Well, I finally got RS2005 installed on Vista, only problem is, now it won't run. I've installed SP2 (Ctp) and still no joy. It just errors when attempting to access the web service.
Here's the error:
w3wp!library!5!01/08/2007-20:36:56:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.Authentication.WindowsAuthentication.GetUserInfo(IIdentity& userIdentity, IntPtr& userId)
at Microsoft.ReportingServices.WebServer.WebServiceHelper.ConstructRSServiceObjectFromSecurityExtension()
at Microsoft.ReportingServices.WebServer.Global.ConstructRSServiceFromRequest()
at Microsoft.ReportingServices.WebServer.Global.get_Service()
at Microsoft.ReportingServices.WebServer.Global.ShouldRejectAntiDos()
at Microsoft.ReportingServices.WebServer.Global.Application_AuthenticateRequest(Object sender, EventArgs e)
I have a setup a reporting server that works perfectly when accessing it from the intranet. Now I need to give access to this report server over the intranet.
I'm stomped...
The network guys did create a secure access to my report server so I can access my server using : https://<MySecureRS>/reports
The issue I'm facing is that once I authenticated my self using https://<MySecureRS>/reports It shows the internal ip addres of my server in the browser.... http://<My internal IP Adress>/reports
How can I configure my server to stay on my secure address?
I have the following table:tblFriendsOwnerCode FriendCode7 107 1410 710 1210 1312 1013 1013 1814 718 13 I need a SP which return the following (im unsure about the best return datatype and the sql statement): I want return all friendcodes of user nr 7 (10 and 14)and I want to return all friendcodes of user 10 and 14 (7,12,13,7) WITHOUT user 7 (if possible WITHOUT the use of a temptable!)
I have a report that needs to show postal addresses. The address is broken down into several fields. The problem I have is some of the address parts are optional. If they are empty, I'm left with nasty gaps in the address. I'd really like next label to reclaim the space of any empty labels.
a quick example
A full address would look like this..
customer name address line 1 address line 2 town county post code
if address line 2 isnt given, I get:
customer name address line 1
town county post code
but I want:
customer name address line 1 town county post code
I installed RS2005(SP2) with a SQL2000(sp4) db. Both are on seperate Windoes 2003 servers. I configured the reports manager to connect to a different web site on the same server instead of default web site. There were no installation prohlems. The RS server is up and running , all the virtual directories setup etc. When I try to access the reports directory via: http://dev2/Reports or browse the reports virtual directory from IIS, I get a 401 access denied error. The RS log reads:
<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product> <Locale>en-US</Locale> <TimeZone>Eastern Daylight Time</TimeZone> <Path>D:ReportingServices2005MSSQL.1Reporting ServicesLogFilesReportServerWebApp__07_10_2007_11_29_21.log</Path> <SystemName>NWISTCST99</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName> <OSVersion>5.2.3790.131072</OSVersion> </Header> w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file. w3wp!ui!5!7/10/2007-11:29:30:: e ERROR: The request failed with HTTP status 401: Unauthorized. w3wp!ui!5!7/10/2007-11:29:31:: e ERROR: HTTP status code --> 500 -------Details-------- System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!5!7/10/2007-11:29:32:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
Please advise.
The RSweApplication.config in the ReportManager folder has the fully qualified URL to ReportServer<ReportServerUrl> and I have blanked out the <ReportServerVirtualDirectory>
Also the <UrlRoot> in rsreportserver.config in ReportServer folder points to the fully qualified URL to ReportServer.
I am not able to deploy report to report server, I have this error: The permissions granted to user <IUSR_MashineName> are insufficient for performing this operation.
How do I drill through to a report from a report that's in a different directory? In the designer I can only drill through to reports that are in that project. I'm sure that there is a simple solution (hopefully!).
I have roles set up for different companies. The role names are structured companyname_department, ex., CallawayContracting_SalesDepartment CallawayContracting_Administration FredsAutobody_PaintSales How would I search the roles and return only departments that belong to a certian company and also users that belong to a certian company. I appear to have gotten myself into quite a bind. Any help would be much appreciated! I will be certian to click best answer.
I'm pretty new to this so I'll explain as best I can.
I am building a small DB which will track attendance for employees based on a point system. I believe I'm almost there (with this piece) but am stuck.
The basic concept: 1. Collect all records from the attendance table for the previous 14 day period 2. sum the points column in the attendance table and group by UID, storing in a new table called TOTAL_POINTS ONLY for those UID's which have a value > 0 3. Perform a basic insert into statement on the attendance table for each UID matching those found in the previous TOTAL_POINTS table
Number 3 is where I'm failing and could really use some help.
My code thus far... -------------------------------
/*Declare local variables for current date and start date.*/ -- DECLARE @DateNow DATETIME DECLARE @StartDate DATETIME SET @DateNow=getdate() SET @StartDate = DATEADD(Day, -14, @DateNow) -- /*Create table to hold totals for future calculations*/ CREATE TABLE POINT_TOTALS (UID int, TOTAL float)
/*select ALL records from the table within the above defined date range and group them by UID tallying the score column*/ -- INSERT INTO POINT_TOTALS SELECT UID, SUM (POINTS) AS TOTAL_POINTS FROM attendance WHERE date >= @StartDate GROUP BY UID -- /*If the TOTAL_POINTS > 0 for the 14 day period, insert a record in to the attendance table which deducts .5 points for the UID in question*/
*** This is where I'm failing ***
--This was just to make sure I was returning the correct results to the POINTS_TOTAL table. SELECT UID FROM POINT_TOTALS WHERE TOTAL > 0
/*All I want to do now is for each of the UID's in the POINT_TOTALS table, I want to perform a basic insert on the ATTENDANCE table where the UID's in both match. I would think this to be fairly simple but I can't seem to figure it out. */
I have a table where i have 4 columns in it which i need to group together and then sum up a cost column also. I want to sum up the columns where i have a parent and and child and then i want to sum up the other column where i have only a child. Example of the data is below. I think i need to do this in a sub query
ID Ind Parent Child Cost P110041012705921.8000 W11004101270595.4500 A110041012705921.8000 B110041012705916.3500 R110041012705916.3500 B0100420043.3000 P0100420043.3000 W0100420021.6500
Hello !This is my table:Ordernr Date ArticleO1 1.1.05 22O2 2.2.05 33O3 5.5.05 22O4 2.2.05 33O7 8.8.05 55I need one result-row for each article with the newest Order(max(date)):article lastDate lastOrdernumber22 5.5.05 O333 2.2.05 O455 8.8.05 O7How can I get this ?I tried this:SELECT distinct article, max(date), max(ordernr)FROM tableGROUP BY articlearticle and max(date) is ok, but I am not sure that max(ordernr) andmax(date) comes from the same row.I think, I will need complex subqueries.Many thanksaaapaul
Hello !I habe 2 TablesTable1: OrdersFields: Ordernr, OpiecesTable2: CalloffsOrdernr, CpiecesIn Table1 ordernr is primary key.In Table2 the same ordernr can exist oftenMy problemIf the sum(Cpieces) < Opieces:I have to create a new virtual calloffwith Cpieces = opieces - sum(cpieces)Its too high for me.Please helpBest regardsaaapaul
HiI am trying to produce an update trigger. I understand the concept ofdelete and insert triggers without a problem. Unfortuantely, theupdate triggers do not have particularly simple documentation in BoL.So, can someone please explain to me, quite simply how I would producea trigger on the following:I have table 1 which we'll call simon. In here are various columns androws. I also have table 2, called simon_a, my audit table.Whenever anything is updated or deleted in simon, I want it sent tothe simon_a table. Delete, as above, is fine since it's conceptual buthelp me out on the update one. I cannot seem to figure out how to getthe information from the table before it's updated.As ever, champagne and beer for the successful answer.With thanksSimon
I have a table that stores billing rates for our employees by client.Each employee can have a different billing rate for each client for aspecified period. Here are the columns in the table.eid - Employee ID#cid - Client ID#startdt - start date of billing rateenddt - end date of billing ratebrate - billing rateI need to create a script that will verify that for a given eid, and cidthat either the startdt or enddt for one billing rate, the periods donot overlap.For example, I need to be able to detect overlaps such as this:eid cid startdt enddt brate001 001 1/1/2003 12/31/2003 $50001 001 11/01/2003 04/01/2004 $75*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
suppose I have the following table:CREATE TABLE (int level, color varchar, length int, width int, heightint)It has the following rows1, "RED", 8, 10, 122, NULL, NULL, NULL, 203, NULL, 9, 82, 254, "BLUE", NULL, 67, NULL5, "GRAY", NULL NULL, NULLI want to write a query that will return me a view collapsed from"bottom-to-top" in order of level (level 1 is top, level 5 is bottom)So I want a query that will returnGRAY, 9, 67, 25The principle is that looking from the bottom level up in each columnwe first see GRAY for color, 9 for length, 67 for width, 25 forheight. In other words, any non-NULL row in a lower level overridesthe value set at a higher level.Is this possible in SQL without using stored procedures?Thanks!- Robert
I Installed CE 3.1 months ago to play around with it to see how easy or difficult it would be to move from SQL Express to CE. Got it all to work with SQL Managment and VS 2005. Now, months later I am back to really upgrading my product to use CE. Oops, now we are on version 3.5. Decided to stay with 3.1 until I realized transact-sql command "TOP" is not supported in 3.1. So, onto the hours of research to do a simple upgrade. Here's where I stand:
1. Uninstalled CE 3.1. Installed CE 3.5. Oh, if only it were that easy. Visual Studio 2005 is still using the dll from 3.1 and still can only see reference to 3.1 in the GAC.
2. SQL Management Studio now cannot open the .sdf database.
3. There is no mention of using CE 3.5 with VS 2005, only VS 2008. Is VS 2008 a requirement to be able to work with .sdf file in VS? I remember I had to install "Microsoft SQL Server 2005 Compact Edition Tools for Visual Studio 2005" when I went through the first installation of CE. Is this now obsolete if I want to use 3.5? I don't even remember what its purpose was other than I needed it.
It seems there is and upgrade.exe file that need to be run command line to updgrade my .sdf file. Are you kidding?
Has anyone upgraded while still using VS 2005? Any advice is greatly appreciated.
Why have you made connecting to a sql server express database so difficult?
I have it working locally, but going to production has been nothing but a nightmare.
I can't even connect locally on the production box.
I am on a dedicated server and my login is an Admin on the box. I have just installed SQL Express + the fancy management interface.
I have made a copy of my database that I was connecting to dynamically (which was failing remotely) and I have attached it to the server. I have made myself a user of the database and granted my self evey permission available.
I have turned on impersonation in my web.config. The database knows it's me trying to connect and STILL denies me when I'm actually ON the production server. It is not even a remote connection problem.
How can I sit there an look at myself as a user of the database in the admin interface, yet I cannot connect via a web app. With SQL server 2000 and MSDE it was soooo simple....
Here is the error: Cannot open database requested in login 'TEST'. Login fails. Login failed for user 'DEDICATEDquick'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'TEST'. Login fails. Login failed for user 'DEDICATEDquick'.
I have a screen shot of the admin interface to prove I am a user.
This should be a 5 minute task that has eaten up days.
From this data I can see that serial number 0000-0000-0000-0006 Successfully completed part 1 and part 2 of the transaction, as did serial number 0000-0000-0000-0004.
Serial number 0000-0000-0000-0092 had trouble, it connected at 13:59:04 (tblremoteunitrequestID) but part 2 didnt complete, so it wasent saved in tblremoteunitrequests. The same happened at 12:15:22 but at 10:31:54 it was successful so it was saved.
I Only want to display the transactions that didnt complete, sounds easy huh?
CASE WHEN TBLRemoteUnitRequests.DateReceived BETWEEN DATEADD(SECOND,-1,TBLRemoteFeildUnitRequestID.RecordDate) AND DATEADD(SECOND,10,TBLRemoteFeildUnitRequestID.RecordDate)
THEN ' Ok'
ELSE ' Not ok'
END AS PROBLEM
FROM TBLRemoteFeildUnitRequestID LEFT OUTER JOIN TBLRemoteUnitRequests ON TBLRemoteFeildUnitRequestID.Serial = TBLRemoteUnitRequests.Serial WHERE TBLRemoteFeildUnitRequestID.RecordDate BETWEEN DATEADD(WEEK, - 2, GetDate()) AND GetDate()
ORDER BY RecordDate DESC
This kinda worked, but it caused records that satisfied the between condition to be displayed twice, once as "Ok" and once as "Not ok".
Heres a sample of the result I got:
Serial | RecordDate (1st part of transaction) | Status
0000-0000-0000-0006 2006-11-13 14:00:36.000 Ok (Duplicated) 0000-0000-0000-0006 2006-11-13 14:00:36.000 Not ok 0000-0000-0000-0004 2006-11-13 14:00:30.000 Not ok (Duplicated) 0000-0000-0000-0004 2006-11-13 14:00:30.000 Ok 0000-0000-0000-0092 2006-11-13 13:59:04.000 Not ok (Correct) (Not duplicated) 0000-0000-0000-0092 2006-11-13 12:15:22.000 Not ok (Correct) (Not Duplicated) 0000-0000-0000-0092 2006-11-13 10:31:54.000 Not ok (Duplicated) 0000-0000-0000-0092 2006-11-13 10:31:54.000 Ok 0000-0000-0000-0006 2006-11-13 10:00:29.000 Ok (Duplicated) 0000-0000-0000-0006 2006-11-13 10:00:29.000 Not ok
I have just about had enough, I have wasted an entire day on this
All of the subscription emails that go out has a "From" display name of "POP3", so when the receipients receive the email, they see "POP3" in the "From" field. I would like to change this so ill-informed users don't delete the emails thinking they're junk/virus email.
Of course if the email software being used by the receipients doesn't support displaying a "From" name, then only the actual email will show and, in that case, it will be perfectly fine.
I'm trying to account for the less-than-educated end-users with minimal literacy in computers.
I've got a RS2000 report from Analysis services 2000. This report is working fine but after the upgrade to SQL2K5, i'm having issues with changes to parameters.
Basically i'm passing DateQuarter, CustomersLevel as parameters to the following mdx script. I've tried to change mdx script in RS2005 but no luck yet. I don't much about the parameter level changes in sql2k5. So can anyone suggest what is wrong in the script.
Code Block RS2000
="with " & "member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)' " & "set [Rolling Quarters] as '" + Parameters!DateQuarter.value +".lag(4):" + Parameters!DateQuarter.value + "'" & "SELECT " & "{[Measures].[Ex Price]} ON COLUMNS , " & "filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows " & "FROM Sales " & "WHERE (" & Parameters!CustomersLevel.Value & ")"
RS2005
with member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)' set [Rolling Quarters] as '@DateQuarter' +'.lag(4):' + '@DateQuarter' SELECT {[Measures].[Ex Price]} ON COLUMNS , filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows FROM Sales WHERE STRTOSET(@CustomersLevel)
Can I author report projects in VS Studio 2008 that I deploy to a RS2005 Report Server?
Our development staff has upgraded to VS2008 for our DLLs, Web sites, and console apps... no problem there whatsoever. But we have SQL2005... obviously, since SQL2008 appears to be along way off.
So, it seems like an obvious question... although I'm dreading the response. My experience with getting RS2005 installed and configured correctly was simply horific. In fact, so bad, I'm considering dumping RS altogether and going with a more reliable 3rd party tool... MS has truly done everything in the power to botch this one or so it would seem.
I am working with an application in mssql 65.5, with sp4.
I have the database option 'truncatelog on checkpoint' set, there are no transaction log dumps taken at this time.
We plan now that y2k is over to upgrade to sp 5a. I am not not sure the new configuration parameter 'logLRU buffers'(I don't have the sp5a readme text with me now) in our situation.
Here is our situtation with the transaction logs: The log, mostly with month-end high actvity, fills up when long-running, high activity transactions are run. The log gets to 100% sometimes rather quickly and sometimes near that or above 80%easily. We check with dbcc open tran and there are no current transaction running. We expand the log just a little.
But it still shows 100@ used when we run dbcc sqlperf (logspace).
Here's the rub: when we try to dump the log, with wither or both back-to-back: dump tran abcdb with truncate_only and then dump tran with no_log still nothing happens.
Sometimes we stop and start the mssql server and that helps but not always and sometimes when we are really desperate we stop/start the NT server box(at off hours). Sometimes, the transaction log reduces to nearly 0% used when we run dbcc sqlperf (logspace) and sometimes not. So we run dump tran a couple of more times. We wait for several minutes usually to if the dump tan started and if it shows up under EM under curent activity
This is becoming very frustrating and dangerous as well.
1) has any one had similar experiences with mssql 6.5 sp4?
2) Can anyone advise what we can do to more easily to dump the transaction log? Are we doing any thing really wrong?
3) Would upgrading to sp 5a really help or should we just start planning upgrading to mssql 7.0?
Any suggestiosn you can furnish will be helpful. Thanks.
I'm writing a workflow management application for my work, and its somewhat complicated, here's a general idea of how it works:
- Anything that a company does is defined by a workflow. - A workflow consists of tasks. - Some tasks in a workflow can't be started until other tasks have been completed. If task A can't be started until tasks B and C are finished, then task A depends on B and C.
You might imagine that a bank has a workflow for handling a house loan. Before a bank could sign a contract with an applicant, they'd need proof of house ownership, but before they could get proof of house ownership they need an applicant's proof of identity like a driver's license or military ID.
Here's an oversimplified visual:
Each arrow points to its dependency. Each task can have multiple dependencies.
The setup above is represented in the database by a Tasks and a Dependencies table. Tasks has an ID field, and Dependencies has a TaskID and DependencyID field which are both foreign keys to Tasks.ID.
Code:
[Tasks] ID Status Name -- ------ ---- 1 Done Start Processing Loan Application 2 Done Photocopy applicant's driver's license 3 NotDone Photocopy proof of house ownership 4 NotDone Get a copy of applicant's W-2 forms 5 NotDone Perform credit check on applicant 6 NotDone Sign loan contract
Tasks has a many-to-many relationship with itself.
Here's the hard part: - A task can't be started until all of its dependencies have been completed. - after a task is completed (meanings its status is marked "done"), I need to return a list of all the new tasks that are ready to be started.
When TaskID 2 is marked "Done", then TaskID 4 is ready to begin; however, TaskID 5 is not ready to begin since it depends on 2 and 3, and 3 hasn't been completed yet.
The requirements of the query are very simple, but the implementation is difficult.
I'll post a prelimenary solution in the next post:
Hello,Here is a brief summary:Table 1 = All Accounts- with fields such as Customer ID and Account #Table 2 = Deposit Balance Table- with fields such as Account #, BalanceTable 3 = Loan Balance Table- with fields such as Account #, BalanceAll accounts are either deposit accounts or loan accounts. What I needto do is to gather information about total balances in both depositsand loans for each customer. I haven't been able to hit the right queryfor doing this. I can easily get information about one or the other,such as the following:SELECT All_Accounts.Customer_ID, COUNT (DISTINCT(Deposit_Balance_Table.Account_Number)), Sum(Deposit_Balance_Table.Balance)FROM Product_Table, Deposit_BalanceWHERE (Product_Table.Account_Number=Deposit_Balance.Acco unt_Number)GROUP BY Product_Table.Customer_ID ORDER BY 1Which will give me one row for each user, and show me the total numberof deposit accounts each customer has and a sum of the balances in eachof those accounts. I can make a similar query involving Loan Accounts.As soon as I try to draw both, however, I wind up below my depth.Something to do with the handedness of my joins, I believe. Often Iwill get one column of information (either deposits or loans), or thequery will fail because the join I'm attempting is invalid, etc. I needto take every row in the All_Accounts table, match each one to itsbalance in either the Deposit or Loan table, and then group them all bythe Customer ID and sum them, so that I can find out the totalrelationship balance per customer. Any help would be appreciated.
i have a table containing 24 columns, i would like to generate a new table by input the program gets from the user concurning of the columns he would like to see.
sound like an easy "select ? from table", but the thing is that how can the function know how to get a different number of variables, i mean, one time the user will want to see one column, and afterwards he will want to see 10 columns, is there a solution except generating 24 functions?.
i looked in all kinds of SQL tutorials and nothing came up so i came here, tnx for your help!.
I created a package from an Import Data Wizard, in 2000 you had the option to schedule that job, right then and there, but apparently that was too convenient, anyway... After creating my stored package within the database, I try to set up a job to run that package, it is pretty straightforward and I think it is going well until I try to execute the job and I get the following error.
Message Executed as user: servernamesystem. The package execution failed. The step failed.
So after some investigation, I believe it is a permissions issue, and at that time (default install) all services were running under "Local System". I had created the package with my domain account which is in the administrators group of the server. So, I added another service domain account in the administrators group and changed the services to run under that account. Again. No Dice, now I get this error...
Message Executed as user: domainservice_account. The package execution failed. The step failed.
Any help would be appreciated at this point in time.
