I've set up a Service Broker and it was working fine.
All of a sudden each time I switch on my computer it's not working anymore.
I have to drop the services, queues, contract and messages and create them again.
Then it works again until I shutdown my computer. When I start it again it's not working.
Any suggestion on how to fix this?
Thank you
I am doing my first SSB application where two different servers send messages to each other. The logic was all previously tested on a single server between two databases and it worked OK.
The problem I am having is that when the message is received at the target server (I see this in profiler), the stored procedure associated with the queue does not fire.
I see an acknowledgment fire back to the initiator, but it is like the target server does nothing with the initial message.
Any ideas on how I can further troubleshoot this? FWIW, I used the setup tool provided by RemusResanu to set up the routes and service bindings.
Thanks for any help!
John
Is it possible to receive from a queue by a conversation handle? In the documentation there is an example that show you how to do it. Yet, if you "read" the whole document it says that the conversation handle can not be an expression.
The WHERE clause of the RECEIVE statement may only contain search conditions that use conversation_handle or conversation_group_id. The search condition may not contain any of the other columns in the queue. The conversation_handle or conversation_group_id may not be an expression.
Here is what I'm trying to do:
;RECEIVE TOP(1) @MsgBody = CAST(message_body as XML)
FROM ProcessingLetters
WHERE conversation_handle = @Conversation_Handle
It doesn't seem to matter if I use RECEIVE or SELECT. It will return nothing.
I've even tried this:
where cast(Conversation_Handle as varchar(100)) = cast(@Conversation_Handle as varchar(100))
Why am I doing this? I've put something into the queue to let me know that something is processing. When it is done I want to pull it out and end the conversation.
So is the WHERE conversation_handle = @Conversation_Handle supposed to work?
Thanks.
Can someone post some code that shows a Stored Procedure receiving a cursor that it can process - lets say a group of order detail records are received that must be saved along with the single Order header record.
And, in another example, a SP returns a result set to the calling program. - For example, a particular sale receipt is pulled up on the screen and the order detail is needed.
Thanks for help on this,
Peter
I have a stored procedure that is calling a cursor to populate some variables it then uses those variable to get more information and then inserts that info into a final table. The estimated number of records that it should insert is around 2 million. The procedure stops after about 6000 records inserted. It still apears to be running but in fact is not. Can anyone help? I have also attached the code.
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
ALTER PROCEDURE [dbo].[create_table1_tmp] AS
/* table1 variables */
declare@v_ARCKEY int
declare@v_INVKEY int
declare@v_ITEM char (15)
declare@v_BRAND char(15)
declare@v_PRICE decimal(12, 2)
declare@v_QTYORD decimal(12, 3)
declare@v_QTYSHP decimal(12, 3)
declare@v_CTCKEY int
declare@v_SOMKEY int
declare@v_ORDATE datetime
declare@v_FNAME char (15)
declare@v_CONTACT varchar (20)
declare@v_TITLE varchar (25)
declare@v_SALUT char (4)
declare@v_DEGREE char (6)
declare@v_SALESMN2char (3)
declare@v_TTL_CODEchar (4)
declare@v_SPECIALTYvarchar (30)
declare@v_COMPANYvarchar (35)
declare@v_ADDRESS1varchar (50)
declare@v_ADDRESS2varchar (50)
declare@v_CITYvarchar (20)
declare@v_STATEchar (10)
declare@v_KEYCODEchar (10)
declare@v_ZIPchar (10)
declare@v_COUNTRYchar (2)
declare@v_ARCSOURCEchar (5)
declare@v_SLSVOLchar (1)
declare@v_TYPEchar (8)
declare@v_NUMDRSdecimal(9,0)
declare@v_BEDSIZEdecimal(4,0)
declare@v_NUMLIVESdecimal(9,0)
declare@v_CODEchar (3)
declare@v_SUBKEYint
declare@v_SUBTYPEchar (1)
declare@v_STARTDATEdatetime
declare@v_TERMdecimal(2, 0)
declare@v_STATUSchar (1)
declare@v_STATDATEdatetime
declare@v_XRENEWEDdecimal(2, 0)
declare@v_EXPDATEdatetime
declare@v_SHPAMTdecimal(12, 2)
declare@v_SOMSOURCEchar (5)
declare@v_PMETHchar (1)
declare@v_EXTPRICEdecimal(12, 2)
declare@v_CTYPEchar (5)
declare@v_CTCKEY_SBSUBS int
declare@v_ACRONYMchar (8)
declare@v_PONUMvarchar (20)
declare@v_EMAILvarchar (50)
declare@v_ARCPHONEVARCHAR (20)
declare@v_ARCFAXNOVARCHAR (20)
declare@v_CMCPHONEVARCHAR (20)
declare@v_CMCFAXNOVARCHAR (20)
declare@v_DOFAXTINYINT
declare@v_DOPHONETINYINT
declare@v_DORENEWTINYINT
declare@v_DOMAILTINYINT
declare@v_DOUPDATETINYINT
declare@v_UPDONLYTINYINT
declare@v_EMAIL_INFOTINYINT
declare@v_EMAILPROMOTINYINT
declare@v_DISCdecimal(7,3)
declare @v_EUPDATETINYINT
/* processing Variables */
declare @v_tmpint
declare@v_amtdecimal(9,3)
declare@v_loopint
declare@v_arckey_tmp INT
declare@v_ctckey_tmp INT
declare@v_invkey_tmp INT
declare@v_subkey_tmp INT
declare@v_arcDORENEW TINYINT
declare@v_cmcDORENEW TINYINT
declare@v_sbsDORENEW TINYINT
declare@v_arcDOFAX TINYINT
declare@v_cmcDOFAX TINYINT
declare@v_arcDOMAIL TINYINT
declare@v_cmcDOMAIL TINYINT
declare@v_arcDOPHONE TINYINT
declare@v_cmcDOPHONE TINYINT
/* cursors for retrieving online data*/
declarev_mast cursor for
select /*+ INDEX_COMBINE(arc) */
som.arckey arckey,
sot.invkey invkey,
sot.item item,
sot.price price,
sot.qtyord qtyord,
sot.qtyshp qtyshp,
som.ctckey ctckey,
som.somkey somkey,
sot.ordate ordate,
arc.phone arcphone,
arc.faxno arcfaxno,
arc.salesmn2 salesmn2,
arc.country country,
arc.source arcsource,
arc.slsvol slsvol,
arc.type type,
arc.specialty specialty,
arc.numdrs numdrs,
arc.bedsize bedsize,
arc.numlives numlives,
arc.code code,
arc.dorenew arcdorenew,
arc.company company,
arc.address1 address1,
arc.address2 address2,
arc.city city,
arc.state state,
arc.zipzip,
sub.eupdate eupdate,
sub.doupdate doupdate,
sub.subkey subkey,
sub.subtype subtype,
sub.startdate startdate,
sub.term term,
sub.status status,
sub.statdate statdate,
sub.xrenewed xrenewed,
sub.dorenew sbsdorenew,
som.shpamt shpamt,
som.source somsource,
som.pmeth pmeth,
sub.ctckey ctckey_sbsubs,
sub.updonly updonly,
sot.disc disc,
arc.dofax arcdofax,
som.ponum,
arc.domail,
arc.dophone
from sotran sot,somast som, arcust arc,sbsubs sub
where (som.arckey != '121449' and som.arckey != '1364166')
and (som.sotype not in (
select value from table1_param
where name = 'sotype') or
som.sotype is null)
and (som.sostat not in (
select value from table1_param
where name = 'somstat') or
som.sostat is null)
and arc.arckey = som.arckey
and (arc.code not in (
select value from table1_param
where name = 'code') or
arc.code is null)
and (arc.slsvol not in (
select value from table1_param
where name = 'slsvol') or
arc.slsvol is null)
and arc.foreign_ = 0
and sot.somkey = som.somkey
and (sot.sostat not in (
select value from table1_param
where name = 'sotstat') or
sot.sostat is null)
and sot.item > '0100'
and sub.subkey =* sot.subkey
order by arc.arckey,som.ctckey,sot.invkey,sub.subkey,sot.rq date desc
-- BEGIN PROCESSING THE CURSOR DATA HERE
OPEN v_mast
--pull all somast records where custno isn't 121449 or 1364166
--and sotype filtered and sostat isnot filtered
set @v_loop = 0
fetch next from v_mast into @v_arckey, @v_invkey, @v_item, @v_price, @v_qtyord,
@v_qtyshp, @v_ctckey, @v_somkey, @v_ordate, @v_arcphone, @v_arcfaxno, @v_salesmn2, @v_country,
@v_arcsource, @v_slsvol, @v_type, @v_specialty, @v_numdrs, @v_bedsize, @v_numlives,
@v_code, @v_arcdorenew, @v_company, @v_address1, @v_address2, @v_city,
@v_state, @v_zip, @v_eupdate, @v_doupdate, @v_subkey, @v_subtype, @v_startdate, @v_term, @v_status,
@v_statdate, @v_xrenewed, @v_sbsdorenew, @v_shpamt, @v_somsource, @v_pmeth, @v_ctckey_sbsubs,
@v_updonly, @v_disc, @v_arcdofax, @v_ponum, @v_arcdomail, @v_arcdophone
while @@fetch_status = 0--for v_rec in v_mast loop
Begin
set @v_loop = @v_loop + 1
set @v_expdate = dateadd(month,@v_term,@v_startdate) - 1
set @v_keycode = ''
--select company, address1, address2, city, state, zip
--from cmcship
--where ctckey = @v_ctckey
--if (@@rowcount = 0)
--set @v_tmp = null
--else
--begin
begin tran t1
set @v_company = (select top 1 company from cmcship where ctckey = @v_ctckey)
set @v_address1 = (select top 1 address1 from cmcship where ctckey = @v_ctckey)
set @v_address2 = (select top 1 address2 from cmcship where ctckey = @v_ctckey)
set @v_city = (select top 1 city from cmcship where ctckey = @v_ctckey)
set @v_state = (select top 1 state from cmcship where ctckey = @v_ctckey)
set @v_zip = (select top 1 zip from cmcship where ctckey = @v_ctckey)
commit tran t1
--end
--select company, address1, address2, city, state, zip
--from cmcadd
--where ctckey = @v_ctckey
--if (@@rowcount = 0)
--set @v_tmp = null
--else
--begin
begin tran t2
set @v_company = (select top 1 company from cmcadd where ctckey = @v_ctckey)
set @v_address1 = (select top 1 address1 from cmcadd where ctckey = @v_ctckey)
set @v_address2 = (select top 1 address2 from cmcadd where ctckey = @v_ctckey)
set @v_city = (select top 1 city from cmcadd where ctckey = @v_ctckey)
set @v_state = (select top 1 state from cmcadd where ctckey = @v_ctckey)
set @v_zip = (select top 1 zip from cmcadd where ctckey = @v_ctckey)
commit tran t2
--end
--select fname, contact, title, salut, degree, phone, faxno, ttl_code, dorenew,
--ctype, email, dofax, domail, email_info, emailpromo, docall
--from cmctac
--where ctckey = @v_ctckey
--if (@@rowcount = 0)
--RAISERROR ('cmc not found', 16, 1)
--else
--Begin
begin tran t3
set @v_fname = (select top 1 fname from cmctac where ctckey = @v_ctckey)
set @v_contact = (select top 1 contact from cmctac where ctckey = @v_ctckey)
set @v_title = (select top 1 title from cmctac where ctckey = @v_ctckey)
set @v_salut = (select top 1 salut from cmctac where ctckey = @v_ctckey)
set @v_degree = (select top 1 degree from cmctac where ctckey = @v_ctckey)
set @v_cmcphone = (select top 1 phone from cmctac where ctckey = @v_ctckey)
set @v_cmcfaxno = (select top 1 faxno from cmctac where ctckey = @v_ctckey)
set @v_ttl_code = (select top 1 ttl_code from cmctac where ctckey = @v_ctckey)
set @v_cmcdorenew = (select top 1 dorenew from cmctac where ctckey = @v_ctckey)
set @v_ctype = (select top 1 ctype from cmctac where ctckey = @v_ctckey)
set @v_email = (select top 1 email from cmctac where ctckey = @v_ctckey)
set @v_cmcdofax = (select top 1 dofax from cmctac where ctckey = @v_ctckey)
set @v_cmcdomail = (select top 1 domail from cmctac where ctckey = @v_ctckey)
set @v_email_info = (select top 1 email_info from cmctac where ctckey = @v_ctckey)
set @v_emailpromo = (select top 1 emailpromo from cmctac where ctckey = @v_ctckey)
set @v_cmcdophone = (select top 1 docall from cmctac where ctckey = @v_ctckey)
commit tran t3
--end
--select acronym, brand from invhead
--where invkey = @v_invkey
--if (@@cursor_rows = 0)
--set @v_tmp = null
--else
--begin
begin tran t4
set @v_acronym = (select top 1 acronym from invhead where invkey = @v_invkey)
set @v_brand = (select top 1 brand from invhead where invkey = @v_invkey)
commit tran t4
--end
set @v_amt = ((@v_qtyshp+@v_qtyord)*@v_price *(100-@v_disc))*.01
if @v_amt < 0
set @v_extprice = round(@v_amt,2)
else
set @v_extprice = round(@v_amt,2)
if (@v_arcdomail = 0 or @v_cmcdomail = 0)
set @v_domail = 0
else
set @v_domail = 1
if (@v_arcdofax = 0 or @v_cmcdofax = 0)
set @v_dofax = 0
else
set @v_dofax = 1
if (@v_arcdophone = 0 or @v_cmcdophone = 0)
set @v_dophone = 0
else
set @v_dophone = 1
if ((@v_arcdorenew = 0 or @v_cmcdorenew = 0) or @v_sbsdorenew = 0)
set @v_dorenew = 0
else
set @v_dorenew = 1
-- remove all but the newest orders
if @v_arckey = @v_arckey_tmp and @v_ctckey = @v_ctckey_tmp and
@v_invkey = @v_invkey_tmp and ((@v_subkey is null and
@v_subkey_tmp is null) or (@v_subkey = @v_subkey_tmp))
set @v_tmp = null
else
Begin
begin tran t5
set @v_arckey_tmp = @v_arckey
set @v_ctckey_tmp = @v_ctckey
set @v_invkey_tmp = @v_invkey
set @v_subkey_tmp = @v_subkey
commit tran t5
begin tran t6
insert into table1_tmp
(
arckey, invkey, item, brand, price, qtyord, qtyshp, ctckey, somkey,
ordate, fname, contact, title, salut, degree, salesmn2, ttl_code,
specialty, company, address1, address2, city, state, keycode,
zip, country, arcsource, slsvol, type, numdrs, bedsize, numlives,
code, subkey, subtype, startdate, term, status,
statdate, xrenewed,expdate, shpamt, somsource,
pmeth, extprice, ctype,ctckey_sbsubs, acronym,
ponum, email, arcphone, arcfaxno, cmcphone, cmcfaxno,
dofax, dophone, dorenew, domail, doupdate, updonly,
email_info, emailpromo, disc)
values (
@v_arckey, @v_invkey, @v_item, @v_brand, @v_price, @v_qtyord, @v_qtyshp,
@v_ctckey, @v_somkey, @v_ordate, @v_fname, @v_contact, @v_title,
@v_salut, @v_degree, @v_salesmn2, @v_ttl_code, @v_specialty, @v_company,
@v_address1, @v_address2, @v_city, @v_state, @v_keycode,
@v_zip, @v_country, @v_arcsource, @v_slsvol,
@v_type, @v_numdrs, @v_bedsize, @v_numlives, @v_code,
@v_subkey,@v_subtype, @v_startdate, @v_term, @v_status,
@v_statdate, @v_xrenewed, @v_expdate, @v_shpamt, @v_somsource,
@v_pmeth, @v_extprice, @v_ctype, @v_ctckey_sbsubs, @v_acronym,
@v_ponum, @v_email, @v_arcphone, @v_arcfaxno, @v_cmcphone,
@v_cmcfaxno, @v_dofax, @v_dophone, @v_dorenew, @v_domail,
@v_doupdate, @v_updonly, @v_email_info, @v_emailpromo, @v_disc
)
commit tran t6
End
fetch next from v_mast into @v_arckey, @v_invkey, @v_item, @v_price, @v_qtyord,
@v_qtyshp, @v_ctckey, @v_somkey, @v_ordate, @v_arcphone, @v_arcfaxno, @v_salesmn2, @v_country,
@v_arcsource, @v_slsvol, @v_type, @v_specialty, @v_numdrs, @v_bedsize, @v_numlives,
@v_code, @v_arcdorenew, @v_company, @v_address1, @v_address2, @v_city,
@v_state, @v_zip, @v_eupdate, @v_doupdate, @v_subkey, @v_subtype, @v_startdate, @v_term, @v_status,
@v_statdate, @v_xrenewed, @v_sbsdorenew, @v_shpamt, @v_somsource, @v_pmeth, @v_ctckey_sbsubs,
@v_updonly, @v_disc, @v_arcdofax, @v_ponum, @v_arcdomail, @v_arcdophone
end --while loop
close v_mast
deallocate v_mast
I have a stored procedure which does a simple select joining 3 tables.
This had been working fine for weeks and then just stopped returning any rows even though data existed for it to return.
After re-compiling the procedure, it worked fine as before.
Does anyone know of any reason why a procedure would need recompiling like this?
We have been doing data restores and also dropping/recreating tables during this development. Would any of this affect a procedure?
Hey all,
I've got a question and after doing some research I've found only a vague reference but no clear answer.
I have a java app that will be passing parameters to my stored procedure. I'll grab the requested info from the tables but instead of sending it back to the java app that sent the request, I need to send it to a "different" java app (the second java app will not be running at the time).
Can someone point me to a good source for executing java applications from a stored procedure?
Thanks in advance ...
tam
DESCRIPTION: I have an FTP server set up to log via ODBC into a table FTPLog. The trigger on table FTPLog fires when new files are received to process and load the file via a stored procedure.
CREATE TRIGGER tr_new_file ON FTPLog
AFTER INSERT
AS
SET NOCOUNT ON
DECLARE @filename varchar(50), @logtime datetime
DECLARE c1 CURSOR
FOR SELECT filename, logtime
FROM inserted
OPEN c1
FETCH NEXT FROM c1
INTO @filename, @logtime
WHILE @@fetch_status = 0
BEGIN
EXEC sp1 @filename, @logtime
FETCH NEXT FROM c_inserted
INTO @filename, @logtime
END
CLOSE c1
DEALLOCATE c1
END
PROBLEM: There are multiple problems with this setup. The first problem is that when the stored procedure gets executed it takes a long time to process the file and the FTP server never returned a completion code to the ftp client and ended with a connection time out from the client. My users keep asking if the FTP failed but it didnt fail. The server returned a completion code too late.
PROBLEM2: When multiple files are ftp to the server on the same session, only the first one gets process. Even though my code loops through all the records because the processing takes a long time the second one never gets executed. If I replace the EXEC sp1 statement with a PRINT statement then it's working fine.
SOLUTIONS and SUGGESTIONS highly appreciated.
The following query works fine in query analyzer, but when I add it to my stored procedure I receive an error 156. How do I work around this?
select distinct(dateposted)
from billingprocedures bp1,
billingprocedureordercomponentvalues bpocv,
ordercomponentvalues ocv
where bp1.billingid = @billingid
and bp1.procedureid = bpocv.billingprocedureid
and bpocv.ordercomponentvalueid = ocv.ordercomponentvalueid
Thanks,
Bryan
I need several stored procedures to fire on the 1st of every month. I was told my another developer I can possibly use SQL sever agent.
Any ideas????
I've written a stored procedure that copies records from tables in one database to the same tables in another database. Here is a snippet for a single table:
delete from washmaster_mirror.dbo.batches
DBCC CHECKIDENT (washmaster_mirror.dbo.batches', RESEED, 0)
alter table washmaster_mirror.dbo.batches disable trigger tr_BATCHES_INSERT
alter table washmaster_mirror.dbo.batches disable trigger tr_BATCHES_UPDATE
insert into washmaster_mirror.dbo.batches(processorid,batchnum,processdate,transcount,batchamount,dtmCreate,dtmUpdate,keypreserve)
(select processorid,batchnum,processdate,transcount,batchamount,dtmCreate,dtmUpdate,[ID]
from washmaster.dbo.batches)
alter table washmaster_mirror.dbo.batches enable trigger tr_BATCHES_INSERT
alter table washmaster_mirror.dbo.batches enable trigger tr_BATCHES_UPDATE
This kind of block is repeated in the same stored procedure for each table. There are 20 tables populated this way. The idea is to copy records from the working (washmaster) database to a mirror (washmaster_mirror) database then back up the mirror database so I can avoid having down time during the back up process (due to database locking).
The problem I have is that the above stored procedure sometimes causes the SQLEXPRESS service to stop, thus the Sql Express connection to break. I've checked the error logs and the event log (I'm running on Windows Vista) and nothing sheds light on the issue. When I originally coded the stored procedure I surrounded it by a TRY - CATCH block, which forced it to lose the connection every time. When I eliminated the TRY - CATCH block the broken connection issue became rare, but still occurs occasionally. Any ideas why this might be occuring or what I can do to solve it?
Thanks,
SJonesy
How can my receiver's queue procedure execute a procedure on another server?
Everytime it gets to that remote procedure statement, I get DISCONNECTED_INBOUND status.
The procedure I want to call is on SQL 2000.
I have a project that consists of a SQL db with an Access front end as the user interface. Here is the structure of the table on which this question is based:
Code Block
create table #IncomeAndExpenseData (
recordID nvarchar(5)NOT NULL,
itemID int NOT NULL,
itemvalue decimal(18, 2) NULL,
monthitemvalue decimal(18, 2) NULL
)
The itemvalue field is where the user enters his/her numbers via Access. There is an IncomeAndExpenseCodes table as well which holds item information, including the itemID and entry unit of measure. Some itemIDs have an entry unit of measure of $/mo, while others are entered in terms of $/yr, others in %/yr.
For itemvalues of itemIDs with entry units of measure that are not $/mo a stored procedure performs calculations which converts them into numbers that has a unit of measure of $/mo and updates IncomeAndExpenseData putting these numbers in the monthitemvalue field. This stored procedure is written to only calculate values for monthitemvalue fields which are null in order to avoid recalculating every single row in the table.
If the user edits the itemvalue field there is a trigger on IncomeAndExpenseData which sets the monthitemvalue to null so the stored procedure recalculates the monthitemvalue for the changed rows. However, it appears this trigger is also setting monthitemvalue to null after the stored procedure updates the IncomeAndExpenseData table with the recalculated monthitemvalues, thus wiping out the answers.
How do I write a trigger that sets the monthitemvalue to null only when the user edits the itemvalue field, not when the stored procedure puts the recalculated monthitemvalue into the IncomeAndExpenseData table?
I set up a queue to activate a clr stored procedure upon receiving a message and nothing is happening. I have tried everything listed in this topic:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=200684&SiteID=1
except for saying "Recieve Top(0)" which didn't make any sense to me. I have set the database to trustworthy (all of this is taking place within a single database on a local server). There are messages on the queue, and I have the queue activation set to max_queue_readers=2, procedure_name=StoredProcedure1, execute as owner. I tried execute as self and that didn't work either. I signed the assembly that contains StoredProcedure1 and the assembly that it references. The only thing that appears in the sql error log is this (I trimmed off the timestamp):
AppDomain 15 (TriggerTest.dbo[runtime].14) is marked for unload due to common language runtime (CLR) or security data definition language (DDL) operations.
AppDomain 15 (TriggerTest.dbo[runtime].14) unloaded.
AppDomain 18 (TriggerTest.dbo[runtime].17) created.
If I call the stored procedure manually it works just fine
Hello,
This is info that I am still not certain about and I just need to make sure, my gut feeling is correct:
A.
When a procedure is triggered upon reception of a message in a queue, what happens when the procedure fails and rolls back?
1. Message is left on the Queue.
2. is the worker procedure triggered again for the same message by the queue?
3. I am hoping the Queue keeps on triggering workers until it is empty.
My scenario is that my queue reader procedure only reads one message at a time, thus I do not loop to receive many messages.
B.
For my scenario messages are independent and ordering does not matter.
Thus I want to ensure my Queue reader procedures execute simultaneously. Is reading the Top message in one reader somehow blocking the queue for any other reader procedures? I.e. if I have BEGIN TRANSACTION when reading messages of the Queue, is that effectively going prevent many reader procedures working simultaneously. Again, I want to ensure that Service broker is effectively spawning procedures that work simultaneously.
Thank you very much for the time,
Lubomir
Hi,
I am having an SQL CLR stored proc which looks like this in SQL Svr
CREATE PROCEDURE [dbo].[callspGetMessage]
@strMsg [nvarchar](4000) OUTPUT
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [GetSSBMSG].[StoredProcs].[callspGetMessage]
GO
EXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
GO
EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'StoredProcs.cs' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
GO
EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=14 ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
When I am trying to alter the queue to attach to this procedure using following code
alter queue q1 with activation (
status = on,
max_queue_readers = 1,
procedure_name = [callspGetMessage],
execute as owner);
I am getting following error.
The signature of activation stored procedure 'callspGetMessage' is invalid. Parameters are not allowed.
Parameters to the stored proc are not allowed or am I doing anything wrong.
Any help is greatly appreciated.
Thanks,
Don
I have a trigger on a table that just updates a last_modified_date and this works fine on our production server. Now I have to update some data and I do not want the trigger to fire. I cannot disable or drop the trigger because the productions systems needs the trigger. Anyone an idea of how to solve this problem?
View 6 Replies View RelatedHi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedI have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah