I am performing a Rebiuld of the Master database using the REBUILDM utility on a SQL 2000 SP3 database which is clustered.
The utility starts off correclty, copying the correct MDF and LDF files to the hard drive, and the configuration bar goes across the screen 4 times, before giving the following error "Rebuild master failed with error -1".
I can't find anything on microsoft. I followed KB-298568 to perform this process, but the SQL Service will now not start as it cannot find the master, as it did not get rebuilt properly.
I have included screen shots of the error, in the zipped up word doc.
Looks like I'm screwed. Next problem - can you rebuild the master.mdf without the mastlog.ldf and how? Also, on an active/active SQL server setup, how would you re-install Node 1?
I've been in support for over ten years, but have had minimal exposure to SQL. I have a client who is running SQL 2005 (as part of SBS Premium), who experienced a server crash due to the database "administrator" filling up the C: drive with manual SQL backups.
Anyway, if I go into SQL Management Studio and try to pull up properties of any database I get a "cannot show requested dialog" error. The only other issue that I've found is that a maintenance plan doesn't quite work correctly -- It will backup their database, but not delete old copies off the hard drive. Otherwise, SQL seems to be running okay.
I have come to the conclusion that I probably need to rebuild the master database. I have tried restoring the master database from a version prior to the crash, but I still have the same issue. I believe the rebuild should be fairly easy, but just don't have a full understanding of what it will affect. They have one custom application that uses a single SQL database and very little security customization (the custom application uses one Windows AD account to access the database).
Basically, I'm wondering:
1. Can someone summarize what is contained in the master database 2. I assume that I'm looking at downtime on their custom application/database - Would this be correct? 3. Will this affect their database at all? 4. How long does the database rebuild process take? 5. I understand that in SQL 2005, the rebuild process it part of the setup on the CD. If the problem is with SQL application files themselves, will this process restore any corrupt program files?
I'm using SQL SERVER 2000 and in the process of establishing recoveryguide.Tried to rebuild master using rebuildm.exe but the "Configuring Server"never ending. Then I tried to copy original databases from SQLServerInstallation CD to hard disk as the "Browse for folder", but gave thesame problem. Need advice what need to be done.
I need to rebuild a corrupted/deleted master database in SQL Server 2005 SP2.
When I run setup.exe from the install media as directed by SQL Books Online, I get to the point where it says the instance is a later version and setup cannot continue. Rerunning the SP2 installer, the instances cannot be selected for upgrade (and it ignores the command line options for the original installer).
How to proceed?
Also, it would seem simpler to have a detach, copy and attach the system databases process, rather than run the installer. (I realize you can stop the instance, copy files, restart the instance; but that's not "high availability".)
I tried to test Rebuildm.exe on my local server 1. Stoped Sql 2. Renamed master.mdf to master.mdf_old 3. Tried to start Sql (Does start of couse) 4. Run Rebuildm.exe ... and "Gonfigurating Sql server" message goes forever (I was waiting 1 1/2 hrs ... progress bar was running )
If one is regularly taking backups of system databases, when does it become necessary to rebuild the master database. I am looking for a situation where rebuilding the master is preferred to restoring it from backup.
Hi, I'm testing my recovery on a sql server 2005 database. The server has been restored, which includes the OS and sql server 2005 installation (binaries, full tape restore). The tape restore didn't put back the master.mdf and other .mdf files (can't be backed up when open), so I need to rebuild the master and do a database recovery on it and the other supporting databases (yes, I have database backups). I have installed the sql 2005 setup CDs in a folder and run the following command to rebuild the master, but nothing happens, it pauses for a couple of minutes before it returns to the prompt, but it does not put and new master.mdf files in the folder and I can't start the service in single user mode. "start /wait setup.exe /qn INSTANCENAME=MSSQLSERVER REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=mypassword" Anybody have any procedures for a full sql server 2005 recovery or suggestions on this, please post.
In SQL Server 2005 Express, how do I rebuild the master database?
I am receiving the following error messages.
The log scan number (888:136:1) passed to log scan in database 'master' is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication. Otherwise, restore from backup if the problem results in a failure during startup.
AND
Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
I tried going through Add and Remove Programs. It did not recognize anything wrong. It did nothing.
I tried 'setup' from the install media. It said to go to 'Add and Remove Programs.'
In SQL Server 2005 Express, how do I rebuild the master database?
I'm trying to rebuild my master database for sql server 2000. The process of rebuilding stared fine. But it is almost 4 hours since it got started. Performing it on a test system. Got doubtful and started the same on another test system. Issue is same and it is almost 2 hours. The Db size is less than 100 MB in both cases. IS IT NORMAL? I've tried the same for SQL SERVER 2005 and it got finished in couple of minutes. Please advise.
How I can rebuild master db to change the Code Page of the current SQL7 , to convert my SQL7 from code page 850 to 1252 ? I have huge data in the old code page dbs , Does rebuild the master db mean reinsert the data again ?
Complete: SetPackageInstallStateAction at: 2007/9/23 7:33:43, returned true Running: DeterminePackageTransformsAction at: 2007/9/23 7:33:43 Complete: DeterminePackageTransformsAction at: 2007/9/23 7:33:43, returned true Running: ValidateSetupPropertiesAction at: 2007/9/23 7:33:43 Complete: ValidateSetupPropertiesAction at: 2007/9/23 7:33:43, returned true Running: OpenPipeAction at: 2007/9/23 7:33:43 Complete: OpenPipeAction at: 2007/9/23 7:33:43, returned false Error: Action "OpenPipeAction" failed during execution. Running: CreatePipeAction at: 2007/9/23 7:33:43 Complete: CreatePipeAction at: 2007/9/23 7:33:43, returned true Running: RunRemoteSetupAction at: 2007/9/23 7:33:43 <Func Name='CProcessCtrl::GetInstallPath'> <EndFunc Name='CProcessCtrl::GetInstallPath' Return='0' GetLastError='0'> Error: 0x80070050 TaskScheduler::NewWorkItem for SQL Server Remote Setup Error: 0x80070005 TaskSchedulerWorkItem failed to save the task [SQL Server Remote Setup ] Complete: RunRemoteSetupAction at: 2007/9/23 7:33:43, returned false Error: Action "RunRemoteSetupAction" failed during execution. Error information reported during run: Attempting to determine log files for remote install. Connection to remote computer's scheduler service. Creating new workitem. Deleting existing work item and trying again... Starting remote setup onSQL1N2 Error: 80070005 Access is denied. Running: PopulateMutatorDbAction at: 2007/9/23 7:33:43 Complete: PopulateMutatorDbAction at: 2007/9/23 7:33:43, returned true Running: GenerateRequestsAction at: 2007/9/23 7:33:43 SQL_Engine = 3 SQL_Data_Files = -1 SQL_Replication = -1 SQL_FullText = -1 SQL_SharedTools = -1 SQL_BC_DEP = -1 Analysis_Server = -1 AnalysisDataFiles = -1 AnalysisSharedTools = -1 RS_Server = -1 RS_Web_Interface = -1 RS_SharedTools = -1 Notification_Services = -1 NS_Engine = -1 NS_Client = -1 SQL_DTS = -1 Client_Components = -1 Connectivity = -1 SQL_Tools90 = -1 SQL_WarehouseDevWorkbench = -1 SDK = -1 SQLXML = -1 Tools_Legacy = -1 TOOLS_BC_DEP = -1 SQL_SSMSEE = -1 SQL_Documentation = -1 SQL_BooksOnline = -1 SQL_DatabaseSamples = -1 SQL_AdventureWorksSamples = -1 SQL_AdventureWorksDWSamples = -1 SQL_AdventureWorksASSamples = -1 SQL_Samples = -1 Complete: GenerateRequestsAction at: 2007/9/23 7:33:44, returned true Running: CreateProgressWindowAction at: 2007/9/23 7:33:44 Complete: CreateProgressWindowAction at: 2007/9/23 7:33:44, returned false Error: Action "CreateProgressWindowAction" failed during execution. Running: ScheduleActionAction at: 2007/9/23 7:33:44 Complete: ScheduleActionAction at: 2007/9/23 7:33:45, returned true Skipped: InstallASAction.11 Waiting for actions from remote setup(s) Breaking wait state and aborting package due to cancel code received: 1602 Remote setup(s) are ready Notify package action is determined: 1602 Error Code: 0x800700e9 (233) Windows Error Text: No process is on the other end of the pipe.
Source File Name: remotemessageliboverlappedpipelistener.cpp Compiler Timestamp: Sat Oct 7 09:43:54 2006 Function Name: sqls:verlappedPipeListener::writePipe Source Line Number: 294
Notification failed to send. ---- Context ----------------------------------------------- sqls::HostSetupPackageInstallerSynch::installAction
Removing machine from list of targets to sync. Skipped: Action "InstallASAction.11" was not run. Information reported during analysis: All installs have been cancelled, so package: "sqlsupport", referred by package: "as", will not be installed. Skipped: InstallASAction.18 Skipped: Action "InstallASAction.18" was not run. Information reported during analysis: All installs have been cancelled, so package: "owc11", referred by package: "as", will not be installed. Skipped: InstallASAction.22 Skipped: Action "InstallASAction.22" was not run. Information reported during analysis: All installs have been cancelled, so package: "bcRedist", referred by package: "as", will not be installed. Skipped: InstallASAction.9 Skipped: Action "InstallASAction.9" was not run. Information reported during analysis: All installs have been cancelled, so package: "msxml6", referred by package: "as", will not be installed. Skipped: InstallDTSAction Skipped: Action "InstallDTSAction" was not run. Information reported during analysis: All installs have been cancelled, so package: "dts", will not be installed. Skipped: InstallDTSAction.11 Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis: All installs have been cancelled, so package: "sqlsupport", referred by package: "dts", will not be installed. Skipped: InstallDTSAction.12 Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis: All installs have been cancelled, so package: "sqlncli", referred by package: "dts", will not be installed. Skipped: InstallDTSAction.18 Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis: All installs have been cancelled, so package: "owc11", referred by package: "dts", will not be installed. Skipped: InstallDTSAction.22 Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis: All installs have been cancelled, so package: "bcRedist", referred by package: "dts", will not be installed. Skipped: InstallDTSAction.9 Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis: All installs have been cancelled, so package: "msxml6", referred by package: "dts", will not be installed. Skipped: InstallNSAction Skipped: Action "InstallNSAction" was not run. Information reported during analysis: All installs have been cancelled, so package: "ns", will not be installed. Skipped: InstallNSAction.11 Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis: All installs have been cancelled, so package: "sqlsupport", referred by package: "ns", will not be installed. Skipped: InstallNSAction.12 Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis: All installs have been cancelled, so package: "sqlncli", referred by package: "ns", will not be installed. Skipped: InstallNSAction.18 Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis: All installs have been cancelled, so package: "owc11", referred by package: "ns", will not be installed. Skipped: InstallNSAction.22 Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis: All installs have been cancelled, so package: "bcRedist", referred by package: "ns", will not be installed. Skipped: InstallNSAction.9 Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis: All installs have been cancelled, so package: "msxml6", referred by package: "ns", will not be installed. Skipped: InstallRSAction.11 Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis: All installs have been cancelled, so package: "sqlsupport", referred by package: "rs", will not be installed. Skipped: InstallRSAction.18 Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis: All installs have been cancelled, so package: "owc11", referred by package: "rs", will not be installed. Skipped: InstallRSAction.22 Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis: All installs have been cancelled, so package: "bcRedist", referred by package: "rs", will not be installed. Skipped: InstallSqlAction Clustered feature detected: SQL_Engine Clustered feature detected: SQL_FullText Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.3042.0 Windows Error Text: User cancelled installation.
Source File Name: sqlchainingsqlchainingactions.cpp Compiler Timestamp: Thu Nov 16 20:32:00 2006 Function Name: sqls::ReportChainingResults:erform Source Line Number: 3667
---- Context ----------------------------------------------- sqls::RunRemoteSetupAction::waitForRemoteSetupComplete king package: "patchRS2000" as failed due to cancel code received from cancel source: 1602 sqls Delay load of action "UploadDrWatsonLogAction" returned nothing. No action will occur as a result. Message pump returning: 1602
We have a script running everyday for rebuild and re-organisation of indexes. But, somehow its getting failed. Attached script for your consideration. There is no database name with amoperations. There is table called DatabaseObjectAudit but it exist on master db.
Message:
-->Start Index Maint -> Gathering fragmentation information (can take a while!) -> Gathering COMPLETE : Total of 43 databases were found. -> Gathering COMPLETE : Total of 1622 indexes were found.
We have a maintenance plan running everyday for rebuild and re-organisation of indexes. But, somehow its getting failed. Here is the script that we are running for rebuild or re-org.
/* Script to handle index maintenance Tuning constants are set in-line current values are; SET @MinFragmentation SET @MaxFragmentation SET @TrivialPageCount
My site crashed, so I had to rebuild the Project Site.
I used the SharePoint products and technologies configuration wizard to disconnect from the server farm (only actually running on the single server).
I then reran SharePoint products and technologies configuration wizard to setup the site.
Configured the Project Service and attached to the existing dB's.
Previously, I used the url http://servername.domain.forest/PWA/default.aspx .
Now when I attempt the use the same URL, I get the following error:
"An unexpected error has occurred"
I have tested this one 3 servers now and I receive the exact same result. Is there a path I should apply to the servers in order to allow fully qualified server names after a reinstall of the system?
I have a requirement to only rebuild the Clustered Indexes in the table ignoring the non clustered indexes as those are taken care of by the Clustered indexes.
In order to do that, I have taken the records based on the fragmentation %.
But unable to come up with a logic to only consider rebuilding the clustered indexes in the table.
Hi Gurus Sorry to rake up this issue again.we repaired this master by dbcc checkdb and now it is fine.What is this going on?do i have the chance that this willstillgodown as mentioned by paul . Regards Nitin
Gurus when i run checkdb i get this error "Database 'master' consistency errors in sysobjects, sysindexes, syscolumns, or systypes prevent further CHECKDB processing." What can be the cause?Can i fix this with repair option of check db? Please advice
select @UServer = sd_value from Msysdata Where SD_Property = 'UpDateServer' select @Common = sd_value from Msysdata WHERE SD_Property = 'CommonDir' select @DataUpdates = sd_Value from Msysdata WHERE SD_Property = 'DataUpdate'
Set @UServer = @UServer + 'D$'
SET @Msg = 'Truncate tri_ active files' EXEC MARS_SYS.dbo.sp_WriteLog @ClientAbbrev, 'UpdateMgr', @Msg, @FileDate, @SessionId
Declare ActiveFile Cursor For Select Ip_FileName, Ip_Active from tbl_InputFiles where Ip_Active = 'Y'
Open ActiveFile Fetch Next From ActiveFile Into @Ip_FileName, @Ip_Active
While @@Fetch_Status = 0 Begin
Exec('truncate table tri_'+ @Ip_FileName) Set @FullFileName = @Ip_Filename + '.csv'
set @UServer = '' set @Common = '' set @triFileName = 'tri_' + @Ip_FileName
In sys.transmission_queue is showing the transmission_status with error. "The session keys for this conversation could not be created or accessed. The database master key is required for this operation."
But I do have a Master Key in the database, and many External Assemblies depend on that. Is there an option to use the existing master key. How to use the existing key ?
I am trying to move the system database master database and mssqlresource database on SQL Server 2005.
I am going according to the doc's . And I am logging in as single user mode : NET START MSSQLSERVER /f /T3608 and when I try to login into sqlcmd or Management studio , I get the error:
SQL Error 18461 , can not login in more than one administrator server in single user mode.
For the managment studio , I close the object explorer as it is taken as one connection and click the new query with existing connection. But it throws me the same error. When I try to enter into sqlcmd , it throws me the same error.
What can I do here.. IS there anything I am missing.
Login failed for user 'OFFICIALPROJECTAdministrator'. Reason: Server is in single user mode. Only one administrator can connect at this time. (Microsoft SQL Server, Error: 18461)
I have a SP SQL server that uses Handshake for the web parts. I am getting an error on SharePoint about 'An error occurred during Service Master Key Decryption' inside the web parts of the page, everything else comes up, from what I have researched MS says go under SQL Configuration Manager and change the service account. Is this the correct course of action for this type of error? I am just having a hard time believing that changing the engines service account will stop this issue, this account is used on several SQL server with no issues.
I receive this error "Setup was unable to load the master information file' when I lanch Control Panel, Add/Remove Programs, Add/Remove Windows Components.
I am trying the assign the models to the user in the user management page. But when I try to expand the + symbol next to the model and open the entities, I get the error that the object reference is not set for a object server instance.
Step 1. First I am filtering the Sales Order information and inserting it in my Sales Orders table. Step 2.Then I am filtering the details from the sales Order and inserting them in the respective table.
My Problem is that the Sales Order File does not contain the Sales Order key (ID), this is generated by the SQL Server. How can get it in order to use it in the second step? I need it because it is a foreign key in the details table.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
I am getting ErrorCode 8 while loading the data from stage to model. I have checked my error view it states that "Member Code is Inactive".
Initially I have loaded same set of data in Model from MDS Stage table but then deleted with ImportType = 5 which removed all the data from the MDM model.
Now i want to load it back but its giving the Error Code 8 .. Before loading the same data i have changed the stage table Importtype to 2 and Importstatusid to 0.
I'm new to SQL and need help with a query. Not sure if this is the right place.
I have 2 tables, one MASTER and one DETAIL.
The MASTER table has a masterID, name and the DETAIL table has a detailID, masterID, and value columns.
I want to return a populated MASTER table with entries based on the DETAIL.value.
SELECT MASTER.* FROM MASTER WHERE DETAIL.value > 3
This is a simplified version of my problem. I can't figure out how to set the relationship between MASTER.masterID and DETAIL.masterID. If I do an INNER JOIN, the number of results are based on the number of DETAIL entries. I only want one entry per MASTER entry.
