RAM Required Per SQL Connection
May 2, 2001
How much RAM is necessary for concurrent SQL connections? My server has 2 Xeon processors, 1GB RAM, a 10GB database size on a TCP/IP box. CPU utilization can run 80-90% and pages/sec can sometimes jump up to 40, especially is the users are running reports from the SQL database. I've been told by some people that I have enough RAM to support the 130 SQL user connections. Others I've been told that I need at least 40MB RAM per user (which means that I'm about 4GB short of RAM). Based on previous entries, I obviously need more, but how much more is the question.
View 3 Replies
ADVERTISEMENT
Jul 20, 2005
I am writing SQL data apps using VB.NET 2003, MSDE is being used as theserver.When I create and instance of the server, it has a the formatmachinename/instancenameThis is fine for the developement machine but how does my code connect tothe server when it is on another machine ? When an instance of MSDE is runon the target, it will produce...anotherPCname/instancenameThanks for any help
View 11 Replies
View Related
Jan 22, 2007
I have a report with this data query:
select ID1 = 6, ID2 = 15, ID3 = 3, ID4 = 3
The data is evidently static here, and hence database access is not required.
Is there a way to omit the connection string in the Datasource, or have a disconnected Datasource that does not connect to any database?
Currently I am setting the connection string arbitrarily, but it would be ideal to omit it altogether.
TIA,
ana
View 1 Replies
View Related
Dec 6, 2006
Hi,
I've been trying to setup a merge replication environment for a SQL Server 2005 publisher. This connection can only happen via the internet and Port 1433 cannot be opened. The replication has to be enabled only via the intenet, which is why i figured web synchronization would be a feasible choice. I've since enabled the publisher and also set up the web synchronization on a SSL based virtual directory.
However, while setting up a subscription on the client machine (using Management Studio), the first step in the wizard is to connect to the publisher.
Essentially, i need to configure a subscriber to synchronize with a publisher using web synchronization over the internet, with no direct connection to the publisher.
I've followed all the steps specified in a multitude of web sites and "Books Online", however, i come back to the same problem at the subscriber.
Is there a way to get around this or am i not doing something correct?
Ashish
View 1 Replies
View Related
Nov 15, 2007
Hi
I am new to .net and sql server....i have just installed VS 2005 and sql server7.0...
I am doing my coding in vb.net......so i wanted to know the connection of the datagrid to the db in my sql server 7.0.
Can some one pls help me with this urgently.
View 6 Replies
View Related
Mar 28, 2007
Hi!
I have developed a database in MS SQL Server 2005 Express, to which I would require only bulkadmin server role from an external java application, because I only need to update rows, insert values or use select queries in the database.
The problem is that, using either the Microsoft JDBC Driver 1.1 or the Java JDBC ODBC Driver and the Windows XP Data Base (ODBC) configurations, I need a user with sysadmin server role inside Sql Server, otherwise JDBC won't connect to the database using the selected user. Even if I leave the sql login with setupadmin or any server role lower than sysadmin, the connection is refused.
Is there no way to connect using JDBC to MS Sql Server 2005 other than granting the connected user sysadmin rights? My code looks as follows:
Code Snippet
String driver = "com.microsoft.sqlserver.jdbc.SQLServerDriver";
String url = "jdbc:sqlserver://FIREBLADE\SQLEXPRESS";
String user = "username";
String password = "password$$";
Connection conn;
Class.forName(driver);
conn = DriverManager.getConnection(url,user,password);
if (conn != null)
System.out.println("SQL Server Connection established ...");
I have heard that Java JDBC connections to Microsoft require high-level access.
Any informed answer is more than welcome. Thanks for reading my post!
View 1 Replies
View Related
Aug 23, 2006
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
View 2 Replies
View Related
Feb 6, 2008
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
View 3 Replies
View Related
Jun 27, 2007
I need to create either a sql query or a procedure and i am not sure how to go about it.Simply i have two fields in a table. 1 for products values and 1 for how many of that product was purchased.What i am wondering is how to calculate this in a sql query.can someone help pleaseIlan
View 5 Replies
View Related
Aug 27, 2007
I am deleting a database but I am not seeing any entry in server logs or in event viewer. and same thing is happens when I am deatching a database.Can any body tell me the way through which I can know when a particualr database was deleted or deatched.
View 2 Replies
View Related
Mar 30, 2004
Psting For Charan,
Hi,
I am trying to connect MS SQL 2000 with C language using ODBC drivers in win 2k environment
i have a UTF 8 string stored in a nvarchar field of the MS SQL table and i am trying to retrieve this field from C and store it in a txt file
everythin is working perfectly fine the probs is that the UTF 8 string is not getting being retrieved correctly
Help Required Urgently
Tks in Adv
Ssg
View 1 Replies
View Related
Oct 26, 2007
Hello All,
When I execute my SP it throws an error.
Could not allocate space for object '(SYSTEM table id: -449020546)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full.
Any help is apperciated.
Nirene
View 2 Replies
View Related
Dec 5, 2007
Hello All,
I have 2 tables Trans & Slmast
In Trans
Tran_type,Tran_amt,Slcode
----------------------------
VES,10000.00,AB01
DBN,20000.00,AB01
CRN,30000.00,AB01
BRT,40000.00,AB01
DBN,10000.00,AB02
CRN,50000.00,AB02
BRT,20000.00,AB03
CRN,30000.00,AB03
In Slmast
Slcode,Sldesc
--------------
AB01,ABC Ltd
AB02,CAB Ltd
AB03,BAC Ltd
All transaction related datas will be in Trans for which Slmast is the master.
I want to sum those records based on slcode,tran_type for slcode which does not have tran_type with 'VES'
Sample Output
Slcode,Sldesc,DBN,CRN,BRT
AB02,CAB Ltd,10000,50000,0
AB03,BAC Ltd,0,30000,20000
View 7 Replies
View Related
Jan 2, 2008
CREATE PROCEDURE VEHICLE_OUTSTANDING @SDt Varchar(10),@EDt Varchar(10),@Cocode Varchar(5),@Brcode Varchar(5),@Loccode Varchar(5),@GLCode Varchar(6)
AS
Select (Loccode+Glcode+Slcode) as LGS,Refno,Refdt Into #VST from Trans_Transnarr
Where Trtype='VES' and (Refdt>=Convert(Datetime,@SDt,103) and
Refdt<=Convert(Datetime,@EDt,103))
and (Cancflg Is Null or Cancflg='R') and Loccode=@Loccode and Glcode=@Glcode
Select Sl.Sldesc,Tr.Loccode,Tr.Glcode,Tr.Slcode,
X.Refno,Convert(Varchar,X.Refdt,103) as Refdt,
Sum(Case When Tr.Trtype='VES' Then Tr.Tramt Else 0 End) as VES,
Sum(Case When Tr.Trtype='DBN' Then Tr.Tramt Else 0 End) as DBN,
Sum(Case When (Tr.Trtype='CPM' or Tr.Trtype='BPM') Then Tr.Tramt Else 0 End) as Refund,
Sum(Case When (Tr.Trtype='JNL' and Tr.Drcrflag='D') Then Tr.Tramt Else 0 End) as JNLD,
Sum(Case When Tr.Trtype='SPS' Then Tr.Tramt Else 0 End) as SPS,
Sum(Case When (Tr.Trtype='CRT' or Tr.Trtype='BRT') Then Tr.Tramt Else 0 End) as Receipt,
Sum(Case When Tr.Trtype='ADV' Then Tr.Tramt Else 0 End) as ADV,
Sum(Case When Tr.Trtype='CRN' Then Tr.Tramt Else 0 End) as CRN,
Sum(Case When (Tr.Trtype='JNL' and Tr.Drcrflag='C') Then Tr.Tramt Else 0 End) as JNLC,
Sum(Case When Tr.Trtype='SRT' Then Tr.Tramt Else 0 End) as SRT
Into #VOS from Trans_Journal Tr,Slmast Sl,#VST X
Where (Sl.Loccode=@Loccode and Tr.Glcode=Sl.Glcode and Tr.Slcode=Sl.Slcode) and
(Tr.Loccode+Tr.Glcode+Tr.Slcode)=X.LGS and (Tr.Cancflg Is Null or Tr.Cancflg='R')
Group By Tr.Loccode,Tr.Glcode,Tr.Slcode,Sl.Sldesc,X.Refno,X.Refdt
ALTER TABLE #VOS ADD OPDR Float,OPCR Float
UPDATE #VOS SET #VOS.OPDR = S.DRAMT,#VOS.OPCR = S.CRAMT FROM #VOS,
(SELECT GLCODE,SLCODE,
(CASE WHEN DRCRFLAG = 'D' THEN OPBAL ELSE 0 END) AS DRAMT,(CASE WHEN DRCRFLAG = 'C' THEN OPBAL ELSE 0 END) AS CRAMT
FROM OBDATA WHERE LOCCODE=@Loccode and GLCODE =@Glcode) S
WHERE #VOS.GLCODE = S.GLCODE AND #VOS.SLCODE = S.SLCODE
Not able to Update OPDR & OPCR
Error Message is
Invalid column name 'OPDR'.
Regards
Nirene Veshnav
View 1 Replies
View Related
Sep 6, 2006
Always wondered, now I have the time to ask - we currently backup ALLdatabases and these seem to all grow in size, the MSDB BAK files are now35mb each and growing!!! Can we remove these from our Enterprise Manager?- Master- Model- MSDBCheers, @sh
View 10 Replies
View Related
Feb 28, 2007
Hi allI am creating a web services application in Visual Studio Dot netwhich links to a MS SQL database.I need to create a form which lets the user pick his field ofchoice(doesnt matter what it is..) using drop down boxes,radio buttonsetc and query the database according to what he has picked andretrieve only those columns and rows.The thing is, I do not want to hardcode the queries usingOleDbDataAdapter or SqlDataAdapter, but want the query to be generatedon the fly, once the user picks his fields from the form.I'd greatly appreciate any help.Thanks,m
View 3 Replies
View Related
Nov 16, 2006
Pl tell me this senario
if we create new database in sql 2000 with size 1024 KB now we insert 500 KB data in that database. so what is actual size of database now?????????
View 3 Replies
View Related
Nov 3, 2006
Hi,
how we use syscolumns in Sql Server 2005 (Its not work in Sql Server 2005)
View 1 Replies
View Related
Jul 26, 2006
I am writting a very simple ASP.NET code, I am simlply trying to
establish a connection with the database in SQL Server 2000 and than
closing the connection but still I am getting an exception,the name of
the database is mydatabase, SQL Server 2000 is running in the windows
authenticationfiltered=SSPI. The name of SQL Server 2000 running
onfiltered=xyz,
I checked the name from SQL Server Service Manager.Also I would like to
state here that I also tryed to establish a connection using C# and the
connection was successfully establish which means that there is no
problem with SQL Server also I sucessfully established the connection
with MS Access and my ASP.NET application which proves that there is no
problem with IIS also.Also please check that the connection string
which I am providing is correct or not.The exception which I am getting
is as follows:
///////////////////////////////////////////////////////////////////////////////
An exception occured while establishing connection
Login failed for user 'xyzASPNET'.
////////////////////////////////////////////////////////////////////////////
Please also note that I have a user with the name xyz/Administrator in
the logins of Sql Server 2000. Also note one more thing that the name
of my PC is xyz, I think that there is some problem with the connection
string which i am providing so please especially check the connection
string that either I have missed some thing or some thing has gone
wrong,also please tell that are there any security restructions for
ASP.NET to access SQL Server 2000 or some thing like that which I have
to remove.The code is as follows:
//////////////////////////////////////////////////////////////////////////////////////
<%@ Page Language="C#" %>
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.Data.SqlClient" %>
void Page_Load(Object sender , EventArgs e)
{
try
{
SqlConfiltered=new SqlConnection("server=xyz;Integrated Security=SSPI;database=mydatabase;");
connection.Open();
Response.Write("<b>Connection is successfully established</b>");
connection.Close();
}
catch(Exception ex)
{
Response.Write("<b>An exception occured while establishing connection</b><br>"+" "+ex.Message.ToString());
}
}
</Script>
The same above code is also present in the attachement file data.aspx ,
please guide me where I am making mistake and please tell me that how
can I correct this mistake so that the code executes correctly.Also
please tell that what things should be included in the connection
string and also please check the connection string of this code.
View 1 Replies
View Related
Feb 8, 2002
Hello Friends...
Need your help !!
I have a database say for e.g Test_db . I have data in the form of Image and text in the database . The image data or symbols corresponds to the right text data . This database is being replicated to other servers . The servers are SQL Server 7.0 with SP 3 .
But when this database is replicated , the subscriber does not get the data in the right form . The image and text fields do not correspond properly as it is on the publisher . But sometimes it works .
This is a strange problem and i could not make out what could be the exact problem .
Does any body have insight of this problem pl .
Any kind of help will be appreciated .
Many thanks in advance .
Yatin.
View 2 Replies
View Related
May 14, 2001
Hi!
I wrote a query in MS-ACCESS using IIF. Is there any way to convert it to SQL Server Query to do the same job as it do in MS-ACCEESS
e.g. Here is manipulation with one column that I did in MS-ACCESS
IIf(InStr(1,Destinations.[Destination Name],"-",1)-1<0,Destinations.[Destination Name],Left(Destinations.[Destination Name],InStr(1,Destinations.[Destination Name],"-",1)-1)) AS COUNTRY,
View 1 Replies
View Related
Mar 23, 2000
I have a table
Table1
------
StudentId Class Test1 Marks1 Test2 Marks2 Test3 Marks3
---------------------------------------------------------------------------
1 1 1 50 3 35 5 40
2 1 1 50 4 40 7 43
3 2 1 47 3 50 6 42
I would like to Insert this data into another table in this form
Table2
------
StudentId Test Marks
---------------------------
1 1 50
1 3 35
1 5 40
2 1 50
2 4 40
2 7 43
3 1 47
3 3 50
3 6 42
Can you write a SQL Query to accomplish this.
Thank you
View 1 Replies
View Related
Mar 15, 2000
Hi,
I have a doubt.....
I have a text field that is 255 bytes in lenght and I want the contents of this full field to be split.....on various gouds which may be ',' or and or 'And' etc
This field stores all the skills...
So i have created a search module ....but this search is taking awfully long as u know text field searches are tedious...
Can u please suggest a way I could parse/split the text field to enable faster search....
Newbie
View 1 Replies
View Related
Sep 26, 2007
I am trying to create a script that will return information from 4 different tables in a database using different where clauses.
This is working correctly, however the primary table the query uses has multiple entries for different people and i only want to return the last row per person.
I have got this to work using a MAX(t.column) statement, but when used in conjunction with all the where clauses things go wrong.
This is what i have
Code:
CREATE VIEW Firereport1 AS
select max(t.punch_id) as punch, e.EMPLOYEE_FIRSTNAME, e.EMPLOYEE_LASTNAME, c.CLOCK_NAME, t.PUNCH_TIME, d.DEPT2_DESCRIPTION
FROM TM_PUNCH t, EMPLOYEE e, COMM_CLOCK c, DEPT2 d
WHERE t.PUNCH_EMPID = e.EMPLOYEE_ID
and e.EMPLOYEE_ONCLOCK <> 'False'
and e.EMPLOYEE_LASTTIMELOC = c.CLOCK_ID
and e.EMPLOYEE_LASTDEPT2 = d.DEPT2_ID
group by e.EMPLOYEE_FIRSTNAME, e.EMPLOYEE_LASTNAME, c.CLOCK_NAME, t.PUNCH_TIME, d.DEPT2_DESCRIPTION
GO
This returns multiple entries because there are multiple unique entries for t.punch_time.
What i was thinking is i need a where statement on t.time_punch, d.dept2_description, c.clock_name
that says something along the lines of where return t.punch_time where t.punch_id=punch (**substitute correct column names**)
This is a sample of the tm_punch table
Code:
PUNCH_ID PUNCH_SEQNR PUNCH_EMPID PUNCH_DATE PUNCH_TIME PUNCH_MODIFIED PUNCH_PC PUNCH_CLOCKID PUNCH_DATA1 PUNCH_DATA2 PUNCH_DATA3 PROJECT_ID
141 0 52 2007-07-05 00:00:00 603 -1 0 0 0 0 0 NULL
142 0 52 2007-07-05 00:00:00 909 -1 0 0 0 0 0 NULL
143 0 52 2007-07-05 00:00:00 911 -1 0 0 0 0 0 NULL
144 0 52 2007-07-05 00:00:00 914 -1 0 0 0 0 0 NULL
If the query works correctly what should be returned is just the line with id 144
can anyone point out where i'm going wrong
View 3 Replies
View Related
Aug 3, 2004
Hi folks; I have two SQL machines; SERVER1 (Publisher) and SERVER2(Pull Subscriber).
Every thing seems to be working but:
I've just imported 17,000 records from another SQL database into a published table of the production server SERVER1 using IMPORT-EXPORT wizard. Now the subscriber doesn't get updated with these records. When i run the merge-agent; the agent just stops with success without pulling the data.
When i set the agent-profile to ROWCOUNT-VALIDATION; it fails at this table.
Publisher db at SERVER1 has recovery-model =FULL
Subscriber db at SERVER2 has recvery-model=BULK-LOGGED
Please help!!
View 12 Replies
View Related
Oct 14, 2004
Hi
I am setting up a site in win XP professional and I am getting problem connecting to a local sql server 2000 installation (developer version)
The problem is that if i specify objects in my select query without an owner name, it can't recognize the object. I need to be able to do this.
Any one know how to fix this? is this a sql server setting??
Thank you.
James
View 2 Replies
View Related
Mar 25, 2008
Hi all,
I have following stored procedure. After executing this
SET @STRSQL = 'SELECT @TABLECOUNT = COUNT(1) FROM [' + @DATABASE1+ ']..CUSTOMERS'
EXEC (@STRSQL)
PRINT @TABLECOUNT
How can I get total count in @TABLECOUNT variable. I am facing error as Must declare variable @TABLECOUNT. Though I have declared it.
Does anyone knows work around for this. Thanks in advance.
--kneel
View 2 Replies
View Related
Jul 20, 2005
I have two related tables in my SQL database that I wish to join as follows:------------------------------------tblCustomersID (pk)Nameetc.tblCustomerManagersID (pk)CustomerID (fk)Manager (this *is* an fk but for the purposes of demonstration isnot)StartDate (indicates the date upon which the manager took / is takingcontrol of the company)------------------------------------Example entries are:tblCustomers1 Microsoft2 Symantec3 BorlandtblCustomerManagers1 1 Barry 01/01/032 1 Peter 01/07/033 2 Norman 01/02/034 3 Terry 01/01/035 3 Peter 01/07/05------------------------------------What I want to do is extract, in one query, a list of all customers andtheir *current* associated manager, so the result set today would be:Microsoft Peter 01/07/03Symantec Norman 01/02/03Borland Terry 01/01/03Currently I have:SELECT [Name], [Manager], [StartDate]FROM tblCustomersINNER JOIN tblCustomerManagers ON tblCustomerManagers.[CustomerID] =tblCustomers.[ID]WHERE [StartDate] <= GETDATE()ORDER BY [Name], [StartDate] DESCbut this obviously returns multiple entries for customers having managersprior to today eg:....Microsoft Peter 01/07/03Microsoft Barry 01/01/03....I know this is a simple question but I cannot think of a way of doing itwithout making the query extremely complicated.Any help is appreciated,Thanks,df
View 2 Replies
View Related
May 7, 2007
Hi,
I wanted to use MS SQL Reporting services with Oracle as database.
Please let me know whether the installation of Sql Server Database is required in this case?
Please, can any one suggest me in this regard.
Thanks
View 1 Replies
View Related
Jul 10, 2007
The Background:
I have a SQL Serever with more than 10 million records.
I have to update/delete/insert records on a daily basis.
I am using the standard edition of SQL Server.
The tables are constantly having data inserted into them and the server has different jobs running all day long.
My Problem:
I cannot create index on my database and the database is getting really slow as each month/year passes.
Any/All suggestions are welcomed.
View 10 Replies
View Related
Jan 17, 2006
I would like to take advantage of either Merge or RDA replication over HTTP, but would like to avoid setting up IIS.
Is IIS always required to support connectivity for SQL Server Mobile replication back to a desktop SQL Server database?
Thanks, Tim
View 6 Replies
View Related
Mar 26, 2008
Hopefully someone can answer this as I am yet to find any definitive information.
User access reports by default on port 80.
Report Manager and Report Viewer are on machine A. Catalog database is on SQL Server machine B along with the database being reported on.
What ports are required to be open between machine A and machine B? Does it use standard SQL port 1433, are there any other ports used?
Thanks
View 1 Replies
View Related
Aug 16, 2007
Hi All,
Need some suggestions for senior management for DR Purposes:
Background:
WSS/MOSS2007 is being used as a Document Management solution.
17 Servers geographically dispersed around the UK. Each server runs WSS 3, SQL Server 2005 and IIS. Each server is linked into a PiP cloud via 2MB MPLS.
At each location; We are looking at 20 core databases; each pre-sized to 10GB. If I take one site as an example, the previous nights backup totalled 135GB.
The company has taken a centralised view on backup's, so SQL Server Data and Log files are replicated using Double-Take to a central location where by the files are taken onto tape daily (Full backup of all files).
As a precaution, I take a Full SQL Server backup daily and also Tran Logs every 4 hours locally and keep it there for 2 days; however if the site goes boom I loose those, so for this purpose; please forget they exist.
As I expect; when I restore the mdf and ldf files from tape, I will get errors when I attach those files into SQL Server for transactional inconsistencies which I'm well aware of.
Other options I've considered are:
1) DB Mirroring. Not a bad option, but still have to get the DB to the Mirror Server in the first place. Also DB Mirroring is not recommended for more than 10 mirrored databases.
2) Log Shipping. Same issue as above; Have to get the data here in the first place. Then once Log Shipping is setup; if I have a failure; I need to start the whole lot off again.
3) Transactional Replication. Issue is with the initial replication getting the data from A to B, then if I need to use it in a DR situation; I will get issues saying this table is being used for replication. This can be worked around, but it's a not a quick process...
4) 3rd Party Backup Compression. E.G. Litespeed; Redgate SQL Backup, etc. Good; Tests have shown a 42% compression for us, however if I refer to the earlier example of 135GB, this compresses to 81GB. Throw in the theoretical max for a 2MB link of 19GB / 24 Hours, this would take 4 Days to copy.
Other thoughts I've come up with are:
A) Split the tables into different file groups; not sure how easy this would be as the DB's and Tables already exist.
B) Full/Diff/Tran. Still have the issue of scheduling the full backup over the weekend and taking 4 days to get here.
C) Local Tape Backups. Issue is relying on someone to change the tape on a daily basis. It's not centrally managed and how do we restore in a DR situation ?
Could someone give me some pointers please?
Thanks
Steve
SQL DBA.
View 6 Replies
View Related
