RESTORE FILELIST Is Terminating Abnormally Error When Running A DTS Package In SQL 2005. Works Fine In SQL 2000
Oct 10, 2007
Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):
Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.
Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.
BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).
(5 row(s) affected)
Msg 213, Level 16, State 7, Line 1
Insert Error: Column name or number of supplied values does not match table definition.
Msg 3013, Level 16, State 1, Line 1
RESTORE FILELIST is terminating abnormally.
The code I am using is:
-- the original database (use 'SET @DB = NULL' to disable backup)
DECLARE @DB varchar(200)
SET @DB = 'Marketing'
-- the backup filename
DECLARE @BackupFile varchar(2000)
SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'
-- the new database name
DECLARE @TestDB2 varchar(200)
SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'
-- the new database files without .mdf/.ldf
DECLARE @RestoreFile varchar(2000)
SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2
DECLARE @RestoreLog varchar (2000)
SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2
-- ****************************************************************
-- no change below this line
-- ****************************************************************
DECLARE @query varchar(2000)
DECLARE @DataFile varchar(2000)
SET @DataFile = @RestoreFile + '.mdf'
DECLARE @LogFile varchar(2000)
SET @LogFile = @RestoreLog + '.ldf'
IF @DB IS NOT NULL
BEGIN
SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')
EXEC (@query)
END
-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'
-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'
-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'
-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'
IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)
BEGIN
SET @query = 'DROP DATABASE ' + @TestDB2
EXEC (@query)
END
RESTORE HEADERONLY FROM DISK = @BackupFile
DECLARE @File int
SET @File = @@ROWCOUNT
DECLARE @Data varchar(500)
DECLARE @Log varchar(500)
SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')
CREATE TABLE #restoretemp
(
LogicalName varchar(500),
PhysicalName varchar(500),
type varchar(10),
FilegroupName varchar(200),
size int,
maxsize bigint
)
INSERT #restoretemp EXEC (@query)
SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'
SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'
PRINT @Data
PRINT @Log
TRUNCATE TABLE #restoretemp
DROP TABLE #restoretemp
IF @File > 0
BEGIN
SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +
' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +
QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)
EXEC (@query)
END
View 1 Replies
ADVERTISEMENT
Jun 21, 2007
'm a noob, using MS SQL 2005. Trying to use a stored procedure I got from SQL 2000 DB integrity to work with 2005. Receiving:
Message
Executed as user: MMCRSDOM eletracksql. Insert Error: Column name or number of supplied values does not match table definition. [SQLSTATE 21S01] (Error 213) RESTORE FILELIST is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
Please help.
View 2 Replies
View Related
Mar 28, 2008
I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.
I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.
/* Update WeekEnding Date for current weeks WeeklySales Records */
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null
Weekly sales has approx 100,000,000 rows
Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.
I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.
One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.
Stacy
View 5 Replies
View Related
Apr 19, 2007
Hello,I am getting the rather odd error below; hope you can help.RESTORE DATABASE is terminating abnormally. File 'C:Program FilesMicrosoftSQL ServerMSSQL.1MSSQLData rial_44testingc' is claimed by'sysft_KB_SearchAssetsCatalog'(65540) and 'sysft_KB_SearchCatalog'(65537).The WITH MOVE clause can be used to relocate one or more files.I get this from an app our company uses to programatically restoredatabases. Below are the queries we are using:Create database trial_44testingcselect COUNT(*) as TOTAL from sysdatabases where name = 'trial_44testingc'RESTORE FILELISTONLY FROM disk ='C:HostedTrialManagementAppSourcedb43_trialmas ter'RESTORE DATABASE trial_44testingc FROM disk ='C:HostedTrialManagementAppSourcedb43_trialmas ter' WITH RECOVERY , MOVE'43_trialmaster' TO 'C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLData rial_44testingc.mdf', MOVE '43_trialmaster_log'TO 'C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLData rial_44testingc.ldf', MOVE'sysft_KB_SearchCatalog' TO 'C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLData rial_44testingc', MOVE'sysft_KB_SearchTicketsCatalog' TO 'C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLData rial_44testingc', MOVE'sysft_KB_SearchTicketsCatalog2' TO 'C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLData rial_44testingc', MOVE'sysft_KB_SearchAssetsCatalog' TO 'C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLData rial_44testingc'This had been working great until I made some updates to the table structureof the db and created a new backup.Any ideas?TIAJake
View 1 Replies
View Related
Dec 5, 2000
Hi,
This is the problem which we face now and then. There is an automated job that run everyday night to restore the Database for reporting purposes. Before running that job an NT Task Schedular stop starts the sql server. This is to make sure that all the connections are closed. Nobody uses it at Night. But some times the job fails with bellow error message...
"Database in use. The system administrator must have exclusive use of the database to run the restore operation. [SQLSTATE 42000] (Error 3101) Backup or restore operation terminating abnormally. [SQLSTATE 42000] (Error 3013) Associated statement is not prepared [SQLSTATE HY007] (Error 0). The step failed."
Should I make the DB option set to single user mode. I don't think that is the problem.. because it runs fine most of the time..but sometime it fails.
Please help.. Thanks in advance :-)
Shyam.
View 2 Replies
View Related
May 12, 2008
Hi! I have a db with Full recovery model, when i try to run Transaction Log Backup, i get this error- sometimes sooner than reaching 90 percent, in spite of friendly working that i had before.
10 percent processed.
20 percent processed.
30 percent processed.
40 percent processed.
50 percent processed.
60 percent processed.
70 percent processed.
80 percent processed.
90 percent processed.
Msg 3202, Level 16, State 2, Line 1
Write on "D:Simaap_BackupSimaapFullBackup_870218" failed: 112(error not found)
Msg 3013, Level 16, State 1, Line 1
BACKUP LOG is terminating abnormally.
Any solution would be appreciated!!
Thanks!
View 6 Replies
View Related
May 8, 2008
I am receiving an error
"Database 'MyDatabase' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. BACKUP DATABASE is terminating abnormally."
each time I click on the button code below.
Code Snippet
Private Sub BACK_UP_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BACK_UP.Click
cmd = New SqlCommand("BACKUP DATABASE" & Me.cbdatabase.Text & "TO DISK = 'Documents and SettingsMy DocumentsPERSONAL DOCUMENTSfilename.bak' ", conn);
conn.Open()
cmd.ExecuteNonQuery()
conn.Close()
End Sub
The VB application is running from an Open SQL Server 2005 user account - ie No user account has been created for it. Do anyone know how I can resolve this issue from VB 2005 Express.
View 9 Replies
View Related
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
View 8 Replies
View Related
Jun 26, 2007
hi,
I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.
Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.
Any ideas?
View 4 Replies
View Related
Oct 17, 2006
This one has me stumped.
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
View 2 Replies
View Related
Mar 15, 2006
I have a 64bit Ent Ed, Created a SSIS package, deployed it, its running when running from sql server but not running as a job
View 1 Replies
View Related
Jan 26, 2007
I am getting the ubiquitous error....
"The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I have a stored procedure that performs a task on a loop. Sometime it fails, somtimes it succeeds and that's just fine, the errors are handled within the stored procedure and I return counts of success and failures.
The trouble is that the package execution terminates when even one of the task fails. I don't want it to, I just want it to continue as the pakage should then go on to extract the source of the failues and post them back where they came from.
Any ideas how I can achieve this?
I have tinkered with the MaximumErrorCount setting, but I get the same result regardless of whether this is set to 0, 1, or 99999.
I also have a 'failure' path leading from the SQL task, but the package does not follow it.
I'm using an OLE DB connection and when none of the tasks fail, the process works perfectly.
Any ideas, most appreciated.
View 8 Replies
View Related
Sep 12, 2007
Hello I am receiving the dreaded mail error listed above. I can send out a test E-mail from Enterprise Manager to operators, but I cannot run this Transact query:
EXEC master.dbo.xp_sendmail @RECIPIENTS = araz***@***.com(removed email address),
@SUBJECT = 'test'
I receive:
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x80040111
I have stopped/restarted the SQL SERVER AGENT but haven't done much else as I haven't been able to.
Should it work through transact SQL if the test email works from Enterprise Manager?
This is SQL 2000 SP4 running on Win2K in the domain. Thank you.
View 8 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 31, 2008
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
View 3 Replies
View Related
Jun 13, 2007
This should be a very easy question.
I'm trying to develop an SSIS package that will eventually do many things, but I can't get it to do very basic things.
My current test package has 2 tasks in it:
1) File System Task ( FST )
2) Execute SQL Task ( EST )
When running just the SSIS package via the VS2005 IDE ( as startup project ), everything works fine. The FST moves a file from DIR_A to DIR_B and the EST inserts a test record into the test table.
If I set my C# app to the the startup project and execute the package from within the C#, it kinda works. The FST works fine, but the EST does not work and the package returns a "FAILURE" code to the C#.
The EST is incredibly basic. This is the SQL text:
insert into tmpssis ( tmpdata ) values ( 66 );
I'm using ADO.NET, Direct input, FALSE for IsQueryStoredProcedure, and it's using the only connection I've set up to the database.
The FST block runs - the file gets moved, but then it fails on the SQL block for some reason.
I'm open to any suggestions.
Thanks,
-BEP
View 6 Replies
View Related
Jul 19, 2007
I am attempting to move some SQL 2000 databases to SQL 2005. My main production database does not seem to want to move. When I use the SQL 2005 GUI the .bak backup file is marked 'Incomplete'. When I attempt to restore the backup file I get a 'RESTORE detected an error on page (0:0) in database' message. I saw a thread in the SQL Express forum suggesting trying to restore from the T-SQL level to get the GUI out of the picture and I get the same 'error on page (0:0)' message. However when I take the same file and use SQL 2000 Enterprise Manager it restores with no problems.
Any ideas?
Thanks
Mike Mattix
View 8 Replies
View Related
Mar 23, 2015
I have simple query which creates tables by passing database name as parameter from a parameter table .
SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .
Note** I am not passing any database of name '20'
Exception handler error :
ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------
Error in SSIS
[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .
View 6 Replies
View Related
Dec 17, 2007
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
View 5 Replies
View Related
Apr 11, 2007
I backup the database into tape0 using management studio and can see the contents in the backup media.
However when I tried to restore, the error "timeout expired" appears and sometimes together with the error "restore headeronly is terminated abnormally".
Please advice and thank you in advance!
Below is the error message:
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteWithResults(String query)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSqlWithResults(Server server, String cmd)
at Microsoft.SqlServer.Management.Smo.Restore.ReadBackupHeader(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseGeneral.buttonSelectDevice_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
===================================
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
------------------------------
Server Name: NTSRV1
Error Number: -2
Severity: 11
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)
View 3 Replies
View Related
Mar 25, 2008
Hi..
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22
Code: 0xC0202009
Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle.
I have oracle 9i client installed on the server and sql server is 2005.
Any help would really be appreciated..
View 4 Replies
View Related
Apr 25, 2008
Hello to all,
if have a problem with a SELECT query that works very fine on SQL Server 2000 but not on 2005. I've transfered my db by creating a full backup and restoring the db on 2005. The db is working except this problem.
When i start executing it doesn't finish. I waited a couple of minutes. On 2000 it only takes about 6 seconds to run.
Here it is:
Code Snippet
SELECT * FROM PPS_TERMbesttmpwhere PPS_TermBestTmp.BestNr + CONVERT(varchar(30),CAST(REPLACE(PPS_TermBestTmp.Pos1, ',', '.') AS float),2)
NOT IN (SELECT PPS_TermBest.BestNr + CONVERT(varchar(30), PPS_TermBest.Pos1,2) FROM PPS_TermBest)
Any ideas?
Thanx
Alex
View 7 Replies
View Related
Mar 16, 2006
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
View 6 Replies
View Related
Mar 18, 2008
Hi,
I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 9:24:30 AM
Error: 2008-03-18 09:24:32.54
Code: 0xC0202009
Source: IMALCRM Connection manager "IMAL SRC"
Description: An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H
result: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC020801C
Source: Load Fund Detail V_FUND_DETAIL [16]
Description: The AcquireConnection method call to the connection manager "IMA
L SRC" failed with error code 0xC0202009.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC0047017
Source: Load Fund Detail DTS.Pipeline
Description: component "V_FUND_DETAIL" (16) failed validation and returned er
ror code 0xC020801C.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC004700C
Source: Load Fund Detail DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC0024107
Source: Load Fund Detail
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:24:30 AM
Finished: 9:24:32 AM
Elapsed: 2.078 seconds
View 5 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Mar 26, 2008
If this post belongs somewhere else I appologize. I have spent several days trying to solve this problem with no luck. My site is online. Hosted at NeikoHosting. I can connect to the database remotely when adding a datacontrol. It tests fine. But when running the page it won't connect. Even if I go in and change the Web.Config connection string to a local Data Source provided to me by Neiko, it still won't work. It just won't connect. Here are the two connection strings in the Web.Config, minus my login info: Only the remote string will pass testing. Neither works on the site. <add name="yourchurchmychurchDBConnectionString" connectionString="Data Source=MSSQL2K-A;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" />
<add name="yourchurchmychurchDBConnectionString2" connectionString="Data Source=66.103.238.206;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" />
Here is the stack trace, if that helps.
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[OleDbException (0x80004005): [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.]
System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) +1131233
System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +53
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.OleDb.OleDbConnection.Open() +37
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.FormView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.FormView.EnsureDataBound() +163
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +50
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
So....... HELP!!!!
Thank you!
View 3 Replies
View Related
Feb 6, 2004
My DTS Package work fine if I Execute it manually, but I need to do it automatically just after midnight. I defined my schedule and made sure the job was present in the SQL Server Agent>Jobs, but it fails and the Job History shows the following error:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 1901 (76D) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
Help!!!
View 3 Replies
View Related
Mar 31, 2004
hi all
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin
declare @current_date datetime
set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from
(
(
select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min"
from topcat.class_contact
where status ='callback'
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) <> 0)
order by callback_date asc
--order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc
)
union
(
select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'callback'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) = 0)
order by callback_date asc
)
union
(
select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'No Connect'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
order by callback_date asc
)
union
(
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
)
) contact_queue
order by priority desc, recency desc, callback_date asc, frequency desc
end
View 1 Replies
View Related
Apr 28, 2008
Hi,
I have a report which has multivalue parameters enabled and If i give NULL it displays everything correctly. But if I give different ClientId it doesnt do it in the report.. But if i run my sproc in VS2005 and in ssms it works the way i want it. this is my sproc
Code Snippet
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]
@StartDate datetime,
@EndDate datetime,
@ClientId nvarchar(max)= NULL
AS
Declare @SQLTEXT nvarchar(max)
if @ClientId is NULL
BEGIN
SELECT
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
--cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId -- and o.CreatedByUserId = cp.UserId
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
--cp.ClientId = @ClientId
--AND
o.OrderDate BETWEEN @StartDate AND @EndDate
ORDER BY
o.OrderId DESC
END
ELSE
BEGIN
SELECT @SQLTEXT = 'Select
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
--cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId --AND cp.ClientId in ('+ convert(Varchar, @ClientId) + ' )
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
cp.ClientId in (' + convert(Varchar,@ClientId) + ')
AND
o.OrderDate BETWEEN ''' + Convert(varchar, @StartDate) + ''' AND ''' + convert(varchar, @EndDate) + '''
ORDER BY
o.OrderId DESC'
exec(@SQLTEXT)
END
--return (@SQLTEXT)
I have 2 datasets in this report one for the above sproc and other dataset that gives me the clientname and it is as follows
Code Snippet
ALTER Procedure [dbo].[usp_GetClientsAll]
@ClientId nvarchar(max) = NULL
AS
--Declare @ClientId nvarchar(max)
SELECT
NULL ClientId,
'<All Clients >' ClientName
FROM
Client
Union
SELECT
ClientId,
ClientName
FROM
Client
Where
ClientId = @ClientId
OR
(
ClientId = ClientId
OR
@ClientId IS NULL
)
In the first dataset Parameter list i have omitted ClientId but kept it in the report parameter.. So when i give select all it works.. but when i just select particular it gives me the same result as Select all..
any help will be appreciated..
REgards
Karen
View 11 Replies
View Related
Jun 4, 2007
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.
The error that I'm getting is this:
[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.
[rsNone] An error has occurred during report processing.
Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!
View 3 Replies
View Related
May 11, 2007
We are running MS RS and SQL Server 2000 SP3.
We have one LEDGER, where all the daily activities are stored. The LEDGER table has 4 indexes (1 clustered and 3 non-clustered). To get AR we use this table.
Well problem is some times in 1-2 months, any simple AR query takes a long time and every other client gets slow response (queries are very slow or sometimes block).
If we DROP any index on LEDGER table and again put it back (RECREATE), all our queries work fine and faster. This goes on till 1-2 months, till we see the same issue again.
This is a classic case happened today. Queries were running fine till morning 8 AM. We upload some 50 thousand records to Ledger table (Data Conversion). Well after 30 mins, all simple AR queries started taking a long time. We DROPPED an index in LEDGER table and everything was faster....Just to be same we added back the same index again.......everything is Faster.....
What is this. ....is it our QUERY, index or huge Transactions or no free space ???
We are scheduled to run SP4, next week. But is there any solution in the mean time on what is this?
Also is they any way to KILL all SQL server processes that take more than a mins. We just don't want ALL our client to Slow down because of one query????
Thanks,
View 3 Replies
View Related
May 4, 2006
Hey I had a table with a column of data encrypted in a format. I was able to decrypt it and then encrypt it using Symmetric keys and then updating the table column with the data. Now, there is a user sp which needs to encrypt the password for the new user and put it in the table. I'm not being able to make it work. I have this so far. Something somewhere is wrong. I dont know where. Please help Thanks. I used the same script to do the encryption initially but that was for the whole column. I need to see the encrypted version of the @inTargetPassword variable. But it's not working. It doesn't give me an error but gives me wrong data...
declare @thePassword as varbinary(128)
,@inTargetPassword as varchar(255)
,@pwd3 as varchar(255)
,@theUserId bigint
set @theUserId= 124564
set @inTargetPassword = 'test'
OPEN SYMMETRIC KEY Key1
DECRYPTION BY CERTIFICATE sqlSecurity;
Select @pwd3=EncryptByKey(Key_GUID('Key1')
, @inTargetPassword, 1, HashBytes('SHA1', CONVERT( varbinary, [UserObjectId])))
from table1 where UserObjectId= @theUserId
close symmetric key Key1
View 6 Replies
View Related