Recovering Specific Tables Within A Database.
Mar 27, 2008
We currently have a company program in foxpro which inputs all of our information into its database. We are trying to shift from this to new updated software and a SQL database. There is a program we created which converts all the data from our old database into our new SQL database in preparation for our final move to the newer software. However, some of the tables in SQL were not taken directly from our old database but rather added in directly after our initial use of SQL, so when we ran our conversion software, a couple of specific tables were wiped because there was no equivilant within our old database. We already altered our conversion program to not touch those tables again, but is there any way to do a roll back or to find a backup of specific tables?
View 4 Replies
ADVERTISEMENT
Oct 8, 2007
Hi friends,I need to select columns for specific data from all tables in DataBasePls give me reply asap Regards,M.Raj
View 4 Replies
View Related
Sep 21, 2007
Hi!
Is it possible to generate a script, that extracts every bit of data it can, from tables which suffers from latch errors;
DBCC CHECKDB ->
Msg 7985, Level 16, State 2, Line 1
System table pre-checks: Object ID 4. Could not read and latch page (1:403) with latch type SH. Check statement terminated due to unrepairable error.
So bad news on that one. There are no backup available that I know off, so all bets are off on that part of the recovery process.
The "good news" part of the problem, is that it is possible to extract some data out of the table, before SQL server 2005 returns the error. So what I want to do, is get every bit out I can, doing it somehow automatically, so I don't have to run bcp on 180 tables :).
Presumeably, this is quite possible, but how?
NB. If I do a complete basic SELECT * FROM tbl1, it returns data, then errors out, but what about the data after the last row SELECT returns? Is it possible, that there might be data in the table that are recoverable after the 'broken row(s)'?
View 20 Replies
View Related
Apr 6, 2000
Any ideas on how long it should take SQL Server 6.5 running on a 8 Gig RAID 0 array to "recover" a 4 GIG database. I rebooted the machine this morning (seldom ever have any problems with it) and it seems to be taking an awfully long time (15 min so far). I'll let you know what happens in any case.
View 2 Replies
View Related
Mar 15, 1999
I need to recover a database, but unfortunatelly i don´t have any backup... Well, it was not my fault. Anyway, i only have the physical .DAT files of the data and log devices of the database.
Will it work if I create two devices with the same name as the old devices, create a database with the same name as the old database within these devices and then run a full script of my old database, then change the 'phy_name' on the sysdevices to point to where my old dats were, or replacing the current ones with the old ones? If not, will anything else work?
Thanks in advance.
View 2 Replies
View Related
May 3, 2004
My server crashed i had full back up my .BAK file for every database and i reinstalled a fresh verion of sql server 2000 enterprise and when i comme in enterprise manger to restor the master its telling me i need to be in single user mode what do i do.
View 2 Replies
View Related
May 31, 2000
1) How do I reinstall a fresh copy of the MSDB database (since my current
one is corrupt). Is there any script available?
2) What is the purpose of the MSDB database? Backups and jobs/ Wizards?
Thanks for your help.
Ziggy
View 2 Replies
View Related
Mar 9, 2000
I have a 3GB DB that I was running an update script on. The sript failed and ran out of transaction log space. I expanded it and stopped and restarted SQL. The user DB is now marked as recovering. How long should I wait for it to recover? I don't want to have to restore again and start all over with my script. Please help.
(By the way this is a restored DB)
Thanks.
LC
View 1 Replies
View Related
Sep 21, 2006
I am in a big trouble ,
accidently i have issued a DROP DATABASE XXX command in the sql client, thinking its a local server....... The whole 4 months of database database is now dropped.
Please help me , how can i recover the database ....
thanks in advance
View 1 Replies
View Related
Aug 2, 2007
I accidentally deleted at SQL 2005 database. Is there any way I can get it back? No, there is no backup.
View 6 Replies
View Related
Nov 23, 1999
What should I have done? Is there anything that can be done other than restoring from backup?
How does one know if the database is really recovering or is EM just joken? I can wait 2 hours
before starting the restore
I was BCPing 12 million rows into a staging table. II used the '-b' option every 20K which I thought
would do a commit and clear the log in batches. After the process EM appeared to show the transaction log
as empty. Upon inspecting the Bcp output file I discovered the message that the BCP did not complete
because syslogs was full. I could not do a truncate transaction log or a dump database. I tried to
do a truncate transaction with no_log and it appeared to just hang. I stopped the SQL Server thinking
I could dump the transaction log, but could not start the Sql Server again. I then stopped the NT Server
because 'if all else fails'. The SQL Server started but the user database if marked as recovering.
View 5 Replies
View Related
Feb 28, 2008
I have a mirred database and have snapshot created from the mirroed database. I can do data selecting from the snapshot. But when the pricipal server is down , I can re-active the mirroed database.( I did succesfully upto this). Then I need to restore the database from snapshot and which failing with following error message.
Code Snippet
Msg 5123, Level 16, State 1, Line 3
CREATE FILE encountered operating system error 3(error not found) while attempting to open or create the physical file 'E:sql_datadevitst_mirrorlog st_mirror_log.ldf'.
Msg 5024, Level 16, State 2, Line 3
No entry found for the primary log file in sysfiles1. Could not rebuild the log.
Msg 5028, Level 16, State 2, Line 3
The system could not activate enough of the database to rebuild the log.
Msg 3013, Level 16, State 1, Line 3
RESTORE DATABASE is terminating abnormally.
View 3 Replies
View Related
Jan 5, 2001
while recovering it prompts a message 'the system administrator must have exclusive use of database to run the restore operation'.
now,how to do it?
how to make database to use exclusively when it is connected to an web based aplication.
thanks.
View 1 Replies
View Related
May 9, 2007
A friend of mine called and said that his database was suspect and he detached it and was unable to attach it. The SQL Server Version is 2000 with the latest service packs installed. When I checked it the database (MDF) size was 1MB and the LDF size was 3.8 GB. I was not able to attach the two together and I was not able to attach the database using sp_attach_single_file_db. I did find an old backup of his database and attached that so he can work off of it but it is 1 yr old and he needs recent data. Since the MDF seemed to be blank we cant do much with that, but there seems to be data in the LDF. Is it possible to extract any data from the LDF file?
Sunny
View 1 Replies
View Related
Oct 16, 2007
Hello,
I was coping database from my sql server 2005 to the same server but with different name. 4 steps completed successfully but the last step failed because the computer on which sql server is running turned off unexpectedly. When the server was running again, the source database was detached. I tried to attached it but sql server is reporting error 5 (system cannot access the specified file) I cannot access the file from windows explorer too. I discovered that the copy of the mdf file exists with the name of the target database but when I try to attach this new mdf file sql server reports that the file is not primary database file. Both files are the same size. What can I do? Thanks
View 8 Replies
View Related
Jul 30, 2001
Hi all,
I have a query similar to this:
select "bcp databasename.."+name+"
from sysobjects where type = 'U'
order by name
What I need to know is that, I need to unselect some of the tables that starts with name cj_. I don't want the tables that starts with a name cj_.
Can someone help me on this.
Thank you
View 3 Replies
View Related
Jan 5, 2012
Is there a command I can use to tell me all the tables in my schema that have a column name "Id"?
View 5 Replies
View Related
Sep 29, 2014
In SQL 2008, there is a way to backup a database, but specify the tables backed up, and, during the restore on the destination server, restore only those tables in the database?
View 2 Replies
View Related
Oct 23, 2007
I have 1000's of tables. Some are of the form dbo.VT_2006-10-12. I'd like to drop all tables with the "VT" in the table name. How is the best done?
View 6 Replies
View Related
Oct 14, 2015
How to set ddl triggers for specific tables, instead of on entire database.
View 2 Replies
View Related
Jul 28, 2006
I want to write SQL that will search the tables in a database for a specific column, like this. For instance, I have a column "Unique_ID" that is in many of our tables (hundreds) but not in others and want to find out the tables it is in. It is always the first column.
I tried to find a system stored procdure to do this but couldn't and tried to create a script using the sysobjects and syscolumns tables in the Master db, but came to a roadblock because they don't seem to be related at all.
I would surely appreciate if someone else has already done this!
Thanks!
View 6 Replies
View Related
Dec 7, 2000
database : MS SQL server ver 6.50.201
problem: server startup / server time out
details
SQL server shows usage of 100 % CPU utilization, if started automatically / manually. and does not proceed / hangs up(server time out), but win nt operates extremely slow.
The background of the situation in brief is as stated below.
The errorlog was found to have the messages
warning : OPEN OBJECTS parameter may be too low.
Attempt was made to free up descriptors in localdes()
Run sp_configure to increase parameter value.
Error : 644, severity : 21, state; state 1
the non clustered leaf row entry for page 2 row 1 was not found in index page 40 indexid 2 database 'tempdb'
Error : 2620 severity 21 state 3
the offset of the row number at offset 32 does not match the entry in the offset table of the follwoing page : page pointer = 0x1395800, page no= 40, status = 0x2, objectid = 1, indexid = 2
Action taken
I used the sp_option to increase the open objects from default 500 to 1000, and the LE threshold maximum value to 400 from the default 200.
after which I used reconfigure go and restarted the computer to take the effect. The following did work fine and server was working ok. But then from yesterday I am having the problem that the MS SQL sever is utilizing the cpu to 98 - 99 % and I am not able to connect to the server.
I tried to start the server with the minimal configuration by specifying the -f option in the service manager start up options, it showed the following message
00/12/07 10:40:49.73 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
00/12/07 10:40:50.02 ods Unable to connect. The maximum number of '5' configured user connections are already connected. System Administrator can configure to a higher value with sp_configure.
afterwhich I tried with the option of starting the sql server with the option -c -f
which in the event detail of the win nt shows
"mesg 18109: Recovery dbid 6 ckpt(55813,8) oldest tras= (55813,0)"
The open procedure for service "MSSQLServer" in DLL "SQLCTR60.DLL" has taken longer than the established wait time to complete. The wait time in milliseconds is shown in the data.
DB-LIBRARY error - SQL Server connection timed out.
and in the errorlog present in MSSQLLOG directory
00/12/07 15:06:43.24 spid1 Recovering Database 'master'
00/12/07 15:06:43.31 spid1 Recovery dbid 1 ckpt (7944,28) oldest tran=(7944,0)
00/12/07 15:06:43.41 spid1 1 transactions rolled forward
00/12/07 15:06:43.49 spid1 Activating disk 'AM'
00/12/07 15:06:43.49 kernel initializing virtual device 1, D:MSSQLDATAAM.DAT
00/12/07 15:06:43.50 spid1 Activating disk 'AMLOG'
00/12/07 15:06:43.50 kernel initializing virtual device 2, D:MSSQLDATAAMLOG.DAT
The dbid is / was 6 for both the instances, the database which is having this dbid is database name "AM" and is having above 1300 tables (approx)
what could be the problem and solution for it?
kindly help me out of this situation.
If any more information is needed please contact me on devendrakulkarni@yahoo.com / devendra@me.iitb.ernet.in
Regards
Devendra
View 1 Replies
View Related
May 26, 2007
I want to copy FirstName and LastName cells from table1 to table2. Which FirstName and LastName cells depend on the username, i.e. which person has logged in.
Q1) How can this be done? (I have chosen to SELECT from Table1 and output to variables (C# code); then INSERT these variables into Table2. [Finding it very difficult]).
Any suggestions/comments would be appreciated. Thank you in advance.
View 1 Replies
View Related
Mar 11, 2002
I am kinda new with SQL and am trying to get a count of on the number of updates and or inserts to any given or group of tables and cannot get the syntax correct...can anyone help with this?
Thank you in advance.
Colin P.
View 1 Replies
View Related
Mar 28, 2014
I have a DB with some tables and, on certain tables, i've a column named "ID_COMPUTER".
I need to find all the rows where id_computer=<specific_value> from all the tables of my database, when column "ID_COMPUTER" exists.
Pseudo-code would be: select * from db.* where id_computer=<specific_value>
how to write this ?
View 2 Replies
View Related
Jul 3, 2015
I have 3 tables as per following:
orddet
OrderProductQtyOrd
1 Item1 20
2 Item1 10
3 Item2 10
4 Item1 5
4 Item2 5
ordhead
OrderDate
110/06/2015
205/07/2015
307/06/2015
415/08/2015
product
ProductdescMinQty
Item1This is 110
Item2This is 220
I want to pull only the 1 line for minqty for an item as follows
OrderProductQtyOrddate minqty
1 Item1 20 10/06/2015 10
2 Item1 10 05/07/2015
3 Item2 10 07/06/2015 20
4 Item1 5 15/08/2015
4 Item2 5 15/08/2015
View 2 Replies
View Related
Jul 15, 2015
I have two queries from two different tables ex ABC and BCD. For table ABC, according to my query, I got 11 records ; for table BCD I only got 9 records.
Bottom line: I would like to see only 11 records from Table ABC including certain data from table BCD after I joined this two tables.
However, no matter what I did I always got 99 records when I joined.
View 3 Replies
View Related
Apr 30, 2008
Hi all,
does anyone know of a way in which you can backup and restore objects that belong to a specific schema?
So in this example, I€™d want to only back up and be able to restore the tables that belong to schema 1, leaving Schema2 stuff alone.
--DB
----Schema1.Table1
----Schema1.Table2
----Schema2.Table1
----Schema2.Table2
Thanks in advance,
Andy.
EDIT: I forgot to add that I want to backup the tables and the data contained within.
View 4 Replies
View Related
Sep 23, 2007
Hi
I am in a trouble without doing any mistake. I restarted while in parallely my sql server was restarting i.e I opened a management studio.
When it booted up next time. I see that my database is gone. Though it is showed up in the server but has no node below it.
I then checked the mdf files and ldf files and found mdf file to be of 0 KB and ldf file is of 1.73 GB. My database was in full recovery mode but i did not take any database backup.
Here ais the entry from my SQL server log:
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0000000000000000 in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAHello.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I wonder if now there is a case to recover my database..Can I restore/recover the database from .ldf file as it was in full recovery model?Any help i shighly appreciated.
View 5 Replies
View Related
Feb 6, 2015
I have a table of "applicants" with unique applicant id and another table "reviews" with reviews which has unique id and Emplid and contains general program name like Math and then may contain 3 addition rows for specific program like Calculus, algebra, geometry etc.
There may or may not be a record for each applicant id in table reviews or there can be 1 or more than one record in reviews based on level of review( General or Specific).
All the general reviews has “Math” as Program_code but if there are more reviews, they can have Program_code like “Cal” , “Abr”, “Geo”
I want to join the tables so I can get all the records from both the tables where Program_code in reviews table is “Math” only.
That is I want to join the table and get all the records from reviews table where the program_code is “Math” only
How can I do that?
View 6 Replies
View Related
Oct 6, 2015
I have documentation in the form of extended properties for tables which are subscribers in a replication scheme. The documentation describes the tables in reference to their replication scheme. I don't want to apply them to the source and have them published.I can't apply the extended properties receiving the error, 'don't have permission' yet I am DB creator on all systems. The theory is that I can't modify the subscription. Which makes sense.Can I turn off the replication, apply the extended properties, then turn on replication without causing harm?
View 0 Replies
View Related
May 23, 2015
I need to select specific values from all rows where the value of a specific column is "Active"
This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client
But I want to add: WHERE StatusType = (Active) and how to do this.
View 4 Replies
View Related
Jun 30, 2015
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
View 2 Replies
View Related
