Recovering Database From Transactional Log File(.ldf File)
Sep 23, 2007
Hi
I am in a trouble without doing any mistake. I restarted while in parallely my sql server was restarting i.e I opened a management studio.
When it booted up next time. I see that my database is gone. Though it is showed up in the server but has no node below it.
I then checked the mdf files and ldf files and found mdf file to be of 0 KB and ldf file is of 1.73 GB. My database was in full recovery mode but i did not take any database backup.
Here ais the entry from my SQL server log:
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0000000000000000 in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAHello.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I wonder if now there is a case to recover my database..Can I restore/recover the database from .ldf file as it was in full recovery model?Any help i shighly appreciated.
View 5 Replies
ADVERTISEMENT
May 9, 2007
A friend of mine called and said that his database was suspect and he detached it and was unable to attach it. The SQL Server Version is 2000 with the latest service packs installed. When I checked it the database (MDF) size was 1MB and the LDF size was 3.8 GB. I was not able to attach the two together and I was not able to attach the database using sp_attach_single_file_db. I did find an old backup of his database and attached that so he can work off of it but it is 1 yr old and he needs recent data. Since the MDF seemed to be blank we cant do much with that, but there seems to be data in the LDF. Is it possible to extract any data from the LDF file?
Sunny
View 1 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Apr 30, 2007
Hi,
I am working on SQL Server Business Intelligence Development Studio - 2005. While working on the same, the studio got closed automatically and I was not able to save my existing file.
When I try to open the last saved file, it is thowing the following error:
Deserialization failed: The element 'QueryParameter' in namespace 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition' has incomplete content. List of possible elements expected: 'http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition:Value ##other:*'. Line 277, position 12.
EDIT CODE
Now I am not able to open the file. Please let me know how can I recover the lost file.
Regards
Syed
View 1 Replies
View Related
Aug 17, 2006
I saw the other thread that is related, but let me give you our circumstances. A drive failed and that drive had the SQL installation and the *.ldf files on it. The MDF files were unscathed.
The drive has been rebuilt and I have reinstalled SQL 2000 SP3A on there (that is what was there before). I have tried attaching the MDF through the GUI and letting it create the log for me. This failed.
I tried sp_attach_single_file_db, but this failed since the db was never dettached.
I tried creating the db again, dettaching it, copying the old (good) MDF file over the newly created one and then attaching (using multiple attach approaches). It knows that the log file and mdf are not matched and won't let me do the attach.
I also found DBCC REBUILD_LOG, but the article in SQL Mag supposes that your instance is still in working order and that there is an entry for the db in sysdatabases. Such is not true in my case.
Can you help? We are trying to get old backup tapes shipped to the site, looking up our Gold Partner contact info, etc., but in the meantime, I am trying to get the data restored even if we lose some transactions.
Thanks for any help!
View 4 Replies
View Related
Nov 25, 1998
Hi,
Bit of a panic here.. Someone accidentally deleted a database device (and
consequentially the associated databases) from MS Sequel 6.5. I don't have a
backup dump of the databases.
Does anyone know how I restore the device? I have the DAT file and I can
see the data in it if I use a text editor.
Thanks
Jonathan
View 1 Replies
View Related
Oct 9, 2007
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies
View Related
Mar 24, 2006
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database:
Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
With all the comments in these forums - this must be a bug.
I have been working on this problem for over 2 weeks - HELP!
View 1 Replies
View Related
Sep 12, 2015
I have a database which gets refreshed on the daily by restoring 1 transactional file log, at the moment it is done manually but I'm trying to create an automation job which would get the transactional life file and restoring it.
View 5 Replies
View Related
Sep 23, 2015
I'm trying find a way of crating an sql server job which would restore only transactional log file just once a day. The trouble I'm having is trying to get only the latest transactional log file it it possible to achieve through e.g powershell etc as I can't find a way through sql query?
View 9 Replies
View Related
Sep 13, 2007
Hi i am getting a weekly transaction file which has two columns trans code and trans date to indicate whether the record is changed, added or modified . and the monthly master file contains blank in these two fields.
How do i update the row coming from the transaction file in the tables which contain the rows from the master file .
to better explain the example is
Master File
ID Name AGE Salary Transcode TransDate
2 dev 27 2777
Transaction File indicating change
ID Name AGE Salary Transcode TransDate
2 dev 27 24444 C 08072007
the ouput should be
2 dev 27 24444 C 08072007
replacing the existing row in the table(updating the whole row)
i have 50 columns in my table and based on the two fields i should replace the rows exisiting in table and if ID doesnot match exist just add them as a new row.
what transformation should i use .... to replace all the columns which have matching ID in table to the current record from trans file and if there doesnt exist matching id just add them as new row.
Thanks...
View 1 Replies
View Related
May 29, 2007
Hi all,
I have a database name MyDatabase (SQL Server Express Dabase File). Is there anyway that I could convert it to SQL Server Compact Edition File?
By the way does anyone here got any problem with programming in SQL Server Compact Edition? It troubles me.
Thanks,
bombie
View 6 Replies
View Related
Jul 20, 2007
I am developing a C# mobile 5.0SDK app that utilizes SQL2005 Compact Edition device files on Vista using as far as I know the latest SPs and versions.
Last night, I could open tables from the Server Explorer .sdf file, see the contents, edit the schema, etc. Now today, I assume all of a sudden,I am able to open schema but cannot open the table to see the contents. I get:
Microsoft SQL Server 2005 Compact Edition captioned error dialog box that says "Access to the database file is not allowed. [ File name = ],[,,]
Using Sql Server 2005 Management Studio Express, I can open the table, do queries etc. I have tried rebooting, deleting, opening old projects, deleting dataset, disconnecting mobile device, but I still get the same error. I have tried stopping the SQL Server(SQLEXPRESS) service on the server but get:
Cannot open MSSLQ$SQLEXPRESS service on computer 'p5w64'. Access is denied.
I have no idea what to do next to start moving forward again, other than try the XP environment which I will do next.
Has anyone experienced this problem?
Thank you.
View 9 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 6 Replies
View Related
Sep 22, 2015
What is the recommended size and file growth for a database and log file? We will be storing approx 10000 records a day.Currently we have the following:
CREATE DATABASE Dummy
ONÂ
PRIMARY
( NAME = Dummy_data,
  FILENAME = 'D:....DATADummy.mdf',
  SIZE = 250MB,
  FILEGROWTH = 25MB )
LOG ON
( NAME = Dummy_log,
  FILENAME = 'D:....DATADummy_log.ldf',
  SIZE = 50MB,
  FILEGROWTH = 5MB ) ;
GO
View 3 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 3 Replies
View Related
May 15, 2006
good morning,
I want to load data that i receive everydays from my customers in .xls file format (excel) or cvs file format, to the database that i have created on this purpose. but when trying to do that whith SSIS; i got an error message .... that i can't import redudant data in my database column.
Best regards.
View 1 Replies
View Related
Apr 18, 2004
Hi there :)
I'm in the final stage of my asp.net project and one of the last things I need to do is add the following file information to my SQL server 2000 database when a file is uploaded:
First of all I have a resource table to which I need to add:
- filename
- file_path
- file_size
(the resource_id has a auto increment value)
so that should hopefully be straight forward when the file is uploaded. The next step is to reference the new resource_id in my module_resource table. My module resource table consists of:
- resource_id (foreign key)
- module_id (foreign key)
So, adding the module_id is easy enough as I can just get the value using Request.QueryString["module_id"]. The bit that I am unsure about is how to insert the new resource_id from the resource table into the module_resource table on file upload. How is this done? Using one table would solve the issue but I want one resource to be available to all modules - many to many relationship.
Any ideas?
Many thanks :)
View 1 Replies
View Related
Jun 8, 2006
I used SQl Server replication to create a new database (as I did using Visual Studio 2003) but when I go the Pocket PC and click on the file I get a native error 25011 with a description
The file is not a valid database file
An Internal error has occurred[,,,Databasename,,]
Interface defining error: IID_IDBInitialize
When I check on my Pocket PC what programs are available I've got Query Analyser 3.0 and SQLCE Query. It appears that the .sdf file is associated with SQLCE Query because when I use that to try and connect to the same database I get the same error.
If I use Query Analyser 3.0 (after having copied the .sdf file) to the temp directory I'm able to open the database.
There is a similar post to this one but it doesn't help me.
Is it that SQLCE Query is wrongly associated with the .sdf file?
If so how do I change that?
Or is there some other problem preventing me clicking on the .sdf db to open it?
I have recreated my project in Visual Studio 2005 and rebuilt all my components in 2005. There are some external ones that I use that I can't do this for.
The following is the build output that I get when I deploy to a clean PDA with a hard reset performed
------ Build started: Project: Printing, Configuration: Release Any CPU ------
No way to resolve conflict between "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" and "System.Data.SqlServerCe, Version=1.0.5000.0, Culture=neutral,
PublicKeyToken=969db8053d3322ac, Retargetable=Yes". Choosing "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" arbitrarily.
Printing -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll
------ Build started: Project: MobileSeller, Configuration: Release Any CPU ------
Consider app.config remapping of assembly "System.Data, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes"
from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Data.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System.Windows.Forms, Culture=neutral, PublicKeyToken=969db8053d3322ac,
Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Windows.Forms.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from
Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.dll] to solve conflict and get rid of warning.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Microsoft.Common.targets : warning MSB3247: Found conflicts between different
versions of the same dependent assembly.
MobileSeller -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(546,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(634,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(706,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(846,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
Done building project "MobileSeller.vbproj".
------ Skipped Deploy: Project: BO, Configuration: Release Any CPU ------
Project not selected to build for this solution configuration
------ Skipped Deploy: Project: Printing, Configuration: Release Any CPU ------
Project not selected to build for this solution configuration
------ Deploy started: Project: MobileSeller, Configuration: Release Any CPU ------
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Data.Adoce.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Interop.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePocketHTMLprint_NetCF.dll'
Deploying 'C:DevMILLAR CODE CABINETVS2003CFReferencesUSICF.dll'
Deploying 'C:DevVS2005CFReferences
eleaseSignature.dll'
Deploying 'C:DevVS2005CFReferences
eleaseRealUpDown.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll'
Deploying 'C:DevVS2005CFReferences
eleasePhoneAPI.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMVnetApplication.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMobileHList.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMobileGrid.dll'
Deploying 'C:DevVS2005CFReferences
eleaseImageButtons.dll'
Deploying 'C:DevVS2005CFReferences
eleaseCreditCardValidator.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseBO.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe'
========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 1 succeeded, 0 failed, 2 skipped ==========
View 5 Replies
View Related
May 14, 2008
hello,
I'm not really sure my question belongs to here...
I have a database in Access (from microsoft office, of course), and I want to transfer convert it to SQL Server.
Does anyone know how I can do it? It must be very simple, but I haven't found it yet....
Thanks a lot!
- Miri
View 7 Replies
View Related
Sep 16, 2007
RESOLVED RESOLVED RESOLVED
DOH! When I rebuilt the OS, I changed the data partition ID's, and didn't remember to change them in the connetion strings
Not great, but better than continuing to bang head against wall.
Would like to say to MS appreciators that the VS2005 reinstall actually went quite well, considering.
===========================================================================
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
The Connection strings are all of the form
connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=(specific file string).MDF;Integrated Security=True;User Instance=True"
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
View 1 Replies
View Related
Feb 20, 2007
Hi,
I want to retrive the values from the database 'northwind' and then i want to store the backup files in "D:/Sample/north_database.bak" format(local machine).
I retrive the database values in .txt,XML format. Now i want to take in .bak format.
give the Suitable solution for this.
Subashini.G
View 4 Replies
View Related
May 7, 2007
Hi,
I have the database file and log file for all the databases in SQL server in the same drive. I want to seperate both the log and data file into different drives. What is the best way to do it? Is there any script that could be run.
Please help.
Thanks !
View 2 Replies
View Related
Aug 31, 2007
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 1 Replies
View Related
Sep 2, 2015
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. Â My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.Â
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
View 2 Replies
View Related
May 10, 2007
I have a customer they are running raid 5 on a windows 2000 server one of the drives went bad. The customer replaced the drive and raid rebuilt the drive, every thing seamed to be fine but there is one database file that cannot be attached to SQL. The file is 15G so I know there is information the error states that the file is not a Primary file. Any clue on how to fix this?
mdf file size 5,738,944 KB
ldf file size 10,176 KB
View 4 Replies
View Related
Apr 6, 2000
Any ideas on how long it should take SQL Server 6.5 running on a 8 Gig RAID 0 array to "recover" a 4 GIG database. I rebooted the machine this morning (seldom ever have any problems with it) and it seems to be taking an awfully long time (15 min so far). I'll let you know what happens in any case.
View 2 Replies
View Related
Mar 15, 1999
I need to recover a database, but unfortunatelly i don´t have any backup... Well, it was not my fault. Anyway, i only have the physical .DAT files of the data and log devices of the database.
Will it work if I create two devices with the same name as the old devices, create a database with the same name as the old database within these devices and then run a full script of my old database, then change the 'phy_name' on the sysdevices to point to where my old dats were, or replacing the current ones with the old ones? If not, will anything else work?
Thanks in advance.
View 2 Replies
View Related
May 3, 2004
My server crashed i had full back up my .BAK file for every database and i reinstalled a fresh verion of sql server 2000 enterprise and when i comme in enterprise manger to restor the master its telling me i need to be in single user mode what do i do.
View 2 Replies
View Related
Jul 23, 2005
The data file is a simple Unicode file with lines of text. BCPapparently doesn't guarantee this ordering, and neither does theimport tool. I want to be able to load the data either sequentially oradd line numbering to large Unicode file (1 million lines). I don'twant to deal with another programming language if possible and Iwonder if there's a trick in SQL Server to get this accomplished.Thanks for any help.Mark Leary----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups---= East/West-Coast Server Farms - Total Privacy via Encryption =---
View 15 Replies
View Related
Nov 19, 2007
Hi,
The standby file (.tuf file) got deleted accidentally on the secondary. How can I recover the database without the standby file?
View 3 Replies
View Related
May 31, 2000
1) How do I reinstall a fresh copy of the MSDB database (since my current
one is corrupt). Is there any script available?
2) What is the purpose of the MSDB database? Backups and jobs/ Wizards?
Thanks for your help.
Ziggy
View 2 Replies
View Related
Mar 9, 2000
I have a 3GB DB that I was running an update script on. The sript failed and ran out of transaction log space. I expanded it and stopped and restarted SQL. The user DB is now marked as recovering. How long should I wait for it to recover? I don't want to have to restore again and start all over with my script. Please help.
(By the way this is a restored DB)
Thanks.
LC
View 1 Replies
View Related
