I have a query pulling all records with a disconnect date and a transaction date. However, I would like to retrieve any records that have a transaction date greater than 30 days from the disconnect date. I have been unable to figure out the correct formula to use. I think I need to use the datediff function in SQL, but I've never really used this function before.
View 2 RepliesI want to split the data every employeid wise based on fromdate and todate if totaldays>1.
sample output specified below ....but same output required for allthe empid's
create table attendence(EmployeeID nvarchar(20),[From] datetime,[To] datetime,TotalDays float)
insert into attendence values('1417','2015-11-02 22:48:49.450','2015-11-04 22:48:49.450',3)
insert into attendence values('1418','2015-11-04 22:48:49.450','2015-11-04 22:48:49.450',1)
insert into attendence values('1419','2015-11-03 22:48:49.450','2015-11-04 22:48:49.450',2)
insert into attendence values('1420','2015-11-04 22:48:49.450','2015-11-05 22:48:49.450',2)
insert into attendence values('1421','2015-11-01 22:48:49.450','2015-11-04 22:48:49.450',4)
OP
-------------------------
EmployeeID [From] [To] TotalDays
1417 2015-11-02 22:48:49.450 2015-11-02 22:48:49.450 3
1417 2015-11-03 22:48:49.450 2015-11-03 22:48:49.450 3
1417 2015-11-04 22:48:49.450 2015-11-04 22:48:49.450 3
What I want to see is how to show PO's who's due dates are > three
Select * from mytable
where myorderstatus = 'onorder'
This is my duedate format and what I want is any that past that date over 3 days
2014-08-11 00:00:00.000
I am pulling data that shows appt information on a patient:
FName,LName, PhoneNumber, ApptDate, ApptTime, and Status that equals Active. I need to pull this info everyday. How can I set this up in a stored procedure to pull all this information automatically on a daily basis where it pulls by Appt Date that is 2 days greater than the current date?
Thanks!
Thanks!
Lisa
Hello,I am writing a query to select records added to a table today, in the last 3 days, in the last 7 days, and so on.Here is what I have (which seems that its not working exactly). -- total listed today
SELECT COUNT (*) FROM mytable WHERE DATEDIFF(Day, mydatecolumn, getdate() ) <= 0-- total listed yesterday
SELECT COUNT (*) FROM mytable WHERE DATEDIFF(Day, mydatecolumn, getdate() ) <= 1-- total listed in the last 3 days
SELECT COUNT (*) FROM mytable WHERE DATEDIFF(Day, mydatecolumn, getdate() ) <= 3I'd like to be able to select the count for records added within the last X number of days. Can someone please help me out? Thanks so much in advance.
Hello,
I would like to create a job that runs ones a day to delete records in a table that are older than one day. Any ideas?
Thanks,
Nina Melhem
Hello All,
Trying to set up a column in a grouped matrix that displays a count of all record over a specificed number.
The field I am counting are response time of transaction and I want to count how many were over 500 milliseconds. I though it would be something like this...
Code Snippet
=Count(Fields!ResponseTime.Value > "500")
However, this appears to just return the count of all rows and ignores the "500" part.
Am I missing something? If someone could post a alternate code snippet, that would be great.
Thanks in advance,
Clint
How can I select records from a schedule table that have end dates older than 90 days?
Can I do getdate() -90?
Code:
select *
from dbo.schedule
where enddate <> endate-(90 days?)
Hi Everyone,I use the following to get records from the last two days in MySql:where date_entered <= curdate() and date_entered >=DATE_SUB(curdate(),INTERVAL 2 day)I'm looking to do the same in MS-Sql server but I'm just not getting it.I've got this so far which does not work:where hit_date <= GETDATE() and hit_date >= DATE_SUB(GETDATE(),INTERVAL 2day)then I tried this:WHERE hit_date >= DATEDIFF(GETDATE(), (GETDATE()-2)>Essentially, I need all records from the last two days.Any help or guidance in this matter would be greatly appreciated.-JohnyB
View 5 Replies View RelatedHello,I am writing a SQL query to count records in a table from the last "X" number of days.There is a dateTime column that I want to base this off of:Lets say.. I want to count the records that were added in the last 3 days. What is the query I should use to get this value?Here is what I have and it seems to not be working correctly:SELECT @TotalListedLast3Days = COUNT (*) FROM myTable WHERE DATEDIFF(Day, DateAdded, getdate() ) <= 3Can someone help so I am able to get the count of records added in the last "X" days?Thank you very much.
View 2 Replies View RelatedWhat would my statement look like if I have a column in a table (SoftwareInstall) called InstalledOn which stores a date in shortDateString format and I want to select all the records where that date is <= 30 days previous to today's date. Any ideas?
View 1 Replies View RelatedI have a SQL Server 2K db with some 10 tables and I want to setup a nightly job to truncate all db records which are more than 15 days old. Can anyone provide me with steps involved? Any help will be highly appreciated.
View 3 Replies View RelatedOn a webform, I have three button ... [7 days] [15 days] [30 days]When the user clicks one of the buttons, I want to return their orders for the past X days. The WHERE clause would include something like this (for 7 days):WHERE (Order_Date BETWEEN CONVERT(DATETIME, GETDATE() - 7, 102) AND CONVERT(DATETIME, GETDATE(), 102))How do I parameterize the number of days?Thanks,Tim
View 2 Replies View RelatedHello ,
I am little confused in writing the exact query i.e filling the correct details in the query .
To simplify let me explain....
I am using the query as
delete MYTABLE
where datediff(dd,loaddate,getdate())>5
I have a table now with loadate column which gets the default date and time . The loadate shows correct date and time when the data was imported in the table .
Now suppose if i want to delete previous 5 days records from today
( for e.g today is 20/08/2002 3:40:00 PM ) ideally it should delete all records which are 5 days older from today . i.e from 20/08/2002 3:40:00 PM to 15/08/2002 3:40:00 PM )
But when i execute the datediff command , it deletes the records previous than 15/08/2002 till 15/08/2002.
The records from 15/08/2002 to 20/08/2002 remain intact .
I am getting some different results .
Am i missing something in the query or i am confused about the calculation of the dates the datediff command performs .
Is the logic correct or i am missing someting important ?
Thanks and Regards
Admin001
This is a follow on from one of my earlier threads where I was trying to return one specific record. In this case I am trying to return multiple records for the same person ID and within a number of days range. Snapshot of my date with same PersonID:
PersonID Arrival_Date Leaving_Date ArrivalID
======== ============ ============ =========
123456 01/12/2012 01/12/2013 arr_56464
123456 10/12/2012 10/12/2013 arr_56474
123456 13/12/2012 13/12/2013 arr_56494
And from this I want to check if one record's leaving date of the record is within 7 days of another record's arrival date. I also want to return the record that had a leaving date within 7 days of the next arrival date.I understand that if I self join on personID with the data above I will get 9 rows, for each row I will get 3 matches, I am using INNER JOIN to join to the same table but with a different alias so I assume this is the self join I should be using.
But then how do I process this? I would want to say for record 1 check the leaving date is within 7 days of arrival date of any other record matching that PersonId but not ArrivalID, and return both records.From my snapahot of code I would eventually want to return:
PersonID Arrival_Date Leaving_Date ArrivalID
======== ============ ============ =========
123456 10/12/2012 10/12/2013 arr_56474
123456 13/12/2012 13/12/2013 arr_56494
But can't seem to get this using a self join query like this:
select a.PersonID, a.Leaving_date,a.Arrival_Date,a.arrivalID
from arrivals a INNER JOIN arrivals b
ON b.personID = a.personID
WHERE
a.arrivalid != b.arrivalid
and DATEDIFF(DD, b.[Leaving_date], a.[Arrival_Date]) <=7
and DATEDIFF(DD, b.[Leaving_date], a.[Arrival_Date]) >=0
The topic pretty much sums up my question.
What would the sql query be to return only all the records in a table that are 45 days old from today.
Thank you for any help in this matter
Al
I want to get all records that are 7 days pass today's date and not equal to today's date. Don't know how to write it so I can get records 7 days old but with this procedure I'm still getting records that are due today. Hope this makes sense. Can someone assist me.
select * from libraryrequestwhere duedate > getdate() and duedate != getdate()
Hi ,
I have a scheduled job which does an text file import in my database . The data gets appended in my table every day from this import job .
Since my table is growing every day , i want to truncate the table after the data has been collected for three months i.e 90 days . The table will be empty and the new data will flow in through the import .
Any thoughts how to do it through query and schedule it ???
Thanks
I have a table of sample data
Samples(sample_no, sample_date..)
I have no idea how to do the following in sql server or if its even possible:
1. Calculate the difference in days between all samples.
2. Select the median result
Any trick to get this done would be really helpful
thanks,
DB
I have a table of sample data
Samples(sample_no, sample_date..)
I have no idea how to do the following in sql server or if its even possible:
1. Calculate the difference in days between all samples.
2. Select the median result
Any trick to get this done would be really helpful
thanks,
DB
If I have a table like this:
ID User Date
20 22 1-1-2013
21 22 1-1-2013
22 31 1-1-2013
23 22 1-1-2013
24 22 1-2-2013
25 22 1-2-2013
etc...
How can I get the count of records grouped by date and user?
Date 22 31
1-1-2013 3 1
1-2-2013 2 0
etc...
Is this possible?
I have these columns. TicketID, User, Date...I want to select 10 random tickets for each user for the past 30 days. I not sure whether to do this via sql or using VB in the report design.
View 5 Replies View RelatedI have an SQL code below which removes weekends and non working days when calculating days difference between two dates:
ce.enquiry_time represents when the enquiry was logged
(DATEDIFF(dd, ce.enquiry_time, getdate()) + 1)
-(DATEDIFF(wk, ce.enquiry_time, getdate()) * 2)
-(CASE WHEN DATENAME(dw, ce.enquiry_time) = 'Sunday' THEN 1 ELSE 0 END)
-(CASE WHEN DATENAME(dw, getdate()) = 'Saturday' THEN 1 ELSE 0 END)
-(SELECT COUNT(*) FROM nonworking_day WHERE nonworking_day.nonworking_date >= ce.enquiry_time AND nonworking_day.nonworking_date < dateadd(dd,datediff(dd,0,getdate()),1))
It works but I don't understand how it works it out. I am having issues understanding each coloured piece of code and how it works together.
I have a stored proc. in that proc i need to select a value based on which one is greater.
Here is a non working example
select
name,
if (truck1.age > truck2.age, truck1.age, truck2.age)
from person
left join truck truck1
on truck1.make = person.make
left join truck truck2
on truck2.make = person.make
Thanks in advance for any help with this
I'm trying to sniff or view a fairly large query that get's passed to my sql server.
The problem I'm having is that the dbcc inputbuffer only shows the first 255 chars of query and I need to see the whole thing.
Is there another method or a way to increase the size of this so I can see the whole query?
Thanks
- jeff
Hi Guys
I have a table with id, date column in it. How do i list all records which has date greater than 30 day?
Thanks
Is this Correct?
SELECT * FROM TABLE WHERE DATEDIFF(DAY, DATE, GETDATE()) > 30
I have a table which measures the changes in a feedback rating, measured by an integer. Most of my records are the same. Only the primary key & the timestamp change.
How do I query just the changes?
Example dataset:
idrating
15
25
35
45
56
66
[code]....
There are 20 rows & 5 changes. The query I want will result in just those that are different from the ones before them:
idrating
45
56
97
118
189
I use Microsoft SQL 2008
I was comparing diffrent columns and within those columns there are specific values. I want to get the greter values using SQL 2000
i want something like these but i think there was an error in scripting
CASE
WHEN a > b,c,d,e THEN a
WHEN b > a,c,d,e THEN b
WHEN c > a,b,d,e THEN c
WHEN d > a,b,c,e THEN d
WHEN e > a,b,c,d THEN e
END
Please help. Is there any possible way to implement this? Thank you.
The length of my query string is greater than 255 characters. SQL Server is truncating the query string when I assign it to a Local variable.
What should i do....???
Here is the first part of a query for MySQL that I am trying to get working on MSSQL:
Code:
SELECT n.*,
round((n.rgt-n.lft-1)/2,0) AS childs,
count(*)+(n.lft>1) AS level,
((min(p.rgt)-n.rgt-(n.lft>1))/2) > 0 AS lower,
(( (n.lft-max(p.lft)>1) )) AS upper
FROM table n
...
But, I get this error message:
Server: Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near '>'.
Is there a way to convert this? Thanks
I created this unique codes and I need all [FRMDAT] field set to "12/31/2014" in the MKLOPT table, where the [JOBCOD] in the VALUE list BELOW have a [FRMDAT] that is currently (greater than) > "12/31/2014"
VALUE LIST
PH00059
PH02775
PH03051
PH03305
PH03336
PH03342
PH03371
PH03992
PH03993
PH03994
im supposed to output the companies that have commission rates highter than company "Industrial Appparatus".
is there some whay to modify this code so that it will work?
commissionrate > ALL(Select commissionRate From salescompanydomestic Where companyName = 'Industrial Appparatus')
Problem: I want to set compatibility_level only when it is greater than 110.
Solution: Select the compatibility level and if it is greater than 110, I alter database set compatibility level=110
ISSUE Irrespective of IF Exist statement the alter database statement is executed all the time.
Here is the sql statement
IF EXISTS (
SELECT * FROM sys.databases where compatibility_level >110 AND name='mydatabase'
)
BEGIN
ALTER DATABASE mydatabase SET COMPATIBILITY_LEVEL = 110
END
What is that I am missing here ?