRUNCATE TABLE #restoretemp
DROP TABLE #restoretemp
IF @File > 0
BEGIN
SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +
' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +
QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)
EXEC (@query)
END
View 1 Replies
View Related
Mar 3, 2006
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
View 5 Replies
View Related
Mar 27, 2008
Hi,
I am having 'INSERT STATEMENT CONFLICTED' error since I try to configure sql server 2005 Full Text Search for my database. Before everything was going fine but after doing some changings I mess up my all DB's. None of my database is working. The error only occur while inserting the records using web form. But I can insert directly from Management Studio interface. here is part of my error:
ERROR:
System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dept_LegalLaw_Dept_LegalMinistries1". The conflict occurred in database "LegalDB", table "dbo.Dept_LegalMinistries", column 'RegID'.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
...............AND SO ON
INSERT QUERY:
INSERT INTO Dept_LegalLaw (
Agreement,Amendment,Attachment,Html,ID,IssueNo,LawDate,LawID,LawNo,Mistakes,Name,NameSearch,Pages,RegID,Scanned,SerialNo,Path) VALUES (
'1',NULL,NULL,'1','C0667','2666','5/26/2004 12:00:00 AM','2','22',NULL,N'تعميم بشأن عطلة ذكرى المولد النبوي الشريÙ?',N'مرسوم اميري رقم 29 لسنة 2001 بانشاء لجنة الاسكان والاعمار','1','RAC,',NULL,'5556','RCAB4505.htm')
--RETURN THE NEW IDENTITY VALUE
SELECT SCOPE_IDENTITY() MediaID
I really need urgent help. that how i can reverse this thing back.
Thanks
View 1 Replies
View Related
Mar 15, 2006
I have a 64bit Ent Ed, Created a SSIS package, deployed it, its running when running from sql server but not running as a job
View 1 Replies
View Related
Oct 5, 2015
I have been trying to get the ValueR column of the following query through the MDX but instead getting ValueW as output of the MDX
  selectÂ
  exp(Log(sum(MTMROR)+ 1 ))-1 as ValueW,
  exp(sum(Log(MTMROR + 1)))-1 as ValueR
  fromÂ
  Temp_Performance
  where Rundate in ('2015-03-01','2015-03-02')
MDX written for the above query is
  WithÂ
  Member [Measures].[LogValuePre]
  as ([Measures].[MTMROR] + 1)
  Member [Measures].[LogValuePre1]
  as VBA
[Code] ...
[MTMROR] measure has the aggregate function Sum. What i can get from this behavior is MDX is first aggregating the result and default aggregation function is Sum. When i try to see the value with more granular data by having the date dimensions on the row (un-commenting the date dimension) i get the correct log and exp log values. Its showing the correct value as date dimension is most granular level in the fact table. While trying to get the data at less granular level(Fund level), getting the sum function applied automatically. Â Â
If i set AggregateFunction to none in the cube structure, i get null as the output.
How could i apply the log function before the sum function in the [MTMROR] measure?
View 4 Replies
View Related
May 19, 2008
Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring <SelectParameters> <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" /> </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000? (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael
View 2 Replies
View Related
Jun 18, 2008
Hi,
I'm just moving over one of our databases from SQL2000 to 2005. Everything is working fine, and all web sites are working, however I just can't seem to get xp_cmdshell to function on the 2005 server.
I have enabled xp_cmdshell, and when I run a stored procedure, which writes the contents of one column to a text file, it says "invalid object name". This table is definitely there, and is actually updated earlier on in the same SP, so permissions for that are fine.
This is the line causing the problem (if I take it out, the rest of the SP works no problems):
--write the text file
EXEC master.sys.xp_cmdshell 'bcp "SELECT newslettertext FROM mydatabase.dbo.newsletters" queryout D:ewslettertext extbody.txt -U -P -c'
Error = [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'mydatabase.dbo.newsletters'.
SQLState = 37000, NativeError = 8180
Error = [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared.
NULL
Could it be to do with permissions on the master.sys.xp_cmdshell? If so, wouldn't it give me a "permission denied" error?
Any help would be greatly appreciated!
Thanks
View 6 Replies
View Related
Aug 27, 2007
Hi! I have installed SQL 2000 and SQL 2005 in my computer.I tried to use some new features like row_number(),try..catch.. but are not working giving syntax error.� So someone told me that i had to check the version and when I cheked I realized I was working with SQL 2000: “Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Aug 6 2000 00:57:48 Copyright (c) 1988-2000 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)� So, how can I change it for working with SQL 2005?. It’s like I’m working with SQL 2005 interface but internally it works as SQL 2000. Can you help me please?
View 2 Replies
View Related
Aug 1, 2006
hello friends,
i am facing a problem in SQL Server 2005 Express Edition. The database created in the SQL Server 2005 Express is when opened in SQL Server 2000, it changes the data type of all the columns of all the table to text type. can anybody help me?
View 4 Replies
View Related
Aug 27, 2007
Hi!
I have installed SQL 2000 and SQL 2005 in my computer. But none of 2005 feature is working. So someone told me that i had to check the version and when I cheked I realized I was working with SQL 2000:
€œMicrosoft SQL Server 2000 - 8.00.194 (Intel X86)
Aug 6 2000 00:57:48
Copyright (c) 1988-2000 Microsoft Corporation
Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)€?
So, how can I change it for working with SQL 2005?. It€™s like I€™m working with SQL 2005 interface but internally it works as SQL 2000. Can you help me please?
View 1 Replies
View Related
Dec 19, 2003
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
View 1 Replies
View Related
May 4, 2006
I know my problem is not directly associated w/ SSIS, so please forgive the post here. I figured this would be the "most" appropriate place to post this challenge.
We're attempting to edit a 2000 DTS package in Design mode from within the 2005 SQL Management Studio. To do this we downloaded/installed the following packages from the MS download site:
Microsoft SQL Server 2000 DTS Designer Components
Microsoft SQL Server 2005 Backward Compatibility Components
We're able to open the package in design mode from the Management Studio (Server > Management > Legacy > Data Transformation Services > DTS Package Name). But, when the DTS designer is open, the backspace and arrow keys won't respond in the Management Studio. They begin responding when we close the DTS designer. There are no error messages when we close the DTS designer.
Does anyone know of a fix or a workaround? Any help would be greatly appreciated.
Thanks, Mike
View 7 Replies
View Related
Apr 24, 2008
Hi,
I have a query as mentioned below:
SELECT BillCurrencyID,DistD,Amount,PartnerFlag1
FROM Factsales_tab_Dtls (NOLOCK)
WHERE (sales_year =2007 OR sales_year=2008)
AND Country ='US'
1) Table Factsales_tab_Dtls is having more than 5.5 million of records.
2) It is having 32 columns.
3)There's nonclusetered index on columns sales_year & country
4)The query takes longer time for execution
Please help me fine-tune the query
View 1 Replies
View Related
Jul 20, 2005
Hi, I have problem running this query. It will time out for me...My database are small just about 200 members.I have a site for swaping appartments (rental). my query should lookfor matchin a triangle. Like this member A -> B->CA give his appartment to B. B gives his appartment to C and finallyC gives his appartment to ASoo my query looks for matching parameters like rooms, location, sizeandsoo on..I have one table for existing appartments and one for "whantedappartments"and 1 table called "intresse" where members can store "yes" or "no" ifthey are interessted in a appartment.I also have a table called "omrade" to store locations of interest.Hope you can helpe me with some tip soo i can run this query in a fewseconds instead of 20-30 secThanks MSELECTF.medlemsNr as medlemsNr, F.lfId AS lfId, F.ort AS ort, F.gatuadressAS gatuadress, F.gatuNr AS gatuNr, F.rum AS rum,F.storlek ASstorlek,F.hyra AS hyra, count(F.medlemsNr) As hitsFROMmedlem08 A, medlem08 B, medlem08 C, lagenhetF08 D,lagenhetO08 E, lagenhetF08 F, lagenhetO08 G, lagenhetF08 H,lagenhetO08 IWHERED.rum >= I.rumMin AND D.rum <= I.rumMax ANDD.storlek >= I.storlekMin AND D.storlek <= I.storlekMax ANDI.hyraMax = 0" & " OR D.hyra <= I.hyraMax) ANDI.balkong = '" & "" & "' OR D.balkong = I.balkong) AND(I.badkar = '" & "" & "' OR D.badkar = I.badkar) AND(I.bredband = '" & "" & "' OR D.bredband = I.bredband) AND(I.hiss = '" & "" & "' OR D.hiss = I.hiss) AND(I.spis = '" & "" & "' OR D.spis = I.spis) AND(I.brf = '" & "" & "' OR D.brf = I.brf) ANDD.postNr IN (select postNr from ONSKEMAL08 where loId=I.loId) ANDF.medlemsNr Not IN (select medlemsNr2 from INTRESSE08 wheremedlemsNr1=A.medlemsNr) ANDH.rum >= G.rumMin AND H.rum <= G.rumMax ANDH.storlek >= G.storlekMin AND H.storlek <= G.storlekMax AND(G.hyraMax = 0" & " OR H.hyra <= G.hyraMax) AND(G.balkong = '" & "" & "' OR H.balkong = G.balkong) AND(G.badkar = '" & "" & "' OR H.badkar = G.badkar) AND(G.bredband = '" & "" & "' OR H.bredband = G.bredband) AND(G.spis = '" & "" & "' OR H.spis = G.spis) AND(G.brf = '" & "" & "' OR H.brf = G.brf) ANDH.postNr IN (select postNr from ONSKEMAL08 where loId=G.loId) ANDF.rum >= E.rumMin AND F.rum <= E.rumMax ANDF.storlek >= E.storlekMin AND F.storlek <= E.storlekMax AND(E.hyraMax = 0" & " OR F.hyra <= E.hyraMax) AND(E.balkong = '" & "" & "' OR F.balkong = E.balkong) AND(E.badkar = '" & "" & "' OR F.badkar = E.badkar) AND(E.bredband = '" & "" & "' OR F.bredband = E.bredband) AND(E.hiss = '" & "" & "' OR F.hiss = E.hiss) AND(E.spis = '" & "" & "' OR F.spis = E.spis) AND(E.brf = '" & "" & "' OR F.brf = E.brf) ANDF.postNr IN (select postNr from ONSKEMAL08 where loId=E.loId) ANDA.medlemsNr=D.medlemsNr AND A.medlemsNr=E.medlemsNr ANDB.medlemsNr<>A.medlemsNr AND C.medlemsNr<>A.medlemsNr ANDB.medlemsNr<>C.medlemsNr ANDB.sparr<>1 AND C.sparr<>1 ANDA.typ=11 AND A.medlemsNr=" & session("medlemsNr") & " ANDB.medlemsNr=F.medlemsNr AND B.medlemsNr=G.medlemsNr ANDB.typ=11 AND A.triangel=1 AND B.triangel=1 AND C.triangel=1 AND " &_C.medlemsNr=H.medlemsNr AND C.medlemsNr=I.medlemsNr ANDC.typ=11 group by F.lfId, F.medlemsNr,F.ort,F.gatuadress,F.gatuNr,F.rum,F.storlek,F.hyra
View 9 Replies
View Related
Oct 17, 2006
This one has me stumped.
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
View 2 Replies
View Related
Nov 15, 2007
I converted an Access db to SQL Server 2005 Express using FullConvert Enterprise and the conversion went well. I ran a few queries. When I logged in today and run the same exact query (saved it) I get this error:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'tblTXMup'.
I googled the error and someone in another forum said to check ownership, that it would throw that error if another user who was not dbo tried to run a query. I checked and the owner is sa. I logged in as sa and get the same error.
Anyone have an idea what happened?
View 5 Replies
View Related
Nov 20, 2006
Hi all,I just asked some people to help me out and phone microsoft with thefollowing information, kindly they refused unless we setup a supportcontract with them first, for pre-sales information. (That really doesnot sound like good business sense to me - anyway here is our problem,if anyone could help thanks)."To tell and ask microsoft:We will be setting up a microsoft sql server 2000 instance running on awindows 2003 server.1) We need to check this can run alongside a microsoft 2003 sql server(either workgroup or standard edition), on the same machine. Are thereany .dll clashes if we do this? If there are can we run SQL Server2000, in a virtual machine running windows 2000 professional. (I have alicenced copy we can use for this).2) If we run one instance of 2000, and one of 2003 of the sql servers,can one use the processor licence model, and one use the CAL licencemodel."Thanks for any help, and any idea why they actually force you to usenews groups for pre-sales information?David
View 4 Replies
View Related
Mar 31, 2004
hi all
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin
declare @current_date datetime
set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from
(
(
select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min"
from topcat.class_contact
where status ='callback'
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) <> 0)
order by callback_date asc
--order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc
)
union
(
select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'callback'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) = 0)
order by callback_date asc
)
union
(
select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'No Connect'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
order by callback_date asc
)
union
(
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
)
) contact_queue
order by priority desc, recency desc, callback_date asc, frequency desc
end
View 1 Replies
View Related
Jul 21, 2015
I am able to select the average, max, etc of the variable in a simple select statement but when I do the following, it doesn't work. The reason I am doing the following is because I am calculating the average and such over a 5 min interval, then saving the output as one line. That is why I condense average, max, min, and stdev into one variable which I then output. why it won't run when I have it like this but will run when it is like this?
will run:
SELECT AVG(NacTemp), MAX(NacTemp),MIN(NacTemp), STDEV(NacTemp)
FROM [DATABASE]
WHERE [UTCDeviceTimeStamp] between DATEADD(minute, -5, GETUTCDATE()) and GETUTCDATE()
won't run but I need it to:
DECLARE @now datetime SET @now = GETUTCDATE() --Universal Time
DECLARE @timeint int SET @timeint = '5' --time interval in minutes
DECLARE @time datetimeSET @time = (SELECT MIN([UTCDeviceTimeStamp]) FROM [DATABASE] WHERE [UTCDeviceTimeStamp] BETWEEN DATEADD(minute, -@timeint,@now) AND @now) -- Timestamp data will be saved as
DECLARE @comma varchar(4) SET @comma = ', '
[Code] ....
View 9 Replies
View Related
Mar 28, 2008
I have created a lot of reports using this technique, but this is the first one that doesn't work. As there is absolutely nothing special about it, I can't figure out what the issue is.
I have one dataset that uses parameters chosen from two other dataset results. One dataset result runs just fine and returns values in reporting services, but the other returns blank in reporting services. In Visual Studio, both datasets return data.
I cannot for the life of me figure out what I've done that gives this result as I've never encountered it before and use this method of parametization quite frequently.
The dataset in question doesn't even join any tables, it's a direct select distinct field"1" from table"a".
I'm running SQL2005, SP2.
Thanks for any advice.
Margaret
View 6 Replies
View Related
May 11, 2007
We are running MS RS and SQL Server 2000 SP3.
We have one LEDGER, where all the daily activities are stored. The LEDGER table has 4 indexes (1 clustered and 3 non-clustered). To get AR we use this table.
Well problem is some times in 1-2 months, any simple AR query takes a long time and every other client gets slow response (queries are very slow or sometimes block).
If we DROP any index on LEDGER table and again put it back (RECREATE), all our queries work fine and faster. This goes on till 1-2 months, till we see the same issue again.
This is a classic case happened today. Queries were running fine till morning 8 AM. We upload some 50 thousand records to Ledger table (Data Conversion). Well after 30 mins, all simple AR queries started taking a long time. We DROPPED an index in LEDGER table and everything was faster....Just to be same we added back the same index again.......everything is Faster.....
What is this. ....is it our QUERY, index or huge Transactions or no free space ???
We are scheduled to run SP4, next week. But is there any solution in the mean time on what is this?
Also is they any way to KILL all SQL server processes that take more than a mins. We just don't want ALL our client to Slow down because of one query????
Thanks,
View 3 Replies
View Related
Oct 27, 2006
Hey. I've a windows vista machine which can't connect to SQL 2005 box. Other machines which are lower than vista work fine. Also, vista box can connect to other SQL 2005 instances but can't connect to only one instance. But, I can connect to the instance fine from my XP box. Also, it's not a permissions issue. This user is an SA and can connect form some other machine. SQL 2005 box is at 2047 version right now. And, the user is able to connect to some other boxes which are also at 2047. Please help. Thank you
View 1 Replies
View Related
Apr 3, 2007
I have views that cast the data into data types.
On 2005 when retrieving the views using a where clause i get errors. I have put together an example below that illustrates the error.
CREATE TABLE TestData ( Id VARCHAR(10), [Description] VARCHAR(20), [Type] INT)
CREATE TABLE TestTypeLookup( [Type] INT, [Description] VARCHAR(20))
GO
INSERT INTO TestTypeLookup VALUES (1, 'Type 1')
INSERT INTO TestTypeLookup VALUES (2, 'Type 2')
INSERT INTO TestData VALUES ('AA', 'Description for AA', 1)
INSERT INTO TestData VALUES ('10', 'Description for 10', 2)
INSERT INTO TestData VALUES ('20', 'Description for 20', 2)
GO
CREATE VIEW TestView AS
SELECT TOP 100 PERCENT CAST(Id AS INT) Id, [Description]
FROM TestData
WHERE [Type] = (SELECT TOP 1 [Type] FROM TestTypeLookup WHERE [Description] = 'Type 2')
ORDER BY CAST(Id AS INT)
GO
SELECT * FROM TestView WHERE Id = 10
GO
DROP VIEW TestView
DROP TABLE TestData
DROP TABLE TestTypeLookup
GO
View 11 Replies
View Related
Feb 1, 2008
Hi,
We are into a phase of retiring SQL 2000 database and replacing with SQL 2005. Could you please guide me to get a list of all the MUST DO changes on syntax, statements/query those have been changed in 2005 when compared to 2000.
I know there is a list of new features list on site, but it doesn't tells me precisely what all syntaxes will result differently then expected in 2000. For Example - if we open help for SET ANSI_NULLS ON, we can read that MS is suggesting to avoid its use as it will be absolete in later version. So do we have a list of all such things in one place that we can read and analyse our code for changes to be done now instead of finding it later.
Thanks for your time on this one, in advance.
Regards
Pankaj
View 3 Replies
View Related
Dec 21, 2005
Hi,
We are currently trying to get to grips with SQL Server 2005, and have a basic question. Is it possible to user Query Analyser from SQL 2000 with 2005? All our support staff use Query Analyser on a day to ay basis and all our clients are currently on SQL Server 2000. It would be usefull if when new customers come on line with 2005 our staff can use one tool to perform their tasks
We've tried to run Query Anayser and it's comming up with a connection error, this may be down to us not setting some access up or not connecting correctly.
Thanks in advance
Chris
View 3 Replies
View Related
Mar 15, 2006
The following query works in SQL Server 2000 but gives follwoing error in SQL Server 2005
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to float.
=======================
SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL
AND VWCONTACT.EMAIL LIKE '%@%'
AND NOT EXISTS (SELECT VWCONTACT.ID
FROM (SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) >= 77002) TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) <= 77099) TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1
WHERE VWCONTACT.ID = NESTEDQUERY1.ID)
AND NOT EXISTS (SELECT VWCONTACT.ID
FROM (SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77336)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77338)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77345)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77365)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77396)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77489)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77504)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77598)) ATTR
ON ATTR.CONTACTID = VWCONTACT.ID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1
WHERE VWCONTACT.ID = NESTEDQUERY1.ID)
AND NOT EXISTS (SELECT VWCONTACT.ID
FROM (SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 23102
AND ATTRIBUTEVALUE = 'Houston') TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22944
AND ATTRIBUTEVALUE = 'TX') TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1
WHERE VWCONTACT.ID = NESTEDQUERY1.ID)
when I modify the query like the following in SQL Server 2005 it works. Now the problem is since it is adynamically generated query from our application based on users selection of criteria, it means a lot to us to change the code.
PLEASE HELP....
=====================================================
SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL
AND VWCONTACT.EMAIL LIKE '%@%'
EXCEPT
((SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) >= 77002) TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) <= 77099) TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL )
UNION
(SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77336)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77338)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77345)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77365)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77396)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77489)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77504)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77598)) ATTR
ON ATTR.CONTACTID = VWCONTACT.ID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL )
UNION
(SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 23102
AND ATTRIBUTEVALUE = 'Houston') TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22944
AND ATTRIBUTEVALUE = 'TX') TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ))
View 3 Replies
View Related
Jul 18, 2007
Hi there,
We are in the process of upgrading from SQL Server 2000 to 2005. During testing we came across the following situation.
To reproduce the issue you can do the following
Create this structure in a 2000 and 2005 server instances
CREATE TABLE test
(a int,
b varchar(30))
INSERT INTO test
(a, b)
VALUES (1, '2')
INSERT INTO test
(a, b)
VALUES (3, '3a')
INSERT INTO test
(a, b)
VALUES (4, '4')
Then run the following statement in both servers:
UPDATE test
SET a = ltrim(rtrim(b))
WHERE b NOT LIKE '%a%'
AND ltrim(rtrim(b)) <> a
In 2000 this last statement will execute with no problem and it will update one row, whereas in 2005 the following error message is given:
Msg 245, Level 16, State 1, Line 20
Conversion failed when converting the varchar value '3a' to data type int.
By looking at the execution plan it seems that 2005 first tries to evaluate ltrim(rtrim(b)) <> a and then excludes those rows containing a whereas 2000 first excludes those rows containing a and then evaluates the different than condition.
I know fixing this instance itself is easy but I€™m more concerned about having to rewrite many more stored procedures where we find this same scenario; is there any setting that can be changed to avoid this?
Any guidance is much appreciated.
Thanks!
View 1 Replies
View Related
Jan 24, 2006
I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.
When i tried the sample on a newly created database it worked fine.
Is there any solution to make the restored database to work for service broker.
Thanks
Prashanth
View 3 Replies
View Related
