hi
i have generated the rtf from html and this rtf contains an image and some text,the text is shown in reporting services but image is not shown.i am also using the code that is mentioned in this problem.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=738557&SiteID=1
can any body help me out that image is shown at their side in report server?
kindly help me out.
thanks in advance
I've implemented quite a number of CRI ( Custom Report Item ).
If I dropped it on a matrix so that I can have multiple CRI output images rendered it works well.
However, I'm trying it out on a table in which I've included a subreport. The subreport is a report that uses the CRI for one record.
I'm seeing only the last output image, the rest of the CRI output image are not shown, instead a red x image is show.
Anyone have any idea why this happens and how I can resolve the problem?
Using the matrix is not an acceptable workaround for me.
I have a matrix based report running, it shows a pivoted statistical value in the detail cells. Now I'd like 1 of 2 images to show instead, in those cells, based on the value of the statistic. Can this be done in a matrix?
View 1 Replies View RelatedHi All,
I want to get a average value for one of the column in my report.But when I view the reports those calculated columns are shown as NaN. Does anybody know why this happen?
Here is my query. Also query results pane status indicates cell is read only. I can not figure it out why...
Code Block
SELECT COUNT(Account.AccountId) AS NoOfAccounts, SUM(CertificateDeposit.Amount * CertificateDeposit.Csf / 12) AS TotalHelpAmount
FROM Account INNER JOIN
CertificateDeposit ON Account.Id = CertificateDeposit.AccountFK
Please can anyone help me?
hi,
i have a problem with a report. if i try it with vs2005 and the preview it works.
if i call the report from my web-application i get no error-message, but i only get my
headlines and no query-results.
i use reportingservices 2005, vs2005 and .net 1.1
my datasource is an olap-cube.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ReportExecution.ExecutionInfo ei = repExecution.LoadReport(ReportPath, historyID);
repExecution.SetExecutionParameters(convertToReportExecutionParameter(Parameters), "de-AT");
result = repExecution.Render(Format, devInfo, out extension, out mimeType, out encoding, out warnings, out streamIDs);
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
do you have any idea?
thank you
harald
I've built a report from a cube that I have had made. After selecting a few dimensions, the columns will be showing a drill down action related to different dates. Problem is, when you preview the report, the dates get alphabetized; they don't show up in an order like dates, days should.
ex: monday, friday, thursday, tuesday, wednesday
or april, august, july, june, may
How can this be changed, or is it related to the dimensions in the way they were made? Possibly something from the tables then? If more information is needed, please specify.
Im running Sql 2005 Developer Edition, with BIDS.
Dear all specialists,
I am encountering a situation that the report buider feature cannot be shown on other user login. Would you guide me to solve this issue ?
Thanks for your help
Gary Ho
I have a base folder (Report Folder A) which has several reports. One of these is a report that is simply a subreport of one of the others in the folder (it uses different default parameters, which is why it's necessary).
I then created another folder (Report Folder B) for users who only have access to some of the data in the reports...so they have browser access to Folder B but not Folder A. All of the reports for the users work except for the one that contains the subreport. When I run the report with a subreport I get the message: "Error: Subreport could not be shown". I'm guessing this is because the users don't have access to the base report. Does anyone have an idea of how to work around this without giving the users access to the base report (in Folder A)?
Thanks,
Richard
Hi everybody,
I'm quite new in Reporting Services and have the following problem:
I created a report which is getting its data from 5 different databases. For every database I made a subreport to get the data. In the preview and on the Reporting Server all the data is displayed find. Now I want to export the report to an Excel sheet which does work. But where the data from the subreports is to be shown it just says that subreports in table-cells has been ignored.
Another problem is that the way the report looks in the preview is fine - on the reporting server the columns are far to wide. I allready marked that the width should be fixed.
Some more information: in the main report some cells are merged. In these merged cells is the data from the subreport to be shown. The subreport displays the data in a table which has exact the same amount of colums (and the same size) the cells in the main report had before merging.
Thanks in advance,
Steph
Is there any way in which i can carry or retain the tooltip value which is shown on my report into Excel sheet ....
i mean when i export the report into Excel sheet, tooltip value is gone?? how can i retain the tooltip value when i export into excel ??
is it possible if so ...any hints??? thanks a lot in advance
Hi,
Is it possible to use a Web.Config value to set the path of an image control in the report.
I want an image control in the report and I want to set the path of the image in the web.config and assign it to the image.
How to acheive this..................
I am using the QRCode4CS class [URL] .... to generate QR codes.
I can use the following code to successfully return a bitmap image to a picturebox in a Windows Form Application.
public class CreateQRCodeClass
{
public static Image CreateQRCodeImage(string inputString)
{
QRCode4CS.QRCode qrcode = new QRCode4CS.QRCode(new QRCode4CS.Options(inputString));
qrcode.Make();
[Code] ....
In trying to adapt the same code (below) to display a QR code in an SSRS report I get the error "There is an error on line 1 of custom code: [BC30311] Value of type 'System.Drawing.Image' cannot be converted to '1-dimensional array of Byte.'
Here is the custom code I am using.
Public Function QRCode(ByVal RetailerId As String) as Byte()
Return QRCode4CSCreateQRCode.CreateQRCodeClass.CreateQRCodeImage(RetailerId)
End Function
Here is the revised custom assembly.
public class CreateQRCodeClass
{
public static byte[] CreateQRCodeImage(string inputString)
{
QRCode4CS.QRCode qrcode = new QRCode4CS.QRCode(new QRCode4CS.Options(inputString));
qrcode.Make();
Image canvas = new Bitmap(86, 86);
[Code] ....
What data type can I successfully return to SSRS to display the image?
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies View RelatedHi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
I am using the 3-tiered architecture design (presentation, business laws, and data acess layers). I am stuck on how to send the image the user selects in the upload file control to the BLL and then to the DAL because the DAL does all the inserts into the database. I would like to be able to check the file type in the BLL to make sure the file being uploaded is indeed a picture. Is there a way I can send the location of the file to the BLL, check the filetype, then upload the file and have the DAL insert the image into the database? I have seen examples where people use streams to upload the file directly from their presentation layer, but I would like to keep everything seperated in the three classes if possible. I also wasn't sure what variable type the image would be in the function in the BLL that receive the image from the PL. If there are any examples or tips anyone can give me that would be appreciated.
View 2 Replies View RelatedHay Friend's
Can u plese send me the way how to save image in sql server and display that images in datagrid or other control also like Image control or Image control Button?? Plese send the coding in C#.
Thank's
Amit
hi all,
i have created a table with image field in it. Now i just want to store a jpeg file in it but not finding any way to do so.
how can i store any image ? what are the steps???????
thanx in advance
Ok, the problem is that , i have a field called "Attach" in sql of type image, when selecting it , the field is getting data of type BYTE(). which am being unable to display them on an Image on the panel.
using the following vb.net code:
'Dim sel2 As String
'Dim myCom As SqlCommand
'Dim conn As New SqlConnection
'Dim drr As SqlDataReader
'Dim image As System.Drawing.Image
'sel2 = "select * from attach where att_desc = '" & DropDownList1.SelectedItem().Text & "' and doc_code = " & w_doc_code & " and subcode = " & w_doc_subcode & " and doc_num= " & w_doc_num & " "
'conn.ConnectionString = ("server=developer01;uid=sa;password=aims;database=DVPSOC;timeout=45")
'myCom = New SqlCommand(sel2, conn)
'conn.Open()
'drr = myCom.ExecuteReader()
'If drr.Read Then
' Me.ImageMap1.ImageUrl = drr.Item("attach")
'End If
'conn.Close()
Am getting an exeption on the following line Me.ImageMap1.ImageUrl = drr.Item("attach")
saying: Conversion from type 'Byte()' to type 'String' is not valid.
knowing that i tried converting using ToString but it's not getting any output then.
thanks for your help.
Hello,
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
Thanks
Does anyone know of any place I can find documentation on the meanings of the SQL Server state icons displayed in the MMC console for SQL Server 7.0? My server is showing the green running icon but also a vertical red squiggly line. I do not know what this red squiggly line means, and it concerns me. The databases all seem fine, and everything seems to be working, i just have this feeling like something bad is impending and I cannot find anything that tells me what it might be. Any help or suggestions would be greatly appreciated.
View 2 Replies View Related
i have inserted an image (company's logo) in the report and it doesn't show in print preview nor in print.
how do i fix it?
I have a simple report that has nothing but an image. The image is part of the project. The image displays in the VS 2005 dev environment when report is previewed. But when deployed and run on the report server website, it does not display. If the report is print previewed or exported to Excel, the image displays. I've set my browser to have the least security as possible but still to no avail (made the website trusted as well). The server is running SQL Server 2005 SP2. My browser is IE7. Can anyone please help? Thanks.
View 1 Replies View RelatedI embeded an image in my report.When i export it to PDF and Excel,it works fine but in HTML in does not show..
Can anyone tel me why..
Thanks,
Plengski
Hi,
I used some transparent png images in my reports, but it seems that they are rendered using a white background.
Why is this?
Best Regards.
Luis Simoes
Is there any way to change the image "Report is being generated" to something else or at least change the location of it. I have a report that is very long and our users have to scroll down to see that. They think the report is frozen when in all reality it is still generating. It is postioning in the center of the page and I want it to position at the top.
View 6 Replies View RelatedHi.
I used insert command to insert a image file to my SQL like
insert [ABC].[dbo].[Itemimage] value ('12345', 'c:Imagepicture1.jpg'). but when I use report
design to read this DB, I can't show this image in my report.
Does anybody can help me to find out my error?
Thanks
Hello Guys, I am trying to display image on a report. The image field is stored as a binary data in the database. I am using webservice to access the database and return datasets through which data on the report can be accessed. I saw that the xml returns binarystring value from the database. but when i try to display the image it does not show me anything except blank page. I checked the value of the binary data and it does not proceed with ox and tried appending 0x value but no luck. Guys please help me.
View 2 Replies View RelatedHello everyone,
I have a Reporting Services report which must show photographs stored in a SQL Server database. The trouble is that the photos just don't display. The report just shows the little red cross icon.
When I use MS-Access forms and reports it works fine. But I need this to work with Reporting Services!
Help please!
Jerome
When generating a SQL report, external images from a Sharepoint image library are not shown (red X).
An unattended execution account is set correctly, the image exists. I have tried with setting the UseSessionCookies to true/false. nothing seems to work.
Anyone any ideas wath else I can try?
We have restored a database on new server without keeping replication settings. Now while creating the publication no tables are shown in new publication wizard window. In fact we have hundred of tables in database and included in replication on source server from where backup was taken.
What may be the reason that tables are not appearing?
After finding out that SSRS doesn't directly support databound items in the header or footer, I found the workaround from Microsoft yesterday at http://msdn2.microsoft.com/en-us/library/ms159677.aspx. The problem is that their solution only works for the first page of the report, so it's basically useless! Because this is an image, it also means the workaround of using a parameter doesn't work, either.
Does anybody have any advice? Is there a solution to this problem?
Hello All,
Unfortunatelly, I am a very newbie when it comes to SQL Server Reporting Rervices
I'm currently working on a prototype for a GIS system. It is a web application where the user can select and scroll certain maps (will look like google maps).
The user can print the currently displayed view of the map (including some other data) via a report using the SQL Server Reporting Services infrastructure.
As far as I know, it is possible to add images on the report at built time (using url, database or file in project). Is it also possible to add an image at runtime by passing as parameter? My idea is that when the user wants to print the report, the url to the image of the map would be send to the server and the server would call the report, passing the url of the user. And the report is printed with the image referenced by that url?
I hope, that you understand somehow, what my problem is... I tried to search this forum, but couldn't find any ideas.
Best regards
Christian
Hi,
I'm having some troubles getting a chart drillthrough to work correctly in the MS Report Viewer. I'm using VB.NET 2.0 in a WebApplication.
Here's what happening:
I build the report with drillthrough functionnality in a chart. When I preview it, or look at it on the report web interface (http://localhost/Reports) it works perfectly. However, once I open it in my WebApplication with the MS' ReportViewer it starts to get ugly.
The report loads the first drillpath correctly. Once I click on a bar to drill to the next drillpath, the report seems to load the data, but the image doesn't represent that as it is the old one. I can tell that the correct data is loaded since the imagemap has changed when I mouseover the chart (links are not on bars, but where they are supposed to be on the second image).
In an attempt to be clearer, here's a step by step:
1- Create the report and the drillthrough functionnality.
2- Preview it in the report builder, works perfectly.
3- Test it in the report manager (http://localhost/Reports), works perfectly.
---
4- Load it in the MS' ReportViewer in my WebApplication, the first image in the drillpath loads correctly.
5- Click on the chart to get to the next drillpath, report reload with what seems to be the good data, but the image isn't refreshed.
So, is it possible to force an image to be reloaded with Reporting Services?
Thanks