Ragged Right Not Working Properly
Dec 25, 2007
Hi,
I am exporting a table to a fixed width flat file using "Ragged Right" format. Though i specify carriage return for the last column, the text file is not taking it up.
I am doing the following for connection
cmFlatFile.properties("Format").SetValue(cmFlatFile,"RaggedRight")
cmFlatFile.properties("RowDelimiter").SetValue(cmFlatFile,vbCrLf)
and while adding the column i am setting up the width as follows
vColumns = flatFileDestination.InputCollection(0).GetVirutalInput().VirtualInputColumnCollection
For cols = 0 to vColumns.Count -1
Dim col As IDTSConnectionManagerFlatFileColumn90 = ff.Columns.Add()
if cols = vColumns.Count - 1 Then
col.ColumnDelimiter = vbCrLf
end if
cols.ColumnType = "FixedWidth"
cols.Columnwidth = 20
......
Next cols
Still the rows are exported next to each other just like when we use FixedWidth.
View 4 Replies
ADVERTISEMENT
Jul 15, 2015
I have a disconnected utility dimension with the following data and a waterfall->subwaterfall hierarchy. I have ignore if same as parent set on sub water fall. The unary operator is assigned to the relevant level
WaterFall WaterFallUnary SubWaterFall SubWaterFallUnary
Opening ~ Opening ~
Price ~ Price ~
Total Composition ~ Composition L1 +
Total Composition ~ Composition L2 +
Total Composition ~ Composition L3 +
Total Composition ~ Composition L4 +
Total Composition ~ Composition L5 +
Closing ~ Closing ~
I'm using MDX to set values to the members
SCOPE(Measures.Waterfall,[Dim Waterfall].[Water Fall].&[Price]);
THIS=Measures.LowestPrice;
END SCOPE;
SCOPE(Measures.Waterfall,[Dim Waterfall].[Sub Water Fall].&[Composition L1]);
THIS=Measures.[Composition L1];
END SCOPE;
[Code] ....
But when i run a simple select query
SELECT
{[Measures].[Waterfall]} ON COLUMNS,
[Dim Waterfall].[Water Fall].[Water Fall] ON ROWS
FROM [GPA]
I only get a value for price. Total Composition is NULL. If I change my query to look at the subwaterfall level then I see values for composition L1->L5, so I know there are values there I was expecting the unary operator to aggregate my composition measures into Total Composition.
I should point out that every measure that's being assigned to my utility dim is calculated with in excess of a dozen or so steps and intermediate calcs, is this causing some kind of solve order issue?
I know that as a workaround i could probably do something like
SCOPE(Measures.Waterfall,[Dim Waterfall].[Water Fall].&[Total Composition]);Â Â Â Â
   THIS=SUM([Dim Waterfall].[Hierarchy].[Water Fall].&[Total Composition].Children,Measures.Waterfall);   Â
END SCOPE;
But that defeats the purpose of the unary operators
This is sql server 2014 multidimensional
View 5 Replies
View Related
Jan 17, 2007
Hello, i have something like this, i want the annoucements (status = 0) to be on top, then topics with (status = 1) below, then the rest of the topics.
So i tried:
SELECT forum_topics.id, forum_topics.status, forum_topics.username AS starter, forum_topics.subject, forum_topics.closed, forum_topics.answerpostid, forum_topics.views, forum_topics.answers, forum_topics.lastanswer, forum_topics.lastanswerid, forum_topics.created AS started, forum_answer.username, forum_answer.answer, forum_answer.created FROM forum_topics LEFT OUTER JOIN forum_answer ON forum_answer.id = forum_topics.lastanswerid WHERE (boardid = @ID OR boardid = 0) ORDER BY (status) ASC, (created) ASC
Problem is that they are not sorted diffrently, when i change the (created) ASC to (created) DESC i get the same result and the rows are not sorted, they only get sorted by status so i have status=0 at the top, then status=1 then the rest. How do i get them to be sorted first by status ASC then by created ASC/DESC?
Patrick
View 1 Replies
View Related
Apr 21, 2008
Hello friends, I have developed an ASP.NET 2.0 application. The problem is that the IIS server returns the next error:
SQL Server does not allow remote connections
Sometimes returns:
SQL Server does not exists.
My question is if there is any known bug with ASP.NET and SQL Server. My sql server have activated the Remote Connections (its working properly on other web page).
Its a problem of the number of connections??
Its a problem ofbad configuration??
Its a IIS problem??
Please bring me some help.
View 8 Replies
View Related
Oct 2, 2007
Hi,
I have several packages where I set up a SQL Server log provider. The packages are all called from jobs.
However, for some reason, only ONE of the packages is logging to the sysdtslog90 table in my specified database.
All of packages have the identical set up for the logging. Here are my settings under logging:
PROVIDERS AND LOGS:
Name: SSIS Log Provider for SQL Server (box is checked)
Configuration: ServerName.DBName (I use this same connection for all the packages)
DETAILS:
OnError is checked
CONTAINERS:
All items are checked
So what's going on here? I have successfully logged to this table using test cases in BIDS, and as I mentioned, ONE of the packages is actually logging to the table when it's called from the job.
Thanks
View 5 Replies
View Related
Oct 11, 2007
Hi all,
I use SqlHelper to connect to database. I need to set a timeout to execute some sp because I don´t want to wait for this sp if it make me wait a lot. So I set the Connection TimeOut every time I execute a sp. But this seems not working properly. I set this value to 5 and I execute a sp than runs in 15 but It waits for it.
Any idea
Best regards
www.ITCubo.net
View 1 Replies
View Related
Oct 4, 2004
We've altered an UPDATE trigger - now it doesn't work properly. When updating a record (via a web application) by clearing the value for a particlar column, we get error:
UPDATE failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.
Code = 800a0c93
Source = ADODB.Recordset
Description = Operation is not allowed in this context.
What the trigger does is prevent a zero-length string from being inserted into the database, which violates a check constraint, and instead inserts NULL. The web app - whose code we cannot modify - apparently does this. This was working fine, until we altered the trigger to add an additional column for update. Our SQL developer person has left, so us less knowledgable (about SQL) folks are trying to pick up the slack.
trigger code:
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
ALTER TRIGGER trigViaNetCardholderUpdateEmptyStrings
ON viewViaNetCardholder
INSTEAD OF UPDATE AS
UPDATE tblIDCross
SET
tblIDCross.chUSCId = CASE WHEN ins.chUSCId = '' THEN NULL ELSE ins.chUSCId END,
tblIDCross.chNineDigit = CASE WHEN ins.chNineDigit = '' THEN NULL ELSE ins.chNineDigit END,
tblIDCross.chPID = CASE WHEN ins.chPID = '' THEN NULL ELSE ins.chPID END,
tblIDCross.chEmployeeId = CASE WHEN ins.chEmployeeId = '' THEN NULL ELSE ins.chEmployeeId END,
tblIDCross.chAIMSNumber = CASE WHEN ins.chAIMSNumber = '' THEN NULL ELSE ins.chAIMSNumber END,
tblIDCross.intCustomerType = ins.intCustomerType
FROM INSERTED ins
WHERE tblIDCross.intUSCardId = ins.intUSCardId
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Please help...
View 1 Replies
View Related
Mar 28, 2008
Hi guys, I am importing a file using the Bulk Insert command, but the fieldterminator is not working for me.
My data:
“lname�, “fname�, “addr�, “phone�, “lang�
My command:
BULK INSERT dbo.zGE_RCF_POS_IMPORT FROM 'E:operationsdatafilesGEFTPINGE_RCF_POS_EXPORT.txt'
WITH (FIELDTERMINATOR = '","')
The quote are removed from every field except the first quote in front of lname and the trailing quote behind lang. I tried changing the command to:
BULK INSERT dbo.zGE_RCF_POS_IMPORT FROM 'E:operationsdatafilesGEFTPINGE_RCF_POS_EXPORT.txt'
WITH (FIELDTERMINATOR = '"')
But ran into field conversion problems, I also tried defining two fieldterminators got a syntax error. How can I get the desired results of removing all dbl quotes? Or do I have to write something to follow the Bulk Insert to remove the leading and trailing quotes?
View 4 Replies
View Related
Dec 3, 2005
Hi all...I have a stored proc that works fine except I can't get thepaging property to work in ASP. It seems that because I'm building theSQL withing the SP is causing the problem. If I don't build the SQL asa string paging works. In my ASP page, the pagecount property returns-1 for some reason.Here's the proc:SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOALTER Procedure LS_DisplayAllCategoriesBoolean@aSections varchar(255),@field varchar(255)Asdeclare @sql varchar(1000)SET NOCOUNT ONset @sql = 'SELECT DISTINCT ls_product_catalog.id,ls_product_catalog.ItemNumber, ls_product_catalog.Name,ls_product_catalog.[Descriptor], ls_product_catalog.Price,ls_product_catalog.Shade_Name, ls_product_catalog.Sale_Price,ls_product_catalog.Sale_DescFROM dbo.ls_brand INNER JOINdbo.ls_product_catalog ON dbo.ls_brand.nID =dbo.ls_product_catalog.CategoryID INNER JOINdbo.ls_product_category ON dbo.ls_product_catalog.id =dbo.ls_product_category.nProductIDWHERE dbo.ls_brand.bVisible = 1 anddbo.ls_product_category.nCategoryID in (Select IntValuefrom dbo.CsvToInt(''' + @aSections + ''') ) 'if @field = 'bNew'beginset @sql = @sql + ' AND bNew = 1 AND(dbo.ls_product_catalog.bGiftOnly is null ordbo.ls_product_catalog.bGiftOnly = 0)'set @sql = @sql + ' order byls_product_catalog.[Descriptor]'endif @field = 'bGift'beginset @sql = @sql + ' AND bGift = 1 or bGiftOnly =1'set @sql = @sql + ' order byls_product_catalog.[Descriptor]'endif @field = 'bGiftOnly'beginset @sql = @sql + ' AND bGiftOnly= 1'set @sql = @sql + ' order byls_product_catalog.[Descriptor]'endif @field = 'sale_price'beginset @sql = @sql + ' AND (sale_price is not null ORsale_desc is notnull)'set @sql = @sql + ' order by ls_product_catalog.Name'endexec(@sql)GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ON
View 1 Replies
View Related
May 25, 2008
Can someone please help me figure out why this trigger causes a "Timeout expired" error after the first try? What I'm trying to do is create an incrementing default value for the projectid field. I have a unique index on the field and for some reason, the INSERT statement won't run inside the TRY block, even though the WHILE loop creates a unique id. It's acting like the loop isn't incrementing, but the PRINT statements prove that the loop does work, but the INSERT statement doesn't work after a succesful first try (i.e. NEWPROJ-1 is inserted correctlly). Anyways, any help would be appreciated.
Code Snippet
GO
/****** Object: Trigger [Projects].[CreateID] Script Date: 05/25/2008 14:16:32 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [Projects].[CreateID]
ON [Projects].[tblProjects]
INSTEAD OF INSERT
AS
DECLARE @projectid varchar(25)
DECLARE @projectname varchar(100)
DECLARE @projectepskey int
DECLARE @maxcount int
SELECT @maxcount = 1
BEGIN
SET NOCOUNT ON;
SELECT @projectname = projectname
FROM inserted
SELECT @projectepskey = projectepskey
FROM inserted
SELECT projectid
FROM Projects.tblProjects
WHERE (projectid = 'NEWPROJ')
IF (@@RowCount = 0)
BEGIN
SELECT @projectid = 'NEWPROJ'
INSERT INTO Projects.tblProjects(projectepskey, projectid, projectname)
VALUES
(@projectepskey, @projectid, @projectname)
END
ELSE
BEGIN
WHILE @maxcount >= 1
BEGIN
BEGIN TRY
SELECT @projectid = 'NEWPROJ-' + CONVERT(varchar, @maxcount)
PRINT @projectid
INSERT INTO Projects.tblProjects(projectepskey, projectid, projectname)
VALUES
(@projectepskey, @projectid, @projectname)
BREAK
END TRY
BEGIN CATCH
SELECT @maxcount = @maxcount + 1
PRINT CONVERT(varchar, @maxcount)
CONTINUE
END CATCH;
END
END
END
View 4 Replies
View Related
Oct 21, 2015
I have a query taken from a Crystal Report, and I've been working to modify it for a slightly different purpose. Â The initial report was designed to take an input of an end date, go back to the last day of the previous month, get Actuals (sales totals), then add up all sales, costs, and purchases up to the end date, then display assorted data.
The new query needs to take a begin date and and end date, go back to the last day of the previous month for actuals, add all sales, costs, and purchases to those actuals until it gets to the begin date. Â That is now the new Actual, and we need to sum up all transactions from then to the end date.
My problem lies in the fact that I can't get the query to add up the numbers.
The query is here:
SELECT DailyReport.Store, DailyReport.Report_Date, sum(dailyreport_Detail.sales) as Sales, sum(dailyreport_detail.actual) as Actual, sum(dailyreport_detail.cost) as Cost, CompanyGroups.Category, DailyReport_Detail.Product, CompanyGroups.Retail_Inv
FROM (`DailyReport` `DailyReport`
INNER JOIN `DailyReport_Detail` `DailyReport_Detail` ON
[Code] ...
The return data looks like this:
3212,2015-07-31,126.35,1781.20,0.00,Fountain,Hot Dsp Bev,0
3212,2015-07-31,149.17,1311.94,0.00,Fountain,Cold Dsp Bev,0
3212,2015-07-31,666.63,4930.02,0.00,Food Service,My Deli,0
3212,2015-08-01,88.67,0.00,0.00,Fountain,Hot Dsp Bev,0
3212,2015-08-01,109.62,0.00,0.00,Fountain,Cold Dsp Bev,0
[Code] ....
I want it to look like this:
3212,2015-08-04,595.53,1311.94,400.76,Fountain,Cold Dsp Bev,0
3212,2015-08-04,485.85,1781.20,165.66,Fountain,Hot Dsp Bev,0
3212,2015-08-04,2762.05,4930.02,1388.00,Food Service,My Deli,0
View 8 Replies
View Related
May 30, 2006
Hi,
I have an SSIS Package to get the data from an Excel Source. For that I am using WMI Event Watcher to find when the file drops into a specific folder. It is working fine when I check any folders in the local machine.
We have a separate WebServer and Database Server for our application. The application is deployed in the Web server and the SSIS package is deployed in the Database server.
Since the files are dropped through application, it is dropped in the Webserver. I have mapped that drive in my Database Server and I am trying to link that folder in the SSIS package, but the event is not firing.
Please provide me some solution for this and revert for any clarifications.
Thanks & Regards,
Prakash Srinivasan
View 13 Replies
View Related
Sep 14, 2006
Here is the query:WHERE DATEPART(month, " + tableName + ".timestamp)>='" + startTextBox.Text + "' AND DATEPART(month, " + tableName + ".timestamp)<='" + endTextBox.Text + "'This is in a program using C# which is why it's in quotes and all that good stuff. The query itself works properly when startTextBox.Text = 8 and endTextBox.Text = 9. Itreturns results for both months 8 and 9. But when I want a result from a single month, say just 9... I put 9 in both text boxes and it ends up returning no results.Logic would tell me that say that both logics should come back TRUE but for some reason it's failing. Any ideas/suggestions? Thanks in advance!
View 2 Replies
View Related
Jan 7, 2008
Hello,
I have a SqlDataSource that is not doing my inserts properly. even if the user is logged in (UserName!=""), it always inserts a null in the UserName field.
SqlDataSource:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:imLLConnectionString %>" DeleteCommand="DELETE FROM [tblDiaryEntries] WHERE [DiaryEntryID] = @DiaryEntryID" InsertCommand="INSERT INTO [tblDiaryEntries] ([DiaryEntry], [Subject], [EntryDate], [UserName]) VALUES (@DiaryEntry, @Subject, @EntryDate, @UserName)" SelectCommand="SELECT [DiaryEntry], [Subject], [EntryDate], [DiaryEntryID], [UserName] FROM [tblDiaryEntries] WHERE [UserName]=@UserName" UpdateCommand="UPDATE [tblDiaryEntries] SET [DiaryEntry] = @DiaryEntry, [Subject] = @Subject, [EntryDate] = @EntryDate WHERE [DiaryEntryID] = @DiaryEntryID"> <DeleteParameters> <asp:Parameter Name="DiaryEntryID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="DiaryEntry" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="EntryDate" Type="String" /> <asp:Parameter Name="UserName" Type="String"/> <asp:Parameter Name="DiaryEntryID" Type="Int32" /> </UpdateParameters> <InsertParameters> <asp:Parameter Name="DiaryEntry" Type="String" /> <asp:Parameter Name="Subject" Type="String" /> <asp:Parameter Name="EntryDate" Type="String" /> <asp:Parameter Name="UserName" Type="String"/> </InsertParameters> </asp:SqlDataSource>
and from code behind, i do:
protected void Page_Load(object sender, EventArgs e) { if (!this.IsPostBack) { SqlDataSource1.SelectParameters.Add("UserName", this.User.Identity.Name); SqlDataSource1.InsertParameters.Add("UserName", this.User.Identity.Name); } }
Any ideas/suggestions? Thanks!
View 9 Replies
View Related
Oct 20, 2007
Hi,
I have an Execute Process Task that calls a batch file.
I need to pass in a date value to the batch file.
If I enter the value 20071018 in the "Arguments" section, it works fine.
However, I use the "Standard Input Variable", User::MyDate (which gets assigned in a previous Execute SQL Task), it bombs. The query I am using returns the date back in the format yyyymmdd. It gets assigned to a string variable, called MyDate.
e.g.)
SELECT TOP 1 CONVERT(VARCHAR, MyDate, 112) AS MyDate
FROM myTable
which result is mapped to User::MyDate
Is there any obvious reason why this doesn't work?
Thanks
View 3 Replies
View Related
Feb 21, 2008
Hi All
I have a parameter @User givning a dropdown list from a dataset:
SELECT FullName FROM tvf_GetListOfUsers ('LDAP://OU=Business
Users,OU=Users,OU=Production,DC=MRP,DC=NET,DC=NZ','Subtree')
ORDER BY FullName
The parameter is passed to a second dataset when the User is chosen:
SELECT GroupName FROM tvf_GetUserMembership('LDAP://cn=' + @User +
',ou=business users,ou=users,ou=production,DC=MRP,DC=NET,DC=NZ')
ORDER BY GroupName
This works fine in VS but when I deploy it only works the first time.
That is, I enter the username and run the report - it brings back the
desired results. But when I enter a different username it just redisplays the
old data from the first username I entered.
Any ideas?
Thanks
Pete
PS The funcions above called in the datasets are for querying Active
Directory but I think this is not the cause of the problem.
View 1 Replies
View Related
Oct 5, 2007
Hi,
I have a FOR EACH LOOP that loops through a bunch of folders in search of particular filename (including path). That part works fine.
Then, INSIDE the FOR EACH LOOP, I have a script task that evaluates the filename and grabs the date portion of the filename. That part works fine too.
Now, here's my dilemma. If the date portion of the file name IS GREATER THAN the the value of another date in a variable, I want it to load the file into a table using a data flow task.
So, this is what my package looks like:
[ FOR EACH LOOP (Script task --- evaluate the date using an expression (see below) ---> Data flow task) ]
My expression looks like this:
@[User::fileDate] > @[User::maxLoadDate]
You think that this would work, right??
However, after the VERY FIRST iteration of the loop, the script task turns green, then it goes right to the data flow task, which then says that the file name is "", and can't be loaded. (I'm not sure why this is occuring)
My question is, is my logic correct? Can I use an expression inside the for each loop and have it work?
View 1 Replies
View Related
Sep 28, 2007
hi,
i have a table having two column say columnA and columnB.columnA(text datatype) contains the data that is to written in a file and columnB(nvarchar datatype) contains the filepath.
but while configuring the export column tranformation, in the export column field i am getting the list of both the colums. here i am choosing columnA but in the file path name column i am not getiing the name of the column which contains the file name.
can anyone help me regarding how to configure the file path name column in export column transformation. from where we ll get the file path name.
in control flow, i have used only dataflow component and data flow tab i have used oledb source-->export column transformation-->oledb destination.
please help in configuring the export column transformation.
thanks a lot !!!!!!!!!!!!!!!!!!!!!!!
View 2 Replies
View Related
May 24, 2008
I am having a problem with this stored procedure. I'm using SQL Server 2005 Developer's edition and if I execute the procedure in a query window, I get no errors. Also, when the script runs from a website call there are no errors. The problem is that it doesn't return the information that is in the database. It is supposed to return the orders from Washington state between such and such dates. The orders are there in the database, so I think the where clause must be wrong.
Thanks for the help.
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[CommerceLibOrdersGetWashingtonState]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE [dbo].[CommerceLibOrdersGetWashingtonState]
(@ShippingStateProvince VARCHAR(50),
@ShippingCountry VARCHAR(50),
@StartDate smalldatetime,
@EndDate smalldatetime)
AS
SELECT OrderID,
DateCreated,
DateShipped,
Comments,
Status,
CustomerID,
AuthCode,
Reference,
ShippingCounty,
ShippingStateProvince,
ShippingCountry,
ShippingID,
TaxID,
ShippingAmount,
TaxAmount
FROM Orders
WHERE (DateCreated BETWEEN @StartDate AND @EndDate)
AND (ShippingStateProvince = @ShippingStateProvince)
AND (ShippingCountry = @ShippingCountry)
ORDER BY DateCreated DESC'
END
View 4 Replies
View Related
Aug 8, 2007
hi,
i have installed SQLEXPRESS (SQL Server 9.0.3042) on my windows ultimate laptop. of late am facing this issue of database. this database is from SQl 7.0 Desktop edition(the one that i use in my office machine with Xp SP2). As such it works fine in SQL 2000 server after attachment (for test).
i have run SQLEXPRESS as administrator to make/attach new database. i can attach the database easily and can even view tables and other stuffs inside database in administrator mode. the issue pops up when i run SQLEXPRESS in normal mode. when i try to open and view the same DB's content, error pops up stating
"The database XXX is not accessible. (Micorosoft.sqlserver.express.objectExplorer)"
i cannot access this DB via VB 6 form as it dosnt show up at all in database list when tried to connect via ADODC.
i want to make this DB accessibility as normal operation, not previliged only to administrator as application run on normal mode only.
the issue dosnt arise when i locally make a new database as it can be accessed when run in normal mode also. why does this happen to database that is attached and not to ones locally made.
pls guide me as i usually do my works at home and making whole database again will surely take lots of pain. why not it just attach then start working, not asking for preveliged mode.
thanks in adv
Nyaken
View 3 Replies
View Related
Dec 11, 2007
I'm a SQL newbie, and I'm trying to write a report that returns records based on a beginning and end date that the user supplies. But when I run the query and supply the dates (begin 11/29/2007 / end 11/30/2007, for example), I'm only getting back one record, when there should be at least 3. It appears that my query is ignoring the =, and only returning those records that have a date > or <, not <= or >=.
I was told that it's possible that the time needs to be converted to UTC as well, but I'm not sure how to do that ( I tried, but I really don't know what I'm doing so I commented it out)... Can someone offer some guidance on how to get all the records to show up? I've pasted my query below, thanks in advance!
SELECT FilteredContact.fullname, FilteredContact.new_memberleadsourcename, FilteredContact.new_prospectforclubname, FilteredContact.owneridname,
FilteredContact.new_referred_by, convert(varchar(10),FilteredContact.createdon,101) as Date--, SELECT GETDATE(FilteredContact.createdon) AS CurrentTime, GETUTCDATE(FilteredContact.createdon) AS UTCTime
FROM FilteredContact JOIN filteredOpportunity on
FilteredOpportunity.contactid = Filteredcontact.contactid
where filteredopportunity.new_opportunitytype = 1 and (FilteredContact.createdon >= '11/29/2007') and (FilteredContact.createdon <= '11/30/2007')
View 3 Replies
View Related
Feb 9, 2006
Hi all,
Drill through bar charts work great in the report designer preview, but as soon as I deploy the report, and view the report in a webpage, drill through does not work smoothly.
I have to move the mouse around to be able to find a place on the bar to click through to the next report. Sometimes, I am able to click on the bar to go to next report, but then sometimes I have to click on the label, and other times somewhere in the vicinity of the label.
Any help will be much appreciated.
Thanks,
Kanwal
View 1 Replies
View Related
Jul 29, 2015
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
View 9 Replies
View Related
Aug 27, 2007
For some reason, when I try to use the Flat File Source and set the record type to Ragged Right it does not seem to recognize 'short' records. It seems to be confused by the CRLF set delimiters and not recognize these in 'some' records. The input does not seem consistent. What am I missing?
View 1 Replies
View Related
Aug 9, 2007
I have tab delimited text files which may have optional fields (meaning they can be not present at all) to the right of the required fields that I care about. It would appear that using a Flat File Connection with Delimited Format (tab) set will choke if it is initially configured with a file that has something like:
data data data
and it then encounters
data data data optionaldata
It chokes. I know this could be parsed line by line, but that seems silly. It seems like there should be a way to ignore columns beyond a certain point (e.g. Format "Delimited Ragged Right").
Is there some way to do this with a directly with a flat file connection?
Thanks,
--Andrew
View 1 Replies
View Related
Jul 27, 2007
I'm loading a fact table that has several geographic attributes - some are at the state level, some are at the county level, and then some are drilled farther in that that. I understand the basic concept of the dimension with the ragged hierarchy, but unsure of how to load to the fact table using lookups based on these geographic units. For example, if my geographic dimension contains 200 records for the state of Wyoming, basically a record for each fine-grain place (i.e. city/town), then how do I go about doing a county lookup. Wyoming only has 23 counties, but because of the repetitive nature of the dimension attributes that are not at the finest grain, I'll get more records in the lookup than I need. This activity repeats of course while I move up the geographic scale to state, then country. How do I configure/fill my dimension to handle these differing scales of data?
View 2 Replies
View Related
Oct 30, 2007
Iam trying to load a RR Flat File(Ragged Right) into SQL Server DB Destination.
The file feeds the data into two tables and the logic looks like this..
If Position 30 = ''
Record Set goes into Table 1
Else
Record Set goes into Table 2
I have no clue where to start with my limited SSIS Exposure.. Any Ideas as to what i shud be starting with (Transformations)??
Thanks in Advance.
View 1 Replies
View Related
Sep 14, 2007
how do I make the output columns padded with extra space ? I intentionally set my output width larger than the input width, but the generated file is still jamming all the columns next to each other
View 2 Replies
View Related
Aug 13, 2015
Any working example of what a ragged hierarchy should look like for the unary and custom rollup calcs to work?
I have a parent-child hierarchy that works as expected but can't manage to get the same with a flattened ragged hierarchy. Parents disappear if any of the children aren't in the fact table (even though the children are set to '~' and the parent has its own custom rollup calc).
Do I need to replicate the unary and measure formula all the way to the end in the same way i do the member name/value (so i can set ignore if same as parent)? Setting unary to null seems to work when the key doesnt exist in the fact table but the default behaviour for null is '+' so i end up getting wrong results if the key does exist!
Repro:
In words
I have an EAV style fact table. The measure name is defined in a 'dim measure' table. Some measures exist in the fact, some are manufactured using Unary ops or custom rollup formulas.
Here's a diagram of the hierarchy
I want to recreate the functionality as a flattened hierarchy (the number of levels is fixed), but can't seem to do it... Here's what I've gotten for the same hierarchy created using the two different approaches
Below are queries to recreate the tables from adventureworksdw2014. The parent child hierarchy is set up the standard way... measureparentkey is parent. set name, unary and formula as expected. Set NonLeafDataHidden for the parent attribute. I've tried various combinations for the ragged hierarchy but none work 100% of the time. I want to have a user defined hierarchy for the performance benefits.
--Fact view
CREATE View dbo.FactSales
AS
select fis.ProductKey
, fis.OrderDateKey
, 1 AS MeasureKey -- salesAmount
, fis.SalesAmount AS MeasureValue
[Code] .....
View 3 Replies
View Related
May 19, 2015
I writing the data from sql table to flat file destination. I want to insert the record count in the first line of the destination file.
Record count must preceed 00.EX . Writing 4500 records from database should show 004500 in the first line of flat file.
I have an execute task to store the count in a variable now.
View 0 Replies
View Related
May 29, 2006
I€™m using the ImportExport wizard to export the top 5 lines from a MS Sql table into a fixed format (€œragged€?) file. But I want the first record to contain the column names of the exported fields so I selected the €œColumn names in the first data row€? option of the €œChoose a Destination€? box. When I run the Package I get:
>>>
· Information 0x402090dc: Data Flow Task: The processing of file "C:arkingdogExportWithheader.txt" has started (SQL Server Import and Export Wizard)
· Error 0xc0202095: Data Flow Task: Failed to write out column name for column "CustomerID".
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - ExportWithheader_txt" (49) failed the pre-execute phase and returned error code 0xC0202095.
(SQL Server Import and Export Wizard)
>>>
When I de-select the €œColumn names€? option, the package works fine. Other than manually, how can I et the column names in output file?
TIA,
Barkingdog
View 5 Replies
View Related
Apr 23, 2001
how do i use "sp_attach_db" properly so that i can make a new database with only the .mdf file?
View 2 Replies
View Related
