I need help in understanding how the rank is calculated in FREETEXTABLE. I have a following query
select ft_tbl.saon
,ft_tbl.paon
,ft_tbl.street
,ft_tbl.postcode
,key_tbl.rank
from temp as ft_tbl
INNER JOIN freetextTABLE(temp, (saon, paon, street), '80 ridge avenue', 15) as key_tbl
ON FT_tbl.ID = key_tbl.[key]
First, the resulting rows does have one record which has an address 80 ridge avenue but it appears at 15th place. Ideally it should appear on 1st. All the ranks of the results are same.
Second, the results are also showing two rows which does not contain the specified search string at all. They not only appears above in the resulting table but also have the same rank as the result in question (80 ridge avenue). For example result shows €œLong Ridges, Flat 21, Fortis Green€? at fifth place which is no way near the search string. And actual record shows up at 15th Place
Is there any way we can influence the rank to show exact match first. Just to clarify I have removed the digits from noise file as we need to search house numbers. Digits appears in noise file as default.
SELECT[RANK] ,[KEY],idc.* FROMFREETEXTTABL (dbo.indice,mcaNombre,fabNombre,catNombre), 'ropa adidas nike', LANGUAGE 3082, 5) res left join dbo.indice idc with (nolock) on idc.idcCodigo=res.[key] ORDER BY [RANK] DESC;
Result:
RANK KEY 182 03 04 01
Why idcCods's 1 and 2 have different rank?? because idcCod's 3 and 4 affects ?? or it's just thinks of language??
Ok. Im not able to understand this logic please help. As you can see we have 2 columns of ranks, 1)normal 2)corrective. what is the logic behind this and how do u write a query for this? these ranks are for the Salary Column. Imran, "You truly do not know someone untill you fight them."-THE MATRIX.
EmpID Empname EmpSalary RankNormal RankCorrective 1 A 150001 1 2 B 100002 4 3 C 150001 1 4 D 40003 5 5 E 150001 1 6 F 15004 6 7 G 15004 6 8 H 5005 8
Hi All, Please let me know the equivalent of RANK() over ( order by...) in SQL server 2000. I thought this was supported in SQL server 2000. Please let me know if there exists a user defined function. Thanks in Advance.
I would like to write a query that gives me the values of a set ofobservations, and their rank.CREATE TABLE #Values(val int)INSERT #Values SELECT 1INSERT #Values SELECT 5INSERT #Values SELECT 10I would like to select this:1 10 -- rank 1, value 102 53 1I can put them into a temp table with an identity column, ordered bythe column I'm interested in, and then retrieve in order by theidentity column. I'm wondering if there's a way to do that with asubquery.Thanks,Jim
I've written a bunch of code using contains for fts. Then as I was trying to run the sorting, I realized that I have to use containstable in order to sort by rank. Is that correct? When I was using contains, I just used it as a where clause so I would have something like...
WHERE ((PostedUntil >= '5/22/2006') AND (SiteId=199)) AND (CONTAINS (PositionTitle, '"sales"') OR CONTAINS (Description, '"sales"'))
From the examples I've seen, in order to use containstable, I have to join a new dynamic table to the freetext enabled table and it only uses 1 containstable phrase for the new table. In my case, I may have multiple containstable phrases, so would they all fall in a () set like..
FROM Categories AS FT_TBL INNER JOIN (CONTAINSTABLE (table, col1, searchphrase) OR (CONTAINSTABLE(table, col2, searchphrase2) OR CONTAINSTABLE (table, col3, searchphrase3)) AS KEY_TBL
... or would each containstable have to be a new join? I don't want to spend anymore time going back and rewriting code just to test it since it's about a days worth of recoding. Thanks.
ive created a photo sharing site, and im trying to show the statisics for certain users, so far i can COUNT all the photos the user has upload, and show them in descending order, but i need to be able to see the ranking of the user, like :
until recently ive been using a rank equation to calculate rank,
essentially doing a select statement and selecting this as the rank field, where query 2 is the same as query 1:
((select count(*) from (query1) where (query1).value < (query2).value) +1)) as Rank
problem is that this is now running like a dog (takes 10 secs) and i'd like to try and do this another way- 2005 has a rank function, how can i do this in 2000?
here is the full statement :
SELECT StudentId, GCSE_Score, LTRIM(STR ((SELECT COUNT(*) FROM dbo.[Score2004-05] WHERE GCSE_score < s.GCSE_Score) + 1)) AS GCSE_Rank, SetId FROM dbo.[Score2004-05] S WHERE (SetId = '2004/2005')
I have a report created and within the report is columns that perform additions on the fields from the database.
I want to create a rank column to show the rank of the row compare with the rest.
Col1 Col2 Total Ranks 1 2 3 3 2 3 5 1 2 2 4 2
On the above Col 1 and 2 would come form my database, Total is calculated by the report. How can I get ranking on this total? I cannot sort by the total as the report should only showing rankings but not be ordered by the rank.
I am using SQL Server 2005 Reporting Services...anny help is much appreciated.
(SELECT JumpHeight, DogIdent, MIN(RunDate) as "MinRunDate", COUNT(Event_ID) AS "NoEvents",
RANK() OVER (PARTITION BY JumpHeight ORDER BY COUNT(Event_ID) DESC, MIN(RunDate)) AS "HeightRank"
FROM EventData
WHERE Event=@Event
GROUP BY JumpHeight, DogIdent) AS xx, Dogs, DogOwner
WHERE (Dogs.Breed = @Breed AND xx.DogIdent = Dogs.DogIdent and Dogs.Owner_ID = DogOwner.Owner_ID) AND
(xx.HeightRank <= 10)
ORDER BY xx.JumpHeight, xx.HeightRank
produces this output:
Jump Ht.
Rank
# of Events
First Event
Owner
Call Name
08
3
1
2/19/2006
Some Owner
Otto
08
4
1
3/12/2006
Some Owner
Schotzie
I want it to produce this output:
Jump Ht.
Rank
# of Events
First Event
Owner
Call Name
08
1
1
2/19/2006
Some Owner
Otto
08
2
1
3/12/2006
Some Owner
Schotzie
I have tried several things and cannot correct the problem. Obviously, RANK is being evaluated in the wrong place, but placing it elsewhere has failed to produce the above results.
Hi,All, I have one table like this UserID,Name,GameScore 1 A 25 2 B 23 3 C 22 4 D 25 5 E 23 6 F 26 Now i want the query which return like this Name Score Rank F 26 1 A 25 2 D 25 2 B 23 3 E 23 3 C 22 4 Can anyone give me the sql 2000 query for this
In the Sql below, sample from William Pearson, the amount Spend is in descending order and the Rank number is in ascending order. Like this:
Spend Rank 24 1 12 2 10 3 9 4
What I wish to accomplish is:
Spend Rank (descending) 24 4 12 3 10 2 9 1
Please let me know what I need to accomplish it.
Thanks for the help
Victor
SELECT CompanyName, Spend, (SELECT COUNT(*) FROM ACC0704 AS CoSpendTotal WHERE ACC0704.Spend <= CoSpendTotal.Spend) AS Rank FROM ACC0704 ORDER BY Spend DESC
i want to create a report so that a list of the top 30 records are returned to the report user. In the report i want to have the records position in the list shown (ie the first row should have 1. and the second should be 2. right on down to the 30th having 30.)
i am trying to create a rank formula.i just need to return the highest MCC count for the mcc code and return the seller code...So eg row 3 and 4, there are two MMC CODE called 4772, i need the formula to return the seller code r10, this is because r10 has 9 counts against that mcc code, and r03 has 9,
WITH MEMBER [Measures].[Rank] AS 'Rank ( Product.CurrentMember,Order( {Product.CurrentMember.Parent.Children} ,[Profit], DESC) ) ' SELECT {[Profit] , [Rank]} ON COLUMNS, Drink.Children ON ROWS FROM Sales
I need to get the previous price for all my PROMOTION records but not when the previous record is a type PROMOTION also it needs to keep going back to get the price.
I have created a table with RANK in which works OK to get previous price for all but how can I say if previous price is type PROMOTION go to next previous prices...
Bets way to show an example is with a jpeg image I have but having trouble inserting into this message...
SELECT a.[StartPrice] ,a.[ProductID] ,a.[Colour] ,ISNULL(b.[Price],a.[Price]) AS [Price Before] ,a.[Price] AS [Promotion Price]
I am trying to return the 100th ranking in my SQL, ie
SELECT DailyValueChange, BUSINESS_DATE, RANK() OVER (order by DailyValueChange) AS RANK_Vals
FROM Table
WHERE (BUSINESS_DATE = @CurrentBusDate) AND (RANK_Vals = 100)
However when I try to update the Stored Procedure it tells me RANK_Vals is an invalid column name, which is not the case as if I run it without the Where clase it runs and returns all results.
Any advice on how to get around this would be greatly appreciated.
Hi - Can someone point me to a single document that tells me how to get started from nothing with SQL Server 2005 Express? I keep getting pointed to lists of many documents, none of which does what I specifically need. They all seem to have many general instructions, but I just want to get started with some simple database that I load with a bit of data and then perform some queries.
I have ordered a book from Amazon but don't have much hope that it will do what I need.
I have a table that has the definition from the picture. Let's suppose I will sort the list based on last column (DATA.ORA - DESC). That means the last row inserted is the first one in the sorted list.
What I would like to do is to get only the records when the value of a specific column is different from the row below.
For instance I would like to get the rows where the column WHITE has different values. When the status for column WHITE changes from 0 to 1 or from 1 to 2 etc., then I need that row no matter if next 5 rows has the same status (1).
In the picture you see what the result of query should be:
Result: only the lines where the value of column WHITE is different than the row below.
Given the following results: col0 col1 col2 THY 2,265,850 31 VIE 1,474,994 20 RID 1,221,800 17 ACC 1,124,335 15 FEI 445,184 6 DIR 433,783 6 ROM 324,365 4
What is the best way in a query to get the rank of the returned rows by either col1 or col2. In other words who's the number 1,2,3 etc...
total count col0 = 7 total col1 = 7,290,310 total col2 (would eqaul 100%)= 99%
Looking for a mathmatical solution to this any help would be appreciated.
Guys Spent all morning on this - hope someone can help I've got some select code :
declare @BusinessDate DATETIME set @BusinessDate = '28 Feb 2005'
select --?? as period tdbe.eventid , tdbe.tradeid ,tdbe.cashflowstartdate from HDD_t_HA HA join hdd_t_Hedge_Instrument HI on HA.HAId = HI.HAId join hdd_t_TDB_Event TDBE on HI.EventId = TDBE.EventId join hdd_t_TDB TDB on TDBE.TradeId = TDB.TradeId where ha.haid = 29 and ha.validfrom <= getdate() and ha.validto > getdate() and tdbe.effectivefrom <= @BusinessDate and tdbe.effectiveto > @BusinessDate and tdb.effectivefrom <= @BusinessDate and tdb.effectiveto > @BusinessDate --and tdbe.tradeid = 117 order by tdbe.tradeid , cashflowstartdate
I'm trying to derive a 'period' value which is an integer based on the ordering of cashflowstartdatefor each tradeid group. The desired effect is as below
Assuming that I have a table similar to this simplified version:
CREATE TABLE [SomeTable] ([Field1] NVARCHAR(50));
How could I count and rank the instances of specific values in the "field1" column? For example, let's say that I want to show the frequency of the column values like so:
field1 count some value 24 another word 20 a value 5
I'm fairly new to SQL and I have been asked to load multiple tables with duplicate and inconsistent data into a single table. Each source (table) has been assigned a rank in terms of the quality and reliability. After some thought, I have come up with this solution to get all of the data loaded based on rank.
Does anyone know of a better way to do this?
Value is a unique key.
SELECT * FROM table_1
union
SELECT * FROM table_2 where (value + '_' + yr) in ( select value + '_' + yr from table_2 except select value + '_' + yr from table_1)
union
SELECT * FROM table_3 where (value + '_' + yr) in ( select value + '_' + yr from table_3 except select value + '_' + yr from table_2 except select value + '_' + yr from table_1)
I'm trying to script a view that does a simple query to some tables. The catch is 2 of the columns are created on run time. The first column is filled with a calculation with values of other columns. The 2nd column I would like to fill with the ranking of this calculated column
Example: (imagine caculatedcol is Sum(Col1+Col2+Col3)
I am new to SQL Server Integration Services. I need to help here.
If there is only one result set, I could get rank info by putting DENSE_RANK expression inside of my select. My case is that I have two data source. After union of them, I need rank the result set and save result set plus rank info into the destination. I tried to use Derived Column component by using expression DENSE_RANK() over ( order by columnName ). But it does not like it.
I am using FREETEXTTABLE to enable users to search forum posts. It works extremely well (and fast!) and I am very happy with it.
I also have a top ten list of 'Most viewed' forum posts. Each time a post is accessed, a 'viewcount' value is incremented accordingly. The ten forum posts with the highest viewcount appear in the top ten list (by order of viewcount, of course).
Now... when a user searches on a search term, I would like the top ten list to also be affected by this search.
For example, the user searches on 'foo'. In response they get a list of results containing 'foo'. However, the top ten list also changes to reflect this. It now shows the ten forum posts with the highest viewcount which also contain the word 'foo'.
This is easy enough to do. The problem arises when we also add proximity searches.
For example, if I search on 'foo bar', FREETEXTTABLE will look for records which have both or either of these words. Records which contain both words will be ranked higher than records which contain either word. And of the records which contain both words, the closer together the two words are, the higher the ranking will be.
But how does this now work with the top ten list? For example, I may have two records:
- Record A has been viewed 10 times. It contains the words 'foo' and 'bar' and they are next to each other. - Record B has been viewed 10,000 times. But it only contains the word 'foo'.
Now, according to 'viewcount', record B should be ranked higher. But according to FREETEXTTABLE, record A should be ranked higher.
So, I need to combine both these rankings in some way. Regardless of how the 'top ten' records are chosen, they will be ordered by viewcount. But I'm not sure how to get the right top ten records in the first place.
I want to be able to track my top 100 items sold in the last 60 days. Each night I want to calculate it then compare it with the numbers from the previous night. Then show both ranks. My problem is assigning them ranks. Bascily I have a view that shows the top 200 sorted correctly. I am thinking creating a DTS to make a new table with adding transformations. But I am not sure how to code the Visial Basic. Below is what I thought it would be, but it doesn't work. Get a generic error. Any ideas?dim ranknumranknum = 0Function Main() ranknum += 1 DTSDestination("Rank") = ranknum DTSDestination("ItemNumber") = DTSSource("ItemNumber") DTSDestination("QtySold") = DTSSource("QtySold") Main = DTSTransformStat_OKEnd Function
I have a query that returns a result that looks like this:
amount count steve 122000 12 jim 145213 13 paul 62325 7
I need to add 2 columns to this query that rank the employees by count and amount with a number, so for example:
amount amount_rank count count_rank steve 122000 2 12 2 jim 145213 1 13 1 paul 62325 3 7 3
I was going to paste the entire query in but I thought I'd try this first to see if I could get by with a hint. So essentially I need to evaluate with an order by or something and then insert a number as amount_rank and number as count_rank.
