RESTORE LOG With Different Recovery Path
Nov 15, 2006
I'm trying to RESTORE LOG with a different recovery path. Is there a way to do this? I'm getting the below error. I know I could RESTORE from the beginning, but need to RESTORE the log file to the same database schema but different database and server. What steps do I need to do?
This backup set cannot be applied because it is on a recovery path that is inconsistent with the database. The recovery path is the sequence of data and log backups that have brought the database to a particular recovery point. Find a compatible backup to restore, or restore the rest of the database to match a recovery point within this backup set, which will restore the database to a different point in time. For more information about recovery paths, see SQL Server Books Online.
View 5 Replies
ADVERTISEMENT
May 5, 2015
in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
View 6 Replies
View Related
Sep 25, 2015
I want to redirect the logshipping primary backup folder to another drive, how to change the configurations steps to move the primary logship folder to another location within the same server!
View 2 Replies
View Related
May 10, 2007
I am having difficulty restoring a database (DB_1) consists of 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf,
Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf,
One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
Any help will be highly appreciated.
View 8 Replies
View Related
Feb 24, 2007
Hi,After just installing sql 2005 on our test machine, I am trying torestore a database using a backup file on the network. However, thespecify backup diagol box allows only for browsing to a file on thelocal machine - I find no way to type a UNC path to choose the backupfile from. I can do this in 2000, is it no longer an option to doitthrough the GUI or am I missing something?ThanksKR
View 1 Replies
View Related
Mar 11, 1999
Hi, I've to restore a bk into a new DB, because the old one has a lot of devices created on different places and phisical disks.
Im not sure to do that, cause Ive heard some problems with this action.
The old Db has 10 devices of data and 10 devices of log, and I want to create only one device of data (sum of all the data devices) and only one device of log (sum of all log devices)
Is it possible or not?
Tnx a lot!
View 2 Replies
View Related
Jul 5, 2007
Hi
Hopefully someone can help me.
I'm trying to restore my DB to a new server and also a new instance of SQL 2005 SP2+ hotfix KB934458.
I've successfully restored my MSDB database and everything seems to be working fine, but now when I'm trying to do a restore of my Database RMc to the attached SAN,
I'm getting the error:
System.Data.SqlClient.SqlError: The path 'H:' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo)
the H: is the Drive letter for my attached SAN.
The path I'm trying to give is H:\DBData for the MDF-file and the H:DBLog for the LDF-file.
I have the DB running on another server also with a SAN attached and there are no problems.
I also moved the MSDB to another drive on the SAN - a G-drive without any problems.
Is there someone who have a good idea?
TSloth :-)
View 3 Replies
View Related
May 8, 2007
I am having difficulty restoring a database (DB_1) with 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf,
Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf,
One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
Any help will be highly appreciated.
View 3 Replies
View Related
Aug 21, 2003
hello everybody
I have custom log shipping .
it run every 15 min
DB1 located on Server1
DB1 backup logs to server 2
DB2 located on server 3(300 km away from server1 and server 2)
Db2 restore logs from server 2
If server1 and server2 become unavailable
1.
Would enough login to server3
and
run
RESTORE DATABASE Db2
WITH RECOVERY
to bring db from read only to production mode up last restored log?
Thank you
Alex
View 1 Replies
View Related
Jul 29, 2015
In SQL Studio, I can go to the restore window and the click "verify backup media". This would check the restore plan listed in this window and check if some of the file are missed.Is there any way to reach this with TQSL? I know there is a "restore verify" command, but this will only verify one backup/file and not the complete restore path. I'm looking for a TSQL solution which is able to control that all necessary backup files are still present on the file System and not moved or deleted (e.g through cleanup task).
View 3 Replies
View Related
May 27, 2008
I am trying to restore database from network drive but
sql server 2005 express is giving error
"system.data.sqlclient.sqlErroratabase <dbname> cannot be opened due to inaccessible files
or insufficient memory or disk space (microsoft.sqlserver.express.smo)."
But when I restore database from "C:" or local drive it alows to do so.
Can anyone help.
View 5 Replies
View Related
Aug 1, 2001
Hello,
I have a file backup of a database from machine 1. I create an empty database with the same name on machine 2 and copied the backup file to machine 2. When I run a restore database, I get "Preceeding restore operation did not specify WITH NORECOVERY OR WITH STANDBY.Restart tehe restore sequence, specify the options for all but the final step. Restore failed"
Database : SQL 7.0 Trying to restore from the Enterprise manager
ANy clues as to what might be wrong.
Thanks, MMS
View 3 Replies
View Related
Jan 17, 2001
Hello all,
I just restored a SQL 7 db using the Enterprise Manager GUI interface. I
selected the "Leave database nonoperational, but able to restore additional transaction logs" option. I should not have selected this option as I do not have any transaction logs to apply.
Anyway, my question is... Is there a way to mark the database as opertational without running the restore again?
Thanks,
Corey
View 2 Replies
View Related
Nov 23, 2015
SQL Server 2008 R2
I don't see a "general discussion" thread and this is the closest i think.
I just have a general question: if my backup window is from 8am to 10am, and i do a restore within that backup window, what will happen? assuming we're talking only of a single database, ACME.
I'm comparing because with Oracle RMAN, it pukes when i do a restore while the backup is going on. it would complain of unable to find some archive logs.
View 2 Replies
View Related
Sep 20, 2007
I am trying to imitate a DR situation where the primary db is down and I need to recover the secondary db on another server. They are a log shipping pair and so to imitate a DR, I remove the log shipping in the primary server maintenance plan. Then I go to the secondary server and disable the log shipping jobs there and attempt to do the following
RESTORE DATABASE database_name WITH RECOVERY
but I can't get exclusive use because the database is in use. But I don't see any other users... am I wrong in thinking that the log shipping was completely deleted? Anything I can do to force exclusive access?
View 10 Replies
View Related
Jun 5, 2015
I am set up log shipping as backup and copy every one hour and restore every ( disconnect users and stand by) one hour on servers in same domain. Set-up completes successfully.Copy job works as expected. but the restore job fails intermittently to restore the .trn file saying ' could not apply log, data invalid' .
when i delete and copy the files for which restore failed manually using CTRL+C and CTRL+V across network and re run the restore job it does restore successfully . Through out the day i get about 5-6 problematic .trn files on secondary server which are copied from primary server and when restore fails i have to manually delete the log file which had problem restoring and then copy that file again using CTRL+C and CTRL+V then run the restore and it gets restored successfully.when running restore filelistonly on the logfile in issue on secondary server it gives below error
Cmd:
RESTORE verifyonly
FROM disk='G:xxxx_Copyxxx_20150604010501.trn'
Error:
Msg 3203, Level 16, State 1, Line 2
Read on "G:xxxxxxx_20150604010501.trn" failed: 13(The data is invalid.)
Msg 3013, Level 16, State 1, Line 2
VERIFY DATABASE is terminating abnormally.
and when i run restore filelistonly using netwok path then is seem s good and i can restore the logs as well
CMD:
RESTORE verifyonly
from disk='1.2.3.4xxx_Backupsxxx_20150604010501.trn'
Output: The backup set on file 1 is valid.I can assure there is no corruption on the log back up, no lsn mismatch, no log files missing.Same version and edition on both servers. Both servers are SQL server 2012 Enterprise edition on window server 2012
View 15 Replies
View Related
Oct 18, 2007
Given the follwoing scenario: You create a snapshot of a database with full recovery model, change it's recovery model to simple, then perform several updates/modifications on the database, before you finally (due to an error) restore the database from the snapshot.
Will the log chain be broken or not? The resteore sets the recovery model back to full, but I'm still a bit "curious" about the transaction logs.
View 7 Replies
View Related
Oct 23, 2015
I make two full backups on Oct 1 and Oct 10. I want to restore the server to a state in Oct 5. So I just do as follows:
Perform a transaction log backup on the server on Oct 23. I have never backup transaction log in the past. Restore the server with Oct 1 full backup with NORECOVERY option.Try to restore to the point at Oct 5 12:00, with the transaction log.
But the restore fails and SQL Server said the transaction log does not contain the point. The point is too early. Why? Also my .LDF file is about 13G, but the transaction log backup is only 200MB. Why?
View 12 Replies
View Related
Oct 21, 2015
how to restore database backups with different recovery fork. I have 1-full backup 2-diff backups and 10-tran backups. My prod database in mirror, so after error, switched to mirror with "allow_data_loss" option. And now I have full and diff backup with one recovery fork GUID and other backups with another GUID.So the question is, how to restore all this backups if in middle of restoration will be different recovery fork.Tryed to restore log backups with new fork guid and got error:This backup set cannot be applied because it is on a recovery path that is inconsistent with the database. The recovery path is the sequence of data and log backups that have brought the database to a particular recovery point. Find a compatible backup to restore, or restore the rest of the database to match a recovery point within this backup set, which will restore the database to a different point in time.
View 2 Replies
View Related
Sep 15, 2006
Hello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task manager on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task manager and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
View 8 Replies
View Related
Aug 19, 2015
We are using SQL Server 2012 for both production and development server. Currently, i have plan to transfer the full backup of SQL server database to the development server and then restore it on the development server for testing purpose, so we don't want to disturb on the production.
I have successfully backup the database from the production server and transfer to the development server. however, i encounter some difficulties when trying to do restore. my question is:
1. do i need to firstly create an empty database on the development server and then restore it into this empty database? say i create database call "Test2", then i perform a restore into this database.
2. currently, there is already an existing database being restored previously in the development server and this database is actually the older version of the backup that being restored by the previous engineer. should i remove this database first and restore a new one or both of the database can coexist as long as we put different name for the database?
View 6 Replies
View Related
Aug 4, 2015
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
View 7 Replies
View Related
May 26, 2008
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 3 Replies
View Related
Apr 16, 2008
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
Thank you!
Gary
View 3 Replies
View Related
Oct 4, 2007
After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
thanks
Leena
View 13 Replies
View Related
Aug 18, 2015
I'm working to test out a recovery scenario involving a SQL 2008 R2 2 node cluster. I want to restore it to a standalone server. The nodes are VMware VMs using physical RDM for the shared storage. Using Veeam as the backup tool. Veeam doesn't work with physical RDM so I'm dumping the databases (all Simple) elsewhere to be picked up and replicated with Veeam. No problem there. For my DR I have a vanilla 2008 R2 server being replicated so that I can use it as a base to restore SQL. So far the testing has worked ok. What I'm trying to learn is the best way to restore the cluster to the standalone server and have it look the same to the affected app servers.
The cluster has several instances. In my testing, I've recreated the instances, but I don't think they show up as they do on the cluster. For example, if the Windows server name is SQL01, and I install an instance called SQL-APP, SELECT @@servername while connected to the instance still shows SQL01 but in production it shows SQL-APP. What do I need to do to get everything to match up? I suspect that, while I haven't seen any problems, there could be something I'm missing that would manifest itself later.
Also, in testing, am I better off to delete the cluster server account from AD and join the domain with the DR server under the same name? (this is an isolated bubble so no impact on production).For the purpose of this scenario, assume all other required servers (DC, DNS, application, etc.) are present in the test environment as they would be in production and nothing requires resources outside the bubble. The only item affected is the SQL cluster.
View 7 Replies
View Related
Aug 17, 2015
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies
View Related
Dec 23, 2014
is bulk logged recovery model support point in time recovery
View 9 Replies
View Related
Sep 17, 2015
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies
View Related
Sep 19, 2015
We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies
View Related
Nov 1, 2015
We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
View 2 Replies
View Related
Sep 10, 2015
If you are doing a disaster recovery of an entire SQL 2005 cluster, can you just install SQL server and restore the system database to get the configuration?
View 4 Replies
View Related
Oct 29, 2015
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies
View Related
