Ranking Function Not Available In Reporting Services.
Aug 2, 2007
I have the problem.
I have many Cognos Reports to be converted in Reporting Services.
Out of which there are several Ranking Reports.
Cognos has inbuilt Rank Function while SSRS does not have.
I dont want to do grouping on Database level, rather trying to find a solution in RS.
But unfortunately I couldnt find any solution.
I sorted the group according to requirement, now only thing left is showing the rank number and limiting top 60 rows only.
I tried filters to show TopN, but always gives and error and also tried custom code to show the row number for that group but didn't work.
Anyone has any idea how to overcome this limitation of Reporting Services.
One more interesting is when I try to create a field in dataset having IIF and / within.. RS terminates, all unsaved work gone.
Sometimes I think Microsoft cannot have a product which is 100% perfact and working.
View 3 Replies
ADVERTISEMENT
Mar 29, 2007
I see a Rank function on SQL Server 2005 and this is exactly what I want. I am writing a Reporting Services report on Sql Server 2000 and the Rank function is not available on either software. The following is my data and what I want...
Name Value Rank
A 5 2
B 5 2
C 6 1
D 4 4
E 2 5
F 1 6Any ideas on how to code a rank function on SS 2000 or Reporting Services?
View 5 Replies
View Related
Apr 28, 2015
I want to display data in following format in ssrs report.
Rank Group Value
1 G1 10
2 G1 20
3 G1 30
4 G1 40
1 G2 25
2 G2 54
3 G2 64
I tried row count and other ranking functions but it did not working.
View 3 Replies
View Related
Dec 14, 2007
I have a rank column and a column with percents. The higher the percent the better the rank. How would I do this?
View 1 Replies
View Related
Mar 18, 2008
I have a end users that is in need of a some way to rank results in a Report Builder report. I have noticed that neither the RowCount or Ranking function is listed in the avaliable functions or expressions. Does anyone have an idea or solution to perform some type of ranking.
Example:
Name Count Rank
Brad 10 1
Bill 9 2
John 8 3
Seems to be a pretty simple function that was overlooked in Report Builder by MS.
View 3 Replies
View Related
Oct 7, 2006
I have the problem of aggregating semi-additive measures correct in higher levels in a matrix control of reporting services. I use the "Microsoft SQL Server Analysis Services" data provider. I have a calculated measure saved in the AS2005 cube which looks like:
[Measure].[Net Sales (kg)] = iif( [Measures].[Sales Volume KG] = 0, 0, [Measures].[Net Sales (RLG)] / [Measures].[Sales Volume KG] )
In the matrix, I have a 4 level Product Dimension on the rows (4 groups matrix1_level1 ..... matrix1_level4) and the visibility of the groups is toggled by each upper level, so I can drill in the product dimension. I place this measure in the data part of the matrix with (sum(Fields!Net_Sales__kg_.Value)). On the leave level all values ar correct. But on each other level, I see the sum of the sublevels.
After a lot of pain researching, I found that I have to use the "aggregate" function instead of the "sum" function, because aggregate uses the aggregating which comes from the data provider and the "Microsoft SQL Server Analysis Services" data provider is able to do that. Thats all of documentation I found. I have played around with this function, but always when I use it, I get no values on all levels. I tried the "scope" parameter of the aggregat function, nothing changed.
I tried aggreagate(Fields!Net_Sales__kg_.Value, "matrix1_level1"), aggreagate(Fields!Net_Sales__kg_.Value, "SalesCube") (SalesCub is the name of my Dataset in Reporting Services I use), aggreagate(Fields!Net_Sales__kg_.Value, "matrix1") and last but not least aggregate(Fields!Net_Sales__kg_.Value), all is the same, no values.
It seems to me, that the aggragate function returns "Nothing", because than, according to the Online Help, no values will be shown. But according to some blogs and forum entries, the "Microsoft SQL Server Analysis Services (AdomdClient)" Data provider should deal with aggregate. Have I do some special entries in the "Advanced..." Settings of the data provider??
Can someone tell me, what I'm doing wrong, and did someone know a good documentation (with examples) for the aggregate function on the internet. The Help-file doc is very, very poor!!!
Thanks
Hans
View 4 Replies
View Related
Nov 13, 2015
I have got a sql query and converting a Crystal report to Sql report but struggling on few places.When I created the report I need to have a column where I am struggling to figure out how to add this to the column
"if {Clocked_In} = "Y" then
"Yes"
else
if {This} then "Holiday"
else if {Sick} then "Sick"
else if {Absent} then "Absent"
else "No"
"In Crystal four columns make into one but I am not sure how can I do it in SQL report builder.
View 7 Replies
View Related
Oct 22, 2015
I am using the following function to set the time format, however I now need to to add an IF statement into this equation.This is the current expression I am using:
=Floor(Fields!ACD_Calls.Value / 3600) &":"& Format(DateAdd("s", Fields!ACD_Calls.Value, "00:00"), "mm:ss")
Now I need to use the following expression with this:
=IIF(Parameters!ReportType.Value="Average", Sum(Fields!ACD_Calls.Value)/CountRows(), Sum(Fields!ACD_Calls.Value))
How do I join the two together?
View 4 Replies
View Related
Apr 20, 2015
We are constrained to use a model that stores records in a main table and various attributes of the record in a second table. Something like this: main record table CAR, attribute table CAR_DETAILS with CAR_DETAILS have key value pairs like "color" "blue" and "doors" "4".
For reports we need to flatten the one to many nature of this to get CAR and color and doors by using an aggregate function like:
car_id, max(car_detail.value) filtered on car_detail.key = "color", max(car_detail.value) filtered on car_detail.key = "doors".
This works on other tables but the car_detail table (shall we say) appears to store its values as blobs. In any case when we attempt to aggregate we get "The query uses an aggregate function on a large value type expression. Large value type expressions can not be aggregated."
Since we can't change the model, we would need to use another function to change this to a smaller string (or date, these are actually mostly date), but none of the very limited set of functions available seems to work to make this aggregation possible (and there is no "first" or anything else similar).
The list of functions available in Report Model Queries can be found at [URL] .....
View 2 Replies
View Related
Oct 7, 2015
I have a report that is using the following expression for one of the fields:
=Split(Fields!FromAccount.Value, " ")(1)
The format of the number is xxxxx-xxx xxxxxxxxxxxx
So the function is to grab the second section of numbers after the space. The query for this report can bring back 1 to many results which equals one to many pages.
I have an issue where the query returns three results. The first page will display the correct number, the second page displays #Error and the third displays the number.
When I run the query from Management Studio I see the numbers are as follows:
xxxxx-xxx xxxxxxxxxxxx
xxxxx-xxx xxxxxxxxxxxx
xxxxx-xxx xxxxxxxxxxxx
Note the first and and last lines have extra spaces which I thought would be the cause of the problem though I would've expected the #Error to appear on the first and third page rather than the second one.
When I remove the extra space for the first and third number all three pages display their values correctly.
However, there are many, many numbers in the table that have one to two spaces. These numbers are from a spreadsheet that is imported biweekly. So it was either I fix the spreadsheet before every import or I come up with a new expression to check for one or two spaces. This is what I came up with:
=IIF (Fields!FromAccount.Value.Contains(" "), Split(Fields!FromAccount.Value, " ")(1),Split(Fields!FromAccount.Value, " ")(1))
Now, the first page displays the number correctly while the second and third page displays with the #Error. Basically I want to say if the value contains two spaces then split at the two spaces otherwise split at the one space.
View 3 Replies
View Related
Oct 8, 2015
how to call javascript function in SSRS Reports?
View 3 Replies
View Related
Sep 23, 2015
How to call a table valued functions from SSRS reports ?
Is there a way to call by selecting Dataset properties> Query >Stored Procedure radio button, If not then why our object type function is visible under this list.
MS SQL Server 2008 R2
View 5 Replies
View Related
May 27, 2015
I have a query where I am trying to display the most recent information about travelling method of customers using "t.collection_date". I am struggling to get MAX function working in the query.
SELECT P.id, P.forename, P.surname, P.dob, c.postcode, l.code_des, MAX(t.collection_date)
FROM People p,
MOT_HIST t,
lk_mode_of_travel l,
corresp_address c
WHERE p.ID = t.id (+)
AND t.mode_of_travel = l.int_code (+)
AND p.id = c.entity_id (+)
View 6 Replies
View Related
Sep 7, 2015
Create report with SharePoint list. Columns are displaying on the report I used out of the group SUM function and it is group by report. one group total is showing correct total and other groups are showing wrong total and showing too much big value even there is whole column is empty.where value is not in column I am using "-" with IIF function. these columns are calculating by using date difference function between two date columns. these values coming with minus value . so ABS function is also using.
Columns calculation expression:
=IIF(ISNOTHING(Fields!DateCAPackage.Value)
OR (ISNOTHING(Fields!Date_CA_Application.Value)) ,
"-" , CINT(Abs(DateDiff("d",Fields!Date_CA_Application.Value,Fields!DateCAPackage.Value))))
Total calculation expression:
=Sum(ABS(DateDiff(
"d",Fields!Date_CA_Application.Value,Fields!DateCAPackage.Value)))
View 5 Replies
View Related
Jun 30, 2009
we need the list suppliers in a text box,if it were a parameter, we can do it by =join(parameters!Supplier_ID.Value,",")but if the Supplier Id is a field , join (Fields!Supplier_ID.Value,",") doesnt work!how to achieve this.
View 9 Replies
View Related
Jul 24, 2015
I have an SSRS report with several variables, some of which are multi-valued. The main query that feeds the report uses some table value functions. For example, the query looks something like this:
select tv1.a, tv1.b, tv2.x, tv2.y, tbl.m, tbl.n
from tableValueFunction1(@MultiValueParam) as tv1
inner join tableValueFunction2(@MultiValueParam) as tv2 on tv1.xxx = tv2.xxx
inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (@MultiValueParam).When I try to run this, I get an error saying that I'm feeding the wrong number of parameters into the table value functions. I've fed multi-valued parameters to stored procedures before and used a splitter function to split out the comma separated values, so I was planning to do the same thing in this scenario. However, this is different. When I look at the query in SQL Profiler, it shows discrete values for the multi value parameter. For example, the same query above looks like this when viewed through the profiler (using 1,2,3 as my multi-value selection):
select tv1.a, tv1.b, tv2.x, tv3.y, tbl.m, tbl.n
from tableValueFunction1(1,2,3) as tv1
inner join tableValueFunction2(1,2,3) as tv2 on tv1.xxx = tv2.xxx
inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (1,2,3)
In other words, SSRS isn't converting the multi-value parameter to a comma separated string, like it normally does.
View 2 Replies
View Related
May 7, 2015
In my SSRS report i have a date parameter and i want to set to it a default value with a complicated logic. I arrived at this strange behaviour:
Today is May 6th, wednesday. If i use the following expression:
DateAdd("d",Weekday(Today(),DayOfWeek.Sunday),Today())
for the default time picker I get May 9th. If I use exactly the same expression in a textbox in the same report
DateAdd("d",Weekday(Today(),DayOfWeek.Sunday),Today()).ToLongDateString()
I get May 10th! The only thing that changes is the toString. Why are the two values different? I tried with different expressions and the difference arises when i start using Weekday(Today(), somevalue).
The result of Weekday should be independent from regional settings as I am forcing Sunday to be the first day of the week, right?
View 2 Replies
View Related
Jun 4, 2015
When i open any reports getting the below error message.An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.
(rsReportServerDatabaseError)Procedure or function 'CreateSession' expects parameter '@SiteZone', which was not supplied.
View 7 Replies
View Related
Nov 23, 2015
I have a report that uses a stored procedure as a dataset.The stored procedure accepts four parameters, which I have defined in the report. works fine in query builder and SSMS.
When I run the report I get an error stating a parameter is missing. I tried deleting parameters and recreating not luck.
View 4 Replies
View Related
May 6, 2015
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
=CountDistinct(IIf(Fields!Region.Value="AP", "PC_With_Active_SCCM_Clients"),(Fields!Name.Value, "PC_With_Active_SCCM_Clients"),Nothing)/CountDistinct(IIf(Fields!Region.Value="AP", "Total_Count_Of_AD_PC"),(Fields!name.Value,
"Total_Count_Of_AD_PC"),Nothing)
Below is the error message....
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
View 6 Replies
View Related
Jul 6, 2015
I've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.
View 2 Replies
View Related
Mar 22, 2008
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
View 1 Replies
View Related
Dec 6, 2006
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
View 1 Replies
View Related
Jul 27, 2015
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
View 7 Replies
View Related
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Sep 11, 2015
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
View 4 Replies
View Related
May 14, 2008
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
View 4 Replies
View Related
Nov 3, 2015
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies
View Related
Jun 19, 2015
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
View 3 Replies
View Related
Jan 15, 2007
HI There
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
This is for reporting services 2000 and 2005.
Thanx
View 1 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Jul 23, 2010
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
View 4 Replies
View Related
