Receiving Error Message SERVER FAILED TO CONFIGURE THE SERVER.
May 24, 2005
I installed Micrsoft Server Desktop Engine from the CD I received in
my ASP.net book. The installation went fine and then I went to the DOS
prompt and did the "setup SAPWD..." and it ran. I restarted my computer and
opened ASP Matrix and went to the Data tab and proceed to connect to
the server. It gave me an error message it couldn't connect.
So I
uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went
ahead and installed the MSDE again from the CD again and then went to
DOS
to do the setup. It ran through the setup until the very end with 11
seconds remaining and received error message " Setup failed to
configure the server. Refer to the server error logs and setup logs for
more information. I have tried it several times and it always
stops around 11 seconds. I have tried to install the download from
microsoft.com
instead the CD and that didn't work also. So at this point I
am stuck. PLEASE HELP!
I also checked my Registry keys for a file called PendingFileRenameOperations and it wasn't in the registry keys.
If anyone has any suggestions I would appreciate it.
View 5 Replies
ADVERTISEMENT
Oct 12, 2006
Re: SQL Server 2000 Developer Edition
Error message: Setup failed to configure the server
I'm attempting to install SQL Server 2000 Developer Edition on a 2nd workstation in our area for development and practice with having this 2nd workstation as a "local" (test) SQL Server box. The install fails with the above mentioned message. (We have a database running in production on SQL Server 2000 and we need a place to simply copy the database and run tests on it)
The target PC is running WInXP Pro-SP3 and has IIS installed, along with Visual Studio 2005 & .Net framework, etc.
I downloaded it (via MSDN license) and accepted the defaults on the install.
Any feedback is appreciated.
Thanks,
RLN
View 4 Replies
View Related
Feb 6, 2008
I downloaded this program, and when trying to intall I am receiving an error meesage that there is insufficient disk space to install.
I have 98GB available on C and 107 GB available on D. I am on an IBM Intellistation dual processor 3,08 Ghz with 4GB RAM and 240 GB Disk (those are "G"'s), so I have tons of capacity. This has to be a problem with the .msi - any suggestions?
View 6 Replies
View Related
Jan 6, 2006
While attempting to configure DTC on a Windows xp Pro, SP 2 machine I receive the error message [DTC was installed by the SQL Server. Please reinstall!] Where do I find this installation file to complete the requested task -- any help would be awesome -- I have tried down loading hotfixes, and security updates that mention fixing problems with DTC -- but alas they did not fix my error ;-)
View 1 Replies
View Related
May 13, 2004
Hi when I am performing a merge replication between my PDA (SQL CE) and SQL I get the above message. There is no information about it anywhere.
Any ideas?
Thanks in advance.
View 2 Replies
View Related
Dec 12, 2007
Can anyone give a quick description of the meaning of this message andwhat needs to be done to get a connection.I'm running DBArtisan with SQLServer 2000 client SP4 installed.I also get the same message with MS Enterprise Manager so this iscoming out of the actual ODBC connection attempt.Thanks in advance!
View 1 Replies
View Related
Sep 27, 2006
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking. The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end. This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions. So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help!
View 2 Replies
View Related
Jul 21, 2005
Hi
I am trying to install SQL server 7 on XP. I did not install any prerequisite such as service pack 4. During the installation process, I received a error message that says:
'Setup fail to configure the server. Refer to server errorlog and cnfigsvr.out for more information. '
In Errorlog file, the last part of it says:
.
.
.
SQL server's unicode collation is:
'English' (ID =1033) Comparison style =196609
SQL server's non-unicode sort order is:
'no case_iso'(ID=52)
SQL servers non-Unicode character setn is 'iso_1(ID=1)
Warning:
Override, autoexec procedures skipped.
Closing file c:MSSQL7DATAmodel.mdf
Closing file c:mssql7datamodelling.ldf
SQL server is terminating due to 'stop' request from service Control Manager.
In cnfgsvr.out
.
.
.
[Microsoft][ODBC SQL Server Driver][SQL Server] Successfully attached database 'Northwind'
Disconnecting from Server...
Stopping Server ......
Starting Server ......
An error occured while attempting to start the service (1460)
SQL server configuration failed.
Please, help me on how to complete the installation.
Or
Is it because of the service pack 4 that I didn't install that is causing the problem.
View 3 Replies
View Related
Aug 27, 2015
I am attempting to Insert multiple rows in a table by passing DataTable to a Stored Proc. My code is the same as the examples on the net, however when I execute the code I receive the Subquery returned more than 1 value error.
I first created up a User-Defined Table Type
My stored proc is as follows:
ALTER PROCEDURE [KCC].[Insert_MaterialJobMtl]
@MtlTblMaterialType READONLY
AS
BEGIN
Set NOCOUNT ON;
[code]....
View 9 Replies
View Related
Nov 27, 2006
Hi all,
I
am trying to run a stored procedure which retreives 3 lakhs of records
and updates the data and moves few of those records to some tables.
Since the number of records are more , the time taken for the storede
procedure is around 30 minutes when i directly execute it in query
analyzer.
But I need to execute it from Visula Studio.Net 2005
(c#). Whole of the application contains only one form with a single
button.When I click on the button , this stored procure has to be
executed. But I am getting an error as shown below.
"A
transport-level error has occurred when receiving results from the
server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.)"
Database used is SqlServer 2000
How to solve this error?. Any ideas are really appreciated.
Thanks and Regards,
Sukanya.
View 4 Replies
View Related
May 13, 2008
Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?
Cheers Al
Dim repl As New SqlCeReplication()
Try
repl.InternetUrl = InternetUrl
repl.Publisher = Repl_Publisher
repl.PublisherDatabase = Repl_PublisherDatabase
repl.PublisherSecurityMode = SecurityType.DBAuthentication
repl.Publication = Repl_Publication
repl.Subscriber = Repl_Subscriber
repl.SubscriberConnectionString = Repl_SubscriberConnectionString
repl.DistributorLogin = Handhelds_User
repl.DistributorPassword = Handhelds_Password
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize()
MsgBox("Synched!")
Catch err As SqlCeException
MessageBox.Show(err.ToString, "Error")
Finally
Cursor.Current = System.Windows.Forms.Cursors.WaitCursor
End Try
View 3 Replies
View Related
Nov 14, 2006
I have searched and could not find an answer for this one I read log and it said
Starting Service ...
SQL_Latin1_General_CP1_CI_AS
-m -Q -T4022 -T3659
Connecting to Server ...
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
SQL Server configuration failed.
how do I fix this?
View 7 Replies
View Related
Jan 24, 2007
Hi,
I am using SQL Server 2005,
while trying to retrieve data from the database; I am getting the following
error:
A transport-level error has occurred when receiving results
from the server. (Provider: TCP Provider, error: 0 - The handle is invalid.)
But I am getting this error randomly.
Can some one help me out?
Waiting for your response
Sudhakar
View 7 Replies
View Related
Mar 8, 2007
Hi,
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
Thanks in advance for all replies.
View 3 Replies
View Related
Jun 28, 2006
If the service is defined with multiple contracts is there a way to receive a message with a specific contract?
View 5 Replies
View Related
Nov 2, 2006
I have an app receiving messages from SQL Service Broker when data is updated. (Messages are located at http://msdn2.microsoft.com/en-us/library/system.data.sqlclient.sqlnotificationinfo.aspx )
When I run this app against a remote SQL Server, I receive the message "Updated" which I expect.
But when I run the same app against the local machine SQL Server, I receive the message "Options".
Does anyone know if there are SQL Server options that must be set to certain values?
I can't seem to find anything that troubleshoots this message... either from a SQLServer- or a .NET standpoint.
View 7 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Aug 13, 2007
This is the message I get when I try to create a report that has a lot of fields, I'm guessing that might be the problem.
Warning 1 Deserialization failed: The value must be between 0cm and 406.34921cm.
Parameter name: Width Line 10, position 30. 10 0
View 8 Replies
View Related
Aug 27, 2007
I have SSRS installed on a web server and points to another SQL Server with the ReportServer database. Every now and then I would get this error message on Report Manger:
Client found response content type of '', but expected 'text/xml'. The request failed with an empty response.
Here is a trace from Stack Trace from ReportServerWebApp log file:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesLogFilesReportServerWebApp__08_27_2007_00_09_07.log</Path>
<SystemName>WATCOMWEB</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/27/2007-00:09:07:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!6!8/27/2007-00:09:10:: e ERROR: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
w3wp!ui!6!8/27/2007-00:09:10:: e ERROR: HTTP status code --> 500
-------Details--------
System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!6!8/27/2007-00:09:13:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
Other times I would get this error:
The request failed with the error message:
--
<html><head><title>Object moved</title></head><body> <h2>Object moved to <a href="/insightrptserver/logon.aspx?ReturnUrl=%2finsightrptserver%2fReportExe
cution2005.asmx">here</a>.</h2>
</body></html>
Stack Trace from ReportServerWebApp log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesLogFilesReportServerWebApp__08_26_2007_22_03_51.log</Path>
<SystemName>WATCOMWEB</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/26/2007-22:03:51:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!6!8/26/2007-22:07:35:: Unhandled exception: System.Net.WebException: The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/insightrptserver/logon.aspx?ReturnUrl=%2finsightrptserver%2fReportExecution2005.asmx">here</a>.</h2>
</body></html>
--.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.GetExecutionInfo()
at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.GetExecutionInfo()
at Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo()
at Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad)
at Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad)
at Microsoft.Reporting.WebForms.ReportDataOperation..ctor()
at Microsoft.Reporting.WebForms.HttpHandler.GetHandler()
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
w3wp!ui!5!8/26/2007-22:07:48:: Unhandled exception: System.Net.WebException: The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="/insightrptserver/logon.aspx?ReturnUrl=%2finsightrptserver%2fReportExecution2005.asmx">here</a>.</h2>
</body></html>
--.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.GetRenderResource(String Format, String DeviceInfo, String& MimeType)
at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.GetRenderResource(String Format, String DeviceInfo, String& MimeType)
at Microsoft.Reporting.WebForms.ServerReport.GetRenderResource(String format, String streamId, String& mimeType)
at Microsoft.Reporting.WebForms.ServerReportControlSource.GetRendererImage(String streamID, String& mimeType)
at Microsoft.Reporting.WebForms.ReportImageOperation.GetRendererImage(String resourceID, HttpResponse response)
at Microsoft.Reporting.WebForms.ReportImageOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
w3wp!ui!7!8/26/2007-22:08:22:: e ERROR: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
w3wp!ui!7!8/26/2007-22:08:22:: e ERROR: HTTP status code --> 500
-------Details--------
System.InvalidOperationException: Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.ListSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!7!8/26/2007-22:08:22:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
Does any know what causes these errors. They don't appear very often, but often enought for the users to complain.
-waslam
View 4 Replies
View Related
Aug 16, 2006
I have completely uninstalled and reinstalled SQL 2005 in same computer name
Can someone point me in the right direction? Here is the error I receive when I try to 'Configure Distribution' in the SQL 2005 management studio.
TITLE: Microsoft.SqlServer.ConnectionInfo
------------------------------
SQL Server could not configure 'serverdados
epl' as a Distributor.
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An error occurred during decryption.
There is no remote user 'distributor_admin' mapped to local user '(null)' from the remote server 'repl_distributor'.
Changed database context to 'master'. (Microsoft SQL Server, Error: 15466)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2153&EvtSrc=MSSQLServer&EvtID=15466&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any/all help is greatly appreciated.
View 4 Replies
View Related
Oct 18, 2007
Hi,
I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
Thanks,
View 5 Replies
View Related
Oct 13, 2006
Here is the full message from the Event Log.
Failed to initialize Distributed COM (CoInitializeEx returned 80010119). Heterogeneous queries and remote procedure calls are disabled. Check the DCOM configuration using Component Services in Control Panel.
Any ideas as to how to troubleshoot or solve this?
Thanks!
View 3 Replies
View Related
Jan 30, 2007
hi,
I'm working on "MERGE REPLICATION"...i followed the procedure same as the book
"SQL SERVER CE DATABASE DEVELOPMENT WITH the .NET COMPACT FRAMEWORK"Author Rob Tiffany, ch9,10
i got one error msg that..."a request to send data to the computer funning IIS failed,for more information seeHRESULT " ..When my program hits rep.Syncronize()...
here my codes
\\\\\\\\\\\
rep = New SqlCeReplication
rep.InternetUrl= "https://seawolf/fieldagentrda/sscesa20.dll"
rep.InternetLogin = "robtiffany"
rep.InternetPassword = "pinnacle"
rep.Publisher = "seawolf"
rep.PublisherDatabase = "IntelligenceData"
rep.PublisherLogin = "sa"
rep.PublisherLogin = "apress"
rep.Publication = "IntelligenceDataPublication"
rep.Subscriber = "subscriber"
rep.SubscriberConnectionString="Datasource=My Documents" & _"IntelligenceData.sdf;" & _ "SSCE:Database Password=apress"
If File.Exists("MyDocumentsIntelligenceData.sdf") Then
rep.Synchronize()
Else
MessageBox.Show("You must first create a database", "Error")
End If
\\\\\\\\\\\\\\\\\\\
can anyone help me ,how to solve this issue?
Thanks in advance
View 2 Replies
View Related
Jul 30, 2007
When try to run report, I receive this message:€śLogon failed.
For more information about this error navigate to the report server on the local server machine, or enable remote errors
We just have Reporting Services server (2005) up and running, my roles are browser, Content Manager, My Reports, Publisher, Report Builder. I was able to deployed the report and set up data source. Connect using credentials supplied by suer running the report, and use as Windows credentails when connecting to the data source checked.
Did a search on but can't find any messages that related to this problem.
Please advise.
View 1 Replies
View Related
Mar 3, 2008
Hello everybody,I was configuring a SqlDataSource control using SQL Authentication mode.I first added a database file (testdb.mdf) through Solution Explorer-Add New Items. Then through Database Explorer I created a table named "info"Then while configuring the SqlDataSource control I used the SQL Authentication mode and attached the "testdb.mdf" database file.Test Connection showed success. But when I hit the Ok button of the wizard it displayed the following error message:Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance.While configuring the SqlDataSource control I clicked "New Connection". Under Data Source section I tried both Microsoft SQL Server and Microsoft SQL Server Database File. And in both the cases I attached a databese file(testdb.mdf). Plz enlighten me on this.Thanks and Regards,Sankar.
View 1 Replies
View Related
Sep 9, 2015
Many a times see the below error in SQL Error log.
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Is this something to do here?
Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?
CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS
View 1 Replies
View Related
Jan 19, 2007
Hi,
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
View 2 Replies
View Related
Nov 20, 2006
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
View 5 Replies
View Related
Oct 19, 2006
When installing SQLEXPRESS I am getting this message:
Setup failed because service MSSQL$SQLExpress is disabled for the current hardware profile. Services must be set with the current Hardware Profile logon property enabled.
Anybody knows how to fix this problem?
Eitan
View 6 Replies
View Related
Nov 14, 2007
Hi,
I've tried looking for a solution in other threads but I couldn't find anything that was completely the same as my situation. I got a new pc at work and I've tried installing SQL Server 2005 on it but everytime I try to install it, regardless of services included or excluded with the install, I cannot get through the install without this error. Below is the excerpt from the Summary.txt log file.
Error Code: -2147024894
MSI (s) (74!98) [17:10:55:858]: Product: Microsoft SQL Server 2005 Tools -- Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlAssemblyRegSvcs
PerfTime Start: Do_sqlAssemblyRegSvcs : Mon Nov 12 17:10:55 2007
<Func Name='Do_sqlAssemblyRegSvcs'>
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog.
Error: 2147942402
Error message: The system cannot find the file specified.
Error descrition: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error Code: -2147024894
Windows Error Text: The system cannot find the file specified.
Source File Name: sqlcasqlassembly.cpp
Compiler Timestamp: Thu Aug 11 01:12:01 2005
Function Name: Do_sqlAssemblyRegSvcs
Source Line Number: 155
I've searched for and found similar problems that deal with the microsoft.sqlserver.notificationservices.dll not being found but I haven't found a fix that worked for me. These are the fixes I've refered to thus far.
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1651162&SiteID=17
http://support.microsoft.com/kb/940971
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29549&EvtType=sqlcasqlassembly.cpp@Do_sqlAssemblyRegSvcs@Do_sqlAssemblyRegSvcs@x80131501
The answer that seems to fix this problem for everyone is to set the MSDTC service login as the NT AUTHORITYNetworkService account. The problem for me is that this is already set to this profile and I've tried resetting the services and rebooting the machine. I did not have a problem with my old machine, which as far as I can tell, is the same configuration, so I know this install should work.
I'm running Windows XP SP2. This is not the upgrade to SQL Server 2005 SP2, this is the original disk that came with Visual Studio 2005.
Has anyone else faced this issue where changing the MSDTC login wasn't the solution? Also, this is my first post, so I apologize if I've left anything out. Just let me know if you want any other information.
Thank you in advance.
Tim
View 7 Replies
View Related
Nov 23, 2007
I began recieving the following error message. How can I resolve this?
SQL Server
SQL Server could not find the specified named instance (PINNACLESYS) - please specify the name of an existing instance on the invocation of sqlserver.exe.
thanks,
View 3 Replies
View Related
Nov 26, 2007
I have a website that works OK on my local machine when I test it within Microsoft Visual Studio's debugging mode. However now that I have copied it over to a remote server it is failing with an error message of:An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified)As far as I'm aware I have never used SQL Server with my webpage. All connections to databases are to Oracle with connection strings and providers set up in the webconfig file. The website does however use a login control to recognise authorised users. Does this mean I've unknowingly been using SQL Server (to support the login control) and I therefore need to install this on the remote machine? Or is it something simpler? Wondered if anybody had seen this error message before?
View 4 Replies
View Related
Mar 28, 2001
Event Id: 8, Source: SQLCTR60
Type: error, Catagory: None,
DB-Library error - unexpected EOF from SQL server. Conection broken.
View 2 Replies
View Related
