Received Error Code 0x80040e57
Mar 8, 2007
I've check out that this error code says: A literal value in the command overflowed the range of the type of the associated column.
I received the error message when inserting large block data into a image column in SQL Server 2000. As I know, image support max 2G data to store. I use the C code function below to insert the data:
DBCreateParamBinary (hStmt, "", DB_PARAM_INPUT,&(pMonitorDBData->SampDat),NUM_SAMPLES_SETDBMONITOR*sizeof(float64) );
in which, the NUM_SAMPLES_SETDBMONITOR*sizeof(float64) stands for the data length by byte. and ,&(pMonitorDBData->SampDat) stands for the pointer address of the data block. (pls note: NUM_SAMPLES_SETDBMONITOR*sizeof(float64) = 4096*8=32768 bytes)
In addation, I've tried to use certain numbers instead of "NUM_SAMPLES_SETDBMONITOR*sizeof(float64)", and I found I could only set this value up to 8003 bytes. If 8003 above, this error message would be received.
What should I do with this issue? Any help?
Thanks a million!
View 1 Replies
ADVERTISEMENT
Jul 26, 2002
when i tried to run a DTS which transfer bulk data between 2 SQL servers, i got following error message:
================================================== ============
Error: -2147467259 (80004005); Provider Error: 4815 (12CF)
Error string: Received invalid column length from bcp client.
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
================================================== ===========
if anybody has encounter the same problem before? after testing, i think it's
must related with network traffic problem. but i can not figure out how to solve it.
View 2 Replies
View Related
Oct 11, 2004
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.
View 4 Replies
View Related
Oct 23, 2005
Hi,I've developed an ASP.NET application which uses MS-SQL Server 2000 as abackend. But as the site hits increase SQL server reponse becomes lower.At some stage after that SQL Server gets automativally stopped bringingcomplete web-application down to halt. i checked the Windows 2000 EventLogs and found several error logs indicating folloowing line."SQL Server 2000 Error 17805 Invalid buffer received from client.". Butno errors on UI side. What may be the actual problem.In storedproceduresor at some other place?Awaiting favourble reply.Regards,Amit*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Jul 23, 2005
Hi,I am attempting a bulk copy from a c program into SQL Server 2000 usingDBLib in freeTDS 0.63 RC11 (gcc 3.4.3, RH 9). I am getting an error messagethat I cannot find any documentation on.The server is sending back the following: "Received invalid row length 2from bcp client. Minimum row size is 4."I know the row is longer 2 bytes (see below). Once this happened I created atest table and C program. See below. Anyone with any ideas?ThanksProgram output ---------------->$ ./test_bcpbcp'ing This is a test with a length of 14sentMsg 4807, Level 16, State 1Server 'CENTIVIA_10', Line 1Received invalid row length 2 from bcp client. Minimum row size is 4.done<----------------------Table ddl --------------------->CREATE TABLE [xxx] ([col2] [varchar] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY]GO<------------------------------------Compiled using gcc ------------------->gcc -g -I/home/test_user/dev/freetds-0.63RC11/include -Wall -Wno-strict-aliasing-g -O2 -c -o test_bcp.o test_bcp.cgcc -o test_bcp test_bcp.o -L/home/test_user/lib -lsybdb<----------------------------------program source (included the msg and error handlercode) -------------------------->#include <string.h>#include <stdio.h>#include <stdlib.h>#include <sqldb.h>intsyb_msg_handler(DBPROCESS * dbproc, DBINT msgno, int msgstate, int severity,char *msgtext, char *srvname, char *procname, int line){char var_value[31];int i;char *c;if (msgno == 5701 || /* database context change */msgno == 5703 || /* language changed */msgno == 5704) { /* charset changed */if (msgtext != NULL && (c = strchr(msgtext, ''')) != NULL){i = 0;for (++c; i <= 30 && *c != ' ' && *c != '''; ++c)var_value[i++] = *c;var_value[i] = ' ';}return 0;}if (severity >= 0 || msgno == 0) {if (msgno > 0 && severity > 0) {fprintf(stdout, "Msg %d, Level %d, State %d",(int) msgno, (int) severity, (int) msgstate);fprintf(stdout, "Server '%s'", srvname);if (procname != NULL && *procname != ' ')fprintf(stdout, ", Procedure '%s'",procname);if (line > 0)fprintf(stdout, ", Line %d", line);fprintf(stdout, "");fprintf(stdout, "%s", msgtext);fflush(stdout);} else {fprintf(stdout, "%s", msgtext);fflush(stdout);}}return 0;}intsyb_err_handler(DBPROCESS * dbproc, int severity, int dberr, int oserr, char*dberrstr, char *oserrstr){if (dberr == SYBESMSG)return INT_CANCEL;env_set(g_env, "batch_failcount", "1");fprintf(stdout,"DB-LIBRARY error (severity %d, dberr %d, oserr %d, dberrstr%s, oserrstr %s):",severity, dberr, oserr, dberrstr ? dberrstr : "(null)",oserrstr ? oserrstr : "(null)");fflush(stdout);if ((dbproc == NULL) || DBDEAD(dbproc)) {if (dberr != SYBECOFL) {exit(255);}}return INT_CANCEL;}int main(int argc, char *argv[]){DBPROCESS *dbproc;LOGINREC *login;DBINT test_int = 99999999;DBCHAR test_char[32] = "This is a test";dbinit();dberrhandle(syb_err_handler);dbmsghandle(syb_msg_handler);login = dblogin();DBSETLPWD(login, "audit");DBSETLUSER(login, "audit");dbproc = dbopen(login, "192.168.58.1");dbuse(dbproc, "audit_dev");bcp_init(dbproc,"xxx", (BYTE *)NULL, (BYTE *)NULL, DB_IN);printf("bcp'ing %s with a length of%d",test_char,strlen(test_char));//ii = bcp_bind(dbproc, (BYTE *) &test_int, 0, -1, NULL, 0, SYBINT4,1 );//printf("bound %d",ii;bcp_bind(dbproc, test_char, 0, strlen(test_char), NULL, 0, SYBCHAR,1 );bcp_sendrow(dbproc);printf("sent");bcp_batch(dbproc);printf("done");return 0;}<---------------------------------
View 1 Replies
View Related
Nov 6, 2007
I've SQL Server Reporting Services 2005 configured on my system, but now I'm NOT Able to start the report server. I get this error on http://<serverurl>/Reports/Home.aspx:
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) (rsRPCError) Get Online Help
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)
I don't want to loose any data. Please help me resolving this error.
FYI, I've modified the SQL Reporting Services account LogOnAs info, in Properties of "SQL Server Reporting Services (MSSQLSERVER)" Service, in Windows Service Managment.
Earlier I had .useraccount as username, I modified it to domainnameuseraccount. And then suddenlt everything broke for reporting server.
View 4 Replies
View Related
Jan 28, 2008
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
View 4 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Jul 20, 2005
I have a client using SQL 2k, SP2 (due application requirements, SP3 is notan option - the application vendor will not specify why). We are receiving:[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL ServerConnection BrokenThere doesn't appear to be any rhyme or reason as to why this is happening.And...it shows it's ugly head at random places during execution. Has anyoneexperienced this also, or have any ideas on what to look for? I have seennumerous suggestions stating to upgrade from MDAC 2.6 to 2.7. At thispoint, I'm not sure if thats an option based on the vendors application(which by the way they no longer support!).Any ideas will be greatly appreciated.Greg
View 1 Replies
View Related
May 21, 2007
Hello,
when is seemd that everything works some weird behaviours comes out.
I try to summarize the problem without to post the complete code.
Service Broker is set to have a dialog between two databases on the same SQL Server instance.
The Initiator queue has retention=on and there is an activation SP to handle errors and Target's end dialog message.
The Target queue has retention=off, MAX_READER =1 and there is an activation SP to receive the message (WAIT FOR (RECEIVE (1) ...), TIMEOUT 30000 and do something with this message (sample insert into a DB).
The conversation has a Timeout Dialog to end the dialog after a while.
The problem that the message is constantly processed. The Process doens't stop is I end the dialof after the processing either.
n.b.the Receive is within a Transation that I commit at the end.
some other informations that in the meanwhile I found out :
This was my complete WAIT FOR(RECEIVE :
WAITFOR ( RECEIVE top(1) -- just handle one message at a time
@message_type=message_type_id, --the type of message received
@messagetypename=message_type_name,
@message_body=message_body, -- the message contents
@dialog = conversation_handle -- the identifier of the dialog this message was received on
FROM [TargetQueue]
), timeout 1000;
if (@@ROWCOUNT = 0)
BEGIN
COMMIT;
BREAK;
END
IF I delet TIMEOUT 1000, everything works as expected ...
Inside if (@@ROWCOUNT = 0)BEGIN..END I wrote also an Insert into a table to see wheter the end of the queue was reached but this insert never occurs (neither with not without timeout)
I'm happy that it works what if this is the solution, it make no sense to me!
Any ideas?
Thank you!
M.B.
Thank you very much
M.B.
View 9 Replies
View Related
Apr 10, 2008
Hi All
I am sending two messages across servers with in the same transaction but they are received in the incorrect sequence.
Message1 from service1 to service2 on contract1 with RELATED_CONVERSATION_GROUP = 'xxxxxxx'
Message2 from service1 to service2 on contract2 with RELATED_CONVERSATION_GROUP = 'xxxxxxx'
Message2 is always received first at the target and is causing our process to fail.
When I check the service2 definition contract2 is specified first. Can this be the issue? I tried to change this order by dropping the contracts from the service and adding again but it still keeps the same order.
Please help.
View 4 Replies
View Related
Jan 29, 2007
From SQL Management Studion I go to Management > Database Mail and I am trying to send a test email but I never receive anything. I checked my SMTP Mail Server Logs and I saw no entry of my test email.
I also I checked my SQL Database Mail Logs and everything seems fine, no errors are reported.
The msdb.dbo.sysmail_allitems shows my email status as "sent".
So what am I missing? What steps would you recommend for troubleshooting my problem?
Thank you,
Ric
View 7 Replies
View Related
Mar 30, 2012
I developed a mass mailing tools, but all mails received in junk and spam folder
I use an store procedure 'sp_send_dbmail' which is by default in sql server, when i send an testing mail using object explorer ->Database mail -> right click -> send testing mails, then this mail received in inbox, but when i call 'sp_send_dbmail' this procedure using job with 2 min intervals then mails received in junk or spam folder of recipients..
I configured correctly all information of smtp details ip address...
Why mails r received as junk or spam folder ??
View 2 Replies
View Related
Apr 18, 2012
i got stuck, while sending emails using store procedure sp_send_dbmail, when i m sending simple text format then mail received in inbox but whenever i m trying to send an html format emails with links of images and href tags mails received in spam.. i store procedure is given below..
DECLARE @tableHTML varchar ;
SET @tableHTML =
'<table border="1" >
<tr>
<td width="187"><a href="http://printbooth.in/product-list.php?cat_id=16&subcat_id=265" target="_blank"><img
[code]...
View 1 Replies
View Related
Aug 6, 2006
Every time I try to edit a Control flow or Data flow task I am getting the following error. My toolbox options are all grayed out also.
TITLE: Microsoft Visual Studio
------------------------------
The service System.Windows.Forms.Design.IUIService could not be located.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=UnableToLocateService&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any help is appreciated
Gulden
View 4 Replies
View Related
Jul 26, 2007
I have 2 DropDownList, the first one to display the product category and the other one to display the products based on the selected category. However, when I run code I received the following error message: Input string was not in a correct format.
Please find the code below.
Thanks,
Andy.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server"><title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
DataTextField="Name" DataValueField="Name">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Assignment2ConnectionString %>"
SelectCommand="SELECT [Name] FROM [Category]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList2" runat="server" DataSourceID="SqlDataSource2"
DataTextField="Name" DataValueField="Name">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:Assignment2ConnectionString %>"
SelectCommand="SELECT [Name] FROM [Product] WHERE ([CategoryID] = @CategoryID2)">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="CategoryID2" PropertyName="SelectedValue"
Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
</div></form>
</body>
</html>
View 1 Replies
View Related
Jun 25, 2014
I am actually very new to SQL databases, I have received an .MDF and .LDF for a database of size 50 GB...
I need to create or attach these files to a new database and extract some columns then convert them to .text or .csv...
View 5 Replies
View Related
Apr 24, 2007
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
View 8 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Jul 13, 2006
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
View 1 Replies
View Related
Jul 20, 2005
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies
View Related
Feb 29, 2008
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
View 10 Replies
View Related
May 10, 2007
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
View 6 Replies
View Related
May 3, 2008
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
View 13 Replies
View Related
Jul 28, 2006
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
View 8 Replies
View Related
Jan 7, 2008
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
View 12 Replies
View Related
Dec 20, 2006
Hi,
I just installed SQL Server 2005 on Windows Vista.
I am getting an error "An unknown error occurred in the WMI
provider. Error Code 8000000A" when connecting to a web server. The
reporting services is running. Is there any other installation that is
missing. Please help.
View 4 Replies
View Related
Mar 22, 2006
Hello everyone.
I am trying to install Project Server, and i'm having issues with sharepoint, and connecting to SQL:
dataserver is running sbs2003 sql2003 and analsys services.
server2 is running server2003 is to be the application server for project.
ProjectDb is the database that i have setup in sql.
username is the account that can control everything as administrer.
in Sharepoint is asks for the database server: <<dataserver>>
SQL Server database name: <<ProjectDb>>
I'm using windoes authentication and then i click ok, and get the error message.
I've also see the error message can not find the SQL Server, and access denied. Under ODBC i have installed the sql server information under System DSN.
Any help would be great.
Thanks
Everett Buel
View 3 Replies
View Related
Dec 19, 2007
Hi All,
We use Cisco Call Manager 4.1(3), We use RTMT Tool to monitor our devices & now Daily once i get a error message as Directory connection failed . Monitored precanned object has value of 0., can anyone tell me what could be the excat cause or how can we troubleshoot this issue or what services should we check on our call manager to overcome this error.
Thanks & Regards
Sameer P Khakhar
View 1 Replies
View Related
Jun 19, 2007
Hi,After sending a request, I would get the possible error message.Not the code @@error, nor the exact content of sysmessages, but themessage like it could be in the log file.TIA,TSalm
View 1 Replies
View Related
Aug 18, 2006
my code was working fine but i changed a few things and now i cant figure it out.
the problem is that when i click my edit button none of the items go into the listbox. i added a label to track th error and i narrowed it done to a smaller ssection. Please help
//-----------------------------------------------------------------------------
/////////////////////////////////////////////////////////////////////////////////
protected void EditButton1_Click(object sender, EventArgs e)
{
int counter = 0; //counter for inserting into array
bool Validate = checknumberValidation(TextBox1.Text.ToString());
if (Validate == false)
throw new Exception(InvalidCheckNumber + TextBox1.Text);
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//get # of checkboxes and set array size;
int x = 0;
x = SetStringArraySize(); //set x to number of checkboxes that are checked
String[] updateString = new String[x]; //create string array of size x
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//for loop that will insert update statements into array
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
if (counter == 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
if (counter > 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
counter++;
}
}
//Add items to listbox and set listbox to visible.
Panel1.Visible = true;
PanelGridView.Visible = false;
Panel2.Visible = false;
updateCount.Text = updateString.Length.ToString();
updateCheckNumber.Text = TextBox1.Text;
int q = 0;
while (q < updateString.Length)
{
ListBox1.Items.Add(updateString[q]);
q++;
}
//Label1.Text = temp.Length.ToString(); //Test print to label
}
//-----------------------------------------------------------------------------
//COMPLETE
protected int SetStringArraySize()
{
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
int count = 0;
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
count++;
}
}
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
return count;
//returns number of checkboxes that are checked
}
/////////////////////////////////////////////////////////////////////////////////
//-----------------------------------------------------------------------------
View 4 Replies
View Related
Feb 20, 2008
Hello, I cannot get this sql query to run:
Insert Into ProcessQueue (queued_url, que_user, dqueued, quepriority, status)
Values ('domain.com', '1000', GetDate(), '5', IF (Select Count(*)
From ProcessQueue
Where Status = '1') > 3
Then '0' Else '1') Im getting: Incorrect syntax near the keyword 'IF'.Incorrect syntax near the keyword 'Then'.Also, Is there anyway to return the value which was placed into the status column to my app for processing or do I have to open a data reader and use another select statment. Thanks!
View 6 Replies
View Related
Jan 21, 2002
I have a c++ app that is trying to do an update, we use ADO to SQL7. It's returning error code 3119. Has anyone seen this error before? I didn't find anything in BOL or MSDN.
Thanks,
Brian
View 1 Replies
View Related
