Recover Database File
Aug 24, 2006
hi all,
i have SQL 2000 server with SP3, yesterday my database was suddenly goes to suspect mode. then i found log in sql server log. and it shows following text:
I/O error (bad page ID) detected during read at offset 0x00000000030000 in file 'C:Program FilesMicrosoft SQL ServerMSSQLDataMFS_Data.MDF'..
kindly, do needful for recover data from this file...
Tejas Kishanwala
View 4 Replies
ADVERTISEMENT
Oct 21, 2015
I am working on SQL Server 2008 R2 and unfortunately I have lost my .mdf file after detaching it from my database, but the .ldf is still in my system. Is there a way to recover my database from .ldf file?
View 3 Replies
View Related
Jul 10, 2015
Recently i got task from Senior DBA, as : Recover a database without LOG file Currently Data File is available.
Log file is also available, but shows size as 0 KB. Means Log file is corrupted.
Currently existing DB is shown as Offline Mode in SSMS.
So i got below link:
[URL]
When i tried 1st/2nd solution from above link, i got below message:The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
To try that 3rd solution, I had to DELETE/Remove existing DB from SSMS, so i can create New DB with same name.
When i tried to delete Log file from Command Prompt, using below command, Windows replied that File is corrupted, so it cannot be deleted.
DEL /F /Q /A C:Program FilesMicrosoft SQL ServerMSSQL11.SQLEXPRESS2012MSSQLDATAMyDB.ldf
Meanwhile my Senior DBA brought DB in Recovery Pending mode.
So if i want to go for 3rd solution,then i need to DELETE file, But Windows is not allowing me.
[URL]
View 3 Replies
View Related
Feb 24, 2002
Our SQL database log file got physically deleted. Now the database is in suspect mode. Is it possible to recover / restore the database just with the data file.
View 3 Replies
View Related
Nov 28, 2014
I run MSDE on a Windows XP Server and my database was marked as "suspect" by Enterprise Manager and its icon become gray. I detach that database and try to re-attach it but there is an error as the following:
Error 3624:
Location : page.cpp:2801
Expression: rowLength >= offset + deleteLenght
SPID : 56
Precess ID:1612
After that, I uninstall the MSDE and re-install new MSDE SP4 and try to re-attach the database file again and there is still an error. Is there anyway i can recover the data from that database?
View 4 Replies
View Related
Jun 3, 2015
SQL server. By-mistake I updated values of a column in a database hosted online, is there any way undo the transaction. I didn't created any backup of the database. I read that still it can be recoverd through the .ldf (log file) but unable to access it. Is there anyway to get access of the Log file or is there any way to recover the data.
View 3 Replies
View Related
Jul 20, 2005
I have SQL server 2000 which recently crashed. I try to recover it andfound out that the Master database is corrupt. I never backup myserver using inline sql backup nor any third party backup program thataware to SQL server. But I have full system backup of volume c on tape(using NTBackup), which includes old version of Master database. Myquestions are:1. How can I recover this file into SQL server?2. If so, it is not risky to recover Master database from two weeksago?Thanks in advance!
View 1 Replies
View Related
Nov 19, 2007
Hi,
The standby file (.tuf file) got deleted accidentally on the secondary. How can I recover the database without the standby file?
View 3 Replies
View Related
Jul 20, 2005
Recently, one of our database's mdf and ldf was corrupted. We were able tobring back the database with the capability of importing and querying thedata. However, the data is not the full list. Some of the data are stillmissing because the tables we want still has sone 'chain mis linkage' errorwhen we did a DBCC checkdb/checktable. DBCC couldn't fix those errorseither. We're pretty sure that there are some data still burry under thecorruption. Then we thought of the life LDF file. This file should haverecorded every transaction up to the point of failure. So we trying torecover that file, but there are 2 problems. First is we don't have back upof that file and 2nd, that file is also corrupted. I couldn't backup thecorrupted ldf file at its current state. It's giving me some unrelated errormessage like disk space is out. All I know now is the only hope to recoverthose missing data are in this LDF file. We tried to use this software fromLimingent Log Explorer to recover it. So far no such luck with that. SoI'm asking anyone who has similar experience or problem. Please let me know.I need to know anyway to recover this LDF file, either by using sql server'snative tools or 3rd party tools. Any input is helpfull. thanks in advance.Wei
View 1 Replies
View Related
Jun 15, 2006
Hello!
Hopefully someone can help me with the following (potentially huge) problem:
We've got a simple database application running on microsoft sql desktop engine. This database contains two tables. Up until now all worked fine, but probably due to a programma that crashed part of the database seems to be corrupted or broken while today only one table contains/returns data and the other table does not return any values!
When I open the .ldf and .mdf files in notepad I see that there is data belonging to both the tables. But how do I recover it??
The max. size of the database has not been reached by far (it's only 9Mbs), the sql queries are correct.
This .ldf file is a log file (?) I can't find detailed info about the principles of these .ldf and .mdf files on the internet, is it possible to trace back what has happened en recover the database that way?
Thanks in advance.
Greetings,
Rens Voogd
View 11 Replies
View Related
Aug 3, 2002
Hi All,
By mistake i delete database from sql server. Due to which the the mdf and ldf file of the datbase are removed from my system. Then i used file recover utility and retrived my mdf and ldf files.But now i am not able to attach those files into databse. These mdf and ldf files has been corrupted. Now how can i recover my data from those mdf and ldf files.Please answer me if you have any solution on this problem.
Regards,
Satish Rotella
View 2 Replies
View Related
Jul 6, 2006
Dear All,SOS Please Help.I have a MS-SQL DB with 4 .ndf files. One (first) .ndf file is missing.somehow got deleted??. Is there any way can rebuild my DB.The .MDF and .LDF files are in tact.Please help asap.Dhumbak*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Dec 22, 2006
Hi,
My database corrupted because when I was running an update query, there is a power failure. After the computer booted, I cannot open the database anymore, it just not responding. Then I stop the sql server service, and tried to rename the .mdf and .ldf. After that it worked normally, but I need the data from the corrupted mdf file, I tried to attach the database but it just hanged. I even tried to attach without the .ldf file but it didn't work either, so I concluded that the problem is with the mdf file.
Is there any way to recover my data ??
Thanks in advance
Regards,
Edwin
View 8 Replies
View Related
Dec 23, 2003
Hi ,
I got problem in production server at client place(No backup copy & not replicated,it's a SQL SERVER 2000 Enterprise server),by mistake client updated the data without using where condition then updated lakhs of rows (in SQL server autocommited),Now I need to recover this data from LOG file(.ldf).I tried with LOG EXPLORER(Third party tool) Trail version recovered from default database(Northwind,Pubs).But client not willing purchase this S/W for simple cause,How can we recover the data from LOG file.
1.Can we write the Program in C# to read the SQL Server Log and show the past transactions?
2.Is There any Stored procedures exist in SQL Server to read the day transactions in log file and take the backup?
3. How to read Transactions Log file in SQL Server 2000?
It's very Urgent,I am not expert in SQL Server 2000.
Could U Please Help me with possible solutions.
Regards,
Harikrishna.
View 1 Replies
View Related
Nov 10, 2006
catcat writes "Hi All,
Our MSSQL 2000 server crashed yesterday and one database cannot be restored. the latest backup we have is june. We can only recover the MDF file from the harddisk and according to our admin, it cannot be restored anymore because no proper shutdown was made.
Will appreciate your help here."
View 2 Replies
View Related
Feb 27, 2000
How do I begin? I had previously installed the SQL Server 7.0 with NT Authentication and everything was fine until I Rename domain Name and Computer name. I decided to uninstall SQL Server, and then reinstall it.
From this action unable to see my database in enterprise manager. I Rename old domain and computer name again. and reinstall with Upgrade Version. but still same effect. Can anyone help? What do I need to do to get my database to work again? Any input on this will be appreciated. Thanks in advance.
View 1 Replies
View Related
Aug 25, 2004
I had MS SQL installed on my comp.I had to reformat my hard drive due to some problems.There was a db in the sql server which i needed.So i saved the .mdf & .sdf files.Then i installed sql server in the formatted hard drive & pasted the .mdf & .ldf files in the Data forlder in MSSQL folder.But the problem is that even after doing this the enterprise manager doesnt show that database.Can anyone help me with this?Is there any way to recover the database?
Thanks a lot
P.S.- I also have whole of the earlier MSSQL folder present in the earlier program files backed up.Would that help in anyway.
View 3 Replies
View Related
Nov 23, 2004
Hi
I've had a powerfailure, that resulted in I had to scratch my DB server, I've managed to get all the .mdf and .ldf files from the server. On the new server I get a "Error 823: I/O error (torn page)" when I'm trying to attach the .mdf file to the New server.
Both the new and the old server is a win2003 with SQL 2000 SP3
Is there anybody who knows how I can recover the DB?
/Rune
View 1 Replies
View Related
Oct 6, 2005
Hello,
Is it possible to restore a SQL 2000 database with data from a transaction log?
I am not sure what happened to my database, all the data in the tables is gone. I generated a db script to create a duplicate database. I saved the .sql file on my local machine, separate from the db server, renamed the database name in the .sql file to a new database. Tested script in query analyzer for syntax, all was fine. Running it at this point would have created a new database with a different name, right?
Now my original database is empty. Can someone please provide me with information on getting my data back. Is there a way of using the transaction log to recover the data.
Thanks
View 2 Replies
View Related
May 9, 2011
is there any way to recover a database? I accidently drop my database .I don't have any backup.
View 5 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Feb 28, 2008
I have a mirred database and have snapshot created from the mirroed database. I can do data selecting from the snapshot. But when the pricipal server is down , I can re-active the mirroed database.( I did succesfully upto this). Then I need to restore the database from snapshot and which failing with following error message.
Code Snippet
Msg 5123, Level 16, State 1, Line 3
CREATE FILE encountered operating system error 3(error not found) while attempting to open or create the physical file 'E:sql_datadevitst_mirrorlog st_mirror_log.ldf'.
Msg 5024, Level 16, State 2, Line 3
No entry found for the primary log file in sysfiles1. Could not rebuild the log.
Msg 5028, Level 16, State 2, Line 3
The system could not activate enough of the database to rebuild the log.
Msg 3013, Level 16, State 1, Line 3
RESTORE DATABASE is terminating abnormally.
View 7 Replies
View Related
Jul 23, 2007
Hi all,
Is it possible to recover or find the password of database or resetting is the only option? I have a database that has a two users in the Users tab. How to find out the password for these?
Thanks,
View 4 Replies
View Related
Feb 1, 2008
Hi,
By mistake i've damaged my .mdf file and i have no backup on this database . However i have the transaction log intact and an older version of the database .
Is it possible to recover the database using the transaction log? How can it be done?
Thanks to anyone who can help me.
View 3 Replies
View Related
Jul 14, 2003
Hi all:
In order to test database restore, I create a backup driver and puporse delete one table, then I try to restore my databse use backup, but the delete table donot show up.
Thank you
View 5 Replies
View Related
Jan 24, 2004
I can recover all type of ms sql server database losing.please contact me at cn9526@163.net
View 2 Replies
View Related
Oct 5, 2007
I have accidentally deleted a Database from SQL server 2005 instance. Is there any chance for me to recover the Database. If yes do let me know the method.
Thanks in advance
Mrinmoy
View 4 Replies
View Related
Jul 23, 2005
Howdy all -I am *not* a DBA, so please bear with me. A client's Windows 2000server went belly up yesterday afternoon after getting updates fromWindows Update. Wouldn't come up at all any more. I broke the mirrorfor the OS, rebuilt the Windows 2000 installation, and installed MS-SQL2000 and SP3 so that now the server is configured identically to whatit was before the crash.Now I have the databases in D:Program FilesMicrosoft SQLServerMSSQLData. D: is a mirror of the (now broken) oldinstallation. How can I get the databases into the active installationof MS-SQL on the C: drive?I was thinking of creating databases with the same name, shutting downSQL and copying the files from D: to C: but that sounds too easy.Any pointers greatly appreciated. Please remember that I am not anexperienced DBA, so use short words and speak slowly... :-)
View 1 Replies
View Related
Feb 12, 2008
hi
Can any body provide me any idea that how to recover database data if i have deleted that database
Bye......
View 2 Replies
View Related
Mar 22, 2006
One of my SQL Express databases was deleted by mistake through MS SQL Server Management Studio Express. It is not in the Recycle Bin and I have tried to use a tool such a Active@ Undelete to recover the file but it cannot find the deleted file.
I have a backup file *.bak in the ....MSSQLBackup folder I made using MS SQL Server Management Studio Express. When I try to use the restore database feature in SSMSE I get various errors.
Any Suggestions on how to recover the deleted file or
Any suggestions or documentation on using the restore feature in SSMSE?
Any help at all?
Thanks
George
View 6 Replies
View Related
Jun 20, 2007
Hi all. A few days ago i installed mcafee total protection 2007 and that disabled my internet connection totally!! I couldn't fix it so i had to uninstall it. After uninstalling mcafee total protection 2007 still i couldn't join Internet!!
So i got mad and went and made repair installation of windows xp pro. After repair installation i couldn't activate it since Internet connection was still not working!! So i went and installed another copy of xp pro on different folder and named it WINDOWS (old one was WINDOWS2).Thanks god now i could join Internet but all my shortcuts and menu items are not visible.
Unfortunately I can't even start sql server 2000 either!! could any one tell me what should i do in order to get access to all database tables and data that i had in sql server and make a back up. I didn't install any new sql server yet. I be happy if an expert tell me what should i do. The installation folder of old windows(WINDOWS2) is still available along with sql server installation folder.Thank and looking forward for reply.
View 2 Replies
View Related
Oct 18, 2006
I accidentally deleted some useful data in my database. I have both .LDF and .MDF files for this database.
Is there a way to recover this database to a point of time?
Thx.
View 5 Replies
View Related