Receiving Queue Does Not Fire Stored Procedure
Jul 3, 2007
I am doing my first SSB application where two different servers send messages to each other. The logic was all previously tested on a single server between two databases and it worked OK.
The problem I am having is that when the message is received at the target server (I see this in profiler), the stored procedure associated with the queue does not fire.
I see an acknowledgment fire back to the initiator, but it is like the target server does nothing with the initial message.
Any ideas on how I can further troubleshoot this? FWIW, I used the setup tool provided by RemusResanu to set up the routes and service bindings.
Thanks for any help!
John
View 6 Replies
ADVERTISEMENT
Oct 5, 2007
I've set up a Service Broker and it was working fine.
All of a sudden each time I switch on my computer it's not working anymore.
I have to drop the services, queues, contract and messages and create them again.
Then it works again until I shutdown my computer. When I start it again it's not working.
Any suggestion on how to fix this?
Thank you
View 8 Replies
View Related
Jul 12, 2006
Is it possible to receive from a queue by a conversation handle? In the documentation there is an example that show you how to do it. Yet, if you "read" the whole document it says that the conversation handle can not be an expression.
The WHERE clause of the RECEIVE statement may only contain search conditions that use conversation_handle or conversation_group_id. The search condition may not contain any of the other columns in the queue. The conversation_handle or conversation_group_id may not be an expression.
Here is what I'm trying to do:
;RECEIVE TOP(1) @MsgBody = CAST(message_body as XML)
FROM ProcessingLetters
WHERE conversation_handle = @Conversation_Handle
It doesn't seem to matter if I use RECEIVE or SELECT. It will return nothing.
I've even tried this:
where cast(Conversation_Handle as varchar(100)) = cast(@Conversation_Handle as varchar(100))
Why am I doing this? I've put something into the queue to let me know that something is processing. When it is done I want to pull it out and end the conversation.
So is the WHERE conversation_handle = @Conversation_Handle supposed to work?
Thanks.
View 22 Replies
View Related
Jul 3, 2006
Hi there .NET community.
I was wondering if there was a way to launch a stored procedure froman aspx page without the sqlCommand object sitting waiting for the sproc to return something.The procedure takes about 10 minutes to execute and the page timeouts.Is there a way to just execute the procedure and procede to the next line of script?
Thanks.
CaptainCrabs
View 3 Replies
View Related
Oct 10, 2001
Is this possible?
View 1 Replies
View Related
Jan 4, 2001
Is there a way to fire an alert from a stored procedure ?
thanks
View 1 Replies
View Related
Feb 23, 2005
Can someone post some code that shows a Stored Procedure receiving a cursor that it can process - lets say a group of order detail records are received that must be saved along with the single Order header record.
And, in another example, a SP returns a result set to the calling program. - For example, a particular sale receipt is pulled up on the screen and the order detail is needed.
Thanks for help on this,
Peter
View 14 Replies
View Related
May 14, 2008
The following query works fine in query analyzer, but when I add it to my stored procedure I receive an error 156. How do I work around this?
select distinct(dateposted)
from billingprocedures bp1,
billingprocedureordercomponentvalues bpocv,
ordercomponentvalues ocv
where bp1.billingid = @billingid
and bp1.procedureid = bpocv.billingprocedureid
and bpocv.ordercomponentvalueid = ocv.ordercomponentvalueid
Thanks,
Bryan
View 12 Replies
View Related
Sep 27, 2006
How can my receiver's queue procedure execute a procedure on another server?
Everytime it gets to that remote procedure statement, I get DISCONNECTED_INBOUND status.
The procedure I want to call is on SQL 2000.
View 9 Replies
View Related
Oct 23, 2006
I have an activated SP that is issuing PRINT statements.
These are raised as ErrorLog and EventLog events when using SQLProfiler
However if you attach an event notification for ERRORLOG and EVENTLOG, nothing appears in the queue. Any other ERRORLOG or EVENTLOG event caught by profiler is caught by the event notification as expected.
View 2 Replies
View Related
Aug 2, 2006
I set up a queue to activate a clr stored procedure upon receiving a message and nothing is happening. I have tried everything listed in this topic:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=200684&SiteID=1
except for saying "Recieve Top(0)" which didn't make any sense to me. I have set the database to trustworthy (all of this is taking place within a single database on a local server). There are messages on the queue, and I have the queue activation set to max_queue_readers=2, procedure_name=StoredProcedure1, execute as owner. I tried execute as self and that didn't work either. I signed the assembly that contains StoredProcedure1 and the assembly that it references. The only thing that appears in the sql error log is this (I trimmed off the timestamp):
AppDomain 15 (TriggerTest.dbo[runtime].14) is marked for unload due to common language runtime (CLR) or security data definition language (DDL) operations.
AppDomain 15 (TriggerTest.dbo[runtime].14) unloaded.
AppDomain 18 (TriggerTest.dbo[runtime].17) created.
If I call the stored procedure manually it works just fine
View 6 Replies
View Related
Jan 11, 2006
Hello,
This is info that I am still not certain about and I just need to make sure, my gut feeling is correct:
A.
When a procedure is triggered upon reception of a message in a queue, what happens when the procedure fails and rolls back?
1. Message is left on the Queue.
2. is the worker procedure triggered again for the same message by the queue?
3. I am hoping the Queue keeps on triggering workers until it is empty.
My scenario is that my queue reader procedure only reads one message at a time, thus I do not loop to receive many messages.
B.
For my scenario messages are independent and ordering does not matter.
Thus I want to ensure my Queue reader procedures execute simultaneously. Is reading the Top message in one reader somehow blocking the queue for any other reader procedures? I.e. if I have BEGIN TRANSACTION when reading messages of the Queue, is that effectively going prevent many reader procedures working simultaneously. Again, I want to ensure that Service broker is effectively spawning procedures that work simultaneously.
Thank you very much for the time,
Lubomir
View 5 Replies
View Related
Apr 20, 2007
Hi,
I am having an SQL CLR stored proc which looks like this in SQL Svr
CREATE PROCEDURE [dbo].[callspGetMessage]
@strMsg [nvarchar](4000) OUTPUT
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [GetSSBMSG].[StoredProcs].[callspGetMessage]
GO
EXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
GO
EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'StoredProcs.cs' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
GO
EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=14 ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
When I am trying to alter the queue to attach to this procedure using following code
alter queue q1 with activation (
status = on,
max_queue_readers = 1,
procedure_name = [callspGetMessage],
execute as owner);
I am getting following error.
The signature of activation stored procedure 'callspGetMessage' is invalid. Parameters are not allowed.
Parameters to the stored proc are not allowed or am I doing anything wrong.
Any help is greatly appreciated.
Thanks,
Don
View 2 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Jan 29, 2015
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
View 9 Replies
View Related
Sep 19, 2006
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
View 1 Replies
View Related
Dec 28, 2005
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies
View Related
Sep 26, 2014
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
View 3 Replies
View Related
Mar 28, 2007
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
View 9 Replies
View Related
Jan 23, 2008
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
View 1 Replies
View Related
Sep 13, 2007
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
View 3 Replies
View Related
Mar 31, 2008
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
View 1 Replies
View Related
Oct 10, 2006
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies
View Related
Nov 15, 2006
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
View 3 Replies
View Related
May 18, 2007
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
View 2 Replies
View Related
Apr 29, 2008
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
View 10 Replies
View Related
Apr 29, 2004
Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah
View 1 Replies
View Related
Mar 2, 2007
Hello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
View 6 Replies
View Related
May 16, 2008
Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
View 6 Replies
View Related
Aug 14, 2006
Hi Folks I hope every thing good.I have this problem I have a master page and an aspx page In aspx page there is an SqlDataSource Componant that call a storage prcedure from db that insert value to a certain table The issue here that he call the sp twice so the row record twince in the database What is the problem ?Thanks Bye
View 4 Replies
View Related
Jun 23, 2005
Hi there,
I am writing an SQL stored procedure that returns a dataset as well as
a return value. When I execute the stored proc, all seems to
work, except the return value comes back as null.
Code:
// Create Instance of Connection and Command Object
SqlConnection
connection = new SqlConnection(ApplicationConfig.ConnectionString);
SqlCommand
command = new SqlCommand("SoundLeaf_GetPagedProductsByCategory",
connection);
// Mark the Command as a SPROC
command.CommandType = CommandType.StoredProcedure;
// Add Parameters to SPROC
SqlParameter
parameterID = new SqlParameter("@CategoryID", SqlDbType.Int);
parameterID.Value = categoryID;
command.Parameters.Add(parameterID);
SqlParameter
parameterPageIndex = new SqlParameter("@PageIndex", SqlDbType.Int);
parameterPageIndex.Value = pageIndex;
command.Parameters.Add(parameterPageIndex);
SqlParameter
parameterRowCount = new SqlParameter("@RowCount", SqlDbType.Int);
parameterRowCount.Value = rowCount;
command.Parameters.Add(parameterRowCount);
SqlParameter
parameterPageCount = new SqlParameter("@PageCount", SqlDbType.Int);
parameterPageCount.Direction = ParameterDirection.Output;
command.Parameters.Add(parameterPageCount);
// Open the connection and execute the Command
connection.Open();
SqlDataReader
dr = command.ExecuteReader(CommandBehavior.CloseConnection);
pageCount =
(int)command.Parameters["@PageCount"].Value; // Null Reference Exception
}
SQL:
CREATE PROCEDURE GetPagedProductsByCategory]
(
@CategoryId int = 0,
@PageIndex int = 1,
@RowCount int = 10,
@PageCount int OUTPUT
)
AS
Declare @TotalRows int, @StartPosition int
Declare @PK int
DECLARE @tmpTable TABLE (
PK int NOT NULL PRIMARY KEY
)
SELECT @StartPosition = (((@PageIndex - 1) * @RowCount) + 1)
Set @TotalRows = @StartPosition + @RowCount
Set RowCount @TotalRows
DECLARE PagingCursor CURSOR DYNAMIC READ_ONLY FOR
select a.ProductId
from
products a,
categoryProducts b
where
b.categoryid = @CategoryID and
b.productid = a.productid
Order By a.productid
Open PagingCursor
Fetch Relative @StartPosition From PagingCursor Into @PK
while (@RowCount <> 0) And (@@Fetch_Status = 0)
begin
Insert Into @tmpTable (PK)
Values (@PK)
Fetch Next From PagingCursor Into @PK
Set @RowCount = @RowCount - 1
end
Close PagingCursor
Deallocate PagingCursor
Select Products.* From Products
Join @tmpTable temp ON Products.ProductID = temp.PK
Order By Products.ProductID
SELECT @PageCount = COUNT(*) / @RowCount FROM Products // value is never returned
Set RowCount 0
GO
Any thoughts?
JR
View 6 Replies
View Related
