While attempting to configure DTC on a Windows xp Pro, SP 2 machine I receive the error message [DTC was installed by the SQL Server. Please reinstall!] Where do I find this installation file to complete the requested task -- any help would be awesome -- I have tried down loading hotfixes, and security updates that mention fixing problems with DTC -- but alas they did not fix my error ;-)
I downloaded this program, and when trying to intall I am receiving an error meesage that there is insufficient disk space to install.
I have 98GB available on C and 107 GB available on D. I am on an IBM Intellistation dual processor 3,08 Ghz with 4GB RAM and 240 GB Disk (those are "G"'s), so I have tons of capacity. This has to be a problem with the .msi - any suggestions?
I installed Micrsoft Server Desktop Engine from the CD I received in
my ASP.net book. The installation went fine and then I went to the DOS
prompt and did the "setup SAPWD..." and it ran. I restarted my computer and
opened ASP Matrix and went to the Data tab and proceed to connect to
the server. It gave me an error message it couldn't connect.
So I
uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went
ahead and installed the MSDE again from the CD again and then went to
DOS
to do the setup. It ran through the setup until the very end with 11
seconds remaining and received error message " Setup failed to
configure the server. Refer to the server error logs and setup logs for
more information. I have tried it several times and it always
stops around 11 seconds. I have tried to install the download from
microsoft.com
instead the CD and that didn't work also. So at this point I
am stuck. PLEASE HELP!
I also checked my Registry keys for a file called PendingFileRenameOperations and it wasn't in the registry keys.
If anyone has any suggestions I would appreciate it.
If the service is defined with multiple contracts is there a way to receive a message with a specific contract?
View 5 Replies View RelatedI have an app receiving messages from SQL Service Broker when data is updated. (Messages are located at http://msdn2.microsoft.com/en-us/library/system.data.sqlclient.sqlnotificationinfo.aspx )
When I run this app against a remote SQL Server, I receive the message "Updated" which I expect.
But when I run the same app against the local machine SQL Server, I receive the message "Options".
Does anyone know if there are SQL Server options that must be set to certain values?
I can't seem to find anything that troubleshoots this message... either from a SQLServer- or a .NET standpoint.
Hi,
I'm running W2K3 SP1. The MDAC Configuration Checker reports MDAC 2.8 SP2. The only discrepancy is MSADCO.DLL, where the expected version is 2.82.1830.0 and my actual version is 2.82.2651.0 (svr03_sp1_gdr.060301-1546).
The error message I'm getting when I use the ODBC Administrator dialog to set up a new entry is: "The setup routines for the SQL Server ODBC driver could not be found. Please reinstall the driver."
This is followed by a dialog titled: "Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed." The body text of the dialog is "Component not found in the registry."
Does anyone have any idea how I can repair this?
Thanks,
I have Windows XP professional with sp2 installed on my computer, with SQL 2K personal edition. I try to use enterprise manager, return all rows in
any table, and i get the error "provider cannot be found. It may not
be properly installed". After running component checker, I found the msdasql.dll can not be registered.
please help me to fix it. Thanks a lot.
I am installing SQL2005 Develop Edition, it goes to "Detecting Installed IIS" screen and stop there. No error messages, but not moving forward, kinda stuck. I am using XP Professional Service Pack 2, I tried uninstall IIS, got the same result. If anyone knows how to solve this problem, please advice, thanks a lot!
View 7 Replies View RelatedHi,
We are running :
- Visual Studio 2005 Team Edition for Software Developers
- SQL Server 2005 Express (SQLEXPR32.EXE)
Installed :
- SQL Server with Advanced Services (SQLEXPR_ADV.EXE) incl. Reporting Services
- SQL Server Toolkit (SQLEXPR_TOOLKIT.EXE)
We have a VS Solution with a Reporting Project
When opening Visual Studio, the following message appears :
"Make sure the application for the project type (.rptproj) is installed."
I have no idea why this message appears.
Is this a known problem/bug ? Anybody any idea how I can solve this ?
Many thanks in advance.
Vincent
Hi,
We are running :
- Visual Studio 2005 Team Edition for Software Developers
- SQL Server 2005 Express (SQLEXPR32.EXE)
Installed :
- SQL Server with Advanced Services (SQLEXPR_ADV.EXE) incl. Reporting Services
- SQL Server Toolkit (SQLEXPR_TOOLKIT.EXE)
We have a VS Solution with a Reporting Project
When opening Visual Studio, the following message appears :
"Make sure the application for the project type (.rptproj) is installed."
I have no idea why this message appears.
Is this a known problem/bug ? Anybody any idea how I can solve this ?
Many thanks in advance.
I want to find whether SQL Server 2005 x86 is installed or SQL Server 2005 x64 is installed programatically(Any API would do.) If anyone can recommend a registry key that I can rely on find whether it is a 32 bit or 64 bit SQL Server that would suffice.
View 5 Replies View Relatedhi friends, i want to store an image in DB. but most of my friends told that, to store an image in web server then store tat location in a DB and access it anywhere. this is for asp.net in C#-code behind. how to do this? i've a table with a text field. then .......? waiting for ur reply............ note: i need coding. not by using controls. pls...
View 1 Replies View RelatedI need to reinstall on one production server. What steps to be taken before uninstall and install
I am new to SQL Server, please can anyone guide me on this?
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking. The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end. This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions. So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help!
View 2 Replies View RelatedSince there is not a method to uninstall SP2 for SQL Server 2005 Express, it is recommended to completely uninstall and then reinstall. I have backed up all databases as well as generated a script to recover username/passwords, is there anything else I should be taking into consideration?
View 4 Replies View Relatedhi Everybody,
for some reason my Sql Server has stopped and i am not able to restart it at all, do i have to reinstall the complete SQl Software or is there ne way i can start the MSSQL Server
They are corrupt. I cannot get the odbc driver applet for sql serverto open when I click add and I cannot configure any existing ones. Andthe usage of the drivers fail.Other ODBC drivers work.Does anyone know how to reinstall the SQL Server set of ODBC drivers?MDAC wouldn't install, said it was already at current level.Thanks for any ideas.
View 2 Replies View RelatedHi,I just unistalled Sql Management Express and now I want to install it again but the installer says the product is already installed,Can somebody help me with this
View 3 Replies View RelatedIn previous post in the Getting Started section, I discussed problems trying to run queries on multiple databases:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=299240#299240&SiteID=1
Nobody could help with the problem. I eventually got a query to run after several attempts at deleting and recreating databases. Then, I was hit with the following error message:
Class does not support aggregation (or class object is remote) (Exception from HRESULT: 0x80040110 (CLASS_E_NOGGREGATION)) (Microsoft.SqlServer.SqlTools.VSIntegration)
Nobody could help with that either but based on posts with the same message, I tried uninstalling sql server. It wouldn't uninstall nor can I repair or reinstall. Uninstalling thru Add or Remove Programs only resulted in the program listing being removed from Add or Remove Programs. Most of the sql server programs are still installed. They can be run but continue to malfunction. When I try a new installation, I get a message that the programs are already installed.
Is a complete reinstall of windows xp, programs and data the only solution? I hate to believe it; but, at this point, I see no other choice.
Previously, I have installed SQL 2005 developer edition simplyfied chinese
successfully. But yesterday, I tried to install mobile client software
factory. The installation process create a database as following:
Create DATABASE [AdventureWorksMobileStaging] ON PRIMARY
( NAME = N'AdventureWorksMobileStaging', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging.mdf' , SIZE = 195584KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
( NAME = N'AdventureWorksMobileStaging_log', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging_log.ldf' , SIZE = 265344KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
But today, when I start my notebook, SQL server could not be started.
Then I uninstalled the SQL instance by start->control panel->uninstall...The uninstall
process seems OK. Note that I only uninstalled the instance.Then I tried to reinstall
SQL 2005. However it was reported a Performance Monitor Counter registry key mismatch
error occures. I tried to fix it but failed. The problem is as following:
1, The installation process report a warning of low memory.
My notebook has 512M memory. I have reinstalled SQL 2005 once successfully. At that
time, the warning also shows, but it seems that this warning does not affect installation.
2, User type problem.
The OS of my notebook is XP professional, which is upgraded from XP home edition.
I login it using a domain user such as: "my company's domainmyaccount". I found it
curiously that although I assign myaccount as an Administrator, it will automaticly
changed to "SQL$...." account. I don't know why and when the account property is
changed. But everytime, when I found, I will assign myaccount as an Administrator
back.
3, Performance Monitor Counter registry key problem.
To fix the problem, I firstly tried to run lodctr.exe in cmd window but failed.
When I cd to c:windowssystem32 dir, I can ran lodctr.exe correctly.
I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib,
the result is:
"Last Counter"=dword:0000149c (11128)
"Last Help"=dword:0000149d (11129)
Then I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib 09
and 004, the result is confusing. I can find counter and help key,but both keys contains
really a lot of stuff as:
(1) first page of Counter key:
1
1847
2
System
4
Memory
6
% Processor Time
10
File Read Operations/sec
12
(2) first page of Help key:
3
The System performance object consists of counters that apply to more than one instance of a component processors on the computer.
5
The Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random access memory on the computer. Virtual memory consists of the space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes.
7
% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the duration of the idle thread is active in the sample interval, and subtracting that time from interval duration. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It is calculated by monitoring the time that the service is inactive, and subtracting that value from 100%.
9
% Total DPC Time is the average percentage of time that all processors spend receiving and servicing deferred procedure calls (DPCs). (DPCs are interrupts that run at a lower priority than the standard interrupts). It is the sum of Processor: % DPC Time for all processors on the computer, divided by the number of processors. System: % Total DPC Time is a component of System: % Total Privileged Time because DPCs are executed in privileged mode. DPCs are counted separately and are not a component of the interrupt count. This counter displays the average busy time as a percentage of the sample time.
11
File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
I could not find the maximum value of the Counter key and help key, so I could not repair
Last Counter and Last Help key as discribed at SQL 2005 help. Which item correspond to
maximum value of the Counter key and help key?
I tried to correct Last Counter and Help key as:
"Last Counter"=dword:0000149c (5276)
"Last Help"=dword:0000149d (5277)
But it also doesn't work.
Hi,
I had to do a system restore to solve some other issues now my SQL Server 2005 doesnt work (SQL Server 2000 on the same machine [diffrent instance] does). I have tried to uninstall with add/remove programs but the instance doesnt appear there. I have tried to use the 'ARPWrapper.exe /Remove' command as described in KB909967 wich also fails.
I have also tried to reinstall with no sucess. I also tried uninstalling SQL2000 and removing as many references as I could find, again now joy.
Is there a script somewhere to remove everything (although I would like to try and keep the SQL2000 instance)?
I had SQL Server 2005 Express installed on my computer, but was having problems with it interacting with Visual c++ 2005 Express Edition. I uninstalled both items, but now cannot get SQL Server to reinstall. Everything works fine until the installation gets to the "SQL Server Database Services" portion. At that point, I get a failure stating, "The SQL Server service failed to start. For more information see the SQL Server Books Online topics, 'How To: View SQL Server 2005 Setup Log Files' and 'Starting SQL Server Manually'." Behind this modal dialog box, in the install window, it seems to have stopped at "Running action to shutdown instance(Run As Normal User) RANU instance shutdown in progress: MSSQL$SQLEXPRESS"I have tried everything I can find online about this, including use of the Windows Install Clean Up, Aaron Stebner's blog about how to remove a beta version (http://blogs.msdn.com/astebner/archive/2005/12/08/501885.aspx), Ttools, and the Visual Studio Uninstall program. I have manually deleted the folder for SQL Server from my Program Files folder, I have deleted all mention of the program from my registry, and yet I still cannot get the darned thing to reinstall.
My computer is a Pentium Duo-Core 2 6600, running at 2.4 GHz, with 2GB RAM, 129GB of 279GB hard drive space free
, with an NVIDIA GeForce 7600 GS video card. As I say, I had the program running, it just won't reinstall. I am logged on as the one and only user, and I have Administrator priveleges. There have been no changes to the PC aside from removing and trying to reinstall the C++ and SQL Server programs. Can anyone give guidance as to what the heck is going on and what to do?? The haed and tail of my error log is below. I am stuck. Thank you.
Regards,
Andy
=== Verbose logging started: 11/1/2007 11:16:13 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (1C:1C) [11:16:13:234]: Resetting cached policy values
MSI (c) (1C:1C) [11:16:13:234]: Machine policy value 'Debug' is 0
MSI (c) (1C:1C) [11:16:13:234]: ******* RunEngine:
******* Product: c:e02e41a11dc741be12SetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (c) (1C:1C) [11:16:13:234]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (1C:1C) [11:16:13:234]: Grabbed execution mutex.
MSI (c) (1C:1C) [11:16:13:250]: Cloaking enabled.
MSI (c) (1C:1C) [11:16:13:250]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (1C:1C) [11:16:13:250]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (DC:EC) [11:16:13:250]: Grabbed execution mutex.
MSI (s) (DC:F0) [11:16:13:250]: Resetting cached policy values
MSI (s) (DC:F0) [11:16:13:250]: Machine policy value 'Debug' is 0
MSI (s) (DC:F0) [11:16:13:250]: ******* RunEngine:
******* Product: c:e02e41a11dc741be12SetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (s) (DC:F0) [11:16:13:250]: Machine policy value 'TransformsSecure' is 0
MSI (s) (DC:F0) [11:16:13:250]: User policy value 'TransformsAtSource' is 0
MSI (s) (DC:F0) [11:16:13:250]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (DC:F0) [11:16:13:250]: File will have security applied from OpCode.
MSI (s) (DC:F0) [11:16:15:781]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'c:e02e41a11dc741be12SetupSqlRun_SQL.msi' against software restriction policy
MSI (s) (DC:F0) [11:16:15:781]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (s) (DC:F0) [11:16:15:781]: SOFTWARE RESTRICTION POLICY: c:e02e41a11dc741be12SetupSqlRun_SQL.msi is not digitally signed
MSI (s) (DC:F0) [11:16:15:781]: SOFTWARE RESTRICTION POLICY: c:e02e41a11dc741be12SetupSqlRun_SQL.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (DC:F0) [11:16:15:781]: End dialog not enabled
MSI (s) (DC:F0) [11:16:15:781]: Original package ==> c:e02e41a11dc741be12SetupSqlRun_SQL.msi
MSI (s) (DC:F0) [11:16:15:781]: Package we're running from ==> c:WINDOWSInstaller46c82d.msi
MSI (s) (DC:F0) [11:16:15:828]: APPCOMPAT: looking for appcompat database entry with ProductCode '{2B2EF9D0-3876-4021-8F44-FA294E6D3C36}'.
MSI (s) (DC:F0) [11:16:15:828]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (DC:F0) [11:16:15:828]: Detected that this product uses a multiple instance transform.
MSI (s) (DC:F0) [11:16:15:828]: MSCOREE already loaded, using loaded copy
MSI (s) (DC:F0) [11:16:15:828]: Applying multiple instance transform 'qlRun01.mst'...
MSI (s) (DC:F0) [11:16:15:828]: Looking for storage transform: SqlRun01.mst
MSI (s) (DC:F0) [11:16:15:828]: Validating transform 'SqlRun01.mst' with validation bits 0x809
MSI (s) (DC:F0) [11:16:15:828]: Transform 'SqlRun01.mst' is valid.
.
.
.
Property(S): SqlVerComBinRes1033.CC4DBEA7_CD8B_4AAE_A10F_657CBA390BD6 = c:Program FilesMicrosoft SQL Server90COMResources1033
Property(S): SqlInstance.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
Property(S): SqlTarget.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL Server
Property(S): SqlInstanceBin.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
Property(S): Data.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL Server
Property(S): DataInstance.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
Property(S): FTDataDir.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
Property(S): DataInstanceTxt.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
Property(S): DataInstanceFTData.7827AB3E_7041_406A_9591_4DB66042927F = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
Property(S): ModuleID_FTSSV = 68C6D15C_77E0_11D5_8528_00C04F68155C
Property(S): SqlFullTextDefaultPath = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
Property(S): FTERefPath.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
Property(S): QuotedServiceGroupFTS.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = ANDYSSQLServer2005MSFTEUser$ANDYS$SQLEXPRESS
Property(S): FTEInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLEXPRESS
Property(S): FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.1
Property(S): FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C = SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1MSSearch
Property(S): FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.1MSSQL
Property(S): FTEStartupType = 0
Property(S): FTEStatus = 3
Property(S): InstanceRegKey.7827AB3E_7041_406A_9591_4DB66042927F = Microsoft SQL ServerMSSQL.1
Property(S): InstanceName.7827AB3E_7041_406A_9591_4DB66042927F = SQLEXPRESS
Property(S): SqlVerComFT.BB43EC2E_1D73_400F_AE2F_F370407BC222 = c:Program FilesMicrosoft SQL Server90COM
Property(S): Ver.BB43EC2E_1D73_400F_AE2F_F370407BC222 = c:Program FilesMicrosoft SQL Server90
Property(S): FTESqlInstanceBin.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
Property(S): FTESqlInstance.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
Property(S): FTESqlInstanceBinRef.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef
Property(S): FTESqlInstanceDotNumber.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1
Property(S): SqlVer.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL Server90
Property(S): FTESharedCompRoot.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL Server90
Property(S): Sql.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL Server
Property(S): SqlTarget.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL Server
Property(S): ProgramFilesFolder.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program Files
Property(S): CAFTERemovePerfCounters.68C6D15C_77E0_11D5_8528_00C04F68155C = $SQLEXPRESS
Property(S): CAFTEUninstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
Property(S): CAFTEUpgradeFTERefFiles.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLServer$SQLEXPRESS:c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef
Property(S): CAFTEUpgradeFTERefFilesRollBack.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef
Property(S): CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
Property(S): CAFTEAddCertificate.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
Property(S): CAFTEInstallPerfCounters.68C6D15C_77E0_11D5_8528_00C04F68155C = c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSQLEXPRESS
Property(S): CARemoveFTEServiceDependency.68C6D15C_77E0_11D5_8528_00C04F68155C = msftesql$SQLEXPRESS
Property(S): CASetLaunchPermissions.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D318-77E0-11D5-8528-00C04F68155C}:NT AUTHORITYNetworkService
Property(S): FTERegInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLEXPRESS
Property(S): FTERegRudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.1
Property(S): FTEUPGRADE.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgrade30.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgradeMSSearchApp.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLServer$SQLEXPRESS
Property(S): FTEUpgradeMSSearchStandalone.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): CostingComplete = 1
Property(S): FTEInstID.68C6D15C_77E0_11D5_8528_00C04F68155C = 1
Property(S): FTEAppID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D318-77E0-11D5-8528-00C04F68155C}
Property(S): FTEAdminCLSID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D37C-77E0-11D5-8528-00C04F68155C}
Property(S): FTEIFTEAdmin.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bd6f-cc0d-11d6-9a15-505054503030}
Property(S): FTEMSFTEPXY.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bdd4-cc0d-11d6-9a15-505054503030}
Property(S): FTEDollarInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = $SQLEXPRESS
Property(S): FTEServiceName.68C6D15C_77E0_11D5_8528_00C04F68155C = msftesql$SQLEXPRESS
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryServer = ReportServer$SQLEXPRESS
Property(S): SqlActionManaged = 3
Property(S): SqlNamedInstance = 1
Property(S): SqlStateManaged = 2
Property(S): RSVirtualDirectoryManager = Reports$SQLEXPRESS
Property(S): SOURCEDIR = c:e02e41a11dc741be12Setup
Property(S): SourcedirProduct = {B0F9497C-52B4-4686-8E73-74D866BBDF59}
Property(S): SQLBROWSERSCMACCOUNT = NT AUTHORITYNetworkService
Property(S): SQLSCMACCOUNT = NT AUTHORITYNetworkService
Property(S): DebugClsid.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = {04F4B2AC-58A6-4ADD-98ED-84973C96062A}
Property(S): ProductToBeRegistered = 1
MSI (s) (DC:F0) [11:19:42:109]: Note: 1: 1708
MSI (s) (DC:F0) [11:19:42:109]: Product: Microsoft SQL Server 2005 -- Installation failed.
MSI (s) (DC:F0) [11:19:42:125]: Cleaning up uninstalled install packages, if any exist
MSI (s) (DC:F0) [11:19:42:125]: MainEngineThread is returning 1603
MSI (s) (DC:EC) [11:19:42:125]: Destroying RemoteAPI object.
MSI (s) (DC:38) [11:19:42:140]: Custom Action Manager thread ending.
=== Logging stopped: 11/1/2007 11:19:42 ===
MSI (c) (1C:1C) [11:19:42:140]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (1C:1C) [11:19:42:140]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/1/2007 11:19:42 ===
Previously, I have installed SQL 2005 developer edition simplyfied chinese
successfully. But yesterday, I tried to install mobile client software
factory. The installation process create a database as following:
Create DATABASE [AdventureWorksMobileStaging] ON PRIMARY
( NAME = N'AdventureWorksMobileStaging', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging.mdf' , SIZE = 195584KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
( NAME = N'AdventureWorksMobileStaging_log', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging_log.ldf' , SIZE = 265344KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
But today, when I start my notebook, SQL server could not be started.
Then I uninstalled the SQL instance by start->control panel->uninstall...The uninstall
process seems OK. Note that I only uninstalled the instance.Then I tried to reinstall
SQL 2005. However it was reported a Performance Monitor Counter registry key mismatch
error occures. I tried to fix it but failed. The problem is as following:
1, The installation process report a warning of low memory.
My notebook has 512M memory. I have reinstalled SQL 2005 once successfully. At that
time, the warning also shows, but it seems that this warning does not affect installation.
2, User type problem.
The OS of my notebook is XP professional, which is upgraded from XP home edition.
I login it using a domain user such as: "my company's domainmyaccount". I found it
curiously that although I assign myaccount as an Administrator, it will automaticly
changed to "SQL$...." account. I don't know why and when the account property is
changed. But everytime, when I found, I will assign myaccount as an Administrator
back.
3, Performance Monitor Counter registry key problem.
To fix the problem, I firstly tried to run lodctr.exe in cmd window but failed.
When I cd to c:windowssystem32 dir, I can ran lodctr.exe correctly.
I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib,
the result is:
"Last Counter"=dword:0000149c (11128)
"Last Help"=dword:0000149d (11129)
Then I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib 09
and 004, the result is confusing. I can find counter and help key,but both keys contains
really a lot of stuff as:
(1) first page of Counter key:
1
1847
2
System
4
Memory
6
% Processor Time
10
File Read Operations/sec
12
(2) first page of Help key:
3
The System performance object consists of counters that apply to more than one instance of a component processors on the computer.
5
The Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random access memory on the computer. Virtual memory consists of the space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes.
7
% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the duration of the idle thread is active in the sample interval, and subtracting that time from interval duration. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It is calculated by monitoring the time that the service is inactive, and subtracting that value from 100%.
9
% Total DPC Time is the average percentage of time that all processors spend receiving and servicing deferred procedure calls (DPCs). (DPCs are interrupts that run at a lower priority than the standard interrupts). It is the sum of Processor: % DPC Time for all processors on the computer, divided by the number of processors. System: % Total DPC Time is a component of System: % Total Privileged Time because DPCs are executed in privileged mode. DPCs are counted separately and are not a component of the interrupt count. This counter displays the average busy time as a percentage of the sample time.
11
File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
I could not find the maximum value of the Counter key and help key, so I could not repair
Last Counter and Last Help key as discribed at SQL 2005 help. Which item correspond to
maximum value of the Counter key and help key?
I tried to correct Last Counter and Help key as:
"Last Counter"=dword:0000149c (5276)
"Last Help"=dword:0000149d (5277)
But it also doesn't work.
Long story short: Installed SQL Server 2005 Developers Edition along with Visual Studio 2005. Everything worked as it should.
Then there was a problem installing .NET Framework 2.0 Security Update. Fixed that by uninstall and reinstall of .NET Framework 2.0.
Now SQL Server does not work. So I figured uninstall/reinstall. Only problem is that it WILL NOT uninstall. I have tried to uninstall manually per KB article (9009967). That doesn't work either.
The error info that I'm geting is:
LinkID: 20476
Product Name: Microsoft SQL Server
Product Version: 9.00.2047.00
Message source: setup.rll
Message ID: 50000
EvtType: stateengine
esourcemodule.cpp@ScheduleActionAction@sqls::ResourceModule::LoadStringW@0x716
I get the same data during setup or uninstall. Neither of which completes.
Needless to say this is driving me nuts. I'm trying to learn VB.NET programming and many of the examples use SQL Server.
Any help would be appreciated.
Hi I installed SQL server 2005 Express and it was successfully set up but I kept on getting error 26 when I try to connect to a database, so I remove all SQL programs from the control panel and reinstall SQL server 2005, but this time the set up stopped halfway saying "cannot start server". How can I successfully reinstall SQL server 2005 express?
View 11 Replies View RelatedI am attempting to Insert multiple rows in a table by passing DataTable to a Stored Proc. My code is the same as the examples on the net, however when I execute the code I receive the Subquery returned more than 1 value error.
I first created up a User-Defined Table Type
My stored proc is as follows:
ALTER PROCEDURE [KCC].[Insert_MaterialJobMtl]
@MtlTblMaterialType READONLY
AS
BEGIN
Set NOCOUNT ON;
[code]....
I uninstalled a previous version of SQL Server 2000 Developer because it had some custom configurations that I didn't want. When I try to re-install, I get an error message saying:
A previous program installation created pending file operations on the installation machine. You must reboot the computer before running setup.
I don't know what other programs affect SQL that I have on my machine. My previous instance only contained two known databases and I have deleted the applications that went with those databases.
I have deleted all known registry settings for SQL Server. I have also stopped the IIS service because I thought it would impact the install.
I rebooted my machine, but I still get the same error when I try to install. I don't know what to do next? Please help!
I've got a Windows Server 2003 for Small Business Server. It had got SQL installed. But then SQL was uninstalled. Now I need to put SQL back in, but I don't see how!
There're three CD-Rom but I don't see how and from which CD to install back SQL.
PS: Correct me if I'm wrong, Windows Server 2003 is sold with SQL 2005, right?
I had to uninstall SQl Server 2005 Developer Edition because of hardware requirements, and reinstall Express Edition download version.
But SQL Server Database Services fails with this message:
SQL Server Setup has determined that the following account properties are not specified: 'AGTACCOUNT' . Error Code: 28006.
The first time I installed Express the flow of setup ended well without any message. How to act?
I can€™t use the DTS editor because shows an error.
So, I want to reinstall the enterprise manager without uninstall the sql server 2000, Is that possible?
If the answer is yes, How can I do that?
I think that reinstalling only the Enterprise Manager the DTS editor can be fixed.
Sql Version: Sql Server 2000
SO: Windows 2003 Server
Tanks in advance
Ariel.
Something happened when the server fall down because of no disk space.
Now everything is fine but I have a problem in de DTS (from the Enterprise Manager) editor, I can€™t run, modify and even make a new DTS.
What can I do? Is it possible reinstall de DTS components without reinstall sqlserver 2000?
Sql Version: sqlserver2000 Enterprise
SO Version: Windows 2003 Server
Thanks in advance
Ariel.
hi friends, i need a code for storing and receiving an image to/fro SQL SERVER 2000 (in C#). i had searched some sites, all are in VB for windows forms not for website. finally i got a code from some site. it is working for storing purpose. not working for receiving purpose. the code for receiving and displaying purpose is (in a fresh page) private void Page_Load(object sender, System.EventArgs e){ // Put user code to initialize the page here MemoryStream stream = new MemoryStream (); SqlConnection connection = new SqlConnection (@"server=INDIAINDIA;database=iSense;uid=sa;pwd=india"); try { connection.Open (); SqlCommand command = new SqlCommand ("select Picture from Image", connection); byte[] image = (byte[]) command.ExecuteScalar (); stream.Write (image, 0, image.Length); Bitmap bitmap = new Bitmap (stream); Response.ContentType = "image/gif"; bitmap.Save (Response.OutputStream, ImageFormat.Gif); } finally { connection.Close (); stream.Close (); }}what s the problem is.........i'm getting an exception at Bitmap instantiation.(i.e Bitmap bitmap = new Bitmap (stream);)exception is "Parameter is not valid" what is the problem with that coding? was it correct? do u have any code for this in C#? if so, pls provide that......help me........pls.............
View 2 Replies View RelatedHi all,
I
am trying to run a stored procedure which retreives 3 lakhs of records
and updates the data and moves few of those records to some tables.
Since the number of records are more , the time taken for the storede
procedure is around 30 minutes when i directly execute it in query
analyzer.
But I need to execute it from Visula Studio.Net 2005
(c#). Whole of the application contains only one form with a single
button.When I click on the button , this stored procure has to be
executed. But I am getting an error as shown below.
"A
transport-level error has occurred when receiving results from the
server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.)"
Database used is SqlServer 2000
How to solve this error?. Any ideas are really appreciated.
Thanks and Regards,
Sukanya.