Greetings To all,
Can any one help me for restore database from Remote Server Backup.
I have tried the following ways.
Restore database DBname from disk='\server01sharenamedirnamex.bak'
i have got error like
Device error or device off-line. See the SQL Server error log for more details.
I have checked pathname and spelling everthing is perfect.
Thanks in advance,
Noorul
hi everyone,
i need to restore database to remote server using SSIS. Can anyone tell me how can i do this or point to some articles for this.
Suman
SumanShakya
Sorry if this is elementary, but I have searched and cannot find an answer.
I have a backup file of a sql server 2000 database. I want to restore it to a remote hosted sql server 2005.
Using sql server management studio, it seems to me that I cannot access the files stored local on my computer.
Does anybody have a solution?
What is the best way to deploy my backup file to the remote server?
Thanks for any suggestions!
I am working on a project for an SQL job. I am:
1.) Taking a database out of an availability group,
2.) Setting the recovery to simple,
3.) Shrinking the log file,
4.) Setting the recovery mode back to full,
5.) Then backing it up.
I need to restore the file to my secondary server with replace and non recovery mode. I am having trouble performing that call? I have the code to reestablish the database to the availability group if I can get the restore feature working.
FYI: I've posted this on a couple of forums and haven't gotten any response. I hope someone here can help since this is way past due.
First I'll give a little background on our situation.
Log Shipping and Replication are out, so I am scripting a backup locally, an xcopy to a remote box, and then a restore.
In the early stages of this, I'm trying to do 3 databases. 2 of them work fine alone. It's when I add the 3rd one that I have a problem. I noticed that in the 2nd stored procedure that I probably need to take out the WITH REPLACE if I'm dropping it beforehand as well. I don't have time to test it on this box until later tonight. I don't think that's the issue because it was doing the same thing before I added the drop. I'm overwriting the .txt file so I don't have the exact error that it's giving. I believe it's something similar to "Server: Msg 11, Level 16, State 1, Line 0 General network error. Check your network documentation." I believe it also said [SQLSTATE 42000].
Now for the code. Props to Tara and the code she's put online.
Any help would be appreciated and I'll be glad to help answer questions related to what I've got.
1st Step:
Agent Job scheduled to call stored procedure
EXEC sp_backup_user_dbs3
2nd Step (The code for that stored procedure is):
CREATE PROC sp_backup_user_dbs3
AS
SET nocount ON
DECLARE @Now CHAR(14) -- current date in the form of yyyymmddhhmmss
DECLARE @cmd SYSNAME -- stores the dynamically created DOS command
DECLARE @Result INT -- stores the result of the dir DOS command
DECLARE @RowCnt INT -- stores @@ROWCOUNT
DECLARE @DBName SYSNAME
DECLARE @filename VARCHAR(200) -- stores the path and file name of the BAK file
DECLARE @loglogical VARCHAR(1000)
DECLARE @datalogical VARCHAR(1000)
DECLARE @restoreData VARCHAR(255)
DECLARE @restoreLog VARCHAR(255)
DECLARE @backupFile VARCHAR(255)
DECLARE @physicalNameData VARCHAR(255)
DECLARE @physicalNameLog VARCHAR(255)
DECLARE @physicalNameDataStripped VARCHAR(255)
DECLARE @physicalNameLogStripped VARCHAR(255)
DECLARE @ExecStr NVARCHAR(4000)
DECLARE @strSQL VARCHAR(1000)
DECLARE @restoreToDataDir VARCHAR(255)
DECLARE @restoreToLogDir VARCHAR(255)
DECLARE @path VARCHAR(100)
SET @path = 'I:ackupMoveTo14'
--we need to delete all the old backup files from the I:ackupMoveTo14 folder
-- Build the del command
SELECT @cmd = 'del ' + @path + '*.BAK' + ' /Q /F'
--PRINT @cmd
EXEC master..xp_cmdshell @cmd,
NO_OUTPUT
CREATE TABLE #whichdatabase
(
dbname SYSNAME NOT NULL
)
INSERT
INTO #whichdatabase
(
dbname
)
SELECT [name]
FROM master.dbo.sysdatabases
WHERE [name] IN ( 'db1', 'db2')
ORDER BY [name]
-- Get the database to be backed up
SELECT TOP 1 @DBName = dbname
FROM #whichdatabase
SET @RowCnt = @@ROWCOUNT
-- Iterate throught the temp table until no more databases need to be backed up
WHILE @RowCnt <> 0 BEGIN SELECT @filename = @Path + '' + @DBName + '.BAK' BEGIN backup log @dbname
WITH truncate_only
END
-- Backup the database
BACKUP database @DBName TO disk = @filename
DELETE
FROM #whichdatabase
WHERE dbname = @DBName
-- Get the database to be backed up
SELECT TOP 1 @DBName = dbname
FROM #whichdatabase
SET @RowCnt = @@ROWCOUNT
-- Let the system rest for 5 seconds before starting on the next backup
WAITFOR delay '00:00:05'
END
DROP TABLE #whichdatabase
SET nocount OFF BEGIN
SET @cmd = ''
SET @cmd = 'xcopy I:ackupMoveTo14*.BAK \RemoteServer /C /Y' EXEC master.dbo.xp_cmdshell @cmd
END BEGIN
EXEC [RemoteServer].master..usp_restoreDbsFromDir2
END
RETURN 0 GO
3rd Step(the code for the usp_restoreDbsFromDir2 on the remote server):
CREATE PROCEDURE usp_restoreDbsFromDir2
AS
SET NOCOUNT ON
DECLARE @dbname varchar(255)
DECLARE @loglogical varchar(1000)
DECLARE @datalogical varchar(1000)
DECLARE @physicalName varchar(255)
DECLARE @physicalFileName varchar(255)
DECLARE @restoreData varchar(255)
DECLARE @restoreLog varchar(255)
DECLARE @backupDisk nvarchar (255)
DECLARE @physicalNameData varchar(255)
DECLARE @physicalNameLog varchar(255)
DECLARE @physicalNameDataStripped varchar(255)
DECLARE @physicalNameLogStripped nvarchar (255)
DECLARE @rowCnt int -- @@ROWCOUNT
DECLARE @ExecStr NVARCHAR(4000)
DECLARE @strSQL varchar(1000)
DECLARE @spidstr varchar(8000)
DECLARE @cmd sysname
DECLARE @bkpFile nvarchar(1000)
DECLARE @sql nvarchar(4000)
DECLARE @restoreDir varchar(255)
DECLARE @PhysicalDataPath varchar(255)
DECLARE @PhysicalLogPath varchar(255)
SET @restoreDir = 'F:MSSQLBACKUP'
-- Get files sorted by date
SET @cmd = 'dir ' + @restoreDir + '*.BAK /OD'
CREATE TABLE #Dir
(DirInfo VARCHAR(7000)
) -- Stores the dir results
CREATE TABLE #BackupFiles
(BackupDate varchar(10),
BackupFileName nvarchar(1000)
) -- Stores only the data we want from the dir
CREATE TABLE #RestoreFileListOnly
(
LogicalName nvarchar(128),
PhysicalName nvarchar(260),
Type char(1),
FileGroupName nvarchar(128),
[Size] numeric(20,0),
[MaxSize] numeric(20,0)
)
INSERT INTO #Dir
EXEC master.dbo.xp_cmdshell @cmd
INSERT INTO #BackupFiles
SELECT SUBSTRING(DirInfo, 1, 10), SUBSTRING(DirInfo, LEN(DirInfo) - PATINDEX('% %', REVERSE(DirInfo)) + 2, LEN(DirInfo))
FROM #Dir
WHERE ISDATE(SUBSTRING(DirInfo, 1, 10)) = 1 AND DirInfo NOT LIKE '%<DIR>%'
-- Get the newest file
SELECT TOP 1 @bkpFile = BackupFileName
FROM #BackupFiles
ORDER BY BackupDate DESC
SET @rowCnt = @@ROWCOUNT
-- Iterate throught the table until no more databases need to be backed up
WHILE @RowCnt <> 0
BEGIN
SET @cmd = @restoreDir + @bkpFile
INSERT INTO #RestoreFileListOnly
EXEC('RESTORE FILELISTONLY FROM DISK = ''' + @cmd + '''')
--get the dbname from the bkpFile name
--SET @strSQL = CHARINDEX('_db_', @bkpFile)
--SET @dbname = LEFT(@bkpFile, @strSQL - 1)
SET @strSQL = CHARINDEX('.bak', @bkpFile)
SET @dbname = LEFT(@bkpFile, @strSQL - 1)
--PRINT @dbname
--IF @@ROWCOUNT <> 2
-- RETURN 3
SET @backupDisk = @restoreDir + @bkpFile
SELECT @datalogical = LogicalName
FROM #RestoreFileListOnly
WHERE Type = 'D'
SELECT @loglogical = LogicalName
FROM #RestoreFileListOnly
WHERE Type = 'L'
SELECT @PhysicalDataPath = PhysicalName
FROM #RestoreFileListOnly
WHERE Type = 'D'
SELECT @PhysicalLogPath = PhysicalName
FROM #RestoreFileListOnly
WHERE Type = 'L'
SELECT @strSQL = 'alter database ' + @dbname + ' set offline with rollback immediate'
--alter database MyDatabase set offline with rollback immediate
--PRINT @strSQL
EXEC (@strSQL)
SELECT @strSQL = 'DROP database ' + @dbname
--alter database MyDatabase set offline with rollback immediate
--PRINT @strSQL
EXEC (@strSQL)
--restore the database
SELECT @strSQL = ''
SELECT @strSQL = @strSQL + 'RESTORE DATABASE ' + @dbname + CHAR(10)
SELECT @strSQL = @strSQL + 'FROM DISK = ''' + @backupDisk + '''' + CHAR(10)
SELECT @strSQL = @strSQL + 'WITH' + CHAR(10)
SELECT @strSQL = @strSQL + CHAR(9) + 'REPLACE'
SELECT @strSQL = @strSQL + ',' + CHAR(10)
SELECT @strSQL = @strSQL + CHAR(9) + 'MOVE '''+ @datalogical + ''''+ ' TO '''+ @PhysicalDataPath + ''''
SELECT @strSQL = @strSQL + ',' + CHAR(10)
SELECT @strSQL = @strSQL + CHAR(9) + 'MOVE ''' + @loglogical + '''' + ' TO '''+ @PhysicalLogPath + ''''
--PRINT @strSQL
EXEC (@strSQL)
SELECT @strSQL = 'alter database ' + @dbname + ' set online with rollback immediate'
--alter database MyDatabase set offline with rollback immediate
--PRINT @strSQL
EXEC (@strSQL)
BEGIN
-- Build the del command
SELECT @cmd = 'del ' + @restoreDir + '' + @bkpFile + ' /Q /F'
--PRINT @cmd
-- Delete the file
EXEC master..xp_cmdshell @cmd, NO_OUTPUT
END
--This is supposed to remove the row once done
DELETE FROM #BackupFiles
WHERE @bkpFile = BackupFileName
-- Get the database to be backed up
SELECT TOP 1 @bkpFile = BackupFileName
FROM #BackupFiles
ORDER BY BackupDate DESC
SET @rowCnt = @@ROWCOUNT
--Wait a couple of seconds before starting the next one
WAITFOR delay '00:00:30'
END
Drop TABLE #Dir
Drop TABLE #BackupFiles
Drop TABLE #RestoreFileListOnly
SET NOCOUNT OFF
RETURN 0
GO
Our production database is located on one server, and our test database resides on another. Often, we need to restore the production dump to the test database. But the Restore Device from Server window doesn`t seem to allow references to dump files on a different server. I`ve tried using the Add Backup Disk File window to point to the remote location; but it doesn`t seem to save the reference when I close the window.
I`m sure there`s a way to handle this without copying the dump file from one server to the other.
This would seem to be a common scenario. Thanks for any suggestions that others have found useful.
I want to restore a huge database into my workstation.The size of the backup file is more than 6 GB and I don't have enoughspace on my HD for both the database and the backup file.So I put the file in a shared folder on a pc connected through a switchto my pc.My wkst uses w2k pro sp4, the other PC win xp home SP1. MSDE 2000.The share is visible and RW for the administrator of my wkst.The 2 pc are in the same workgroup and are not part of a domain.I tried to restore using this code:RESTORE DATABASE MydbFROM DISK='\uncpath ofile.bak'WITH ...and get the error 3201 and in the log:"BackupDiskFile::OpenMedia: the backup peripheral'\uncpath ofile.bak' could not open. Error in O.S. = 5(AccessDenied.). " (I'm translating form italian)I read that the problem can arise from the fact that the restoration isexecuted by a sql server "user" that has not the same permissions as theadministrator. I tried to assign to the SQLSERVERAGENT service the useradministrator with no avail.And executing:xp_cmdshell 'dir \uncpath ofile.bak'gives the error "access denied".Is there a solution to this problem?Otherwise how can I restore a database whose backup has almost the samesize as the free space on the disk?thank youmaxx--NOSPAM: Rimuovere i trattini dallo username!Cut hyphens from my username!
View 2 Replies View RelatedHi guys, I don't own a copy of Enterprise Manager and I need to remotely restore a database on my local machine to my hosted machine, can you guys recommend an application that can do remote restores?
Or is there a way to convert a Database into a long set of Transact SQL statements that I can run on the remote server (ala MySQL's MySQLDump)?
Thanks
GP
- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?
- what is the impact of changing the remote query timeout (on the same page) from default value?
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
I am trying to add a linked server from a AMD x64 server (Windows 2003) with SQL Server 2005 64 bit to a Server running SQL 2000. These are not in the same domain.
I can create a linked server using the option "Be made using the login's current security context" but can not when trying to specify the security context, i.e. sa and the sa password. When I try I get the following message:
Msg 15185, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 98
There is no remote user 'sa' mapped to local user '(null)' from the remote server 'DTS_FSERVER'.
I have several other x64 server that I have no problem creating a linked server and specifying sa and the sa password.
The problem with using "the login's current security context" option is that I get an error when trying to run any Jobs against the linked server. The job fails withe the following error:
Executed as user: NT AUTHORITYSYSTEM. Access to the remote server is denied because no login-mapping exists. [SQLSTATE 42000] (Error 7416). The step failed.
I'm sure the two errors are related. Any ideas what is going on?
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies View Relatedi did "Linked server" between To Servers , and it's Working.
---------------------------
For Example :
Server 1 =S1.
Server = S2.
i create table in S1 : name = TblS1
i create same table in S2 : name TblS2
and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2
/****************** trigger Code ***************
CREATE TRIGGER dbo.tr_cpD
ON dbo.TblS1
AFTER INSERT
AS
BEGIN
SET NOCOUNT ON;
insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND
**************************************************
result is :
Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14
The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.
Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14
Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.
how i can execute this trigger
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies View RelatedHi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies View RelatedHiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies View RelatedWe have a database on a 2005 box, which we need to keep in sync with one on a 2014 box (until we can turn off the one on 2005). The 2005 database is still being updated with changes that must be applied to the 2014 database, given the nature of the data (medical documents) we need to ensure updates are applied to the 2014 database in very near real time (these changes are - for example - statuses, not the documents themselves).
Cunning plan #1, ulgy - not at all a fan of triggers - but use an after update trigger to run a sp on the remote box via a linked server in this format, with a SQL Server login for the linked server with permissions to EXEC the remote proc.
CREATE TRIGGER [dbo].[SourceUpdate] ON [dbo].[SourceTable]
AFTER UPDATE
AS
SET XACT_ABORT ON;
SET NOCOUNT ON;
IF UPDATE(ColumnName)
[Code] ....
However, while the sp can be run against the linked server as a standalone query OK, when running it in a trigger it's throwing
OLE DB provider "SQLNCLI" for linked server "WIBBLE" returned message "The transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Procedure TheAfterUpdateTrigger, Line 19
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "WIBBLE" was unable to begin a distributed transaction.
Whether it actually possible to call a proc on a remote box via a trigger and if so what additional hoops need to be jumped through (like I said, it'll run OK called via SSMS)?
I'm setting up a simple SSRS implementation for a non-profit organization, using two servers hosted at a data center. The first server has SQL Server Standard Edition and Reporting Services installed. I've designed and deployed a number of useful reports on this server.
I was hoping to isolate this first server by installing IIS and SSRS on the second server, have users browse from the Internet to that second server (over SSL, of course), and have all reports served up from databases (and, presumably, the report server database) on the first server.
During the installation of SSRS on the second server, however, I'm being prompted to specify the service account. According to the help text:
"Reporting Services. Service accounts are used to configure a report server database connection. Choose a domain user account if you want to connect to a report server database on a remote SQL Server instance. If you are using a local report server database, you can use a domain user account or Local System to run the service."
I believe I want to configure SSRS to connect to a report server database on a remote SQL Server instance; therefore, it appears that I need to enter a domain user account. The only problem is, neither server belongs to a domain; they are members of a simple two-server workgroup.
Does SSRS, configured to connect to a report server database on a remote SQL Server instance, require a domain? Does what I'm hoping to accomplish require a domain? Creating a two-server domain seems like overkill for this implementation, doesn't it?
I appreciate any comments and suggestions. Thanks!
Dear All,
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies View RelatedHow do I stop a remote query that INSERTS into a local table from being automatically "upgraded" to a distributed transaction?
I am using Windows 2000 server and SQL Server 2000 SP3a on both machines.
I am executing the following statement in Query analyzer.
INSERT MyLocalServer (col1)
EXECUTE MyRemoteServer.Master.dbo.sp_executesql
@RemoteQuery,
@ParameterDefinition,
@Paramter = 'somevalue'
@RemoteQuery consists of a SELECT four-table join, all tables are on the same linked server.
The Linked server has been set up on MyLocalServer using the "Microsoft OLE DB for SQL Server" provider. In the "Provider Options" for the linked server properties I checked "Non transacted updates" and "dynamic parameters". In the "Server Options" tab I have checked "RPC", "RPC Out", "Data Access".
The EXECUTE part of the query runs great (and returns the data very fast) by itself. But with the INSERT part, the query fails and returns the error:
"Server: Msg 7391, Level 16, State 1, Line 17
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]."
The two servers are seperated by firewalls, so I believe the reason the query is failing is that I haven't followed the procedures for setting up the ports etc described in one of the microsoft support articles: e.g.: 250367.
Configuring the ports involves too much company politics, and besides, for what this query does, it does not need the benefits of a distributed transaction.
How can I execute my query without SQL Server automatically trying to upgrade it to a distributed transaction?
More Info: I can execute the query as a straight INSERT/SELECT linked-server query and it does the INSERT on the local SQL Server just like I want it to, so I assume it is not trying to use distributed transactions; but it takes around 7 seconds to run even though the entire SELECT is executed on the linked server, whereas executing with sp_executesql takes only 1 second.
I thought selected "non-transacted updates" in the provider would solve this problem, but it did not.
Anyone know the answer?
I'm new to SQL. I have a scenario, Where customer want to move all the jobs from original SQL server to some remote SQL server and want to trigger jobs on remote server to do its work on original server.
View 4 Replies View RelatedIs it possible to view the Connection String information of a remote login/session? I want to know if the login is looking-up the database server via IP address, servername (NetBIOS name) or fully-qualified domain name (FQDN).
Using these DMVs I can get a lot of relevant information:
sys.dm_exec_sessions
Program Name (eg. Microsoft SQL Server Management Studio),
Client Interface Name (eg. .Net SqlClient Data Provider)
sys.dm_exec_connections
Net Transport (eg. TCP),
Client Net Address and TCP Port
but not how the server's IP address was resolved. Is the connection string ever sent by the client to the server, or just used for DNS lookup?
Hi,
I am developing a windows application that needs to communicate with a remote SQL server 2005 database. Server allows remote connections and MSDTC service also running. Do I need to run MSDTC service on the client machine where I use desktop application ? any ideas ? It's throwing some error like
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
But my SQL Server allows remote connection, and I am able to do a select statement.
But when I insert/update anything, it's throwing this error. I guess some problem with MSDCT. Anybody have any idea ?
Hi!!
I'moving my asp application to a new hosting server.
So when i tried the setup locally with the live DB & application in my test machine...
The DB access is denied when application tries to hit the DB.
DB is in seperate machine with SQL Server 2000 & application(ASP) is in Windows server 2003.....
Kindly help me with your suggestions....on what went wrong?
Hi all,
I am having seriuos problems getting VoIP traffic into and out of my network via the ISA server which we just newly installed.
My network topology is such that the phones i am using for the VoIP service, sitting inside my network and behind the ISA server, have to register to some remote proxy server outside my network and as soon as it registers i can begin using the service. The VoIP service is on the platform of SIP and uses udp ports 5060 and 8080.
I have permitted the necessary ports on the ISA server for the service being UDP port 5060 and 8080 but still cannot get my VoIp traffic through the server.
Please i need some help here as regards something i am supposed to do or something i am not doing right on the ISA server to permit my traffic.
I am a newbie to this Microsoft ISA server and i hope you all understand
Thanks in anticipation to your replies.
Leonard.
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View 2 Replies View Related