Querying DateTime Field

Aug 5, 2007

Hi all,

1. I need to query a DateTime field, I'm using the following which works but I was just wondering if there is a faster or better way to query a DateTime field, omitting the Time part:

CAST(FLOOR(CAST(dbo.tblContactLog.DateCreated AS FLOAT)) AS DateTime) <=' + '''' + @EndDate + ''''

2. Also, I'm using the getdate() function to insert the date the record was entered, this always puts in the Date and the Time, is there a way to just put in the Date part?

Thanks

View 1 Replies


ADVERTISEMENT

Problem Querying On DateTime Field

Mar 29, 2008

Hello all,
 I am having an issue querying DateTime. The field I am querying on holds a full datetime stamp, such as "29/03/2008 13:30:00". I need to query the Date only, and return the results that match the specified date regardless of the time stamp.
So my query would look like this:-
SELECT * FROM table WHERE Date = '29/03/2008'
At the minute my code returns nothing. Is there way way to query the Date only ??
 
Thanks,Sean
 
 

View 5 Replies View Related

Querying DateTime Field And Summarize Just Using Date

May 9, 2012

I have 2 tables that I would like to summarize a couple of columns for a full day of production(12:00:00 AM to 11:59:59 PM) based on passed variables. Here are my Tables:

Order_Details_tbl
PlantID – IngredientID – AmountBatched – DateTime
1 – 8 – 1000 – 4/30/2012 1:23:12 PM
1 – 8 – 1000 – 4/30/2012 4:23:12 PM
1 – 8 – 1000 – 5/1/2012 1:23:12 PM
1 – 8 – 1000 – 5/1/2012 10:23:12 PM
1 – 8 – 4500 – 5/3/2012 1:23:12 PM
1 – 8 – 11000 – 5/7/2012 1:23:12 PM
1 – 8 – 1000 – 5/7/2012 10:23:12 AM
1 – 8 – 1000 – 5/7/2012 1:23:12 PM
1 – 8 – 1000 – 5/7/2012 1:23:12 PM
1 – 8 – 1000 – 5/8/2012 9:23:12 AM
1 – 8 – 1000 – 5/8/2012 4:23:12 PM
1 – 8 – 1000 – 5/8/2012 2:23:12 PM

Order_Details_Details_tbl
PlantID – IngredientID – AmountBatched – DateTime
1 – 8 – 100 – 4/30/2012 1:23:12 PM
1 – 8 – 11000 – 5/4/2012 11:23:12 PM
1 – 8 – 11000 – 5/7/2012 11:23:12 PM
1 – 8 – 1000 – 5/8/2012 11:23:12 AM
1 – 8 – 1000 – 5/8/2012 1:23:12 AM
1 – 8 – 1000 – 5/8/2012 11:23:12 PM
1 – 8 – 1000 – 5/8/2012 5:23:12 PM
1 – 8 – 1000 – 5/8/2012 2:23:12 PM

I will pass in the @PlantID int, @IngredientID int, and @Days int. I want to sum the AmountBatched from both tables and display the total for each given day. The @Days will indicate the number of days to query off of previous to the current date. I would also like to eliminate weekends from the results. For example when stored procedure is run passing the following values @PlantID = 1, @IngredientID = 8, and @Days = 14. If date procedure is run is 5/9/2012, would like to summarize for 4/25/2012 to 5/8/2012 excluding weekends if possible.

Results
Date – AmountBatched
4/25/2012 – 0
4/26/2012 – 0
4/27/2012 -- 0
4/30/2012 -- 2100
5/1/2012 -- 2000
5/2/2012 -- 0
5/3/2012 -- 4500
5/4/2012 -- 11000
5/7/2012 -- 25000
5/8/2012 – 8000

Notice 4/28, 4/29, 5/5, and 5/6 are eliminated from the results, which are weekends. Is this possible in a sql stored procedure? I am writing an app in vb .net and am hoping to get the results I need in a single call to sql server and not have to make several calls back. I have not worked with advanced datetime methods in sql server before.

View 6 Replies View Related

Querying Like Datetime

Oct 31, 2007

Hey,
What is the best way to query two datetime values to see if they are alike?  I need to determine if an [AccountEndDate] is today (both values are datetime).  Using "Like" does not work.
Thanks!

View 4 Replies View Related

Querying DateTime

Jul 29, 2007

If I do the following

SELECT *
FROM MyTable
WHERE DateCreated = '27/07/2007'

It fail's, what am I doing wrong?

Thanks

View 7 Replies View Related

Datetime Entry For Querying Analysis Service Cube

Jan 16, 2007

Hi everybody,

I have two problems while using a analysis service cube as data source for a reporting service report.

1.) I've an individual time dimension which has day entries in the standard date format "mm/dd/yyyy". When using an parametric entry for the date hierachy the reporting offers me all entries as a list (some 1000 entries). Looking under report parameters I recognized that the input parameter is listed as of the type string. However I know that the underlying field and as well the hierachy in the cube is of the format datetime. Change it to datetime causes the reporting service to fail with the error message:

An error occured during local report processing.
The property 'ValidValues' of report parameter 'DIM...' doesn't have the expected type.

How can I use the parameter in the format datetime to restrict the time dimension? ...so that I can select the date over the calendar function.

2.) I have another dimension with the hierachy cycle which has the string format "year-month". I would like to use the selection of the date hierachy to create the restriction on the cycle hierachy. I.e. entering '01/16/2007' on the time dimension should write the value '2007-01' to a parameter which is then used to restrict the cycle hierachy. Experimenting with report parameters always caused the error message:

An error occured during local report processing.
An error has occured during report processing.
Query execution failed for data set 'DIM...'.
Query (1,453) The restriction by the CONSTRAINED-flag in the STRTOSET-function has been violated.

As I only allow single value entries I thought about changing the STRTOSET command in the underlying MDX query into STRTOMEMBER. However this didn't solve the problem.

How can I create an input for a restriction on a dimension based on a parameter with a self constructed string?

Thanks,

StSt

View 4 Replies View Related

Querying A Text Field

May 21, 2008



This may be easy (hopefully). I am trying to query a text field and filter out based on the number of characters the user has inputed. For example, I only want results returned where the text field has more than 50 characters inputed. Any help is greatly appreciated.

Thanks in advance.

View 10 Replies View Related

DateTime Unable To Save In Datetime Field Of SQL Database

Mar 14, 2007

 Hi all, having a little problem with saving dates to sql databaseI've got the CreatedOn field in the table set to datetime type, but every time i try and run it i get an error kicked up  Error "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."I've tried researching it but not been able to find something similar.  Heres the code: DateTime createOn = DateTime.Now;string sSQLStatement = "INSERT INTO Index (Name, Description, Creator,CreatedOn) values ('" + name + "','" + description + "','" + userName + "','" + createOn + "')"; Any help would be much appreciated 

View 4 Replies View Related

How To Add Date Field And Time Field (not Datetime Field )

May 4, 2006

Good morning...

I begin with SQL, I would like to add a field that will be date like 21/01/2000.

Actually i find just "datetime" format but give me the format 21/01/2000 01:01:20.

How to do for having date and time in two different field.

Sorry for my english....

Cordially

A newbie

View 3 Replies View Related

How To Convert Datetime Field To A Date Field So Excel Recognize It As Data Type

May 17, 2015

I embedded a SQL query in excel that gets some datetime fields like "TASK_FINISH_DATE" .

How can I convert a datetime field to a date field in SQL in a way that excel will recognize it as a date type and not a text type?

I tried:
CONVERT(varchar(8),TASK_FINISH_DATE ,3)
CONVERT(Date,TASK_FINISH_DATE ,3)
CAST(TASK_FINISH_DATE as date)

**all of the above returned text objectes in excel and not date objects.

View 3 Replies View Related

Informix Date Type Field To SQL Server Datetime Field Error

Oct 17, 2007



I am trying to drag data from Informix to Sql Server. When I kick off the package
using an OLE DB Source and a SQL Server Destination, I get DT_DBDATE to DT_DBTIMESTAMP
errors on two fields from Informix which are date data ....no timestamp part

I tried a couple of things:

Created a view of the Informix table where I cast the date fields as datetime year to fraction(5), which failed.

Altered the view to convert the date fields to char(10) with the hopes that SQL Server would implicitly cast them
as datetime but it failed.

What options do I have that will work?

View 1 Replies View Related

Converting Datetimeoffset Field To Datetime Field / Why Milliseconds Value Is Incorrect

Nov 17, 2012

DECLARE @datetimeoffset datetimeoffset(3)
DECLARE @datetime datetime
SELECT @datetimeoffset = '2012-11-08T17:22:13.575+00:00'
SELECT @datetime = @datetimeoffset
SELECT @datetimeoffset AS '@datetimeoffset ', @datetime AS 'datetime'
__________________________________________________ ___________
Result of above SQL is
@datetimeoffset datetime
2012-11-08 17:22:13.575 +00:002012-11-08 17:22:13.577
__________________________________________________ ____________

The result should be '2012-11-08 17:22:13.575', why the milliseconds value is incorrect

View 2 Replies View Related

Datetime Field

Feb 26, 2004

Hello,

I need to show only the date and not the date and time in a datetime field. How do I do this ? EG only store date not date and time.

I want to do this via enterprise manager

Many thanks

Grant

View 2 Replies View Related

DateTime Field

Feb 26, 2001

OUr end-users will be accessing data through a SQL view through third party applications. Ex. Access, Excel, Crystal Reports. All the date fields need to only have 'Data' XX/XX/XXXX, not datetime. Since SQL Server only stores the data as datetime, I convert the data in the proper format in the Create view statement. The only problem is that the data is now a text (varchar(10) field in which sorting through these third party applications causes issues.
Ex. 01/05/2000 comes before 02/02/1999 because it sorts on the first characters. Is there a way in SQL to store the data as a Date only or any other suggestions.

Thanks for your help.

Daniel

View 2 Replies View Related

Hlp With Datetime Field

Dec 20, 2006

hello there.
i have a databse with a datetime Filed and i want to find all records of the month on the datetie filed.
how can i do it.
i was using this but it does not work

SELECT * FROM laconexion.lc_members WHERE (baja = MONTH(GETDATE()))

thanks a lot

View 4 Replies View Related

Help Inserting Into Datetime Field

Feb 7, 2007

I keep getting the following error message but I don't see what's wrong with my code

Server Error in '/Admin' Application.


Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.Source Error:



Line 147:cmdSql.Parameters.Add("@event_active","1")
Line 148:
Line 149:cmdSql.ExecuteNonQuery()
Line 150:
Line 151:pnlForm.Visible = FalseSource File: c:hostingwebhost4lifememberNYACOAadmincalendar.aspx    Line: 149 Stack Trace:



[SqlException (0x80131904): Arithmetic overflow error converting expression to data type datetime.
The statement has been terminated.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857466
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735078
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +886
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135
ASP.calendar_aspx.SubmitForm(Object s, EventArgs E) in c:hostingwebhost4lifememberNYACOAadmincalendar.aspx:149
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102



Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
  1 <%@ Register TagPrefix="cc1" Namespace="ManyMonkeys.Web.HtmlEditorLibrary.Controls" Assembly="HtmlEditorLibrary" %>
2 <%@ Page Language="VB" masterpagefile="nyacoaadmin.master" debug="true" %>
3 <%@ mastertype virtualpath="nyacoaadmin.master" %>
4 <%@ import Namespace="System" %>
5 <%@ import Namespace="System.Data" %>
6 <%@ import Namespace="System.Data.SqlClient" %>
7 <script runat="server">
8
9 Dim Connection As SqlConnection
10 Dim Sql As String
11 Dim cmdSql As SqlCommand
12 Dim dtr As SqlDataReader
13
14 Sub Page_Load
15
16 Connection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
17 Connection.Open()
18
19 If Not isPostback then
20
21 Sql = "SELECT chapter_id, chapter_name FROM chapter ORDER BY chapter_id"
22 cmdSql = New SqlCommand (Sql, Connection)
23 dtr = cmdSql.ExecuteReader()
24
25 ddlChapter.DataSource = dtr
26 ddlChapter.DataTextField = "chapter_name"
27 ddlChapter.DataValueField = "chapter_name"
28 ddlChapter.DataBind()
29
30 dtr.Close
31
32 ddlChapter.Items.Insert(0, New ListItem(" ", ""))
33
34 Call ShowList()
35
36 End If
37
38 End Sub
39
40 Sub Page_Unload
41
42 'Connection.Close()
43
44 End Sub
45
46 Sub ShowList()
47
48 Sql = "SELECT event_id, event_name, event_date, chapter_name FROM event WHERE event_active = '1' ORDER BY event_id"
49 cmdSql = New SqlCommand(sql, Connection)
50 dtr = cmdSql.ExecuteReader()
51
52 dgrdList.DataSource = dtr
53 dgrdList.DataBind()
54 dtr.Close()
55
56 pnlList.Visible = True
57
58 End Sub
59
60 Sub dgrdList_ItemCommand(s As Object, E As DataGridCommandEventArgs)
61
62 If e.CommandName = "edit" then
63 Call EditForm(dgrdList.DataKeys(e.Item.ItemIndex))
64 Else If e.CommandName = "delete" then
65 Call ConfirmDelete(dgrdList.DataKeys(e.Item.ItemIndex))
66 End If
67
68 End Sub
69
70 Sub ConfirmDelete(idVal As Integer)
71
72 pnlList.Visible = False
73 pnlConfirmDelete.Visible = True
74
75 sql = "SELECT event_name FROM event WHERE event_id = " & idVal
76 cmdSql = New SqlCommand(sql, connection)
77 litDelete.Text = cmdSql.ExecuteScalar()
78
79 ViewState("idVal") = idVal
80
81 End Sub
82
83 Sub DeleteForm (s As Object, E As Eventargs)
84
85 sql = "UPDATE event SET event_active = '0' WHERE event_id = " & ViewState("idVal")
86 cmdSql = New SqlCommand(sql, connection)
87 cmdSql.ExecuteNonQuery()
88
89 pnlList.Visible = True
90 pnlConfirmDelete.Visible = False
91
92 Call ShowList()
93
94 End Sub
95
96 Sub ShowCalendar(s As Object, E As ImageClickEventargs)
97
98 pnlEventDate.Visible = True
99
100 End Sub
101
102 Sub UpdateDate (s As Object, E As Eventargs)
103
104 pnlEventDate.Visible = False
105 txtEventDate.text=eventCalendar.SelectedDate.ToShortDateString()
106
107 End Sub
108
109 Sub SubmitForm (s As Object, E As Eventargs)
110
111 If ViewState("submitType") = "edit" then
112 sql = "UPDATE event SET event_name=@event_name, event_date=@event_date, chapter_name=@chapter_name, event_description=@event_description, event_last_updated_by=@event_last_updated_by, event_active=@event_active WHERE event_id = " & ViewState("idVal")
113 Else
114 sql = "INSERT INTO event (event_name, event_date, chapter_name, event_description, event_added_by, event_last_updated_by, event_active) VALUES (@event_name, @event_date, @chapter_name, @event_description, @event_added_by, @event_last_updated_by, @event_active)"
115 End If
116
117 cmdSql = New SqlCommand(sql, Connection)
118
119 If Len(txtEventName.Text) = 0 then
120 cmdSql.Parameters.Add("@event_name",DbNull.Value)
121 Else
122 cmdSql.Parameters.Add("@event_name",txtEventName.Text)
123 End If
124
125 If Len(txtEventDate.Text) = 0 then
126 cmdSql.Parameters.Add("@event_date",DbNull.Value)
127 Else
128 cmdSql.Parameters.Add("@event_date",txtEventDate.Text & " " & ddlEventHour.SelectedValue & ":" & ddlEventMinute.SelectedValue & " " & ddlEventAMPM.SelectedValue)
129 End If
130
131 If Len(ddlChapter.SelectedValue) = 0 then
132 cmdSql.Parameters.Add("@chapter_name",DbNull.Value)
133 Else
134 cmdSql.Parameters.Add("@chapter_name",ddlChapter.SelectedValue)
135 End If
136
137 If Len(txtEventDescription.Text) = 0 then
138 cmdSql.Parameters.Add("@event_description",DbNull.Value)
139 Else
140 cmdSql.Parameters.Add("@event_description",txtEventDescription.Text)
141 End If
142
143 cmdSql.Parameters.Add("@event_added_by",session("admin_username"))
144
145 cmdSql.Parameters.Add("@event_last_updated_by",session("admin_username"))
146
147 cmdSql.Parameters.Add("@event_active","1")
148
149 cmdSql.ExecuteNonQuery()
150
151 pnlForm.Visible = False
152 pnlList.Visible = True
153
154 Call ShowList()
155
156 End Sub
157
158 Sub AddForm(s As Object, E As Eventargs)
159
160 pnlForm.Visible = True
161 pnlList.Visible = False
162
163 txtEventName.Text = ""
164 txtEventDate.Text = ""
165 ddlChapter.ClearSelection()
166 txtEventDescription.Text = ""
167
168 ViewState("submitType") = "add"
169
170 End Sub
171
172 Sub EditForm (idVal As Integer)
173
174 pnlList.Visible = False
175 pnlForm.Visible = True
176
177 sql = "SELECT * FROM event WHERE event_id = " & idVal
178 cmdSql = New SqlCommand(sql, connection)
179 dtr = cmdSql.ExecuteReader()
180
181 If dtr.Read() then
182
183 txtEventName.Text = dtr("event_name") & ""
184 txtEventDate.Text = dtr("event_date") & ""
185 txtEventDescription.Text = dtr("event_description") & ""
186 ddlChapter.ClearSelection()
187 Try
188 ddlChapter.Items.FindByValue(dtr("chapter_name")).Selected = True
189 Catch Ex As Exception
190 End Try
191
192 End If
193
194 dtr.Close()
195
196 ViewState("submitType") = "edit"
197 ViewState("idVal") = idVal
198
199 End Sub
200
201 Sub DeleteCancel (s As Object, E As Eventargs)
202
203 pnlConfirmDelete.Visible = False
204 pnlList.Visible = True
205
206 End Sub
207
208 </script>
209
210 <asp:Content contentplaceholderid="cplhMainContent" runat="server">
211
212 <asp:Panel runat="server" id="pnlList" Visible="False">
213
214 <asp:DataGrid runat="server" id="dgrdList" AutoGenerateColumns="False" CellPadding="3" CellSpacing="0" width="550" Border="0" DataKeyField="event_id" onItemCommand="dgrdList_ItemCommand">
215 <HeaderStyle BackColor="#CDAD00" Font-Names="Tahoma,Arial,Helvetica,sans-serif" Font-Bold="true" Font-Size="10pt" HorizontalAlign="center" ForeColor="white" />
216 <ItemStyle BackColor="white" Font-Names="Tahoma,Arial,Helvetica,sans-serif" Font-Size="10pt" ForeColor="black" VerticalAlign="top" />
217 <AlternatingItemStyle BackColor="#dcdcdc" Font-Names="Tahoma,Arial,Helvetica,sans-serif" Font-Size="10pt" ForeColor="black" VerticalAlign="top" />
218 <Columns>
219 <asp:ButtonColumn Text="Edit" ButtonType="PushButton" CommandName="edit" />
220 <asp:ButtonColumn Text="Delete" ButtonType="PushButton" CommandName="delete" />
221 <asp:BoundColumn DataField="event_name" HeaderText="Event Name" />
222 <asp:BoundColumn DataField="event_date" HeaderText="Date" />
223 <asp:BoundColumn DataField="chapter_name" HeaderText="Sponsoring Chapter" />
224 </Columns>
225 </asp:DataGrid>
226
227 <asp:Button runat="server" Text="Add New Event" onClick="AddForm"></asp:Button>
228
229 </asp:Panel>
230
231 <asp:Panel runat="server" id="pnlForm" Visible="False">
232
233 Name of Event: <asp:TextBox id="txtEventName" runat="server"></asp:TextBox>
234 <br />Chapter: <asp:DropDownList id="ddlChapter" runat="server" AutoPostBack="False" />
235 <br />Date: <asp:TextBox id="txtEventDate" runat="server" ReadOnly="true" BackColor="Gray"></asp:TextBox> <asp:ImageButton id="CalButton" runat="server" OnClick="ShowCalendar" ImageUrl="images/cal.gif" />
236 <br /><asp:Panel runat="server" id="pnlEventDate" Visible="False">
237 <asp:Calendar id="eventCalendar" runat="server" FirstDayOfWeek="Sunday" Font-Names="Tahoma" Font-Size="8pt" OnSelectionChanged="UpdateDate">
238 <SelectedDayStyle BackColor="#EC9900" Font-Bold="True" />
239 <TodayDayStyle BackColor="#FFC0C0" />
240 <SelectorStyle Font-Names="Tahoma" Font-Size="8pt" />
241 <DayStyle Font-Names="Tahoma" Font-Size="8pt" />
242 <WeekendDayStyle BackColor="#E0E0E0" />
243 <OtherMonthDayStyle ForeColor="Silver" />
244 <DayHeaderStyle BackColor="#334B79" Font-Names="Tahoma" Font-Size="8pt" ForeColor="White" />
245 <TitleStyle BackColor="#CCCCFF" Font-Bold="True" Font-Names="Tahoma" Font-Size="10pt" />
246 </asp:Calendar>
247 <br />
248 </asp:Panel>
249 Time: <asp:DropDownList ID="ddlEventHour" runat="server" >
250 <asp:ListItem Text="12" Value="12" Selected="true"/>
251 <asp:ListItem Text="1" Value="1" />
252 <asp:ListItem Text="2" Value="2" />
253 <asp:ListItem Text="3" Value="3" />
254 <asp:ListItem Text="4" Value="4" />
255 <asp:ListItem Text="5" Value="5" />
256 <asp:ListItem Text="6" Value="6" />
257 <asp:ListItem Text="7" Value="7" />
258 <asp:ListItem Text="8" Value="8" />
259 <asp:ListItem Text="9" Value="9" />
260 <asp:ListItem Text="10" Value="10" />
261 <asp:ListItem Text="11" Value="11" />
262 </asp:DropDownList>
263 :
264 <asp:DropDownList ID="ddlEventMinute" runat="server">
265 <asp:ListItem Text="00" Value="00" Selected="true" />
266 <asp:ListItem Text="15" Value="15" />
267 <asp:ListItem Text="30" Value="30" />
268 <asp:ListItem Text="45" Value="45" />
269 </asp:DropDownList>
270 <asp:DropDownList ID="ddlEventAMPM" runat="server">
271 <asp:ListItem Text="AM" Value="AM" />
272 <asp:ListItem Text="PM" Value="PM" Selected="true" />
273 </asp:DropDownList>
274 <br /><br />
275 Content:
276 <br /><cc1:HtmlEditor id="txtEventDescription" runat="server" Height="300px" Width="575px"></cc1:HtmlEditor>
277 <br /><br />
278 <asp:Button onclick="SubmitForm" runat="server" Text="Submit"></asp:Button>
279
280 </asp:Panel>
281
282 <asp:Panel runat="server" id="pnlConfirmDelete" Visible="False">
283
284 Are you sure you wish to delete <asp:Literal runat="server" id="litDelete"></asp:Literal>?
285 <br /><br />
286 <asp:Button runat="server" Text="Yes - DELETE" onClick="DeleteForm"></asp:Button>&nbsp;<asp:Button runat="server" Text="No - GO BACK" onClick="DeleteCancel"></asp:Button>
287
288 </asp:Panel>
289
290 </asp:Content>
 

View 4 Replies View Related

How To Get Time Value From Datetime Field?

Mar 7, 2008

dear friends..................                   i have a table like below..  name                                    date                                      ------------------------------------------------------------------------------------------------------------ anbumani                   2/18/2008 4:15:56 PM  anbumani                 2/18/2008 4:21:29 PM   anbumani                     2/18/2008 4:23:03 PM   anbumani                  2/18/2008 4:25:25 PM   i want a out put as only time (ex : 4:15:56 PM                                                     4:21:29 PM                                                     4:23:03 PM )   give me the stored procedure code in sql server 2005.. thanks and regards Samuel Chandradoss . J   

View 3 Replies View Related

Get The Time From A DateTime Field

Apr 8, 2008

 
I looked at this post and it didn't work for me.
 
Trying to extract the time portion from a datetime field. ex  7:15:12 AM from    1/1/2008 7:15:12 aM
This is what I tried and neither functions give me the results I want....
 SELECT     DueTime, CONVERT(varchar, DueDate, 108) AS Expr1, SUBSTRING(CAST(DueDate AS varchar), 10, LEN(DueDate)) AS Expr2, CAST(DueDate AS varchar)                       AS Expr3FROM         TODO
Due Time                              Expr1                Expr2                         Expr3
1/1/2008 5:15:00 PM           00:00:00            12:00:00 AM              Jan 1 2008 12:00:00 AM
It seems Cast(DueDate as varchar) is the problem it converts the time to the default 12:00:00 AM
In the above example I want 5:15:00 PM
 
Tx in advance 
 

View 2 Replies View Related

DateTime Field Nightmare!!

Apr 22, 2008

Here is my nightmare!! : I have 3 database tables. ( START, STOP, TICK )START ( Start_ID, Start_Time )STOP ( Stop_ID, Stop_Time )TICK ( Tick_ID, Tick_Time ) I have 3 records in each tables with the time fields being in datetime format. What I want to accomplish: I want to compare Tick_Time to see if it is between Start_Time and Stop_Time. ie. IF Tick_Time > Start_Time AND Tick_Time < Stop_Time  THEN that Tick_Time.colour = Green elseTick_Time.colour = Red Can datetime fields be easily compared like I have shown above? Else can anyone give me an idea of howwwww  Thanks and any help is appreciated 

View 6 Replies View Related

Getting Parts Of DateTime Field

Jun 8, 2008

Hi everyone,
I want to get year, month, day and time parts of a DateTime field in sql,
Can help me?

View 1 Replies View Related

Select Where Datetime Field Is Over 1hr Old

Jun 13, 2008

How would I go about selecting records where a datetime field is >= 1hr? 

View 2 Replies View Related

Date From Datetime Field

Mar 11, 2004

Hi

What is the best practice to get the date from a smalldatetime field without the time.

The table contains 5 minute readings for energy consumption in the column period.

Now i need to get all the readings form some dates.

SELECT dbo.TBL_Data.*
FROM dbo.TBL_Data
WHERE (Period IN (CONVERT(DATETIME, '2003-12-31', 102), CONVERT(DATETIME, '2004-01-01', 102)))


this result contains only the readings for the timestamp 00:00

so how to select the whole day ?

kind regards

piet

View 1 Replies View Related

Getting Just The Date Or From DateTime Field

Sep 2, 2004

Hi,
I have used smalldatetime datatype to store my date and time values. i want to store just the date or time but the problem is it stores both the date and time. For eg, if i add the the date 03/11/2004, it also the stores the current time automatically. so the new value will be something like 03/11/2004 10:00:00 AM where i want just 03/11/2004. further problem is even though i managed to store just the date like 03/11/2004 in the database, whole date and time shows up when i display it in my pages.

any help will be appreciated.

thanx,

View 4 Replies View Related

SQL Substring On DateTime Field

Apr 11, 2006

Hi!
Can anyone tell me how to perform a substring operation on a DateTime field. I'm using SQLServer. I have read that you may have to use casts but I have thus far been unable to get that to work.
My statement:
SELECT EventDate FROM tblEvent WHERE Category = 'GE';
I just want to cut the hours, minutes and seconds off, so that I am left with just the date element.
Thanks all.
Gren

View 1 Replies View Related

SQL DateTime Field Query

May 30, 2006

I was wondering if someone could help me here with some reporting I'm trying to do. For website visits, I currently use getdate() to have SQL insert the date and time of the visit in the table. I was wondering, is there a way to grab just the month from the field? I would like to chart this and I need to group the visits by month. I'm not sure how I would go about filtering just the month out of the entire date and time fields.

View 17 Replies View Related

Formatting A Datetime Field

Jun 13, 2002

I am selecting a datetime value from a table but I want it to be
in this format: mm/dd/yyyy

This query is as close as I have come:

select char(month(nancyDateSent))+ '/'+ datename(day,nancyDateSent) + '/' + datename(yy,nancyDateSent) from tbloutgoingobms_hold

but is not correct - I get dates that look like this: /11/2002

Please help - there must be an easier way !!!

Thanks in advance,
Nancy

View 1 Replies View Related

Datetime Field Conversion

Aug 8, 2000

Hello, I would appreciate any suggestions
I've got a datetime field that I'd like to store as just the date without the time component, but still to keep it defined as a datetime field. I ran this update statement but this conversion isn't working. Conversion to char gives me what I want but I need to keep the field as a date datatype if possible.
Thanks :)

update
<table>
set
<column>=convert(datetime,convert(char(10),hire_date,101)) )

View 3 Replies View Related

Datetime Field Format

Oct 13, 1999

Hi,

I have a table with datetime field in SQL server 7.0
I have inserted values into datetime field
for eg: '10/10/99'
'10/10/99 10:30 AM'
'11/10/99 11:50 PM'
When I view this table from enterprise manager, values are shown exactly
in the same format I have entered.
But, When I run the query from Query Analyzer, It always shows values in the following format '1999-10-10 00:00:00.000'

Is there a way that I can see the values in the same format I have entered.

Help !!!

Thanks

View 1 Replies View Related

Index On Datetime Field

Jan 31, 2003

I've got a table with the following fields and data types

ProjIDint
StatusDatedatetime
ProjStatusvarchar(1)

I want to put a unique index on the fields above, each ProjID can only have one ProjStatus on a given StatusDate (dd/mm/yyyy) , but because of the milliseconds in the date time it's not happening. Any suggestions on how I can get around this.

Thanks in advance.

View 1 Replies View Related

Default Value Of DateTime Field - Now

Jul 6, 2004

Hello,

Can I simply set the default value of a dateTime field with the date and time that the record was created?

View 2 Replies View Related

Datetime Field Overflow

Mar 3, 2006

Using AccessXP as front-end to sql2000 backend. Have .net pages adding/updating/changing fine. But, on Access form when adding a new record, I get:

ODBC call failed. Microsoft ODBC SQL Driver. Fractional truncation (#0) DateTime field overflow (#0)

But, if I'm updating a record that's already been entered and just change
3/15/2006 06:30:00 pm to 3/15/2006 06:45:00 pm
there's no error.

Any Help?

Thanks,
Janet

View 3 Replies View Related

Update Datetime Field??

Apr 6, 2006

hello friend !!

i want to update date field but i am getting error like

update emp set convert(varchar(50),date_t,121) = '2006-03-31 19:56:36.933'
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'convert'.

please help me out

T.I.A

Shashank

View 20 Replies View Related

Datetime Field - SQL's Problem Or C#?

Mar 30, 2008

Hello

I have a column called *dDateTime*
I insert data in to this column from my C# code.
For example I pass in the value: 2008/03/30 10:27:49.183

However, when I open the SQL Server table it will display the value as : 3/30/2008 10:27:49 AM

I’m using the convert.todatatime(X) in C# - and it looks like it changes the data to 3/30/2008 10:27:49 AM

SQL Server itself puts some kind of ms behind it – doesn’t seem to be related at all :S (but it doesn't use the ms in the uniqueness of the column, it stops at seconds)

Now here is the kicker.
The dDateTime is a unique field, thus when I insert another record with let’s say 2008/03/30 10:27:49.356 IT SHOULD BE OK!!!!!
HOWEVER, it will throw an error: Cannot insert duplicate key in object 'X'. – it ignores the milliseconds when enforcing the uniqueness.
Once the data hits the next second (2008/03/30 10:27:50.632), it will insert fine again, but will miss all data in between.

Is there a setup somewhere that I’m missing?

Thanks in advance!

View 18 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved