I am trying to use a stored procedure inside the scripter in a site server pipeline. Can anyone tell me how the scripter will read the the result which is a variable. The stored procedure is returning the right value when run in query analyzer but I don't know how to retrieve it inside the pipeline.
Thank you
JG
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies View RelatedI have a stored procedure that selects * from my table, and it seems to be working fine:
USE myDB
GO
IF OBJECT_ID ( 'dbo.GetAll', 'P') IS NOT NULL
DROP PROCEDURE GetAll
GO
CREATE PROCEDURE GetAll
AS
DECLARE ref_cur Cursor
FOR
SELECT * FROM myTable
Open ref_cur
FETCH NEXT FROM ref_cur
DEALLOCATE ref_cur
The problem is, I'm trying to create a DB class, and I'm not sure what Parameter settings I'm supposed to use for my returned values. Can anyone help me finish this?public class dbGet_base
{
public dbGet_base()
{
_requestId = 0;
}
public dbGet_base(Int64 RequestId)
{
this._requestId = RequestId;
getDbValues(RequestId);
}
public void getDbValues(Int64 RequestId)
{
getDbValues(RequestId, "GetAll");
}
public void getDbValues(Int64 RequestId, string SP_Name)
{
using(SqlConnection Conn = new SqlConnection(ConfigurationManager.AppSettings["WSConnection"]))
using (SqlCommand Command = new SqlCommand(SP_Name, Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@Request_Id", SqlDbType.Int).Value = RequestId;
Command.Parameters.Add(??
}
}
Goodday.
I have finally been able to create a connection from Access to the SQL 2005 Server and was able to call a stored proc (in Server) in the following way
Code Block
Dim cnn As New ADODB.Connection
Dim cmd As New ADODB.Command
Dim rst As New ADODB.Recordset
cnn.ConnectionString = "Provider='sqloledb'; Data Source='Private';" & _
"Initial Catalog='DBName';Integrated Security='SSPI';"
cnn.Open
cmd.ActiveConnection = cnn
cmd.CommandText = "sp_DefaultEntityData"
cmd.CommandType = adCmdStoredProc
Set rst = cmd.Execute
rst.MoveFirst
Do While Not rst.EOF
lstEntity.AddItem (rst.Fields(0)), 0
'lstEntity.AddItem (rst.Fields(1)), 1
rst.MoveNext
Loop
The Stored Proc is as follow:
Code Block
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_DefaultEntityData]
AS
BEGIN
SET NOCOUNT ON;
SELECT tblEntities.[Name], tblEntities.PrimaryKey
FROM tblEntities
ORDER BY tblEntities.PrimaryKey;
END
The table contains 24 entries
As you can see in the VB code, I am trying to read the returned "table" into an Access ListBox. The listbox should display the entities Name but not the Primary key, but the primary key should still be "stored" in the to so that it can be used to access other data.
I have moved the tables from Access to SQL Server 2005, and would also like to port all the sql queries to sp's in SQL Server. The old way for populating the listbox was a direct SQL query in the RowSource property field. I have tried to set the lstEntity.RowSource = rst but it did not work.
Here are my Q's:
1) As what does the SP return when it is called and is there a better way to catch it than I am doing at the moment?
2) How do I read the values into the listbox, without displaying the primary key in die box?
Thank you in advance!
Any help is very much appreciated.
I have no problem getting OLE DB Command transformations to support single returns by a procedure.
For example, exec name_of_procedure ?,?,? OUTPUT
However, I have a stored procedure which accepts 1 input and returns 5 outputs. This procedure works fine at the command line but when I try to incorporate it into a OLE DB Command I don't get the multiple values returned. There's no problem at all configuring the transform as it recognizes all input and output parameters. For some reason I just don't get values returned.
thanks
John
Hi, I'm having a difficult time getting the result from a stored procedure, where the result is stored in a dataset, and then displayed in a gridview. I have the following code: //SqlConnection conn = new SqlConnection("Data Source=GTS-02;Initial Catalog=Victor;User ID=name;Password=.pass"); string conn = System.Configuration.ConfigurationManager.AppSettings.GetValues("ConnectionString")[0]; SqlConnection m_dbConn = null; SqlCommand sqlCmd = new SqlCommand(); DataSet dsTest = new DataSet();
m_dbConn = new SqlConnection(conn); sqlCmd.CommandType = CommandType.StoredProcedure; sqlCmd = new SqlCommand("TESTME", m_dbConn); SqlParameter parmParam1 = new SqlParameter("@Param1", TextBox2.Text); sqlCmd.Parameters.Add(parmParam1); m_dbConn.Open(); SqlDataAdapter sqlDataIn = new SqlDataAdapter(sqlCmd); sqlDataIn.Fill(dsTest, "Result");
GridView1.DataSource = dsTest.Tables["Result"]; GridView1.DataBind(); m_dbConn.Close();I can see through debugging that I'm connected to the sql database, but I'm not able to retrieve the result from the stored procedure. Any advice would be greatly appreciated! DZ
Hi,
I use a strong-typed DataSet to build the data access tier of my application, and the IDE generates most of code for me. However I can't find a way to get the value returned by a stored procedure(The stored procedure seems like 'RETURN 0').I noticed that a @RETURN_VALUE parameter is added automatically for each query method, but I don't know how to read the value.
Anybody could help me with the problem? Thanks.
Hi all,
I've been wrestling with something for quite some time, and can't seem to get anything figured out. I'd appeciate some guidance.
I have adopted a couple of different approaches, but have been unable to get any of them to yield the information I'm looking for. In essence, I want to use the output of a Reporting Service report for archiving in another database. I have attempted to use the Reporting Services web service to achieve this, but got absolutely nowhere.
Today, I have created a stored procedure which mimics the behaviour of my report and have tried to use SSIS to read the result set from this stored procedure via both a DataReader Source and an OLE DB source. The problem is that the SP takes 4 parameters, and for the life of me it seems impossible to get these parameters down to the SP in a way that SSIS can parse and generate the columns.
I've reached a dead end in terms of my own knowledge. Has anyone done anything like this before and could advise me on the best way to achieve it? Do my aims even make sense, or do I need to rethink the process of using this kind of data?
At this stage, any help would be very much appreciated. Many thanks...
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
I have an asp.net 1.1 website that uses sql server 2000 and vb.I have a bit of a dilema, when I run a stored procedure in a webpage it returns the wrong value, but if I run itin the query analyzer the correct value is returned. Dim orderHistory As nlb.OrdersDB = New nlb.OrdersDB
' Obtain Order ID from QueryString
Dim OrderID As Integer = CInt(Request.Params("ID"))
' Get the customer ID too
Dim myNewCustomerId As Integer = 0
myNewCustomerId = orderHistory.GetOrderCustomer(OrderID)
Public Function GetOrderCustomer(ByVal orderID As Integer) As Integer
' Create Instance of Connection and Command Object
Dim myConnection As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim myCommand As SqlCommand = New SqlCommand("nlbsp_OrdersCustomerID", myConnection)
' Mark the Command as a SPROC
myCommand.CommandType = CommandType.StoredProcedure
' Add Parameters to SPROC
Dim parameterOrderID As New SqlParameter("@order_id", SqlDbType.Int, 4)
parameterOrderID.Value = orderID
myCommand.Parameters.Add(parameterOrderID)
Dim parameterOrderCustID As New SqlParameter("@customer_id", SqlDbType.Int, 4)
parameterOrderCustID.Value = ParameterDirection.Output
myCommand.Parameters.Add(parameterOrderCustID)
'Open the connection and execute the Command
myConnection.Open()
myCommand.ExecuteNonQuery()
myConnection.Close()
' Return the customer_id (obtained as out paramter of SPROC)
If parameterOrderCustID.Value <> 0 Then
Return CInt(parameterOrderCustID.Value)
Else
Return 0
End If
End Function
the stored procdure is
CREATE PROCEDURE [dbo].[nlbsp_OrdersCustomerID]
(
@order_id int,
@customer_id int OUTPUT
)
AS
/* Return the customer_id from the Orders. */
SELECT
@customer_id = customer_id
FROM
nlb_Orders
WHERE
order_id = @order_id
GO
I know a particular order_id returns a value of 1. But when I run it in the webpage it always comes back as 2. Any ideas would be appreciated ThanksPete
The following query only brings back too much data in the table - there are duplicates and the lab it shows is wrong.
The problem is:
AND a.calLab = f.ID
in the Where statement.
Some equipment does not need calibration, so, a.calDueDate = 0 AND a.calLab would be NULL or 0.
tblLabs ID field has 1 - 18 (Labs) - no 0 and of course no null
I need to get the rest of the data.
Any suggestions?
Thanks.....
Zath
SELECT a.assignedID,
b.Manufacturer,
a.modelNumber,
a.serialNumber,
e.equipmentType,
a.Description,
c.Location,
d.Status,
a.modifiedDate,
a.modifiedBy,
a.Notes,
a.Picture,
f.LabName,
a.calibrationRequired,
a.calDate,
a.CalDueDate,
a.assetNumber,
a.ID
FROM tblEquipments a,
tblManufacturers b,
tblLocation c,
tblStatus d,
tblEquipment_Type e,
tblLabs f
WHERE a.manufacturer = b.manufacturerID
AND a.location = c.locationID
AND a.Status = d.statusID
AND a.EquipmentType = e.ID
AND (a.calLab = f.ID or a.calLab Is NULL or a.calLab = 0)
ORDER BY a.ID
Hello,
I have the following stored prod in SQL server:
CREATE PROC spValidateUserIdAndPassword
@UserIdvarchar(50),
@Passwordvarchar(50)
AS
SELECT tblAdvertisers.UserID, tblAdvertisers.Password
FROM tblAdvertisers
WHERE ((tblAdvertisers.UserID = @UserId) AND (tblAdvertisers.Password = @Password))
I can run it in Query Analyzer and it returns one record as it should. I want it in ASP.NET to return the amount of rows that are effected, e.g that the login is correct.
The code I have is:
public bool ValidateUserIdAndPassword(string userId, string password)
{
sqlCommand.CommandType = CommandType.StoredProcedure;
//the name of the stored procedure
sqlCommand.CommandText = "spValidateUserIdAndPassword";
SqlParameter myParam;
//add the param's to the SP
//userId information for the user
myParam = new SqlParameter("@UserId", SqlDbType.VarChar, 50);
myParam.Value = CStr(userId);
sqlCommand.Parameters.Add(myParam);
//password information for the user
myParam = new SqlParameter("@Password", SqlDbType.VarChar, 50);
myParam.Value = CStr(password);
sqlCommand.Parameters.Add(myParam);
try
{
int rows = sqlCommand.ExecuteNonQuery();
if(rows == 1)
return true;
else
return false;
}
catch(System.Exception er)
{
//for design time error checking
return false;
}
This returns -1...
Please help me
Kind Regards
KitkatRobins :-)
I have a stored procedure that return either 1 or -1 : IF EXISTS( ) BEGIN return 1 ENDELSE BEGIN return -1 ENDAnd then I try to retrieve the returned value by doing this:int value = Convert.ToInt32(command.ExecuteScalar());But the value I get is always 0. Anyone see what is wrong?
View 1 Replies View RelatedI have the following stored procedure. The good thing is I finally got the syntax to the point where it doesn't blow up, but I was under the impression the "print" statement would print my result. In this case all I get is the statement ' 1 Row Affected ' which by the way is not the answer I was expecting.
Here's the code:
'
CREATE PROCEDURE createevents
AS
declare @myvariable varchar(700)
declare @myvar varchar(700)
begin
Select @myvariable = d.id
from table1 d, table2 dc where d.class = dc.class
If @myvariable > 0
begin
Select @myvar =dp. class
from table3 dp, table2 dc
where dp.class = dc.class
If @myvariable >= 1
begin
print @myvariable + (',') + @myvar
end
end
else
begin
print @myvariable + ('is empty')
end
end
'
Thanks in advance for any help.
Pls give some samples
View 3 Replies View RelatedI am running a sproc we have developed and I am getting a -6 as a returned value.what that actually means.
View 7 Replies View RelatedI am using the following stored procedure to insert a value into the database. I am new to stored procedures so I need help. Basically this stored procedurewill only insert a value for "CustomerName" if it is not a duplicate value.
So I noticed in My C# when I call this stored procedure, a negative one "-1"is returned if the insert is not performed because of a duplicate value.
Is that correct? Should I be getting back a negative one "-1" ? You seeI thought that a Zero "0" would be returned if the insert was not performed.Not a negative one?
SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGO
CREATE PROCEDURE [dbo].[CustomerCreate]( @CustomerDescription nvarchar(100), @CustomerName nvarchar(100), @LastUpdateDate datetime, @LastUpdateUser nvarchar(32), @inserted_record smallint output)
AS
if exists (select 1 from Customer where CustomerName = @CustomerName) BEGIN
set @inserted_record = 0
END ELSE BEGIN INSERT INTO Customer ( CustomerDescription, CustomerName, Active, LastUpdateDate, LastUpdateUser ) VALUES ( @CustomerDescription, @CustomerName, @LastUpdateDate, @LastUpdateUser ) END
I have a recordset returned from a stored procedure executed in the form open event. Could this recordset append to the form's recordsource property in the form's open event in VB? if so, what's the syntax?
Private Sub Form_Open(Cancel As Integer)
dim ...
Set add_bag_results = Nothing
With add_bag_results
.ActiveConnection = CurrentProject.Connection
.CommandType = adCmdStoredProc
.CommandText = "spSampling_add_bag_results"
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
'.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, rs_add_bag_results(1))
.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, lot_n)
..
Set rs_add_bag_results = .Execute
End With
Me.RecordSource = rs_add_bag_results ?
Thanks!
Hello,
I am struggling with this, having read many msdn articles and posts I am non the wiser. I have a sproc with an output parameter @regemail. I can call the sproc OK from my code as below, via a tableadapter. And the sproc works as desired from management studio express. I want to get the result returned in the OUTPUT parameter (NOT the Return Value) and place it in a variable. Can anyone advise how I can do this? J.
THE CODE I USE TO CALL THE SPROC
Dim tableAdapter As New DataSet1TableAdapters.RegistrationTableAdaptertableAdapter.SPVerifyUser(strRegGuid, String.Empty)
THE STORED PROCEDURECREATE Proc [prs_VerifyUser
@regid uniqueidentifier,@regemail nvarchar(250) OUTPUT
ASBEGIN
IF EXISTS(SELECT RegEmail from dbo.Registration WHERE RegID = @regid)
BEGIN
SELECT @regemail = RegEmail FROM Registration WHERE RegID = @regid
Return 1
END
Return 2
END
I have 1 files, one is .sql and another is stored procedure. SQL file will call the stored procedure by passing the variables setup in the SQL file. However, everything ran well except at the end, I try to get the return value from SP to my SQL file ... which will send notification email. But, I get the following msg ... I am not sure how to fix this ... help!!! :(
Syntax error converting the varchar value 'ABC' to a column of data type int.
SQL file
======================
DECLARE @S AS VARCHAR(1000)
EXEC @S = PDT.DBO.SP_RPT 'ABC'
SELECT CONTENT = @S -- this is the value I am trying to pass as content of the email
EXEC PRODUCTION.DBO.SENDEMAIL 'xxx@hotmail.com', 'Notification', @S
======================
Stored Procedure
======================
CREATE procedure sp_RPT( @array varchar(1000) ) AS
DECLARE @content AS VARCHAR(2000)
SET @content = 'RPT: ' + @array + ' loaded successfully '
SET @array = 'ABC'RETURN CONVERT(VARCHAR(1000),@array)
GO
Stored Procedure ProblemThis is probably a simple problem but i would appreciate some help.I have a stored procedure that takes the order date time plus other information fromvarious tables but the information is being returned double:ie 4 rows are being returned instead of two. Can anyone see where i am going wrong?Many thanksMartinThis is the stored procedureALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct OD.DateCreated, O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNThese are the results that are returnedDateCreated OrderID UserID OrderTotal Sent Delivered Paid CustomerName ----------------------- ----------- ------------------------------------ ---------------- ------ --------- ------ --------------- 18/10/2006 14:49:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 14:49:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(4 row(s) returned)If I leave OD.DateCreated ie use ALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNthen there is no problem. I get:41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(2 row(s) returned)
View 2 Replies View RelatedHi,
I need to write a select query that will run all returned results through a separate stored procedure before returning them to me.
Something like....
SELECT TOP 10 userid,url,first name FROM USERS ORDER by NEWID()
......and run all the selected userids through a stored procedure like.....
CREATE PROCEDURE AddUserToLog (@UserID int ) AS INSERT INTO SelectedUsers (UserID,SelectedOn) VALUES (@UserID,getdate())
Can anyone help me to get these working togethsr in the same qurey?
Thanks
In my ASP page, when I select an option from the drop down list, it has to get the records from the database stored procedure. There are around 60,000 records to be fetched. It throws an exception when I select this option. I think the application times out due to the large number of records. Could some tell me how to limit the number of rows to be returned to avoid this problem. Thanks.
Query
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))' + @Criteria + ' AND (number IN (SELECT DISTINCT ph1.number FROM Collect2000.dbo.payhistory ph1 LEFT JOIN Collect2000.dbo.payhistory ph2 ON ph1.UID = ph2.ReverseOfUID WHERE (((ph1.batchtype = ''PU'') OR (ph1.batchtype = ''PC'')) AND ph2.ReverseOfUID IS NULL)) OR code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryPaidPaymentsT1 = 1))'
Greetings
I have a SQL Server stored procedure that performs several queries and therefore returns several "result sets" at any one time.
Wiring it up via ADO.NET I populate a DataSet with a number of items in the Tables collection - which is great - and I can give each item a name for identification purposes once the DataSet is populated.
But I'd like to know if there is some way I can set the names of each result set *within the text of the stored procedure*, i.e. before the DataSet gets populated.
Any help greatly appreciated.
Stuart
I have a novice question. How does one suppress result sets returned from a stored procedure?
I have created a procedure which makes use of multiple stored procedures . The purpose of this procedure (lets call it procA), is to count the rows returned from other procedures. The €œOther€? procedures will return rows having an unknown number of columns. I would like to limit any changes which may be needed to be made to the €œOther€? procs.
Once procA has collected all of the information (@@rowcount) from the inner procedures, then it will return a result set having several columns €“ mainly the subProcedure name and number of rows returned.
The purpose of procA is to query several subsystems and identify which ones need attention.
Cursor While Loop
exec @ProcName @ObjectName,@userID,@syncDate
set @recs = @@rowcount;
My c# program calls the sp as follows:
cmd = DataUtility.GetSQLCommand();
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "FetchAdminData";
cmd.Parameters.AddWithValue("@userID", userAlias);
cmd.Parameters.AddWithValue("@adminDate",userDate);
reader = cmd.ExecuteReader();
I do not wish to iterate over each resultSet when I am only interested in the last one. Any suggestions?
Hey Guys. I’m having a little trouble and was wondering if you could help me out. I’m trying to create a custom paging control, so I create a stored procedure that returns the appropriate records as well as the total amount of records. And that works fine. What I’m having problems with is reading the data from the second select statement within the code. Anyone have any idea on how to do this? Also.. how can I check how many tables were returned?
Here's my code. I'm trying to keep it very generic so I can send it any sql statement:public DataTable connect(string sql)
{
DataTable dt = new DataTable();
SqlConnection SqlCon = new System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings["MyDB"].ToString());
SqlDataAdapter SqlCmd = new SqlDataAdapter(sql, SqlCon);
System.Data.DataSet ds = new System.Data.DataSet();
SqlCmd.Fill(ds);
dt = ds.Tables[0];
//Here's where I don't know how to access the second select statement
return dt;
} Here's my stored procedure:
ALTER PROCEDURE dbo.MyStoredProcedure
(
@Page int,
@AmountPerPage int,
@TotalRecords int output
)
AS
WITH MyTable AS
(
Select *, ROW_NUMBER() OVER(ORDER BY ID Desc) as RowNum
From Table
where Deleted <> 1
)
select * from MyTable
WHERE RowNum > (((@Page-1)*@AmountPerPage)) and RowNum < ((@Page*@AmountPerPage)+1);
Select @TotalRecords = COUNT(*)
from Table
where Deleted <> 1
RETURN
Thanks
I have a stored procedure which returns a result set as follows:
(Headers)Total,WV1,WV2,WV3,WV4,WV5.....
(Example data) "Some total name",1,2,3,4,5.....
The WV1, WV2, WV3 column names will be different depending on parameters passed to the stored procedure. In other words, the column names or number of columns aren't fixed (apart from "Total").
What I would like to be able to do is to just force SSRS to use the column headers supplied by the stored procedure as the column names in the report.
Can anyone tell me what the heck this is trying to tell me. I have 3 datasets I'm working with so there are errors for each here:
[rsMissingFieldInDataSet] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Revenue_By_Client€™ contains a definition for the Field €˜Branch€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜Main_Dataset_AZ€™ contains a definition for the Field €˜PostedAmount_InHouse€™. The data extension returned an error during reading the field.
Preview complete -- 0 errors, 4 warnings
Hi
I have written a stored procedure that returns 8 tables.
When I try to design a server report based on this stored procedure, reporting services only recognises the first table and not the other 7 tables.
I am using SQL Server 2005 and Visual Studio 2005.
Thank you in advance
Jav
Hi,
I'm reading values from a named range within an Excel spreadsheet using the Excel ODBC driver. If I ask for all columns within a range, using e.g. select * from 'named range', does the driver ensure that the returned rowset has the same column and row ordering as in the spreadsheet? In other words, if a named range on a spreadsheet is the block of cells:
name age
richard 54
jemima 27
I want to make sure that my returned rowset is not going to be:
age name
jemima 27
richard 54
I know that proper databases do not guarantee the order of returned values (unless you specify it) but since Excel is a fixed view of data I was hoping that a returned rowset of values would retain their spreadsheet ordering.
Thanks,
aionaut
Here is the scenario,
I have 2 stored procedures, SP1 and SP2
SP1 has the following code:
declare @tmp as varchar(300)
set @tmp = 'SELECT * FROM
OPENROWSET ( ''SQLOLEDB'', ''SERVER=.;Trusted_Connection=yes'',
''SET FMTONLY OFF EXEC ' + db_name() + '..StoredProcedure'' )'
EXEC (@tmp)
SP2 has the following code:
SELECT *
FROM SP1 (which won't work because SP1 is a stored procedure. A view, a table valued function, or a temporary table must be used for this)
Views - can't use a view because they don't allow dynamic sql and the db_name() in the OPENROWSET function must be used.
Temp Tables - can't use these because it would cause a large hit on system performance due to the frequency SP2 and others like it will be used.
Functions - My last resort is to use a table valued function as shown:
FUNCTION MyFunction
( )
RETURNS @retTable
(
@Field1 int,
@Field2 varchar(50)
)
AS
BEGIN
-- the problem here is that I need to call SP1 and assign it's resulting data into the
-- @retTable variable
-- this statement is incorrect, but it's meaning is my goal
INSERT @retTableSELECT *FROM SP1
RETURN
END
Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
I'm using a stored procedure from sqlserver 2005 to get columns for my report. But, I don't know how to capture the returned values from the procedure and show it on the report.
Please advice.