I have two dbs with the same table names and fields but different data. My connection is right, as well as my query.
How come that my program can't access the data from one table while the there's no problem with the another one? My recordset is empty even the record I'm searching for exists. It's rs.recordcount is -1. Is that database corrupted?
I am using ADODB.Recordset to retrieve the records from an MS Access database. The table has 11450 records and the recordset shows this number as the recordcount too. But when I try to fetch the records in a While loop using EOF as the check, I am able fetch only 4000 or so records. No error occurs and no exception is thrown. Control just comes out of the function. Why could this be happening?
Does Recordset have some limit on the number of records for Jet 4.0 provider?
Any help is appreciated.
I have a table defined as (int Row, int Column, money Data); as it were a matrix.
Which is the more efficient way of retrieving a result set with the following form?
Column1 Column2 Column3
---------- ----------- ----------
Data11 Data12 Data13
Data21 Data22 Data23
Data31 Data32 Data33
... ... ...
Thanks a lot in advance.
Hello!
I have 2 tables, one that contains a set of codes and their definitions, and another where each record has a field that contains several of these codes separated by commas:
Tab1
SubCode | Definition
---------------
S100 | Def of S100
S101 | Def of S101
S102 | Def of S102
Tab2
DepID | Purpcode |SubCodes
-----------------------------
1 | P100 | S100,S101,S102
1 | P101 | S100, S101
2 | P101 | S100,S102
I'm trying to create a query against Tab1 so that it retrieves a recordset of Subcodes and definitions based on the contents of the Subcodes field for a record in Tab2. I've tried this using a subquery, as follows:
SELECT SubCode ,Definition
FROM Tab1
WHERE SubjectCode IN
(SELECT CHAR(39) + REPLACE(SubjectCodes, CHAR(44), CHAR(39 + CHAR(44)+ CHAR(39)) + CHAR(39)
FROM Tab2
WHERE DepID = 1 AND PurposeCode = 'P101')
The subquery will return: 'S100','S101' and I expect the final recordset to be:
SubCode | Definition
---------------
S100 | Def of S100
S101 | Def of S101
However, it's not returning any records. If I execute the subquery separately and then plug its results into the main query e.g.
SELECT SubCode ,Definition
FROM Tab1
WHERE SubjectCode IN ('S100','S101')
it returns the expected recordset. Does anyone have any pointers? It's driving me nuts..
Cheers
Greg
Complete DDL, Sample Data, and Query below:
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[SubjectCodeDefinition]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[SubjectCodeDefinition]
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[DepartmentReturn]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[DepartmentReturn]
GO
CREATE TABLE [dbo].[SubjectCodeDefinition] (
[SubjectCode] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Definition] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[DepartmentReturn] (
[DeptID] [int] NULL ,
[PurposeCode] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[SubjectCodes] [varchar] (250) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
) ON [PRIMARY]
GO
INSERT INTO SubjectCodeDefinition(SubjectCode, Definition)
SELECT 'S100', 'Definition of Code S100' UNION ALL
SELECT 'S101', 'Definition of Code S101' UNION ALL
SELECT 'S102', 'Definition of Code S102' UNION ALL
SELECT 'S103', 'Definition of Code S103' UNION ALL
SELECT 'S104', 'Definition of Code S104' UNION ALL
SELECT 'S105', 'Definition of Code S105'
GO
INSERT INTO DepartmentReturn(DeptID,PurposeCode,SubjectCodes)
SELECT 1,'P100','S100,S101,S104' UNION ALL
SELECT 1,'P101','S102,S103' UNION ALL
SELECT 1,'P102','S100,S101,S105' UNION ALL
SELECT 2,'P100','S100,S101,S104,S105' UNION ALL
SELECT 2,'P103','S103,S104,S105' UNION ALL
SELECT 3,'P100','S100,S102,S104'
GO
SELECT SubjectCode ,Definition
FROM SubjectCodeDefinition
WHERE SubjectCode IN
(SELECT CHAR(39) + REPLACE(SubjectCodes, CHAR(44), CHAR(39)+ CHAR(44)+ CHAR(39)) + CHAR(39)
FROM DepartmentReturn
WHERE DeptID = 1 AND PurposeCode = 'P102')
Hello,
I am wondering what conversion rules apply, when a string, which contains a number, is saved to a SQL Server 2005 into a column of type decimal.
This is the code I€™m using (C++):
CString cValue = "0.75"
_variant_t vtFieldValue;
vtFieldValue = _variant_t(cValue)
pRecordSet->Fields->Item["MyColumn"]->Value = vtFieldValue;
"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".
The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.
I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.
So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?
Thank you for your help.
Regards,
Volker
Is it possible to create a recordset from two different datasources?
Such as
SELECT * FROM DataSource1.TableName WHERE ColumnName IN (SELECT Column FROM Datasource2.TableName)
Thanks.
Is it possible to create a recordset from two different datasources?
Such as
SELECT * FROM DataSource1.TableName WHERE ColumnName IN (SELECT Column FROM Datasource2.TableName)
Thanks.
I want to transfer a recordset (derived from an Oracle datasource) into
an SQL2000 Server table using VBScript in a ActiveX Script Task using a DTS.
Currently I use the OPENROWSET (and OPENQUERY) method, however
the lenght of the querytext seems to be limited to 8192 bytes.
At this moment I have reached the limit of this lenght, and I am looking
for a solution.
Futher info: The query returns large recordsets of 100,000s of records with 100s of columns. Because of it's complex structure, the standard data transformation in SLQ2000 is not an option.
Using a substitute like:
varRecords = rst1.GetRows
For intI = 0 To UBound(varRecords, 2)
rst2.AddNew
For intJ = 0 To UBound(varRecords, 1)
rst2(intJ) = varRecords(intJ, intI)
Next
Next
rst2.Update
works fine but is much to slow.
Can anyone help me to find a solution?
Dear All,
I hope someone can help me in this problem. I create the Procedure to generate the dynamic SQL statement, and execute the dynamic SQL at end of the Procedure. When I done in Server Management Studio, all thing is OK, return me the record.
But when i use it in ASP, the statement as below
Code Block
Dim objCmd
Set objCmd = Server.CreateObject("ADODB.Command")
With objCmd
set .ActiveConnection = objCn
.CommandText = "MyProcedure"
.CommandType = 4
.Parameters.Append = .CreateParameter("@Par1", 200, 1, 10, Par1)
.Parameters.Append = .CreateParameter("@Par2", 200, 1, 8, Par2)
.Parameters.Append = .CreateParameter("@Par3", 200, 1, 1, Par3)
Set objRs = .Execute ()
If Not objRs.EOF Then
ID = objRs.Fields.Item (0).value
Name = objRs.Fields.Item (1).value
End If
objRs.close
End With
set ObjCmd = nothing
The Error below display, Why??
Code BlockError Type:
ADODB.Recordset (0x800A0E78)
Operation is not allowed when the object is closed.
And this is work fine in SQL 2000 before
Is there a way to return just the raw data from a report? I do not mean XML rending which marries the dataset information with the layout information. I just want the raw data from the dataset. If the XML returned was the result of the recordset from the de-parameteraized query only that would be great!
I am looking into writing a Custom Rendering Extension, but I am not fining much outside of the same MS example circulating. It seems to only deal with layout data and not the raw dataset data.
Is there way to get to just the raw data and ignore layout? Is the dataset in the SSRS Temp Dd that you can query after a report has run? If anyone knows of any way to get to the raw data that would be fantastic.
Thanks!
I have been using a recordset destination in a data flow where I need to perform some complex manipulation on a dataset, including combining some information from a web service and updating records that already exist, vs. inserting them.
I have a script task that modifies the dataset as needed, and then saves it back to the variable it came from.
However, when it comes time to write the data to the database, I couldn't find an appropriate tool - there's no "recordset source" object in the data flow task, and use of a "for each" loop with a sql call to a stored proc takes 20 minutes for a few thousand rows.
The best way I could find around this was as follows:
Call the .NET ".GetXML" method on the dataset and put the resulting XML data into a string variable
Generate an XSD for that XML (it comes out like <NewDataSet><Table1>...)
Use an XML source in the data flow task.This works, and the same data insert that took 20 minutes via the loop / stored procs now takes under 10 seconds.
It seems horribly inefficient to have to do this - there should be a way to just dump my dataset back into a table natively without all that extra stuff.
Anyone done anything simillar?
I am having a problem writing a large amount of ntext data to a field within an ADO recordset. I am using the append chunk method but it does not seem to work. The SQL 7 field will hold the data its only about 60K.
View 1 Replies View RelatedI am new to this forum so I am not sure if this is posted in the appropriate group.
Okay - this may be a silly question - what is a crosslink table? Is this easily achieved in the MySQL query browser? Here is some more details on what I am trying to achieve. I have seen it done but not sure where to start....
The products correspond as follows:
- To be eligible for 'product a' the buyer must meet two qualifications:
1. Specify their 'model of their engine.'
2. Specify the 'year' of their engine.
Is there a way to structure my tables so that if a person specifies 'a specific year' and 'specific model' the correct product A, B, or C will pull up for them?
Do I create separate tables named 'Engine Model' and 'Engine Year' -- and then link to the product table with foreign keys? If so, how do I specify more than one grouping. For example product A is compatible with 2004-2007 engines and 10 different engine models.
I am new to mySql -- but a quick study -- hopefully this is easy to implement.
thanks.
Hi there,
I need to develop a module and wondering what would be the best implementation...
I get a list of files from a text file and store it in a Recordset Destination (object variable "CUST_INV_LIST").
I need to check that all the files in a directory are in the list. I can loop through the files in the directory using a ForEach container, but how do I check if it is in the CUST_INV_LIST recordset?
I thought about using another ForEach container to loop through the recordset, check if the physical file is equal to that row, if so set a flag, ... but it's neither elegant nor effective.
Another option would be to use a Script Task to search for the physical file name in the recordset. I tried with the Data.OleDb.OleDbDataAdapter, etc. but I get and error when I declare Data.DataTable. Anyways that method of accessing a recordset is not recommanded and seems complicated.
Any suggestion?
Thanks
I have an update query in an OLE DB Destination (access mode: SQL Command) that updates a table with an INNER JOIN from another table in another database. I'm getting the error, "No disconnected recordset available for the specified SQL statement". Does this have to do with the SQL query trying to access the other database? How can I get around this error?
View 4 Replies View RelatedI'm trying to figure this out
I have a store procedure that return the userId if a user exists in my table, return 0 otherwise
------------------------------------------------------------------------
Create Procedure spUpdatePasswordByUserId
@userName varchar(20),
@password varchar(20)
AS
Begin
Declare @userId int
Select @userId = (Select userId from userInfo Where userName = @userName and password = @password)
if (@userId > 0)
return @userId
else
return 0
------------------------------------------------------------------
I create a function called UpdatePasswordByUserId in my dataset with the above stored procedure that returns a scalar value. When I preview the data from the table adapter in my dataset, it spits out the right value.
But when I call this UpdatepasswordByUserId from an asp.net page, it returns null/blank/0
passport.UserInfoTableAdapters oUserInfo = new UserInfoTableAdapters();
Response.Write("userId: " + oUserInfo.UpdatePasswordByUserId(txtUserName.text, txtPassword.text) );
Do you guys have any idea why?
Te first record of a Recordest obtained from a Command Object executing a Stored Procedure, doesn't show the first record when I asociate this to a data report.(VB6 - SQL7) (ADO 2.1)
If I execute the stored procedure directly from query analizer, I have obtained the right resultset.
Does anyone Knows what could be happening?
Thank You ...
I'm running the following SQL query from LabVIEW, a graphical programming language, using the built in capabilities it has for database connectivity:
   DECLARE @currentID int
   SET @currentID = (SELECT MIN(ExperimentID) FROM Jobs_t WHERE JobStatus = 'ToRun');
   UPDATE [dbo].[Jobs_t]
   SET [JobStatus] = 'Pending'
   WHERE ExperimentID = @currentID;
   SELECT @currentID AS result
<main.img>
This is the analogous code to main() is a C-like language. The first block, which has the "Connection Information" wire going into it, opens a .udl file and creates an ADO.NET _Connection reference, which is later used to invoke methods for the query.
<execute query.img>
This is the inside of the second block, the one with "EXE" and the pink wire going into it. The boxes with the gray border operate much like "switch" statements. The wire going into the "?" terminal on these boxes determines which case gets executed. The yellow boxes with white rectangels dropping down are invoke nodes and property nodes; they accept a reference to an object and allow you to invoke methods and read/write properties of that object. You can see the _Recordset object here as well. <fetch recordset.img>
Here's the next block to be executed, the one whose icon reads "FETCH ALL". We see that the first thing to execute on the far left grabs some properties of the recordset, and returns them in a "struct" (the pink wire that goes into the box that reads "state"). This is where the code fails. The recordset opened in the previous VI (virtual instrument) has a status of "closed", and the purple variant (seen under "Read all the data available") comes back empty.
The rest of the code is fairly irrelevant, as it's just converting the received variant into usable data, and freeing the recordset reference opened previously. My question is, why would the status from the query of the recordset be "closed"? I realize that recordsets are "closed" when the query returns no rows, but executing that query in SSMS returns good data. Also, executing the LabVIEW code does the UPDATE in the query, so I know that's not broken either.
Good day., please help me,in a formview control, i set it in Insert Mode, so it should display info from table 1 but when i click on the insert button, it will insert it in table 2.btw, table 1 and table 2 are in the same database?? how about if they are not in the same database?how?please help me,Thanks.,SALAMAT PO.,
View 3 Replies View RelatedHey All,
I am developing a data acquistion system which monitors the amount of energy that a user consumes in different parts of a house and displays the information in real time on their computer screen. I am collecting the data through tranducers attached to the circuit breakers in the breaker box and sending the data to analog-to-digital converter channels in a MCU. I am retrieving the data from the serial port and storing it to a text file. Each line of data in the text file represents three fields which are separated by commas. I will be reading data from multiple data collection boxes so the first field is the unit number, the second fied represents the analog-to-digital converter channel number from each unit, and the third field is the data that is collected from the ATD channel. I am trying to use SSE to retrieve the data from the text file, and parse each line of data into individual columns in a databse. Then I want to be able to extract the data associated with a particular ATD channel number from the databse and display it in the appropriate text field on a windows form.
I've got the MCU programmed. I have no problem collecting the data from the serial port, and I can do the visual basic programming okay. I have absolutely no clue how to read the data into the database, continuosly read new values into the databse, and then access the stored data to update the text fields on the form. Please help if you can, I've been working on this specific problem for a couple of weeks and I'm not making any progress. Thanks.
Hey All,
I am developing a data acquistion system which monitors the amount of energy that a user consumes in different parts of a house and displays the information in real time on their computer screen. I am collecting the data through tranducers attached to the circuit breakers in the breaker box and sending the data to analog-to-digital converter channels in a MCU. I am retrieving the data from the serial port and storing it to a text file. Each line of data in the text file represents three fields which are separated by commas. I will be reading data from multiple data collection boxes so the first field is the unit number, the second fied represents the analog-to-digital converter channel number from each unit, and the third field is the data that is collected from the ATD channel. I am trying to use SSE to retrieve the data from the text file, and parse each line of data into individual columns in a databse. Then I want to be able to extract the data associated with a particular ATD channel number from the databse and display it in the appropriate text field on a windows form.
I've got the MCU programmed. I have no problem collecting the data from the serial port, and I can do the visual basic programming okay. I have absolutely no clue how to read the data into the database, continuosly read new values into the databse, and then access the stored data to update the text fields on the form. Please help if you can, I've been working on this specific problem for a couple of weeks and I'm not making any progress. Thanks.
I need to retrieve points column from my database for the specific user that is signed on and sum all of them. How can I do it using the Gridview and also code in vb for a label? Thanks.
View 4 Replies View RelatedHere is my sql procedure:
ALTER PROCEDURE dbo.SoftWareShow /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ @SoftID uniqueidentifierAS SELECT [SoftID], [SoftName], [SoftJoinDate], [SoftSize], [SoftMode], [SoftRoof], [SoftHome], [SoftDemo], [SoftFirstClassID], [SoftSecondClassID], [SoftDesc], [SoftReadCount], [SoftDownCount],ltrim(rtrim([SoftUrlOne])) SoftUrlOne, ltrim(rtrim([SoftUrlTwo])) SoftUrlTwo, ltrim(rtrim([SoftUrlThree])) SoftUrlThree, ltrim(rtrim([SoftUrlFour])) SoftUrlFour FROM [SoftWare] WHERE ([SoftID] = @SoftID) RETURNwhere I retrieve data using sqldatasource, an error appear. how can do ?
Hello,
Before I ask a question, I am visually impaired and cannot read printed words only on a screen. I am 51 years old and have been coding professionally since I was 23 (yes that long). I have four apps on the market and run a small consultancy company in the UK and my SQL knowledge is scant. I have read two books on the subject and thought I had an idea on how SQL works.
I used to belong to another forum but they gave me a hard time so please go easy on me.
I developed an ADO app ages ago and remembered some of it ...
I have four tables (the following is a simplified version of the real thing)
MainTable (Contact data like name address etc. 23 fields)
Towns (Two fields TownUIN and TownName)
Counties (Two fields CountyUIN and CountyName)
Countries (Two fields CountryUIN and CountryName)
My database is normalised to 3NF and contains no duplicate or redundant data.
My problem ...
Sample data
Main:
MainUIN MainName MainTown
1000 Fred Bloggs 1
1001 Fred Smith 2
Towns:
TownUIN TownName
1 Bradford
2 Leeds
SELECT MainName,MainTown FROM Main WHERE MainUIN=1000 returns
'Fred Bloggs' 1 (the TownUIN)
I want ...
'Fred Bloggs' 'Bradford'
It was suggested I use
SELECT MainName,MainTown FROM Main,Towns WHERE MainUIN=1000 AND TownUIN=MainTown
This returned 'Fred Bloggs' 'Bradford' but was slow.
My question is what am I doing wrong?
I am using SQL Server 2005 Express with VB.Net 2005 on Vista Business and XP.
I am sorry my SQL knowledge is weak please dont get angry just tell me the basic thing that I do not know.
Hi.I have a IIS server with php3 installed. I have SQL server databaseand data stored in unicode format (nvarchar fields). In header of myphp I have the meta: <meta HTTP-EQUIV="content-type"CONTENT="text/html; charset=UTF-8">.I have the following problem:- I trie to do a query using ODBC (version 3.525.1022.0) and SQLServer odbc driver (version 200.85.1022.00). The query doesn'tretrieve information in utf format and accents and extra charactersaren't showed correctly.- I trie to di the query usin native OLE DB. I use mssql funtions andthe problem is the same.If I install php4 and I use "newCOM("ADODB.Connection",NULL,CP_UTF8);", then it works correctly.Anybody knows if its posible to retrieve data from sql-server in utf-8format using php3?I see in other postings that odbc driver only accept utf-8 in version3.7 or higher? Is it true? If is true, where I can download odbcdriver 3.7?Thank's in advance.Miki.
View 1 Replies View Relatedi need to retrieve data from a particular field of the gridview according to the selected row to stored it into session .....what i had done so far as following: Protected Sub GridView1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) DetailsView1.PageIndex = GridView1.SelectedIndex Session.Add("receiverName", GridView1.??????) End Sub????? is the part i am not sure what to code.... i tried different method by seems to have problem of convertion.
View 1 Replies View RelatedOkay, I used the SQLDataSource control to get my data from the database
table. What or how do I retrieve individual data from the
sqldatasource? I want to do some string comparison and manipulation
before I display it to the browser. How can this be accomplish?
Help is appreciated.
Hi,
I have a website which is designed to search for employee information. I have the search system working which does exactly what I want to, but as an added feature I want there to be a button which, when someone clicks on it, it takes whatever the previous search was and generates a set of data in XML format which is based on the results. For example:
User searches for all entries with Forename = John; Results are listed in a gridview as per expected.
User then presses button with XML on it, and page pops up with just the XML output on it, i.e. whatever results are on the gridview but in a nested XML format
<records> <record> <Forename>John</Forename> <Surname>Smith</Surname> <Email>j.smith@blah.com</Email> <Ext>1234</Ext> <DeptList>History</DeptList> </record></records>
I have created a stored procedure which will take the parameters from the search boxes and return the above information, but I don't know if this is the best way. Here it is for those interested:
CREATE PROCEDURE ps_record_SELECT_NameSurnameEmailExtDeptasXML
@Forename varchar(50),
@Surname varchar(50),
@Email varchar(50),
@Ext varchar(4),
@DeptList varchar(50)
AS
SELECT Forename, Surname, Email, Ext, DeptList
FROM dbo.record
WHERE Forename LIKE COALESCE(@Forename,Forename) AND
Surname LIKE COALESCE(@Surname,Surname) AND
Email LIKE COALESCE(@Email,Email) AND
Ext LIKE COALESCE(@Ext,Ext) AND
DeptList LIKE COALESCE(@DeptList,DeptList)
FOR XML AUTO, ELEMENTS
If someone could be kind enough to help me out with this, I'd be really grateful.
Many thanks,
Tom
Last night I face performace problems in web site. I got like 100 000 users and site fails because of sql-connections.
Currently I'm making a new connection for every query, and my code looks like this:Public Shared Function executeQueryReturnDataset(ByVal strsql As String) As DataSet
Dim sqlConnection As New SqlConnection(Connstr)
Dim sqlCommand As New SqlCommand(strsql, sqlConnection)
Dim sqlDataSet As New DataSet
Try
sqlConnection.Open()
Dim myDataAdapter As New SqlDataAdapter
myDataAdapter.SelectCommand = sqlCommand
myDataAdapter.Fill(sqlDataSet)
Catch e As Exception
Console.Write(e.ToString())
Finally
sqlConnection.Close()
End Try
Return sqlDataSet
End Function I was wondering would it be better to save an instance from connection object to memory and use that same connection for all querys?
Background:I am using Visual Studio 2005 Standard SP1 to create an ASP.NET website that accesses an SQL 2005 database. I am using vb.net as well.I am passing an ID in a query string from one page to the next, where I retrieve it using an SQLDataSource. The data will only be one row; it is returning customer information.Problem:I need to be able to get specific fields from the SQLDataSource and populate some textboxes. Honestly, I'm not really sure where to begin. For the sake of argument, let's say that I am working with this:'My TextboxDim LastName As Textbox'My SQLDataSource (filtered by query string using the customer's ID to only get 1 customer's information at a time)SQLDataQuestion:So, how would I go about retrieving the lastname field from SQLData and inserting it into the textbox LastName?Thanks, J'Tok
View 2 Replies View RelatedDears,
I'm using FormView to insert and retrieve data from SQL Server Database 2000. I'm using stored procedure to insert and display data by using C#.
Every time I insert the data, I can't retrive it. To retrieve all the inserted data, I have to close my website, and then reopen it again.
I close the connection every time after using the stored procedures, but nothing happened.
What do you think the problem is ??
Let us suppose that there are 900 rows in One table, and that table contains neither primary key, nor Identity column.
How can I retrieve all the roows from 201 to 250?(like the middle limits)
In oracle there is a property called RowID, but is there any such item in SQL server?
I wonder how to get top 1 row per account number. Let's say I have
--snip--
IDENTITY_ID | ACCT_NUMBER
0001 | 1111-2222
1001 | 1111-2222
2002 | 2222-0000
3003 | 2222-0000
4004 | 1111-2222
--snip--
I used the SQL-Query here
Code:
SELECT * FROM BACKUP_LOG ORDER BY IDENTITY_ID DESC
[code]
Since they are in descending order by IDENTITY_ID, so I only want to get 1 distinct account number somehow.. Like this...
[code]
4004 | 1111-2222
3003 | 2222-0000
I couldn't figure it out.
Thanks...