Currently underway with migrating from SQL 2005 to SQL2012. I have loaded all of my SSRS reports into Visual Studio 2010 (SQL Server Data Tools) and they all appeared to upgrade fine. I have 150+ reports and I'm in the middle of recreating a tonne of Subscriptions.
However, I have 4 reports that run fine, execute nicely.... but as soon as I click on 'Subscriptions' I get the index bounds array error.
I could attempt to re-create them. It's only 4 reports after all. But it doesn't answer the question, why would the reports execute fine, but unable to create a subscription?
I got rid of the .rdl.data files, which apparently has been a successful fix for this problem in the past. Everything worked fine Thursday when I left (I was off Friday - Saturday), but today I get this error for all but one of the reports in the solution when I try to preview the report. BTW, the published stuff works fine. Thanks in advance for any help.
Index was outside the bounds of the array When working with a SQL Server 2005 database and ASP.NET, I get this error when trying to pull a small amount of data from the database, Any help would be great, thanks a lot I work for a large company, so I have to watch the code I release.
On the data tab in reporting services I have just named the stored procedure I wish to run. This Stored procedure expects a datetime parameter. When I select run in the data tab and enter the date (I have tried various different formats) the error "Index was outside the bounds of the array. (system data)". Does anyone know how this can be solved? it seems a simple issue but is turning into a pain to sort out.
When I go to SQL 2012 through SSMS 2005, I get the message Index outside the bounds of array. Will it fix if I install SSMS 2012? Do I need to remove SSMS 2005?
I need to setup log shipping from a 2008 Standard to a 2012 Standard server. I have not found any restrictions for this, however, when I want to connect to the 2012 server on the add secondary server page, I receive the following error:'Index was outside the bounds of the array. (Microsoft.SqlServer.Smo)'.
I am getting this error "Index was outside the bounds of the array. (Microsoft.SQLServer.Smo)"..I have downloaded a hotfix, but when I tried running the patch, I was told the expected version is 10.2.4000.0, I am running 10.0.1600.22.I can not locate the correct patch for my version.
Microsoft SQL Server Management Studio 10.0.1600.22 ((SQL_PreRelease).080709-1414 ) Microsoft Data Access Components (MDAC) 6.1.7601.17514 (win7sp1_rtm.101119-1850) Microsoft MSXML 3.0 6.0Â Microsoft Internet Explorer 9.11.9600.17041 Microsoft .NET Framework 2.0.50727.5485 Operating System 6.1.7601
I am getting an intermittent problem with executing queries on my workstation. Whenever I execute a couple of store procedures that return a large numbers of rows (200,000 to 500,000 rows) I receive an intermittent error message when running the same sp with the same parameters sometimes the procedure runs fine and returns the result, sometimes I get an error message
Error message is: Index was outside the bounds of the array.
Sometimes
Error message is: Internal connection fatal error.
Sometimes I get a datetime overflow
I also occasionally get these intermittent messages when I execute the native query that the SP wraps.
I have SSMS 2015 SP1 installed on my workstation, the servers are a range of server from 2008 R2 SP2 to 2014 SP1. It feels like a client problem as there are applications connecting to these servers and running the stored procedures without issue...
If I delete 5 or more columns from a table I get the error "Index was outside the bounds of the array", OK is the only response. I then have to close the report and then open it again.
Easy fix is don't delete more than 5 columns, but my template is setup with 15 columns as it's far quicker to delete them as it is to add them 1 by 1 each time. I've finally got around to looking for a hotfix or something similar but can find no mention of this exact error relating to table column deleting.
Anyone else experience this or know if there is a hotfix for it?
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type. What would I need to do to convert it to an Integer array? @OfficerIDs as varchar(200) Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs) Thanks
And a multivalued parameter that lets the user select which TypeIDs specifically he wants to see:
ParamID ParamValue 1 Q1 2 Q2 3 Q3 4 Q4
And in my Report, I have data showing up something like this:
CountofAllSales: 6 SumOfAllSales: 491.18 CountofCustomSales: (count of sales with type specified in parameter) SumOfCustomSales: (sum of sales with type specified in parameter)
The count and sum of custom sales should show -ONLY- the numbers from the TypeIDs selected in the multi-value parameter. But the CountAll and SumAll show everything, regardless. This is where I run into problems. I can't seem to find an "in" clause in the SSRS expressions. If the TypeID parameter was single value, I could write something like this
Expression for CountOfCustomSales: =SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value, 1, 0))
However, since its multi-valued, that won't work. You'd have to write something like: =SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value(0), 1, 0)) + SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value(1), 1, 0)) + .... SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value(length), 1, 0))
And obviously this doesn't work when you don't know exactly how many elements are going to be selected.
What would be ideal would be something like an "in" clause, but I can't find any such functionality or think how to write my own function: =SUM(iif(Fields!TypeID.Value in Parameters!TypeID.Values, 1, 0))
Short of modifying the StoredProc itself (and for me, that means red tape. :( :( ) can anyone think of a way to count/sum only the values specified in an MVP??
I am trying to create a "Loan Ledger Card" in SSRS which does the calculation up to report extracting time. I was able to create it on Excel (Click to download the Excel file) as we can calculate amounts for each installment based on Row and Column name. You can test it by putting any amount (Here it should be below 62000 as it is the total balance of loan) in "Amount Paid" yellow cell and see the effect.
I have made a selection in SQL (attached query and result in screenshot). It calculates the total paid amount by now on the first row, and all due amounts in other rows. Basically, It should first deduct the interest from first row, then principle, same process for second row and so on until it covers the whole paid amount.
SELECT '0' As RN ,memrepay.lnr ,'Repayment' AS Type ,SYSDATETIME() AS NOW ,SUM(memrepay.mprinc) As PrincPaid ,SUM(memrepay.mint) As IntPaid
[Code] .....
How can I do the similar calculation of Excel file in "SQL query" or "SSRS custom code"?
I try to Update a field of a table using this statementUPDATE Table SET field="Forget.......(long text)" WHERE id=1and I get this error The identifier that starts with 'Forget your bus excursions. Marta Patiño takes a trip out of this world at La Laguna's Science Museum. In April 2001, De' is too long. Maximum length is 128.What is wrong?
Hi, Its a common issue with reporting services, exporting a report with huge data to excel takes long time to render. Im facing the same issue. Trying to export a SSRS 2005 report to Excel 2003 takes very long time. Problem 1: The time taken to generate the excel report is pretty long (about 10 minutes) as the report runs to hundreds of pages. (The excel has about 30,000 rows and is ~15 MB) Problem 2: Once I open the excel and close it the size reduces to half of it. This is understood because of lot of characters values in the report that can be represented as single byte string, that€™s probably where Excel is making a difference. In Reporting Services it always write strings as 2-byte Unicode, but Excel will always try to compress to single byte when possible.
Am majorly concerned about the Problem 1. Any solutions would be highly appreciated. Thanks in advance.
hi i am getting an error with my code, it says 'value of type byte canot be converted to 1 dimensional array of byte' do you know why and how i can correct this error, the follwoing is my code. can anyone help me correct the error and let me know ow to solve it thanks for any help givenPublic Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequestDim myConnection As New Data.SqlClient.SqlConnection("ConnectionString") myConnection.Open() Dim sql As String = "Select Image_Content from ImageGallery where Img_Id=@ImageId"Dim cmd As New Data.SqlClient.SqlCommand(sql, myConnection)cmd.Parameters.Add("@imgID", Data.SqlDbType.Int).Value = context.Request.QueryString("id") cmd.Prepare()Dim dr As Data.SqlClient.SqlDataReader = cmd.ExecuteReader() dr.Read() context.Response.ContentType = dr("imgType").ToString()context.Response.BinaryWrite(CByte(dr("imgData"))) ----- this is the line with the error End Sub
Hi, I am trying to do a loop while a list of array is assigned ('CHP,CNH,COW') ... I am using comma seperator to get each list value ... but, it donest really do what I am trying to do ... pls help!!! How do I loop through each value and do the rest ...?? ===================================== DECLARE @ABBR AS NVARCHAR(50)SET @ABBR = 'CHP,CNH,COW' DECLARE @SEP AS NVARCHAR(5)SET @SEP = ',' WHILE patindex('%,' + @ABBR + ',%', @ABBR ) > 0 BEGIN -- do the rest END
I want to do a query on an SQL Server 2005 db and have the results returned into aarray or collection in vb.net... how do I do this? I know the basicconnection and stuff.. just not how to get the result to an array thanks!
Hi All, I have this code below:Dim a As Integer = 0 While a <= myArray.Length() Conn.Open() Dim UpdateCmd As New SqlClient.SqlCommand("Update email_addr SET category = 'Deleted' where HP = @hp", Conn) UpdateCmd.Parameters.Add("@hp", SqlDbType.VarChar, 50).Value = myArray(a) UpdateCmd.ExecuteNonQuery() a = a + 1 Conn.Close() End While BUt, When I run it, I receive error "Prepared statement '(@hp varchar(50))Update email_addr SET category = 'Deleted' wher' expects parameter @hp, which was not supplied. " DOes anyone have the solution??? Thanks....
Hello, how can I use an array in a WHERE clause? If I had an array saystring[] NamesArray = new string[] {"Tom", "***", "Harry"} How would I do this:string myquery = "SELET name, city, country FROM myTable WHERE name in NamesArray" Thanks in advance,Louis
Hi, i m pretty new to this forum and c#.net i m doin a project in c#.net I have four values in my datarow array for example DataRow[] cmb; cmb=dsResult.Tables[0].Select("Controls Like 'cmb%'");// Here i m getting four Rows
for(i=0;i<cmb.Length;i++) { cmb[i]=Session["cmb'+i].ToString().Trim()//Here i m getting error;Cannot implicitly convert type 'string' to 'System.Data.DataRow' }
How to assign my session values to them. I want to assign my value stored in the session variable to that array.Is there any way i can do it.Can i convert datarow array to string array! Please can any one help me.
I have two CheckBoxList controls. One CheckBoxList is a group of area codes as they apply to our customers, and the second CheckBoxList is a group of categories of those customers. The code below works fine with either CheckBoxList as a standalone (this code applies to the Area Codes selection), but what I need is the VB code to combine the choices a user makes in both CheckBoxLists. Is this where parameterized SQL comes into play? Or can I/should I use an array statement to combine both CheckBoxList choices? Sometimes a user will select nothing in one CBL and a few choices in the other, or vice versa, or a handful of choices in both CBLs, so that they might want only customers in, say two area codes and then only the selected categories of those area codes. Need help on this one, thanks...Protected Sub btn_CustomerSearchCombine_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btn_CustomerSearchCombine.Click Dim ACSelections As Boolean = False Dim ACItem As ListItem For Each ACItem In cbl_CustomerSearchAREA.Items If ACItem.Selected Then ACSelections = True End If Next If ACSelections = True Then Dim ACSqlString As String ACSqlString = "SELECT Customers.CustomerID, Customers.CustomerName, Customers.CategoryID, Customers.EstHours, Customers.Locality, Categories.Category FROM Customers INNER JOIN Categories ON Customers.CategoryID = Categories.CategoryID WHERE " For Each ACItem In cbl_CustomerSearchAREA.Items If ACItem.Selected Then ACSqlString &= "Customers.AreaCodeID = '" & ACItem.Value & "' OR " End If Next ACSqlString = Left(ACSqlString, Len(ACSqlString) - 4) ACSqlString &= "ORDER By Customers.CustomerName" sql_CustomerSearchGrid.SelectCommand = ACSqlString End IfEnd Sub
How can I read a query result set (which are of type VARCHAR) into an array? i.e the result set comprises of just one column and 5 rows and i want to save these into an array to easily extract each row whenever i want to. Hope I have conveyed my idea clearly.
I want to do something like the following but I get an error: Object reference not set to an instance of an object. SqlConnection sqlConnection = new SqlConnection("server=xxxxx"); SqlCommand [] cmd = new SqlCommand[3]; Object returnValue; cmd[0].CommandText = "DO QUERY"; cmd[1].CommandText = "DO QUERY"; cmd[2].CommandText = "DO QUERY"; cmd[3].CommandText = "DO QUERY"; } sqlConnection.Open();int i = 0;while(i<4){ cmd[i].CommandType = CommandType.Text; cmd[i].Connection = sqlConnection; cmd[i].ExecuteNonQuery(); returnValue[i] = cmd[i].ExecuteScalar();i++} sqlConnection.Close();How should I do the followingThanks
For a reporting product I created a sp which created a temp table and then using my function below built. problem is the product won't allow me to create a temp table. With what I have below anyone have any creative ideas I could use. In-line sql, subquery views?
select enc_id,labcnt,order_name,date_due
reate FUNCTION fn_GET_ARRAY_VALUE( @DELIMITER VARCHAR(100), @STRING VARCHAR(1000), @ARRAY_POSITION INT) RETURNS VARCHAR(8000) AS BEGIN DECLARE @CURRENT_POSITION INT DECLARE @VALUE VARCHAR(8000) SET @CURRENT_POSITION = 0
WHILE @CURRENT_POSITION<@ARRAY_POSITION AND CHARINDEX(@DELIMITER,@STRING,0)>0 BEGIN SET @STRING = SUBSTRING(@STRING, CHARINDEX(@DELIMITER, @STRING, 0) +LEN(@DELIMITER), LEN(@STRING) -CHARINDEX(@DELIMITER, @STRING, 0) + LEN(@DELIMITER) ) SET @CURRENT_POSITION = @CURRENT_POSITION + 1 END
IF CHARINDEX(@DELIMITER,@STRING,0)=0 SET @VALUE = @STRING ELSE SET @VALUE = SUBSTRING(@STRING, 0, CHARINDEX(@DELIMITER, @STRING, 0) )
My Issue is the next thing: I have a table filled with contracts I have Stoc that checks if contract has expired If I start the Stoc I must give it the contractnumber with it like: SP_expired 8
This works fine but now I want that the Stoc checks all the contracts by just starting the Stoc.
I don't really know how to do this, I have thinking about using an array. But don't have an idea where to start....
Please excuse me if this is the wrong forum. I hope your combined genius will be able to point me in the right direction.
I have an ASP page that accepts any SQL query. I want to create a table based on the result set so the number of columns can grow/shrink. But I don't know how. Can anyone help me?
My ASP Code shows how I create a table with only 8 fields.
<% Dim objConn dim SQLstmt Dim objRS Dim SQLqry Dim UID Dim RecordArray Dim I
hi guys im having some problems with arrays as parameter what i want to do is pass a array of comma separated values i.e 12,24,36 and use the in(@parameter) but it doesnt work
i've found some solutions, like ALTER PROCEDURE [dbo].[GetLawyers] ( @LawyerTypeIDs VARCHAR(100) AS
DECLARE @SQL VARCHAR(2000)
SET @SQL = 'SELECT * FROM [dbo].[TB_VALOR_BANCOS] WHERE [PARCELAS] IN (' + @LawyerTypeIDs + ')' EXECUTE (@SQL)
but in my case doesnt work.
here is a part of my code SELECT * FROM ( SELECT *, ROW_NUMBER() OVER (PARTITION BY cod_banco ORDER BY coeficiente asc) AS RecID FROM tb_valor_bancos where (1 = CASE WHEN @TABELA IS NULL THEN 1 ELSE CASE WHEN TABELA = @TABELA THEN 1 ELSE 0 END END ) AND (1 = CASE WHEN @PARCELAS IS NULL THEN 1 ELSE CASE WHEN PARCELAS in(@PARCELAS) THEN 1 ELSE 0 END END ) ...
i know there is a way to pass the array into a table but it doesnt work too
