Rawfile Lookup Component
Mar 14, 2008Hi,
Is there anyone out there develop raw file lookup component?
If not, is there anyway to read a raw file except using raw file source adapter?
Many Thanks,
XL
ADVERTISEMENT
Lookup Component Feature
Jul 27, 2006Has anyone seen this strange behaviour?
I have a package which loads the fact data from Stage into Warehouse database. This packages normally handles early arriving facts. In that package I use lookup to check the dims which exists, and where they don't I populate the dimension and use the surrogate key to load the facts. This works fine.
I had a request to load 7 years worth of historical data. Instead of re-writing the package I took the package which handles early arriving facts and deleted the section which handles early arriving facts. I knew all the dimensions already exists and I don€™t want to hinder the performance when I load millions of rows. During testing I found something very interesting.
If you have configured error path in the lookup component and removed the error path later, the package will NOT fail (won't produce error) even if the lookup can't find matching values.
Correct Behaviour Example 1:
[1] Stage fact table has 2 records, with product code 1 and 2.
[2] Warehouse Product table has only product code 1.
[3] Source - Lookup - Destination in the data flow task. Error port on lookup is not configured.
[4] From source we read 2 records, and the package will fail at lookup as it can't find Product Code 2.
Correct Behaviour Example 2:
[1] Stage fact table has 2 records, with product code 1 and 2.
[2] Warehouse Product table has only product code 1.
[3] Source - Lookup - Destination in the data flow task. Error port on lookup is configured to go to RowCount.
[4] From source we read 2 records, and the package will run successfully. It will put one record into warehouse table and send the invalid record into RowCount.
Incorrect Behaviour Example 3:
[1] Stage fact table has 2 records, with product code 1 and 2.
[2] Warehouse Product table has only product code 1.
[3] Source - Lookup - Destination in the data flow task. Delete the configured error port from lookup.
[4] From source we read 2 records, and the package will run successfully. It will put one record into warehouse table and discard the other.
My understanding if the error port is NOT configured as shown in example 2, it should fail as shown in example 1.
Am I missing a point or is this suppose to be a correct behaviour or is it a bug?
Thanks
Sutha
Lookup Component Question
Jan 29, 2007Hi,
i am doing a lookup to insert new records when the lookup has failed.
this works perfectly normally. however when my recordset has a name-column of type string with width 5 and my lookup-table has a name-column of char(20) the lookup will always fail and henc always inserting new records although the name "foo" should match.
is there a workaround for this, or do the compare-columns always have to be of the same type/length ?
Lookup Component - Programatically
Dec 5, 2006Need to ask three questions regarding this component I am creating programatically:
1) How do you select "Modify the SQL statement" programatically.
2) How do you change the actual sql.
3) How do you add a parameter, also programatically.
I have manged to select "Enable memory restriction" by using
instance.SetComponentProperty("CacheType", 2);
but can't add a paramater and modify sql statement. Have used
instance.SetComponentProperty("SqlCommand", statement); and
instance.SetComponentProperty("SqlCommandParam", statement);
with no luck. Any ideas, have searched the web but found nothing.
Thanks.
Lookup Component Question
Jan 17, 2008Let's say I've a dimension with over 20 million rows. During my ETL, I need to replace the business keys with all the surrogate keys from this large dimension. The logic choice is to use the Lookup component. But does the Lookup component load all the 20 million rows into the memory? For a large dimension surrogate key lookup, what is the typical approach? TIA.
View 5 Replies View RelatedLookup Component Stalls
Apr 12, 2007i am using a lookup component to do a typical SCD. Compare the Natural keys and if they are the same -- REdirect the rows and do whatever, If not present -- means the Error Rows -- redirect and do whatever.
WHen I use the component to do a Historical Load (which means -- there are no rows are in the Destination table) and put the Memory to Partial Cache -- the Data Flow STalls after about 46,000 rows, it just doesnt complete after that. But the moment I switch it to Full Cache -- it flows -- But Partial is what I am supposed to be using -- keeping in mind -- the Incremental Loads. Why does the component stall ?
I had used Partial Cache in an earlier project -- with a 18 Million Row Table --(albeit for incremental load) and it worked fine (though is was slow -- but tleast it worked) -- but now I am trying to load just 300,000 rows but it stalls.
I am using a 2GB RAM machine -- and set the Memory to 750 MB/500 MB nothing worked
I tried two different machines -- same thing happened.
Any insight will be appreciated.
Strange Error In Lookup Component
Aug 18, 2006Hi,
I am getting this error in a Lookup component:
Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT
FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2
WHERE
T1.DL_CODE = T2.DL_CODE
AND
T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
Thanks,
Aref
AcquireConnection Error - Lookup Component
May 10, 2006Hi,
Trying to get a particular SSIS is package working - while running the Package Installation wizard a package is reported with the following errors:
AcquireConnection method fails with error code 0xC0202009
Then Lookup fails validation and returns code 0xC020801C
The odd thing is the Lookup does not exist in the package, it did exist at one point but was deleted.
I have tried searching the XML and can't find any reference to the Lookup
Any suggestions appreciated...
Thanks,
John
Reusing A Chached Lookup Component
May 10, 2006Is it possible to reuse a Lookup component which is configured with Full chaching?
My requirement is as follows....
A input file have 2 columns called CurrentLocation and PreviousLocation. In the dataflow, values of these two columns needs to be replaced with values from a look up table called "Location".
In my package i have added two LookUp components which replaces values of CurrentLocation and PreviousLocation with the values available in the table "Location". Is there any way to reuse the cache of first lookup component for second column also?
SSIS Buffer Problem - Lookup Component
Aug 15, 2006Hi,
I am facing a problem with Lookup component in SSIS. I need to lookup from a transaction table for getting some info, But when im trying to implement the same, the Pre-Execute step itself got failed saying like,
€œ[DTS.Pipeline] Information: The buffer manager failed a memory allocation call for 524264 bytes, but was unable to swap out any buffers to relieve memory pressure. 9467 buffers were considered and 5956 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
[Tracer [19717]] Error: A buffer could not be locked. The system is out of memory or the buffer manager has reached its quota.
[DTS.Pipeline] Error: component "Tracer" (19717) failed the pre-execute phase and returned error code 0xC020204B.€?
Component Tracer is the Look up. Tracer is having around 6.5 mil records. Is there any way to allocate more buffers thru buffer manager? Or is there any alternative to solve this problem? FYI, the hard disk free space is more than 250 GB.
Thanks in advance.
Lookup Component Error: Statement(s) Could Not Be Prepared.
Oct 8, 2007Hi all,
I recieve an error when I use the Lookup component in SSIS that reads:
Statement(s) could not be prepared.
I'm using a SQL 2005 DB as the source which runs into a lookup table and is use to compare records with an SQL 2000 Database. I've created connection managers successfully to both these databases. When trying to use the results of an SQL Query for the lookup to the SQL 2000 database (which is a linked server) and I try to map the columns, the error pops up and exits out of the lookup properties Window
The details to the error read:
Program Location:
at Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.Connections.SQLTaskConnectionOleDbClass.PrepareSQLStatement(String sql, Boolean bypassPrepare)
at Microsoft.DataTransformationServices.Design.DtsConnectionCommonControl.CheckSqlQuery()
I'm looking to use the results of this comparison to output in some form of a report. Ideas would be greatly appreciated!
SSIS Package Designer Lookup Component GUI Error?
Jul 5, 2006Has anybody seen this issue already?
If you try to "enable memory restriction" from the Lookup component GUI you need to input both 32 and 64 bit size of maximum memory. However when clicking "OK" on the editor you get a message like :
TITLE: Microsoft Visual Studio
------------------------------
Error at Update Execution Logs [Lookup folder path 1 [4429]]: Failed to set property "MaxMemoryUsage64" on "component "Lookup folder path 1" (4429)".
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204006 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
You can only set the properties directly for mthe Properties window (F4).
I think this is a post SP1 bug in Visual studio designer...
Accessing A Lookup Table From Inside A Transform Script Component
Feb 6, 2007
I have a requirement to access a lookup table from within an SSIS Transform Script Component
The aim is to eliminate error characters from within the firstname, lastname, address etc. fields by doing a lookup of an ASCII code reference table and making an InStr() type comparison.
I cannot find a way of opening the reference data set from withing the transform.
Regards
Tim
Can You Cache A SSIS Lookup Component To Foxpro V7 With Parameterized Query?
Feb 24, 2006I am using a lookup component in a SSIS data flow. The lookup is a select to a foxpro table. THe lookup works fine with full cache selected. I cannot get the lookup to work with a partial or no cache. I have the latest Foxpro OLE DB driver installed which I understand to support paramaterized queries. Has anyone had success with using cached lookup to Foxpro? Does anyone know how to set the lookup properties of sqlcommand and sqlcommandparam? I am unable to find any examples in BOL or on the web.
Here are some details. IF I go with "use a table or a view" option with the default cache query I get initialization errors
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E14 Description: "Command contains unrecognized phrase/keyword.".
In the advanced editor I see
SQLCommand set to
"select * from `kcf`"
and SQLCommandParam set to
"select * from
(select * from `kcf`) as refTable
where [refTable].[patkey] = ? and [refTable].[dayof_stay] = ? and [refTable].[modifier] = ? and [refTable].[kcf_code] = ? and [refTable].[source] = ? and [refTable].[kcf_time] = ?"
I believe the above error is because Foxpro V7 does not support the inner subselect . In addition the query contains CRLF without a continuation character (";").
If I remove the CRLF in the sqlcommandparam query, using the advanced editor, I get this design time error "OLE D error occurred while loading column metadata. Check the sqlcommand and sqlcommandparam properties". The designer requires both properties to be set, its unclear to me how the interact.
I cannot find any examples in BOL or on the web on how to set these 2 properties. Can someone give me a few guidelines?
I can get past the design errors by changing sqlcommandparam to a plain select that is VFP 7 compatible ( I removed the subselect and the square brackets):
select * from kcf as refTable where refTable.patkey = ? and refTable.dayof_stay = ? and refTable.modifier = ? and refTable.kcf_code = ? and refTable.source = ? and refTable.kcf_time = ?
But then I get a runtime error
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E46. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E46 Description: "One or more accessor flags were invalid.".
[lkp_lab_worst_value [6170]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
Any idea on what I should try next ?
Integration Services :: Additional Option In The Lookup (Fail Component On Matching Records)?
Nov 4, 2015I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
The Component Metadata For Component DataReader Source (1113) Could Not Be Upgraded To The Newer Version Of The Component.
Oct 26, 2007Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
The Component Metadata For Component DataReader Source Could Not Be Upgraded To The Newer Version Of The Component.
Jan 23, 2007Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
Performance Expectations For Fuzzy Lookup Against 25mill Row Lookup Table
Oct 31, 2007We did some "at scale" fuzzy lookup tests today and were rather disappointed with the performance. I'm wanting to know your experience so I can set my performance expectations appropriately.
We were doing a fuzzy lookup against a lookup table with 25 million rows. Each row has 11 columns used in the fuzzy lookup, each between 10-100 chars. We set CopyReferenceTable=0 and MatchIndexOptions=GenerateAndPersistNewIndex and WarmCaches=true. It took about 60 minutes to build that index table, during which, dtexec got up to 4.5GB memory usage. (Is there a way to tell what % of the index table got cached in memory? Memory kept rising as each "Finished building X% of fuzzy index" progress event scrolled by all the way up to 100% progress when it peaked at 4.5GB.) The MaxMemoryUsage setting we left blank so it would use as much as possible on this 64-bit box with 16GB of memory (but only about 4GB was available for SSIS).
After it got done building the index table, it started flowing data through the pipeline. We saw the first buffer of ~9,000 rows get passed from the source to the fuzzy lookup transform. Six hours later it had not finished doing the fuzzy lookup on that first buffer!!! Running profiler showed us it was firing off lots of singelton SQL queries doing lookups as expected. So it was making progress, just very, very slowly.
We had set MinSimilarity=0.45 and Exhaustive=False. Those seemed to be reasonable settings for smaller datasets.
Does that performance seem inline with expectations? Any thoughts to improve performance?
Fuzzy Lookup Error When Adding Additional Lookup Columns
Sep 26, 2007I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
Reporting Services :: SSRS Lookup - Can Use More Than One Field When Doing Lookup
Sep 23, 2015Say I want to lookup a value in another dataset, but there is a grouping that requires you to know what the values for each level is in order to get to the correct detail record.  Can you still use the lookup function with more than one field to compare against? So for example
Department
\___SalesPerson
    \___Measure
I want to be able to add a new row at the Measure level, but lookup each field from another dataset. In order to do that I will need the Department AND SalesPerson values to do the lookup, but I dont think the Lookup function will let us do that will.
Is It Possible To Lookup Value Based On Two Tables Using Lookup Task
Jun 27, 2007Hi All,
Actually this is in regard to SCD Type 2 Dimension, Scenario is like that I am moving Fact table from some old source and I have dimensionA description value in fact which I want to replace with appropriate id from Dimension Table and that Dimension table is SCD Type 2 based on StartDate and EndDate and Fact Table doesn't contains direct date value rather there is timeId in Fact so to update the value in Fact table I have to Join Time Dimension table and other Dimension Table to replace fact Description with proper Id.
Lets assume DimensionA Structure
id
Description
StartDate
EndDate
Fact Table
id
measure1
measure2
TimeId
Description
Time Dimension
TimeId
Date
Day
Hour ...
Row Yielded No Match During Lookup When Using 2 Columns In Lookup
Jul 24, 2007I am doing a lookup that requires mapping 2 columns in the column mapping section. When I do this, I get the error "Row yielded no match during lookup" . The SQL that I captured in SQL profiler does find the record when I run it in Management Studio. I have already tried trimming everything to no avail.
Why is this happening?
I tried enabling memory restrictions but then I my package hangs and I get a SQLDUMPER_ERRORLOG.log file with the following logged:
07/24/07 13:35:48, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 5952
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0033.mdmp
07/24/07 13:35:49, ACTION, DtsDebugHost.exe, Watson Invoke: No
Why am I getting this error with "Enable Memory Restriction"?
Use Of A SSIS Variable Of Type “Object� Inside Script Component And Task Component
Mar 16, 2007In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
€¦€¦€¦€¦€¦€¦€¦.
€¦€¦€¦€¦€¦€¦€¦.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!
A Custom Component For Use As A VIEW In SSIS- Is It Possible To Create One MERGE Like Component With More Than 2 Inputs
Aug 13, 2007Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
Reference To Preceeding Component From Custom Dataflow Transformation Component
Mar 30, 2006I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
Serious Script Component Bug - Clears Out All Code Inside Component
Nov 27, 2007
No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.
I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.
And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.
I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.
I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.
I can reproduce this on 2 different computers.
Anyone experience this problem ? Any idea how to stop it ? Or debug it ?
Here is a slimmed down code sample of what causes the error :
Public Class ScriptMain
Public Sub Main()
Try
Dim xmlDoc As New XmlDocument
xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml")
MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up"
Catch ex As Exception
MsgBox(ex.Message)
UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message)
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub UpdateXML(ByVal fileName As String, ByVal message As String)
Try
Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4)
Dim rd As StreamReader = New StreamReader(fileName)
Dim xml As String = rd.ReadToEnd()
Xml = Xml.Replace(invalidChar, String.Empty)
xml = xml.Replace("", String.Empty)
xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[")
xml = xml.Replace("]]>]]>", "]]>")
MsgBox("replaced")
rd.Close()
Dim wr As StreamWriter = New StreamWriter(fileName)
wr.Write(xml)
wr.Close()
Dim xdoc As XmlDocument = New XmlDocument()
xdoc.Load(fileName)
Catch ex As Exception
UpdateXML(fileName, ex.Message)
End Try
End Sub
End Class
Row Yielded No Match During Lookup While There Is No Row Going Through The Lookup
Sep 29, 2006Hi all,
I don't understand what's happening here.
I have a Conditional Split with 3 outputs. On the first output I have a lookup, when I execute the package I have 56 rows going through the Conditional Split, all rows are then going to the 2nd and 3rd output but the lookup on the first output generates an error "Row yielded no match during lookup".
I don't understand why the lookup is generating an error while there is no row going through it.
Any idea ?
Sébastien.
How To Pick Nearby Text Of Lookup Terms With Help Of Term Extraction/Term Lookup
Oct 4, 2007I am designing a ssis package,This is intends to mine text data(Data extracted from websites).
Term lookup/Term extraction has been used as tools for mining.
I have lookup terms defined with me for reference table,but the main problem lie in extracting the nearby text/number/charcters to these lookup terms during mining.
For example :
I found noun "Email" 200 (frequency score) times in my text,Now I want to extract nearby email address(this is also true for PhoneNumber,Address attributes also).so how can I achieve this with SSIS.
If u have some idea/suggestion to carry out this challenge with or without Term Extraction/Term Lookup,plz do write here.
Enable Error Handling When Writing Custom Source Component /custom Error Handling Component.
Apr 21, 20061) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,
2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.
Thanks in advance.
Lookup
Aug 2, 2004I want to lookup values from a database into another database both of which are in the same sql server 2000. One databases is called GamingCommissiondb the other is called LicensingActions I need some of the tables to communicate with each other, to look values from one another. Example I need the Termination table to look up values from the Revocations table. Would using LinkedServers suffice??
View 5 Replies View RelatedLookup UDF
Jul 20, 2007Hi,
Can anybody provide me a Lookup UDF? I need to supply columnname,Tablename and condition dynamically and I need the scalar value in return.
Any help will be greatly appreciated...
Lookup
May 1, 2008Hi,
I am transferring the xml data from an xml file into sql server table using ssis.
To avoid any duplicate import via this ssis package, I would like to first check if data exists in the sql server table for what is about to be imported. If so then delete the existing data and then import.
Question:
How do I get the field value say ID field from the file and then take this id and delete these from the table in sql server first.
Is this to do with lookup or is there an easier way to do this please?
thanks
Help Using Lookup
Mar 15, 2007Hi
I am trying to use lookup to see if a item esists in my table ( 3 key fields ). If the lookup fails I want to insert the records. If it succeeds I have put a recordcount to catch the items that are not required. I don't think that I understand the settings for failed rows. I have tried setting the Configure Error Output to redirect, but this does not seem to work. I have the below errors.
[SQL Server Destination [151]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: component "SQL Server Destination" (151) failed the pre-execute phase and returned error code 0xC0202071.
Can someone please advise me how to set up this component to work for my application
Thanks
ADG