Hi ,
I created 3 tables in SQL server magmt studio as
student - sno (pk), sname
subjects - subno(pk), subname
marks - sno(fk), subno(fk), marks
While creating the report model:
1.Created the data source - no problem
2. created the data source view - no problem added all 3 tables here.
3. created the report model - only subject and student show up here. Where is the marks table?
Please help
Regards,
Reshma
While building Report Model Solution in Business Intelligent Studio i am getting following errror-
More than one item in the Entity 'table' has the name 'columns'. Item names must be unique among immediate siblings.
Please advice how to resolve this one.
Thanks
Ashwin.
I want to create a new report model project, however in VS Business intelligence Development Studio, I could find the report model template in the New project dialog box. Anyone coulf tell me how can I add the templeate? Thanks
View 1 Replies View RelatedI hope someone can clarify what I observe below.
When I add a certain Table into my report model, one of the fields is not automatically converted into an attribute, but I'm not sure what the exact pattern is.
This table has 3 fields as its key, two of them get included and one does not. The one that does not, is also added as a Role as it is used in a relationship within the DSV (Data Source View).
Does anyone know what rules BIS (Business Intelligence Studio) uses in deciding which fields to automatically convert using the wizard and which to skip?
Perhaps I'm doing something wrong, or there is a workaround?
If anyone can shed any light in the issue, I'd greatly appreciate their comment.
Thanks in advance and kindest regards
Craig
Hello to everyone!
I would like to ask you sthg as far as the e-r model is concerned!
I haven't started of course to use SQL yet,cause i have to make the e-r model first.
I have a a question to make :
For example i have to keep data for a Personal Computer (PC)
So i have the entity : COMPUTER
COMPUTER has many characteristics/fields like the primary key which is going to be PC_ID and it's unique for every computer,NAME_OF_PC the name and also TYPE_OF_MOTHERBOARD, TYPE_OF_RAM, TYPE_OF_HARD_DISK etc.
I have to keep for the TYPE_OF_MOTHERBOARD the manufacturer, the motherboard's code etc.
Shall i make an entity for the motherboard or for the HARD_DISK or for the RAM?
Cause i want next to change these fields of every COMPUTER if it's n eeded!
e.g. i have the PC_ID = 12 and i want to change the hard disk cause it's not working!(shall i keep an entity of the hard disk or not?)
Can sm advise me what i shall do?
Thanks, in advance! :)
My company is new to MDS. I am trying to set an attritube in an entity to read only so the users can't change the value in that field. When I did that, the whole model disappeared. I thought I had deleted it by accident so I created a test model and tried to do the same. The test model disappeared. This time, before saving the new settings I took a snapshot. After saving I took another snapshot. You can see that the whole model is gone (zz_RN_Permissions_Test). I tried every other coworker with admin rights and nobody shows it on the Models list. The behavior on the Excel add-in is correct. I can't change any values on that column. But I need to keep the models available.
See before and after snapshots below.
Running 2005 Beta 3 Refresh. When I first deploy, it works fine. Subsequent deployments yield the following error:
View 9 Replies View RelatedI am trying to create an opportunity report that includes notes from the notes entity. Unfortunatly, when I pull the fields from the notes entity into my reports, it seems there is no way to tie the notes to specific opportunities or accounts that they are associated with and I get all notes under the first item listed on my report. Is there a way to link data sets like Access lets you link tables?
View 3 Replies View RelatedHi, I created a Session model via the following
CREATE SESSION MINING MODEL test
(
HCVS_MemberId Text KEY,
HCVS_MeasureDate_Float LONG KEY TIME,
HCVS_MeasureDate Date Discrete,
SysPressure LONG CONTINUOUS PREDICT,
DiaPressure LONG CONTINUOUS PREDICT,
Pluse LONG CONTINUOUS PREDICT
) USING Microsoft_Time_Series ;
How do I specify that I would like to Mean to fill the gap of missing values?
Thanks,
Ricky.
Been practicing DR strategies with a test SQL instance by following the scenarios listed here: [URL] ....
> Took a backup of the Model database
> Stopped SQL Server
> Deleted model database data & log file
> Started SQL Server and it obviously wouldn't start because TempDB needs a model database present.
> Started SQL instance with trace flags 3608 & 3609
> Connected to SQL instance using command prompt.
> Issued restore command but was met with this error:
Shared Memory Provider: The pipe has been ended.
Communication link failure
And found this in the SQL log..
2015-08-12 16:21:32.83 spid51 Starting up database 'tempdb'.
2015-08-12 16:21:36.88 spid51 Error: 3456, Severity: 21, State: 1.
2015-08-12 16:21:36.88 spid51 Could not redo log record (59:136:21), for transaction ID (0:0), on page (1:20), allocation unit 458752, database 'tempdb' (database ID 2). Page: LSN = (30:165:3), allocation unit = 458752, type = 1.
[Code] .....
I've created a linked server with a pretty basic Excel spreadsheet, and used this command to create a linked server to it:
sp_addlinkedserver ''XL_SPS_1', 'Excel', 'Microsoft.Jet.OLEDB.4.0', 'c:MyExcel.xls', null, 'Excel 8.0'
I want to use this as the data from which to build a report model. As linked servers don't show up in the Data Source View wizard, I created a view in SQL Server:
create view MyExcel
as
select * from XL_SPS_1...Sheet1$
Okay, great, now the view shows up in the DSV wizard and I can create the data source view. However, when I create a new report model based on this data source view, the Report Model Wizard tells me at "Create entities for all tables" that I've got an error when it processes dbo_MyExcel that "Table does not have a primary key."
I assume this is where the identifying attributes for the entities in the report model are taken from, so I really can't go further. Does anyone have an idea as to how to add a primary key to a linked server (Excel) in SQL 2005? Can this be done? Other than importing spreadsheet data to a SQL table, how can I get around this?
Thanks,
--Stan
Hi,
I have created and deployed a data source (which uses "Credentials supplied by the user running the report") and a model which uses this data source.
Also I have built a report using Report Builder and all works well.
Now I wish to use Visual Studio to build a report, so I'm trying to create a data source from my computer which the report should use and I want it to use the model on the remote server. In the Report Wizard I am using "Report Server Model" and the following connection string:
Server="http://<remoteserver>/reportserver";datasource="/Models/MyModel"
IHowever I can't make the credentials to work. I've tried them all with no luck. What username/password must I use? Because so far nothing of what I have tried works.
Any help is highly appretiated.
Kind Regards,
Robert
Hi,
I've created dsv that contain all fields from table database. in the smdl I've remove some fileds due to security. All fields in the smdl do not contain drill.
Issue: When I created calculated field in the report builder the field has a link. When I clicked the drill I saw all the record data including field that not in the smdl.
Questions:
1) Can I remove the link from the calculated fields?
2) Can I prevent from users drill to fields that not in the smdl?
Thanks,
Assaf
Is it possible to dynamically refresh the report model of the report builder?
could it even be using code with any of the interfaces?
When we add a table or add a column to the table in database , will the report model get refreshed automatically or do we need to do it externally. If so, can we use any of the objects and write a custom code in VB.
I get this error message:
Semantic query execution failed.
The 'PerspectiveID' custom property for the 'query' perspective is either not set or is not set to the string data type.
The report model does have a perspective.
Anyone else seen this?
In Report Designer I am able to create a Model data source and see my entities/fields.
But when I run the report I get a "Failed to execute Query" message.
I know in the past this was an issue because Designer doesn't allow you to specify a perspective.
Does anyone know if this has been resolved?
I'm using SP2
Thank you,
Joe
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
I have a report model that I am trying to deploy using report manager web service. A folder is created by the administrator to place all my SSRS reports. I deployed .rdl files using the "Upload file" function in "Report Manager". All the SSRS reports work fine but when I tried to upload .smdl file (report model file) using the Report Manager's "Upload file" function it gave me the following error message.
The permissions granted to user 'xxxxxxman' are insufficient for performing this operation. (rsAccessDenied)
Does this mean I only have permission to upload .rdl file but NOT .smdl file to my designated folder?
I'm having some difficulty linking a custome drilldown or clickthroug report to another report that I have already created in report builder. I followed a MSDN article found at http://msdn2.microsoft.com/en-us/library/ms345226.aspx but I cannot find the " Select a page area, select Drill-through reports" option in report manager. Does anyone have a better explanation on how to do this? I'm assuming that when you create the clickthrough report there has to some sore of filter on it that relates to the item of the clickthrough. I guess I'm I little confused, any help would be great. Thanks.
View 5 Replies View RelatedHello,
I've created a Report Model Project that can be used by Report Builder to generate ad-hoc reports. I'm trying to create a connection string in my Report Server Project that points to the Report Model Project data source view.
All I can do is create a regular datasource, which bypasses the metadata contained in the Data Source View.
Basically I want my Report Server Project and my Report Builder reports to leverage the same metadata. Is this possible? If so how do I get the connection string?
Thanks!!
-Matt
I'm creating report model using named queries. Is it possible to specify parameters?
View 3 Replies View RelatedIs there an API or a way to consume a Report Model? I want to try and roll my own simple web-based / thin-client Report Builder without using the ClickOnce control.
Thanks,
--jason
Here is one scenario. There is category X which has subcategories A,B,C,D. A has 5 products and B has some 7 products, C 5 products and D has some 12 products. My problem is I need create a Report model where is if we select X
all the list of subcategories and their products should be displayed. I.e if we select X then
A
1
2
3
4
5
B
1
2
3
4
5
C and so on..........every thing should be displayed that are under category, i.e subcategories under that category and the products under each subcategory of that category.
Can anyone please help me out to create a Report Model to generate ad hoc reports
hi everyone,
I created a report model and deployed it. When I open the rpt builder on web I get the following error.
'The selected data source does not have and content available'
Seemed like it would be a easy issue, but I cannot retrieve any data in the rpt model. The datasource I'm using does work for rpts not associated with the rpt model. Any suggestions? It seems like I've missed a step. Thanks, Lisa
Hi All,
I'm a newbie to Report Model and not able to find some conceptual information, Can you guys answer following:
I€™ve
Employee [Name]
->Employee_Days [Day] (1-*)
->Employee_Day_Activities [Activity_Type, HoursSpent] (1-*)
schema and a generated model out of it. Now I€™ve few report requirements which will be developed based on Report Model. These Reports needs aggregate of All similar activities and the hrs spent and it'll be shown with every employee. Like Employee Xyz has spent 14 hrs total on Sick Activity, which will be shown as
Employee Sick Hrs Maternity Hrs WorkHrs
Xyz 14 0 20
Now i need to know the approach to develop it like i'v to ways in my mind
- create 3 custom fields(Sickhrs,Maternityhrs,Workhrs) in the Employee Entity(model), so that managers can create reports like above by simple drag and drop
- leave model as it is.. just create more descriptive fields in all the three table and let managers do the activity grouping etc to develop report like above..
Which approach should i follow? Moreover can you point me to some conceptual info like how report model works..etc..
regards
faraz
Hi,
I just wonder if anyone comes across this problem. When I generate a report model based on a cube, I got this error
The ID property for the Role 'xx' has a local name that exceeds the maximum length of 250 characters. (IDLocalNameLengthExceeded) Get Online Help
note: xx is my cube name.
It used to work fine before and I have changed anything since then so I don't know why it fails now. Please help!
Thanks in advance
Hi, it's my first time for using report model as the datasource of reporting service. But I don't know how to build the query string to get data from the report model.
Can anyone help me?
Thanks
Hi,
I am using Oracle 9.2.6.0 and SQL 2005 SP2.
I have created a report model based on Oracle DB.
I use .Net Providers/Oracel Client Data Provider driver for my data source to connect to Oracle. It works fine but the performance is a bit slow.
Then I tried to use .Net Providers for OLEDBOracle Provider for OLEDB driver. When I deploy, I got the following error message: "System.OleDB".
I tried to use my last resort, which is Native OLEDBOracle Provider for OLEDB. When I deploy, I got the following error message: "Exception of type 'System.NotSupportedException' was thrown".
Anyone has this issue before?
What is the best driver to use and what is the best approach in term of performance.
Thanks and Regards,
XL
Hi,
I've looked in vain for an answer to this, and it seems like it should be simple. Some new fields have been added to a table, and I need to add them to the Report Model. When I go to the data source view, the new fields do not show up in the table. Is there an easy way to get the new fields to show up, or do I need to delete the table (and of course the relationships), and then add it back. Thanks for any help.
The Adventure Works Model comes with 'Sales Person' entity inheriting 'Employees'. The Binding dropdown in the inheritance property for 'Sales Person' provides a 'FK_SalesPerson_Employee_SalesPersonID' choice.
The Refining a Report Model in Model Designer Tutorial Lesson 10: Inheriting Properties from Other Entities, walks you through the process of setting this inheritance, but the Binding dropdown, after you set InheritsFrom to Employee, provides only the (None) choice. Anyone know why?
Hi,
I am using report model as my data source and when I preview my report, I got the following error message:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create command for data source 'xxxx'. (rsErrorCreatingCommand)
An attempt has been made to use a data extension 'SQL' that is not registered for this report server. (rsSemanticQueryExtensionNotFound)
Anyone has any idea how to fix it?
Many Thanks,
UT
First, let me freely admit I know nothing about report models or how to deploy them. I was trying to learn by going through the tutorials. The creating part I get, but the deployment part seems to be over my head.
The error message I get is "A connection cannot be made to the report server http://hqjds02/Reports."
I don't understand why. Yeah...I get that it can't connect for some reason. Probably because I have messed things up somehow.
This is how I've got the deployment properties set:
TargetDataSourceFolder: Development (DV)/Data Sources
TargetModelFolder: Development (DV)/Models
TargetServerURL: http://hqjds02/Reports
In searching for an answer earlier I saw where someone wrote that I should be able to go to the URL and copy and paste it from IE. The actual URL is http://hqjds02/Reports/Pages/Folder.aspx?ItemPath=%2fDevelopment+(DV)&ViewMode=Detail . I tried it, but it didn't work.
What am I doing wrong?
Thanks,
Jennifer
Hi!
I've created a report with Report Builder using a Model. I want to keep the same report, but I have to use another model (this model is almost the same as previous one, except that it has some extra tables).
I tried to change my report's model from Report Manager (Report_Name -> Properties -> Data Sources), but it didn't work.
Any suggestions?
Best regards.