Hi,
When I execute the RSExecutionLog_Update.dtsx, I get an error saying "The task "Set Time period" cannot run on this edition of Integration Services. It requires higher level edition". I am using the Proffesional Edition of SQL2005 and the Integration Services Version is 9.00.1399.00. I have configured the target database RSExecutionLog correctly. Wat could be the problem?
TIA
I have installed the Report Execution Sample reports and with it came the RSExecutionLog_Update.dtsx and instructions to enable it in a SQL Agent job. I have followed the instructions, however, where do I set the PreCompile property to false? Is there a way to pull in a dtsx file into BIDS?
View 7 Replies View RelatedI have set up RSExecutionLog_Update using the following instruction:
http://technet.microsoft.com/en-us/library/ms161561.aspx
But when I execute this job, I get the following error:
Executed as user: SAVERSRPT1SYSTEM. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:29:36 AM Error: 2007-09-07 11:29:45.39 Code: 0xC020902A Source: Update Parameters Derived Column [979] Description: The "component "Derived Column" (979)" failed because truncation occurred, and the truncation row disposition on "output column "ParametersStr" (999)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component. End Error Error: 2007-09-07 11:29:45.39 Code: 0xC0047022 Source: Update Parameters DTS.Pipeline Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Derived Column" (979) failed with error code 0xC020902A. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to st... The package execution fa... The step failed.
Could you please let me know why this is happening and how to resolve it? Thank you.
-Tae Lee
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
I had encountered an error on SSIS its not allowing me to create any new packages. Below is the error message. Please do help be out.
This problem had occurred on my server machine
Error 1 Error loading Package.dtsx: Error loading value "<DTSroperty xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="CreationDate"
DTSataType="7">08.04.2008 4:39:55 PM</DTSroperty>" from node "DTSroperty".
c:documents and settingssrmohammedmy documentsvisual studio 2005projectsdictaphone_synchronizationdictaphone_synchronizationPackage.dtsx
I create a ssis package with have connection DB2 (I install ibm_data_server_client_win32_V97 in server) in sql2008 (run ok). I deployment in SQL 2012. When i run with Visual Studio or run direct package (*.dtsx). File run OK.
But, i run with job have a error as below.
Error: 2014-05-15 14:18:08.82 Code: 0xC0202009 Source: Package Connection manager "TESTING.cardpro1"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80004005 Description: "Unspecified error".
End Error
Error: 2014-05-15 14:18:08.82 Code: 0xC020801C Source: Xuat Report AUDCAR Cardpro-cp_audcar [2] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "TESTING.cardpro1" failed with error code 0xC0202009.
There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error
I run with user full permission. I run job success with dtxs no contain DB2 connection. Do you have a this case?
I will try to explain things the best I can.
When the data is transferred from source to destination (replace not append), the data in one field in one table is incorrect. Both source and destination tables have the same number of rows (8493). The ProductID field data range at the source is from 58958 to 73008. When the table is copied the ProductID field data runs from 1 to 8493.
What would cause this skewing of data?
This happens on brand new dtsx packages and this only happens in one field out of 5 different tables.
I am baffled. Any help is appreciated.
Thanks.
Andrew
Hi,
We have a DTSX in which parallel threads are processing ETL. There is a Final step in the DTS to do cleanup tasks. we are getting the following error after ETL completes. This is not consistently reproduced.
Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to complete login process due to delay in prelogin response". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: Timeout error [258].
Connection manager is set as Localhost.
Can somebody help us out here?
thanks
What do I need to stop this error?
Started: 5:05:48 PM
Error: 2014-08-21 17:05:50.64
Code: 0xC000F427
Source: File System Task
Description: To run a SSIS package outside of SQL Server Data Tools you must install File System Task of Integration Services or higher.
End Error
We are struggling to add an extra column to a Dtsx package. The package essentially compiles data into a table and then exports the data to a series of Spreadsheets. So far I have ended up doing the following: -
-Creating a new Folder for the Spreadsheet Templates, copying the existing spreadsheets into the new Folder and then added the new Column.
-Creating new Connection Managers in the Package to connect to these new templates.
-Adding the column to the various data flow tasks so that the new column is converted and then exported (data type is varchar(30), conversion type is Unicode text stream [DTNTEXT]).
Everything validates when we compile the dtx package. However when we run the package we are getting the following error: -
Started:Â 5:39:49 PM
Error: 2015-05-12 17:45:39.05
  Code: 0xC0202009
  Source: Data Flow Task Voluntary Excel [2379]
  Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
End Error
[Code] ....
When i run it from sql server data tools on the test box it runs fine. However when i run it from the ssisdb directly i get the below error.
reload table tablename1 from Excel file:Error: The "filetoload.Outputs[Excel Source Output].Columns[Product]" failed because truncation occurred, and the truncation row disposition on "filetoload.Outputs[Excel Source Output].Columns[Product]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
reload table t from Excel file:Error: There was an error with filetoload.Outputs[Excel Source Output].Columns[Product] on filetoload.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
I have a dtsx package that is calling another dtsx package, however, if the called upon dtsx package fails with errors or what not, then the calling package does not continue as well. Is there any way to override this such that if the called upon package fails, the downstream actions in that package can stop, but the calling packages downstream actions to continue?
View 3 Replies View RelatedHi people.
I just run a new instance of a SQL 2005 64x in my network.
For now all is working right. I have only one problem.
I create a procedure for BI that use DTSX.
Sometime if i try to use from Integration services, these job start and immediatly stop without no error.
Someone can help me ?
thank you in advance.
Hi all,
i have creatd a dtsx packages, i need to script on that packages.
is it possible to get a script on that corresponding packages..?
Can any one able to help me..?
Thanks
krishnakumar.C
I have been trying in vain to get a DTSX to return to a vb.net application that it has failed, all i get back is a
ReturnResult = success.
In the dtsx is the following;
Secquence
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
Inside the sequence Container
DataFlowTask
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
ExecuteSQLTask
- Transaction Option set to Required
- FailParentonFaluire set to True
- FailPackageonFaluire set to True
- MaximumErrorCount set to 0
I have run the package from my vb.net application and it runs fine, importing data from a file. I tried running it with a bogus file name that doesnt exsist and it still returned a ReturnResult = success. I need it to return a failed result on any errors, which is what i thought it would do as i have it sey to fail the package on errors throughout each task ... am i missing something ?
I am having more luck editing the dtsx files directly than using configs. Also for documentation purposes this would be helpful as I don't know enough about xml to find or build a tool to create a style sheet for me.
Thanks!
Ken
Hi everyone,
After a while I'm come back to SSIS but a drawback appears.
I€™ve copied from our server a folder which contains a few dtsx on my local folder and when I€™m going to open dtproj and then choose any of them:
Error 1 Error loading 'M_Hac_Modelo187.dtsx' : Error al recuperar un generador de clases COM para el componente con CLSID {E80FE1DB-D1AA-4D6B-BA7E-040D424A925C} debido al siguiente error: 8000401a.. c:ssishacienda_anualM_Hac_Modelo187.dtsx 1 1
..
..
..
(I think that is not necessary to translate into english due to simpleness of the message.)
What the hell is happening? I perfectly remember have been doing the same a month ago and I was able to open them without problems.
TIA
Hi!
I have a SSIS-package with Excel Connection Manager that fails on our x64-platform with error:
Error: 2006-12-08 06:46:23.77
Code: 0xC0202009
Source: dpd2_philips Connection manager "Excel Connection Manager"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2006-12-08 06:46:23.77
Code: 0xC020801C
Source: Copy Data from Blad1$ to dpd2 dbo philips Task Excel Source [107]
Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
End Error
It's works fine on my computer (x86) and if I start the package manually on the x64-server. But I noticed that it runs under 32bit (DTExecUI.exe *32 in taskmanager) when it's started manually.
Any idea? The server use dtexec.exe to start the packages. Maybe it runs under 64bit then?
I have spent the last couple of weeks going through about 15-20 different examples/tutorials on running DTS packages from inside a C# Windows app (and even asp.net). I must have a mental block, because I can't seem to make it click in my head. I have hundreds of DTS packages saved as .dtsx files. I can double click on them and run them perfectly. What I need to do is be able to run them conditionally from inside a windows app. Could anyone point me to a tutorial or example that could help me with this? I've even looked at some VB source to see if I could work it out, but I keep running up against a wall. I'd appreciate any help anyone can provide.
View 1 Replies View RelatedHello,
Please, help me.. I'm trying to execute a packge.dtsx that be save in folder. How can i do, to execute it? I create a job, but always give me errors..
I have some familiarity with DTS packages, and find them easy ( generally) to debug as you can run them step by step and simply find the offending step. when they fail they also put a message box with the error in the centre of the screen. My system has recently been updated and now uses DTSX packages. I can open and veiw these in visual studio, but i cannot run them one step at a time, and they dont give a nice error message when they fail. how do you debug a DTSX package, or at least make debugging it a little easier?
View 7 Replies View RelatedHi Champs
I want to implement a rutine that watches for specific files in a specified folder.
I've found the WMI sample "File Watcher Task" for SSIS and it looks fine.
My question is now: how shall I run this package; shall I start it at let it run forever?
And also how do I monitor that the package is running?
Many thanks
Rogvi
Ok, I'm actually adding a SSIS job to my job agent on my test SQL server. Noticed that when I go to my job agent --> add new job, under the steps option, I click new. this then takes me to the new job step window. When I select
Type as SQL Server Integrated Services, I then see some new tabs at the bottom of the form. Under package source I can select File System, SQL Server, or SSIS Package Store, then I have to select the location of the dtsx file.
So my question is, since I can select the actual file (package) I want to run from here, do I really have to import a package to the file system or MSDB under the SQL Integration Services on the server?
It appears to me that its kind of the same thing.
I'm new to this SSIS, SQL DB work, so I'm learning as I go. . . .
I can create and edit DTSX packages in Visual Studio 2005, but I can't execute them because the start button is grayed out. Can someone help?
I am able to run them using the execution utility, but that's a hassle.
Kathy
I created a dtsx with my user account and when I had imported it in SQL server
I get the following error when trying to execute:
Executed as user TESTGISSYSTEM Failed to decrypt protected XML node, Key not vallid for use in specified state.
Even when I remove the password for the dtsx I still get the same error.
I saw the reply's on this
Re: DTSX package will not run from SQL server agent
Thread Starter: jschroeder Started: 13 Aug 2007 10:08 PM Replies: 2
but it was no solution for my problem.
Thx
Hi,
I want to take the backup of all SSIS packages deployed in the SQL server. I need the backup in DTSX format, how should i do that. Please advice.
I understand that I can use dtutil to provide a password to encrypt the package. However, when I run the encrypted package, I need to provide the same password in order to run it. Is there a way that I can encrypt the package but allow anybody to run it without providing the password?
That is, I want the package to be encrypted so that nobody can load and modify the code in Visual Studio, but I want people to be able to execute it. Is there a way to do this? Similar to generating a exe file?
Hi all
This is the situation: I've a dtsx package wich creates a tab delimited txt file from a sql server 2005 databasetable. Now this all works just fine. But what I want to do is that the user can choose the destination path of that created txt-file. Right now I've declared the path when I created the flat file source.
On the net I found that a config file for a dts package (sql server 2000 - Dynamic Property Task) could do the trick...
Any help plz?
thx!
Dear all,
SSIS package created from the wizard couldn't be run from the visual studio editor? The run button is disabled. Is it not possible to run from inside editor as well?
Many thanks,
milan
Hi everyone,
I'm stuck with this silly thing but I haven't idea how to obtain the path for the log file specified in a SSIS package programatically.
This snippet of code works fine:
Dim pkg As New Microsoft.SqlServer.Dts.Runtime.Package
Dim app As New Microsoft.SqlServer.Dts.Runtime.Application
Dim pkgResults As DTSExecResult
pkgLocation = "C:Documents and Settings40990880Mis documentosVisual Studio 2005ProjectsProyecto de SSIS3Proyecto de SSIS3ProvaPrimera.dtsx"
pkg = app.LoadPackage(pkgLocation, Nothing)
pkgResults = pkg.Execute()
After execution I'd like to see the log file which is allocated in the same place than DTSX file. But how??
Using pkg.LogProviders.Item(0).Name appears description reference "SSIS log provider for Text files1" but no the name of the file or its path
Thanks in advance for any thought or advice,
First off, can you post .dtsx packages to the forum? I always end up cutting and pasting code, which is by is nature incomplete, as it generally has external dependencies (connections, variables).
Perhaps you cannot do so for security reasons?
Second, is there a good blog site that allows you to post .dtsx packages?
I'd rather post .dtsx links than cut and paste code (which half the time formats the code un-recognizably), or even worse, post package xml, which contains the layout information and possibly IL that makes it all but unreadable.
am trying to execute a dtsx package using xp_cmdshell
when testing, this works fine
DECLARE @returncode int
EXEC @returncode = master..xp_cmdshell 'dtexec /f "C:WorkWarehouseDev.ETLLoadGroup_Daily.dtsx"'
PRINT @returncode
then change it to look at the live one
DECLARE @returncode int
EXEC @returncode = master..xp_cmdshell 'dtexec /f "C:WorkWarehouse.ETLLoadGroup_Daily.dtsx"'
PRINT @returncode
doesnt work - it tries to execute the WarehouseDev version
any ideas ??
n.b. didnt know if this should be in this forum or a t-sql forum - apologies if its in wrong place !!
Hi,
I want to make an application that fills in the variables into a dtsx package (ssis).
I'm able to read the variables created in the package
Application app = new Application();
Package p = app.LoadPackage(pkg, null);
Connections myConns = p.Connections;
foreach( Variable v in p.Variables){
Console.WriteLine(v.Name);
Console.WriteLine(v.Value);
Console.WriteLine(v.Namespace);
Console.WriteLine("/////////////////////");
Console.WriteLine("/////////////////////");
}
i'm also able to add on
Variable myVar = p.Variables.Add("amyCustomVar", false, "User", "3")
When the applications is closed the package does not contain the variable. So this is all done in memory.
Is their a way to actually write the variable into the physical package.