I downloaded this program, and when trying to intall I am receiving an error meesage that there is insufficient disk space to install.
I have 98GB available on C and 107 GB available on D. I am on an IBM Intellistation dual processor 3,08 Ghz with 4GB RAM and 240 GB Disk (those are "G"'s), so I have tons of capacity. This has to be a problem with the .msi - any suggestions?
I installed Micrsoft Server Desktop Engine from the CD I received in
my ASP.net book. The installation went fine and then I went to the DOS
prompt and did the "setup SAPWD..." and it ran. I restarted my computer and
opened ASP Matrix and went to the Data tab and proceed to connect to
the server. It gave me an error message it couldn't connect.
So I
uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went
ahead and installed the MSDE again from the CD again and then went to
DOS
to do the setup. It ran through the setup until the very end with 11
seconds remaining and received error message " Setup failed to
configure the server. Refer to the server error logs and setup logs for
more information. I have tried it several times and it always
stops around 11 seconds. I have tried to install the download from
microsoft.com
instead the CD and that didn't work also. So at this point I
am stuck. PLEASE HELP!
I also checked my Registry keys for a file called PendingFileRenameOperations and it wasn't in the registry keys.
If anyone has any suggestions I would appreciate it.
While attempting to configure DTC on a Windows xp Pro, SP 2 machine I receive the error message [DTC was installed by the SQL Server. Please reinstall!] Where do I find this installation file to complete the requested task -- any help would be awesome -- I have tried down loading hotfixes, and security updates that mention fixing problems with DTC -- but alas they did not fix my error ;-)
When running SQLEVAL.EXE, I'm getting an error message when the installation wizard finished 'reading contents of the package' reading:
There is not enough space on C: to extract this package.
Having checked the requirements http://www.microsoft.com/sql/editions/developer/sysreqs.mspx, the free disk space on my c: is 45.42Gb.
Any ideas?
If the service is defined with multiple contracts is there a way to receive a message with a specific contract?
View 5 Replies View RelatedI have an app receiving messages from SQL Service Broker when data is updated. (Messages are located at http://msdn2.microsoft.com/en-us/library/system.data.sqlclient.sqlnotificationinfo.aspx )
When I run this app against a remote SQL Server, I receive the message "Updated" which I expect.
But when I run the same app against the local machine SQL Server, I receive the message "Options".
Does anyone know if there are SQL Server options that must be set to certain values?
I can't seem to find anything that troubleshoots this message... either from a SQLServer- or a .NET standpoint.
I am attempting to Insert multiple rows in a table by passing DataTable to a Stored Proc. My code is the same as the examples on the net, however when I execute the code I receive the Subquery returned more than 1 value error.
I first created up a User-Defined Table Type
My stored proc is as follows:
ALTER PROCEDURE [KCC].[Insert_MaterialJobMtl]
@MtlTblMaterialType READONLY
AS
BEGIN
Set NOCOUNT ON;
[code]....
Hi all,
I
am trying to run a stored procedure which retreives 3 lakhs of records
and updates the data and moves few of those records to some tables.
Since the number of records are more , the time taken for the storede
procedure is around 30 minutes when i directly execute it in query
analyzer.
But I need to execute it from Visula Studio.Net 2005
(c#). Whole of the application contains only one form with a single
button.When I click on the button , this stored procure has to be
executed. But I am getting an error as shown below.
"A
transport-level error has occurred when receiving results from the
server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.)"
Database used is SqlServer 2000
How to solve this error?. Any ideas are really appreciated.
Thanks and Regards,
Sukanya.
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking. The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end. This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions. So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help!
View 2 Replies View RelatedHi,
I am using SQL Server 2005,
while trying to retrieve data from the database; I am getting the following
error:
A transport-level error has occurred when receiving results
from the server. (Provider: TCP Provider, error: 0 - The handle is invalid.)
But I am getting this error randomly.
Can some one help me out?
Waiting for your response
Sudhakar
Hi,
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
Thanks in advance for all replies.
Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?
Cheers Al
Dim repl As New SqlCeReplication()
Try
repl.InternetUrl = InternetUrl
repl.Publisher = Repl_Publisher
repl.PublisherDatabase = Repl_PublisherDatabase
repl.PublisherSecurityMode = SecurityType.DBAuthentication
repl.Publication = Repl_Publication
repl.Subscriber = Repl_Subscriber
repl.SubscriberConnectionString = Repl_SubscriberConnectionString
repl.DistributorLogin = Handhelds_User
repl.DistributorPassword = Handhelds_Password
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize()
MsgBox("Synched!")
Catch err As SqlCeException
MessageBox.Show(err.ToString, "Error")
Finally
Cursor.Current = System.Windows.Forms.Cursors.WaitCursor
End Try
I am Using Sql Server 2005 and XP OS Can i use sql server as a server by xp, if yes how? pls help
thanks in advance
Hi.
I am stuck with error: An error occurred while receiving data: '64(error not found)'.
My Service Broker configuration:
Server A initiator,
Server B target.
Server A sends message to Server B, Server B sends back reply.
On this stage I receive problem. Server B message does not come to server A.
It stays on sys.transmission_queue on server B.
This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B.
So, reply on this message never comes. Initial setup is run using procedure with execute as ��owner��, owner=��dbo��.
But, whenever I send messages after that, everything works fine.
Any suggestions?
Please :-)
i get this error when i try to connect to sql server 2005 developer edition with the latest JDBC.
sql string =>> jdbc:sqlserver://localhost:1434;databaseName=c1 Elvis elvis
SQL STATE: 08S01
ERROR CODE: 0
MESSAGE: An I/O error occurred while receiving the TDS prelogin response.
And the stacktrace is:
com.microsoft.sqlserver.jdbc.SQLServerException: An I/O error occurred while receiving the TDS prelogin response.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.Prelogin(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.<init>(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
and is called :connection=DriverManager.getConnection(con, user, password);
Please tell me what is wrong ? Because in other part of the code it works fine !
What is this "I/O error occurred while receiving the TDS prelogin response" ?
Hi,
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.
And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
Help!
TIA
Ian.
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
Hello,
I have the following problem:
I'am running SQL Server 2005 Express Advanced Services on a Windows 2003 Server in a hosted Environment. Some times SQL Server is beginning writing entries into C:ProgrammeMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG until the disk is full.. After that, I have to delete the error log file (some GB of size), restart the server and everything is running fine until the log file runs amok again.
I have installed SQL Server Management Studio.
With SQL server 2005 Standard I can configure or disable Error logging in the Management Studio. But with the Express Edition it seems that is not possible.
What I want to do is (maybe with system stored procedures)
limit number of error log files by cycling it, e.g. 5 files and delete the old ones
limit the size of one log file. e.g. 100 MB
Is there an option to configure this in the Express edition of SQL Server 2005?
Thanks in advance
Regards
Rolf
OK folks...
here is my deal. I have had the SQL 2005 Dev. Installed on my machine for 6 mos or so. I have had an issue with VS2003,2005 and attempting to get 2008 to use some Silverlight applications...
Long story short...Nothing is working for me and I know want to get my system back to ground zero (Prior to Silverlight desires) I have had to un-install several items. I am also trying to regain the VS2005 that came in my SQL2005 install.
Anyway - I can not un-install my SQL2005 stuff from my PC?
I have setup database mail account with the gmail smtp. But I m getting error (i.e. mail server failure) while sending or receiving database mails.
View 5 Replies View RelatedI keep receiving an update notification for KB 932557 and when I try to apply the fix, it fails. Checking update history tells me error code 0x2c24 is the reason for failure.
I cannot find any help on this error code anywhere.
Any help most appreciated.
I have the following query for my site which was functioning great using the OLEDB driver. Unfortunately, my client's web host forced us to use ODBC and it is no longer working Any suggestions for what I should do?
Here is the query:
SELECT t.*
FROM (SELECT TOP 10 itemnum, itemnum FROM (
SELECT TOP 100 itemnum, itemnum
FROM(CatView)
WHERE [CATALOG PAGE] LIKE 'SM%'
ORDER BY itemnum ASC) AS foo
ORDER BY itemnum DESC) AS bar INNER JOIN CatView AS t ON bar.itemnum = t.itemnum
ORDER BY bar.itemnum;
Here is the error i'm now receiving:
ERROR [HY000] [Microsoft][ODBC Microsoft Access Driver] The specified field 'itemnum' could refer to more than one table listed in the FROM clause of your SQL statement.
I know it was working great before, so i'm not sure what to do.
Michael
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
I have some VB.NET code to retrieve data from an SQL Server database and display it. The code is as follows: -------------------------------------------------------------------------------------------------------
sw_calendar = calendarAdapter.GetEventByID(cid)
If sw_calendar.Rows.Count > 0 Then
lblStartDateText.Text = sw_calendar(0).eventStartDate
lblEndDateText.Text = sw_calendar(0).eventEndDate
lblTitleText.Text = sw_calendar(0).title
lblLocationText.Text = sw_calendar(0).location
lblDescriptionText.Text = sw_calendar(0).description
Else
lblStartDateText.Text = "*** Not Found ***"
lblEndDateText.Text = "*** Not Found ***"
lblTitleText.Text = "*** Not Found ***"
lblLocationText.Text = "*** Not Found ***"
lblDescriptionText.Text = "*** Not Found ***"
End If
-------------------------------------------------------------------------------------------------------
If all of the fields in the database has values, everything works ok. However, if the title, location or description fields have a null value, I receive the following error message:
Unable to cast object of type 'System.DBNull' to type 'System.String'.
I've tried a bunch of different things such as:
Adding ".ToString" to the database field,
Seeing if the value is null: If sw_calendar(0).description = system.DBnull.value...
...but either I get syntax errors in the code, or if the syntax is ok, I still get the above error message.
Can anyone help me with the code required to trap the null within the code example I've provided? I'm sure there are other, and better, ways to code this, but for now I'd really like to get it working as is, and then optimize the code once the application is working (...can you tell I have a tight deadline )
Thanks,
Brad
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error
An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
Any help or direction would be appreciated
The following query works fine in query analyzer, but when I add it to my stored procedure I receive an error 156. How do I work around this?
select distinct(dateposted)
from billingprocedures bp1,
billingprocedureordercomponentvalues bpocv,
ordercomponentvalues ocv
where bp1.billingid = @billingid
and bp1.procedureid = bpocv.billingprocedureid
and bpocv.ordercomponentvalueid = ocv.ordercomponentvalueid
Thanks,
Bryan
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error
An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
Any help or direction would be appreciated
hello,all
I am new to Sql 2000,I installed sql 2000 database in C disk,but Now I found my C disk space is smaller than before,So I want to move my databse(include data and structure) from C Disk to D Disk(its space is very large) .
is it possible to do it ?
if its can be done ,do I need to change my asp.net program source code (exp: chaneg my crystal report connectstring ) ?
thanks in advanced!
Hi all,
Ok here goes,
I have a three tier system using SQL server 2000, we are currently experiencing IO bottle necks on our SCSI Raid 10 array, which holds the Data and the logs in separate partitions.
So my options as I understand it are:
Get Enterprise edition
or
Get another physical raid 10 array and separate the logs and data i.e. data on one array and logs on the other array.
I would like to try the latter but I am totally unsure how much difference this will make or whether it will make any difference at all.
Does anyone know how much performance increase I will get from using two arrays as opposed to one?
Any other advice on this scenario would be greatly appreciated.
Thanks
Any idea of what this means?
My acknowledgement messages are getting stuck in sys.transmission_queue. In profiler, the message generated by the target server (the one sending the ack) is:
This message could not be delivered because it is a duplicate.
The result of the function GET_TRANSMISSION_STATUS is
An error occurred while receiving data: '121(The semaphore timeout period has expired.)'.
Each time I send a new mesage I get one record in sys.conversation_endpoints and two in sys.transmission_queue. The two records in the transmission_queue are the same except one has a NULL for the message body and is_end_of_dialog=1
If I try to clean out the queues they re-populate (I guess becasue the initiator keeps re-trying the message?)
I have double checked my routes back to the initiator and they seem correct (see below). In fact, a second server is using an identical route and it is working OK.
The only thing tricky on this machine is added a second message queue for a differnet kind of message, and it is replying to a different service broker instance. In other words, on server A, database "Production" sends a message to server B, database "Destination" and Server A, database "Schedule" also sends a message to server B, database "Destination".
In the respective return routes I have double checked the guid for the broker_instance.
The broker_instance value in each return route is right out of server A's sys.databses view:
name service_broker_guid
-------------------------------------------------------------------------------------------------
Production 3BE812A8-5212-45D2-8664-521F83689585
Schedule 86113D85-A594-4EAB-8460-3E459EE8F055
The return routes look like this:
CREATE ROUTE [SendReplyProduction] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ProductionChangeService' ,
BROKER_INSTANCE = N'3BE812A8-5212-45D2-8664-521F83689585' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Production" database on Server A
CREATE ROUTE [SendReplySchedule] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ScheduleChangeService' ,
BROKER_INSTANCE = N'86113D85-A594-4EAB-8460-3E459EE8F055' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Schedule" database on Server A
Is this the correct way to do it? And can anyone tell me why I get the semaphore error?
For what it is worth, I am using Transport security only with windows authentication (both machines on the same domain and no certificates)
Thanks for any help!
John
I began recieving the following error message. How can I resolve this?
SQL Server
SQL Server could not find the specified named instance (PINNACLESYS) - please specify the name of an existing instance on the invocation of sqlserver.exe.
thanks,
What does this error mean? I get this in the transmission_status column of sys.transmission_queue
An error occurred while receiving data: '10053(An established connection was aborted by the software in your host machine.)'.
Also, does the number in this message correspond to error 10053 in sys.messages?
Thanks