I have done installing sql server cluster 2014 and i want to add Analysis Service to current instance and i am getting error telling me this is clustered instance and you cant complete the installation .
View 2 RepliesHi
I am trying to find disaster recovery scenarios for Analysis Services which seems to be lacking. Is there anything documented.
Thanks
Hey,
I have a 3 node cluster running 6 instances of SQL Server, I want to install Analysis Services along side of one of the SQL 2005 instances. Thus one of the cluster instances would host SQL Server DB, Analysis Services and SQL Agent. Is this possible or does Analysis Services need it's own Cluster Instance.
Thanks!
Hi,
I have some questions about SQL Servers 2000 and 2005 compatibility.
In my configuration I have to use both servers.
The cubes are stocked in 2005 server.
May I transfer from 2005 to 2000 Analysis Services the cubes?
If yes, what is the procedure? The result of migration is the same in the two different versions?
If not, how can I solve this problem?
Thanks in advance.
I need to test the restore of a backup on the same sql instance w/o affecting the db from which the backup was taken. Is it possible to create a new db and restore the backup onto it (on the same instance)? The test db will be deleted afterwards. Will this have any detrimental effects on the instance or on the original db? Any help, warnings, suggestions are greatly appreciated.
Thanks,
John
What is the T-sql command to get the current instance name please?
Thanks
I've been having SQL 2000 startup issues for a while now and upon checking the logs, noticed a bunch of messages about analysis of the database at % completion and recovery complete. Then I see messages about it shutting down and starting back up again. Is this what is causing the problem? What is going on?
View 2 Replies View RelatedFollowed this article to move my model and msdb databes but I think I messed up. http://msdn.microsoft.com/en-us/library/ms345408.aspx
The instance will not start because it says one of the files does not match it's primary file (not sure if it's model or msdb)
I can bring the instance up in single user mode (NET START mssqlserver /f /t3608) but when I try to do a query to re-do my alter statements, it says i can't attach because only one seesion is allowed. in 2000 i used to be able to start query analyzer without starting enterprise manager..
When i try and start with a minimal config (sqlservr -c -m) it won't start. I get an error saying that one of my files does not match it's primary file (either model or msbd don't know which) any ideas????????
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions. When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)." I've tested connecting to the database from Excel on a desktop and connect fine.I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the connector configuration. It's also a local admin account. There is no gateway installed on the server.
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
How to right choose key column in"Mining Structure" for Microsoft Analysis Services?
I have table:
"Incoming goods"
Create table Income (
ID int not null identity(1, 1)
[Date] datetime not null,
GoodID int not null,
PriceDeliver decimal(18, 2) not null,
PriceSalse decimal(18, 2) not null,
CONSTRAINT PK_ Income PRIMARY KEY CLUSTERED (ID),
CONSTRAINT FK_IncomeGood foreign key (GoodID) references dbo.Goods ( ID )
)
I'm trying to build a relationship(regression) between “Price Sale” from Good and “Price Deliver”.But I do not know what column better choose as “key column”: ID or GoodID ?
It is possible to create Analysis Services project (*.dwproj) in Visual Studio 2012 Data Tools?
View 5 Replies View RelatedI have a system running a sql 2000 instance w/ multiple databases located in a SAN. I would like to cluster my SQL 2000 environment on the same system. Can I do this without reinstalling another database instance? Can I put my current default instance and put it to my virtual server instance? Help is really appreciated. Any tips and links can be helpful to me.
View 3 Replies View RelatedWe have an AAG environment. In order for the failover to be transparent we have to ensure that the login that is added in the Primary node is also added to the secondary node. Currently, we are adding the logins to the secondary node manually. Is there a way to automate this process so that a Login added to the Primary node is automatically updated on the Secondary Node.
View 4 Replies View RelatedI am in the process of rolling out a pair of SQL 2014 servers. I have setup an Availability Group, Listener and databases. It's my understanding that I will be giving the listener name to our developers so that they can do their work. In testing, I noticed that If I am using Studio Manager and connected to the the AG using the listener name, when I setup a user in security the user is only added to the active primary node. Is there a way to add a user to both servers in one shot instead of having to install on both servers?
View 5 Replies View RelatedWe have a server A and a server B setup with SQL2014 High Availability - working fine.
I need to add an additional listener to our new DR site (SQLNODECOLO).
What is the best way to do this without impacting production?
Can I just go to server A and add the new listener server here (SQLNODECOLO):
Let's have a table to show what I mean ...
As you can see I have added only one contract (for the sake of simplicity). At any given date I want to calculate the running total for a contract (all contracts), but the aggregation must take the contract state into consideration.
You can see my expected result for queries 1 - 3. That means, with the actual state ('B') I want to aggregate all values regardless of their state in the past.
For query 2 the state is 'A' ... I hope you can follow.
Now my aim is to aggregate all contract states for any given date with the right value. The past states of each contract are not relevant. And of course future ones (with respect to the query date) shall also be irrelevant.
Maybe the solution is a combination of 'LastNonEmpty' and SUM/PERIODSTODATE ...
Hi there,
I have been using reporting service to generate my report and sending email with attachment report via subscription everyday. It is work well and no error.
My attachment file name is as same as reportname project. But customers asked me to add current date into an attachment filename which will help them to identify the report. I try to check in rsreportserver.config to change it but have no idea.
My reportname project is daily_file.rdl and my attachment filename in email is daily_file.csv. I'd like to change my attachment filename as day_month_year_file.csv.
Is there anyone know how to change an attachment filename to be not the same as reportname in reporting service 2005
Regards,
Is there any way or option to get the all columns of dataset added to table when we add a table in data region. It will take lot of time to add one by one and also there are chances to add one column ore than once.
View 7 Replies View RelatedTrying to add a second replica to my SQL 2012 AG. for some reason i cant click the next button.
View 3 Replies View RelatedSQL Server 2012: Out of all the databases in the instance we have a requirement in which we need to maintain a high availability for the databases around (128). Our team believed log shipping will apt for this requirement but not sure on it's limitations, how many databases are allowed or supports this log shipping from a single instance.
View 7 Replies View RelatedI'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard. When I enter the name of the target node (secondary replica) server and press connect, I get the following:
A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
The SQL Browser service is up and running on the target. I am using an Azure VM for my SQL instance. This cluster spans geographies from our on-premise site to Azure via a VPN. This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03.
[URL]
Full error:
Connect to Server
Cannot connect to ssasnodeaz03
Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
One of our production databases was setup mirroring, log shipping and replication on it, the log file was setup unrestricted growth. This morning one index rebuilding process generated lots of logs, and the log file disk ran out of space, the database was in recovery mode. so we had to disable log shipping, pause mirroring and replication, expand log file disk, restarted SQL instance to fix the issue. Now we want to setup the log file to maximum size 80G, the whole log file disk is 120G.
So if the log file reached 80G next time, we can change the max size to 90G or 100G and it's easier to fix the space issue. My question is, if the database log file reached max size,
1. is the database still available?
2. Will the active session causing the issue be rollback to release space back?
There is a lot of documention concerning data(base) backups, but I could not find information about how to backup a complete SQL Server instance (data + configuration) or the SQL server configuration (= everything, that is not user payload). you always re-configure your system after restoring, especially because you will forget some settings?I found following things necessary to backup configuration:
server-wide:
security: login, roles, ...
server objectsserver properties (e.g. collation, connection or memory settings; see SSMS "Server - Properties")
per database
database settings (SSMS - database - properties)scheme
1. Is there anything missing?In case of a severe system crash I would like to be able to recover the system using a full system image of the virtual machine. However I just create these images after significant changes (e.g. Windows service pack).The SQL server should be backuped independently from these system images.
2. Even if I used SQL Server maintenance plan, choose "backup all databases" and additionally backup resources DB manually I think, that some configuration is still missing, right? Where are the security configuration and server properties saved? In my system database there are some tables, but there is very little content inside, so that the data from the views INFORMATION_SCHEMA* and sys.* obviously is not saved there.SQL Server system objects, such as sys.objects, are physically persisted in theResource database, but they logically appear in the sys schema of every database. URL....What does that mean: Are all DB/table schemes, logins, ... saved in resource DB?
3. Does a usual SQL Server full database backup also contain all settings concerning this database (database properties, logins, ...)?
4. Is there at least a way to backup ONLY the configuration (server-wide and database) without data? The only tool I could find is DACPAC, that exports a database's scheme and some other configuration, but e.g. the database properties are not included: By default, the database created during the deployment will have the default settings from the CREATE DATABASE statement. The exception is that the database collation and compatibility level are set to the values from the source database. URL..
I need to create a set so that when a user selects a month in filter (say 201506) then it should give me a list of months from 201406 to 201506. Any appropriate MDX query.
View 7 Replies View RelatedThe situation is like this,in my Requirements table,my fields are requirement_name,req_id and allow_multiple.allow_multiple.The fiels allow_multiple has a value of 0 and 1.In the Staff table,the fields are staff_id,staff_name,req_id.When we add requirement name to the staff table ot should check for the allow_multiple field, if it is 0 i can only add 1 instance of that requirement to the staff and if it is 1 i can add many instances of that requirement to the staff.How can i do that?
thank you..
Funnyfrog
At the following MDX code , I want to get the aggregate of measure only for members that are also in the specified last time (like in examp 01/06/2015) . I tried existing and exists, but without any lack.
WITH MEMBER A AS
(b)+(C)
MEMBER [Measures].[Aggregate] AS
Aggregate(DAYTIME].[Month].&[2013-01-01T00:00:00]:[DAYTIME].[Month].&[2015-06-01T00:00:00],
([Measures].[D])
[Code] ....
We have an active/active two-node QA cluster with four instances of sql. I need to add a fifth. In the past I always moved existing instances to the other node while installing a new instance.
Other than impacts to users from install reboots, is that a hard requirement?
QA is reluctant to have me put the four existing instances on one node for most of a day, fearing big performance slowdowns. Each node has 250GB of memory and each instance is allowed 50GB. Netapp disk backend.
How to find last login date/time for user DML acitivity on databases on Instance?
Is there any way we can find our the last login date/time for databases?
Note: 1. We can find if the SQL Trace is running and store.This is not good solution
2. Audit logins off/on is also not good solution.
3. Using DMV's also not good option, if reboot sql server instance then historical values can not see.
SQL Server Data Tools within VS 2010 Shell.2012 SASS in Tabular Mode.I've created a Measure and KPI in my fact table. I've created a perspective named "Summary" When selecting the fields and measures for display in the perspective, the measure is available, but not the KPI (target, status, etc.). When Analyzing in Excel with the Summary perspective, the KPI is not available in the field list. When analyzing in Excel with the (default) perspective, the KPI is available.As far as I can tell, there is no way to select a KPI within the perspective window.
View 8 Replies View RelatedI've installed SSAS 2012 as a failover cluster instance on a 2-node Windows 2012 R2 cluster. All was fine in that regard but I now need to change the instance name so am going about the process of uninstalling and re-installing. I've successfully removed the second node from the configuration using the "Remove cluster node" wizard from the Setup options, but when it comes to removing it from the final node I'm getting the error "the cluster group **** could not be moved from node x to node 'null'". At this point the uninstall fails and the cluster resource remains in cluster administrator. It's obviously done some work/damage because the service won't start now, but it's left in limbo land where I can't do anything with it.
Is there a manual way of removing the instance to overcome this issue (file deletions, registry entry deletions etc.)?
One of my actual production environments is a Failover two-node cluster, SQL Server 2005 SP3 on Windows Server 2003 R2. Recently, the node 2 was failed, so I formatted a new machine to add the new node, but it failed with the following error: “Adding nodes to the Virtual Server definition using a newer version of Setup is not allowed.”I have searching across the web for a solution but I can’t find it.
The Summary file “Summary.txt” are:
Microsoft SQL Server 2005 9.00.1399.06
OS Version : Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 2 (Build 3790)
Time
: Thu Jun 04 13:04:38 2015
[code]....
One point of my attention, it’s that the Product Version that appears on this summary file corresponding a 9.00.1399.06 that is to say, a RTM version, not SP3 (9.00.4035).Based on this, I went to the path where the files of installation are (ARPWrapper.exe), "C:Program FilesMicrosoft SQL Server90Setup Bootstrap"and I 've found that these files contain a different version of what I have currently installed. For example, in properties of ARPWrapper.exe the version of this is 2005.90.1399.0 The same goes for the rest of the files in that folder:
Microsoft.SqlServer.AnalysisServices.UpgradeAdvisor.dll
Microsoft.SqlServer.BestPracticesAnalyzer.UpgradeAdvisor.dll
Microsoft.SqlServer.DTS.UpgradeAdvisor.dll
setup.exe
Is it possible that the solution is to replace these files with the corresponding version, in this case the version 2005.90.4035.0(SP3) and continue with the installation?
Is it possible to add, remove or modify a named set in an already deployed cube? I don't want to modify anything except the sets. If it is possible at all, are there any example of doing it?Second is technical. I have redefined set "myRowsSet" to "myRowsSet2". What I did is I removed the calculated members and placed their code directly inside the set. Why isn't it working?
with
-- road bikes in france
member [Product].[Product Line].myMemberRoad as aggregate(
existing(
intersect(
[Product].[Product Line].[Product Line].members
,[Product].[Product Line].&[R] -- road
[code]...