I want to create one complex query with Date time field,  my query is I want a grouping   between the time range
Â
EX:
Â
13/09/2007 1:00:00 PM    to  14/09/2007 4:00:00 AM    will be as Day1
14/09/2007 1:00:00 PM    to  15/09/2007 4:00:00 AM    Will be as Day2
''
''
''
This way the end date for the period will be 13/10/2007 4:00:00Â as Day 30
pavan
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View RelatedHi there
I am using SQL2005 and would like to check the whether the time is within the valid range for instance:
Data to check: 2:15AM
Range is between: 01:00AM till 06:59AM, 07:00AM till 02:00 PM
I can use the datepart for hh but that is not what I want. I want to have a full time: HH:MM cause sometimes if you do datepart by hour and if you apply into the above excample will be:
2 BETWEEN 1 AND 6 (this is ok)
2 BETWEEN 7 AND 2 (this is not ok)
Any idea?
Good morning...
I begin with SQL, I would like to add a field that will be date like 21/01/2000.
Actually i find just "datetime" format but give me the format 21/01/2000 01:01:20.
How to do for having date and time in two different field.
Sorry for my english....
Cordially
A newbie
Hello,I have a table that lists a number of available time slots for a party venue. I want a user to select a particular time slot and have the query show results for that time slot plus two time slots before and two time slots after the user's selection. If the user selects a time slot that is the first of the day, I still want that user to be shown 5 results including the one he selected. The same goes for the last time slot of the day. Can anyone help me with the SQL statement?
Thank you very much in advance!
Mark
Hi there,
With a DateStamp field
Im trying to group by Day Name
and also group it By Time ranges
i.e. Morning 00:00 to 11:59
Afternoon 12:00 to 17:59
Evening 18:00 to 23.59
I can do the group By Day Name ok
Like Below
Code:
SELECT COUNT(ISNULL(createdDate, 1)) AS DayCount, ISNULL(DATENAME(dw, createdDate), 'No Date Set') AS DayOftheWeek
FROM dbo.MyTable
GROUP BY ISNULL(DATENAME(dw, createdDate), 'No Date Set')
its just the grouping by time ranges im having trouble with..
Code:
M | T | W | Th | F | S | Su
Morning ||
Afternoon ||
Evening ||
Thanks for any help ..
I have a query to determine the time range like following
SET @StartDate = CAST (DATEDIFF(d, 0, DATEADD(d, 1 - day(getdate()), getdate()))as datetime)
SET @EndDate = GetDate()
What time range that query set ??
Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
Hi everyone, this is the exception:
System.Data.SqlClient.SqlException: The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value
Here's my code!
... 'datagrid code
cmdSelect.CommandText = "SELECT * FROM [Table] WHERE [Date and Time] > '" & Me.tbFromDate.Text & "' AND [Date and Time] < '" & Me.tbToDate.Text & "'"
...
Me.tbFromDate.Text and Me.tbFromDate.text look like this: 27/11/2003 1:11:43 PM
The SQL Query works fine - just that this code gives a runtime error.
Can someone help?? I'm guessing I have to do somekind of conversion!!
Andrew
I have a date/time value (dd/MM/yyyy HH:mm:ss) stored in a field as part of each record in a dataset.
I would like to achieve the following via a single T-SQL query if possible (efficiency is not an issue as the dataset is small)
On query run;
Check if any records in the dataset are within 10 minutes + or - of the current system time (using the date/time value referenced above)
if none
Load the first record
We have account numbers that are string values, looking like: "01.02.02.00.0040.000.000".
We need to parse individual segments and pull out a range of values treating the segment like an integer. For example we would like all accounts that have the fifth segment ranging in values from .0040. through .0060. inclusive.
We've been trying to do something with the like clause: LIKE '__.__.__.__.[0-0][0-0][4-6][0-0]'.
We want 40 through 60 but we're getting 40, 50, and 60. If we change the last bracket to [0-9] we get 40 through 69.
Does anyone have any suggestions as to either fix our like clause or another approach?
Thanks.
John
Hi everyone,
Primary platform is sql25k running with sp2.
I'd like to define for a concrete field which only could have three values:
"a","b","c"
TIA
I have reservation database, suppose somebody reserved a resource on 10/12/2006 from 9:00am to 12pm. If anybody else want to reserve the same resource from 10am to 3pm. It will not let them reserver. I would like to check a range in store procedure. Is there has any function to check range in easy way?
Many thanks.
How is that I have stuff like...
13415-10-14 72:00:56.973
and -21858-02-28 390:54:27.200
in a datetime field when BOL says...
"Date and time data from January 1, 1753, through December 31, 9999, with an accuracy of three-hundredths of a second, or 3.33 milliseconds."
Not only that but I can't find where this field is getting written to in my trace
I come in to work 6.30am, and need to audit what happened from 5pm when I left to 6.30am this morning. I have used code to search 13.5 hours back from any given time:
SELECT * FROM TRANSACTION_HISTORY
WHERE TRANSACTION_HISTORY.ACTIVITY_DATE_TIME > (SELECT DATEADD(hour,-13.5,(SELECT MAX (TRANSACTION_HISTORY.ACTIVITY_DATE_TIME) FROM TRANSACTION_HISTORY)))
Problem is if I run query later, I lose time from the start, eg. If I run query at 7am, I only get results from 5.30pm onwards. Rather than change criteria every day, I wanted to able to search from 6.30am of the current day, back to 5.30pm of the previous day.
I have to do a report for each hour compare yesterday each hour of sales amount their output is below, how to write a query.
desire output 08:00 am -23:00pm
shop today Time yesterday current Amt Yest Amt diff amount
001 13:00-14:00 13:00-14:00 $10000 $20000 -10000 (down)
002 14:00-15:00 14:00-15:00 $10000 $15000 500 (up)
Time as at HH:MM
Yesterday Total $20000
today Total $35000
How to edit this query to show the total by shop on time range ?
current result.(Time range from 9:00am-23:00pm)
Shop Time_slot cur Amt, yest Amt, Diff Amt, Sales Direction
Abc 10:59 $100 $50 +50 (+)
Abc 11:59 $100 $50 +150 (+)
Abc 12:59 $100 $50 +50 (+)
BBB 11:59 $100 $50 +150 (+)
BBB 12:59 $100 $50 +50 (+)
------------------------------------------------------------------
Desired Result .
Shop Time_slot cur Amt, yest Amt, Diff Amt, Sales Direction
Abc 10:59 $100 $50 +50 (+)
Abc 11:59 $100 $50 +150 (+)
Abc 12:59 $100 $50 +50 (+)
Total $300 $150 +$200 (+)
BBB 11:59 $10 $50 -40 (-)
BBB 12:59 $10 $50 -40 (-)
Total $20 $100 -80 (-)
-----------------------------------------------------------
select shop
,ltrim(str(datepart(hh,yourdatetimefield)))+':00 - '+ltrim(str(datepart(hh,yourdatetimefield)))+':59' as time_span
,sum(case
when datediff(dd,yourdatetimefield,getdate())=0
[Code] .....
Our client wants to report on their trade volume for last year as compared to the current quarter. For simplicity let's pretend they have a report where they have a two key measures:
[Trade Volume - Tons]
[Trade Volume - Tons MTD]
[Trade Volume - Tons]
is based on outlook - that is, for any period we are reporting on the trade volume will be reported as actuals that have been loaded up until the current period, and forecast for the current and future periods.
[Trade Volume - Tons MTD] is based only on actuals - that is for any period we are reporting on the trade volume will be reported as actuals that have been loaded up until and including the current period, and 0 for any future periods.
If Feb09 is our current period, and we are using quarter on the time dimension (where quarter 1=Jan09,Feb09,Mar09) and we have the following data:
Jan09 Trade Volume Actual: 100 Trade Volume Forecast: 150
Feb09 Trade Volume Actual: 50 Trade Volume Forecast: 200
March09 Trade Volume Actual: 75 Trade Volume Forecast: 225
Then
[Trade Volume - Tons]=100+200+225=525
[Trade Volume - Tons MTD]=100+50=150
This is a problem, because the comparison with their current results ([Trade Volume - Tons MTD]) with what they 'forecast' ([Trade Volume - Tons]) is not based on the same period of time - we are comparing the sum of two periods versus three periods.To solve this we changed the reporting period to be monthly granularity, and now select Jan09-Feb09 as our range (as opposed to having a quarter granularity and selecting Q1,2009 in the example above).
This works well and produces the expected results:
[Trade Volume - Tons]=100+200=350
[Trade Volume - Tons MTD]=100+50=150
However, this introduces a secondary problem: we are doing a prior year calculation on the Trade Volume also, so the users can compare how the actuals are comparing to the same period last year.To do this we use the following formula for the prior year calculation:
Prior Year Actuals=([Measures].[Trade Volume - Tons], ParallelPeriod([Time].[544 Hierarchy].[Period Year],1,[Time].[544 Hierarchy].currentmember))
The problem is as soon as we move from quarter granularity to (monthly granularity AND select more than one monthly period) the Prior Year Actuals calculation produces a an error "The MDX function CURRENTMEMBER failed because the coordinate for the 'Period Year' attribute contains a set".So, ParallelPeriod does not like it when currentmember is a range (Jan09,Feb09) rather than a single period (Jan09).
I have a table of errors with a DateTime field for when the error occurred. Â I want to query the table for a given date range omitting the time portion. Â What is the most efficient way to perform this query?
View 5 Replies View Relatedcreating the missing records in a date/time range.
However, I need to return different groups for each span of records.
here's some data....
aaa1
aaa7
bbb2
bbb5
bbb6
The numbers are the hour of the day.
I need to return
aaa 0 0
aaa 1 1
aaa 2 0
aaa 3 0
...
bbb 0 0
bbb 1 0
bbb 2 1
...
and so on.
I've got a numbers table and I can left join with it but I just get nulls for the missing hours instead of having it as above.....I can't think of a way of repeating the groups for each of the 'missing' hours - other than creating a length insert statement to fill in the gaps....unless that is the only way of doing it.
I need to provide a minimum value over a 12 hour time range of data. I'm struggling with performance issues due to the amount of data. Currently I log about 100 devices reporting once per minute into a table. Also about once per minute I need to pull the minimum value reported for each device in the last 12 hours. Currently I'm maintaining a separate table with entries for just the last 12 hours and just performing a Select Min(Temp) Where DeviceID=x, but it already holds about 700,000 records at any given time. The number of devices will increase substantially and this will no longer be viable.
Sample Table
ID DeviceID Temp InsertDate
1 10 55 04-28-2015 8:00 AM
2 65 74 04-28-2015 8:00 AM
3 44 23 04-28-2015 8:00 AM
4 10 87 04-28-2015 8:01 AM
5 65 65 04-28-2015 8:01 AM
I want to update the time in a datetime field with the current time.
Fields current value is:
2013-11-11 00:00:00.000
I want to insert this into another table and when I do I want to grab the current time and update that field.
field name: picked_dt
Table: oeordlin
or is there a way through sql to update the time when the picked_dt is updated?
displaying time interval on y -axis for an ssrs report.
the values are static... it should start from 00:00 - 23:59 with 00:30 interval....
interval of 30 mins...
I tried several functions that are available but didnt work.
At the following MDX code , I want to get the aggregate of measure only for  members that are also in the specified last time (like in examp 01/06/2015) . I tried existing and exists, but without any lack.
WITH MEMBER A AS
(b)+(C)
MEMBER [Measures].[Aggregate] AS
Aggregate(DAYTIME].[Month].&[2013-01-01T00:00:00]:[DAYTIME].[Month].&[2015-06-01T00:00:00],
([Measures].[D])
[Code] ....
dear friends.................. i have a table like below.. name date ------------------------------------------------------------------------------------------------------------ anbumani 2/18/2008 4:15:56 PM anbumani 2/18/2008 4:21:29 PM anbumani 2/18/2008 4:23:03 PM anbumani 2/18/2008 4:25:25 PM i want a out put as only time (ex : 4:15:56 PM 4:21:29 PM 4:23:03 PM ) give me the stored procedure code in sql server 2005.. thanks and regards Samuel Chandradoss . J
View 3 Replies View Related
I looked at this post and it didn't work for me.
Trying to extract the time portion from a datetime field. ex 7:15:12 AM from 1/1/2008 7:15:12 aM
This is what I tried and neither functions give me the results I want....
SELECT DueTime, CONVERT(varchar, DueDate, 108) AS Expr1, SUBSTRING(CAST(DueDate AS varchar), 10, LEN(DueDate)) AS Expr2, CAST(DueDate AS varchar) AS Expr3FROM TODO
Due Time Expr1 Expr2 Expr3
1/1/2008 5:15:00 PM 00:00:00 12:00:00 AM Jan 1 2008 12:00:00 AM
It seems Cast(DueDate as varchar) is the problem it converts the time to the default 12:00:00 AM
In the above example I want 5:15:00 PM
Tx in advance
Hi,
I'm trying to use the Update command to change a field value. I only know the field name at run-time, how do you write this command. This is what I have done which just sets the variable @cFieldName to the value and not the field within the table.
UPDATE [Atable] SET @cFieldName = @aValue WHERE ([Id] = @Id_1)
Thanks
I am attempting to import a text file into a Sql Server table. The file contains a time field. The column in the table that I am trying to import into is a Smalldatetime field. The data looks like this "10:30". I keep getting errors on the import of the time field. Any suggestions?
View 1 Replies View RelatedHi,
I have a very beginer's question. I am trying to compare datetime field with time only. how can i just compare with time?
Select start_time,end_time from tblvouchers as sv,tblvoucherlines as svl
where sv.voucher_no = svl.voucher_no and
sv.equip_no = '01325' and svl.line_date ='03/14/2004'
and svl.start_time = '18:00' and svl.end_time = '00:00'
this query is not displaying any data.
Any help will be highly appreciated.
Dear Frends
Iam using SQL Server 2000
Is there any way to use Date time field to store value before the Date 01-Jan-1753?
Thanks
hello !
for MS SQL 2000
how can I get something like
SELECT name from users WHERE Count(name) > 1
i want to return only the rows where name appears more than 1 time
thank you
hi guyz i want to compare time from DateTime field i.e. i want to identify if the time is from 1pm to 2pm the do this else do......
select DATEPART(hour, loginTime) ......returns me the hour i can get the Hour part of the time but the prblem is how to identify it
whether it is less than 2:00:00 pm and greater than 1:00:00 pm i can do this task using at application level but i want this to b done at query level
any ideas??????????