Recovery :: Connecting To Availability Group Listeners In Different Subnet
Sep 23, 2015
I have a web server that is on our DMZ subnet and I have a sql 2014 database server with Always on Availability Groups that is on our internal domain subnet.The failover cluster is on the internal domain subnet as well. I am trying to connect a web application, that is working off the .net 2.0 framework, to an SQL Server 2014 database using the Always on Availability Group Listener.
The connection strings works perfect with the named instance of the sql server but when I try to use the Availability Group listener it timed out. I did some research online and was led to believe that increasing the connection time would resolve it. I did that and got a different error pertaining to a successful connection but an error occurred during the login process (Provider: TCP Provider, error: 0 - The specified network name is no longer available.)
I just want to connect to an Availability Group Listener on the domain subnet. I have rules in the firewall to allow all services for the IP of the Listener. I switch back to the named instance of the same server and it works flawlessly. I have also connected to the Listener while running the application on the same subnet as the sql server without an issue. I have tried the IP instead of the Listeners name and still received the same error on the DMZ subnet. I'm running on Windows Server 2012 R2 on all servers.
The Web Server is using IIS 8.5..All Physical Machines except the replicas and webserver are virtual machines.All Static IPs involved.As mentioned all SQL Servers are 2014.
View 25 Replies
ADVERTISEMENT
Nov 20, 2015
need to migrate a cluster with an AG dtabases to new data center cluster with AG.
I was wondering if is possible to do mirroring on top of the AG configuration? or what other options could be to migrate a cluster that has 3 nodes and setup the ag databases to a new datacenter.
View 17 Replies
View Related
Nov 2, 2015
i am preparing for always on with multiple instant.is there any consideration with multiple instant ? with each instant shall i create new availability group?
View 3 Replies
View Related
Sep 12, 2014
We're having an issue with an AG where the the log backup does not appear to truncate the log. symptoms..Run full backupRun transaction log backup DBCC Loginfo shows all VLFs with a status of 2sys.databases.log_reuse_wait_desc says LOG_BACKUPOPENTRANS indicates no open trans.All backups are being run on the primary.
View 10 Replies
View Related
Nov 9, 2015
SQL 2012 EnterprisePrimary server and 2 x secondary serversWindows 2012 R2
I have removed one of the database from availability group by mistake. Luckily I am still operational with primary server. database on secondary servers are on restoring mode.
I have done full backup of database from primary (prod) server and restored on secondary servers with no recovery when I add database into availability group I get an error message log missing what is the best method to achieve and add database again into availability group.
Note I cannot restore database on primary server as it is on production
View 9 Replies
View Related
Aug 13, 2015
How do I add my second (secondary) node in my AlwaysOn Availability Group, after adding my head node, and the secondary node is a virtual machine. See based on the attached file if it is the correct way?
View 2 Replies
View Related
Nov 9, 2015
I am in the process of rolling out a pair of SQL 2014 servers. I have setup an Availability Group, Listener and databases. It's my understanding that I will be giving the listener name to our developers so that they can do their work. In testing, I noticed that If I am using Studio Manager and connected to the the AG using the listener name, when I setup a user in security the user is only added to the active primary node. Is there a way to add a user to both servers in one shot instead of having to install on both servers?
View 5 Replies
View Related
May 27, 2015
In our(my company) current design we want to switch from failover clustering to Always On as high availibility solution.
I am currently testing the availiblity Group Listener function and have two questions regarding this.
First of all, is it possible to connect to a a listener by just using its "name" instead of "name,port", it is for our users very inconvenient to start using ports. If this is possible, where can I find information on how to configure this?
Second, is it possible to use the Availiblity Group Listener as loadbalancer or in combination with a loadbalancer to split the users over two or more nodes?*note we don't use azure.
View 4 Replies
View Related
Sep 17, 2015
I need to move files for a lot of databases that are all part of an AG. I've used the method at the bottom of this link with success on a small test DB.
View 2 Replies
View Related
Jul 16, 2015
I have 3 synchronous AlwaysON replicas: A, B and C. A is primary, B and C are secondary and both are set to Automatic recovery. How can I understand, which of them (B or C) will become primary when A goes offline? Well, Actually my final DB system should support following configuration:
1) Normally - A is primary B and C are sync secondary.
2) if A fails, B automatically becomes primary, C remains Sync secondary.
3) if A goes online, it becomes primary again
4) C becomes primary only after A and B fail (and there still should be cluster quorum!)
As I understood, first of all i should configure quorum the following way: A-0, B-1, C-1, folder-witness-1.
The problem, again, is: I cannot understand how to configure which replica becomes primary when AG fails over.
View 3 Replies
View Related
Sep 22, 2015
I have an active passive cluster on my primary Data center in NY and have a DR Active / passive SQL Cluster in TX. These are two separate clusters in the same domain using the same SQL server credentials.Both clusters host an active / passive SQL instance. Lets call it SQLNY(Primary) and SQLTX (DR). I want to enable always On Availability group within the two SQL Instances SQLNY and SQLTX. The listener will be SQLAG which will be used by the Application to connect to the SQL instance. Is there a practical way to implement this? This will not only give me instant fail over within the NY (Primary) but also give me the flexibility to fail over to TX. I am using SQL 2014 Enterprise Edition on both clusters.
View 6 Replies
View Related
Jul 11, 2014
I have a situation where I have two servers in SQL Server 2012 R2 AlwaysOn Availability Group. One is primary and the other one being secondary. I am only running SharePoint Database on it.I have run out of space on the primary server and about to run out of space at the secondary server. I have tried shrinking database transaction log files, but it returns an error that it cannot be shrunk as the database is in the AlwaysOn Availability Group.
Questions:
1. Several forums suggest that databases need to taken out of AlwaysOn Availability Group in order for the shrinking to work properply?
2. Would it have any impact on the database if it is taken out of availability group and then added back?
View 6 Replies
View Related
Apr 29, 2015
Is AlwaysOn Availability Group support SCCM , SCOM and DPM ??what is the best Solution for this products to be highly available ??
View 3 Replies
View Related
Jul 30, 2015
I have a SQL 2014 SP1 set of servers with two asynchronous copies of an availability group. One of the asynchronous sites is down and SQL can no longer replicate the changes. I need to understand how long SQL Server can continue this way before the secondary replica will no longer be able to catch up. I assume this is really tied to the transaction log on the primary replica but would like it clarified.
View 4 Replies
View Related
Sep 9, 2015
I'm just starting to work with AlwaysOn Availability and WSFC.
I have in my environment (in Azure) a DC, WSFC and to SQL instances, so I have 3 nodes in my Failover Cluster:
WSFC
SQL1
SQL2
If I simulate failure by shutting down one of the SQL boxes my Availability group seamlessly fails over to the other SQL instance - which is great.
However, I'm starting to look into the workings of the Quorum, my envt has the default settings and when I shutdown both of my SQL servers I expected the Cluster itself to go offline as 2 out of the 3 votes will be negative, but the Cluster is still up - Screenshot below when SQL1 and SQL2 are shutdown:
Going through the Wizard (but not changing anything) it shows following config:
View 6 Replies
View Related
Oct 28, 2015
I am setting up a new pair of SQL 2014 enterprise servers in HA using Availability Groups. One of the servers is located here in our local datacenter (10.0.1.x) and the other SQL server is in our remote datacenter(172.16.1.x). I was able to setup the Windows Failover Custer without much issue. I setup the AG but when I try to setup the listener. I get the following error. I have setup an IP for both networks on the listener. I have confirmed that there is not any DNS records created for AG listener name. But I still get this error.
View 6 Replies
View Related
Feb 13, 2014
I have four instances and each instance have its own Availability Group with its own listener.
Would like to know if you can have one listener for multiple Availability groups?
View 2 Replies
View Related
Jul 21, 2015
Environment: SQL Server 2014 on Windows Server 2012 R2.
We have our availability group configured and working. However, when we try to connect to the AG listener from a remote server, we have to use the fully qualified domain name (FQDN) to connect. We'd like to be able to connect just using the host name. Interestingly, ping actually resolves the IP correctly for either.
View 3 Replies
View Related
May 27, 2015
I have getting issues when i am creating listener for always On . Error shown as below
Can not bring the Windows server fail over cluster (WSFC) resources online. (Error Code 5942). The WSFC service may not be running or may not be accessible in its currents states, or the WSFC resources may not be in a state that could accept the request.
For information about this error code see "system error code" in windows development documentation
The attempt to create network name and IP address for the listener is failed. The WSFC service may not be running or may not be accessible in its currents states or the value provide for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate network name and IP address with network administrator. (Microsoft SQL Server error 41066) ...
View 2 Replies
View Related
Dec 16, 2014
I have a HA Listener which is visible and can be connected to, it has a read only secondary on a different subnet so when connecting to it we use the applicationintent = readonly and multisubnetfailover = true.
Trying to connect it as a linked server is giving me problems. I tried putting the extra info into the provider string but keep getting the failure to initialise error. I am trying to link SQL2012 to a 2012 HA group but will also need to connect from a sql2008 server as well
View 1 Replies
View Related
Sep 22, 2015
I have to install several AG on a cluster for a whole SharePoint production farm, it's a nice to have (1 AG for Search database, 1 AG for Profil database, 1 AG for Content database, 1 for applicatif, etc...) We have 2 Front End load balanced, 1 application server and 3 SQL HADR: 2 nodes on synchrone (sql 2014 enterprise licence) and the 3rd asynchrone (standard licence).
The SharePoint farm is configured with the SQL Alias on the primary node, then if there is a failover on node 1, I must move the sql Alias to the second node manualy, unless I'd configured this Alias to point on the AG listener of the availability group in order to use the automatic failover. But as we have several AG, should I create one listener per each AG?
And which AG listener should I have to configure on the SQL Alias then ?
View 8 Replies
View Related
Jun 24, 2014
I have 2 listeners on the same AG group and i cant change the registry setting for RegisterAllProvidersIP for 1 of them when you reboot it does change back to the default which is 1200.
View 1 Replies
View Related
May 20, 2015
I have setup two node SQL 2012 Always ON cluster with file share witness. I have configured two networks, one for heartbeat and second for public.My question is do I need a third network/ subnet for AG Listener? Which network does the SQL user databases in the AG group use to replicate between the replica servers?When I do the SQL backups, do I need to backup primary and secondary replicas or just backup the databases in the secondary replica?
View 4 Replies
View Related
Aug 17, 2015
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies
View Related
Nov 17, 2015
OS - Windows 2012 R2 Standard Edition.
DB - SQL 2012 Enterprise edition
Total 3 nodes participates for AO setup, 2 Nodes for Local HA and 1 Node for another datacenter for DR. All the 3 Nodes are same domain name and member.
1. Local First 2 Nodes are same subnet XXX.XX.44.XX
2. DR Node another subnet XXX.XX.128.XX
Does it require to add two different IP address while creating cluster name? Not using shared disk SAN storage etc.. I am using Node majority quorum witness setting for failover.
View 10 Replies
View Related
May 26, 2008
Hi,
I need to develop an application where my web server is in different subnet (XXX.XXX.35.XXX) and SQL server 2005 on other subnet(XXX.XXX.46.XXX). But i could not connect to it. When I connect to remote server on same subnet the exception is not thrown. But an arror specifying(could not connect to remote server) if i connect to different subnet.Can any one help me please?
View 7 Replies
View Related
Jul 23, 2005
Hi Folks,I'm very new to SQL Server. I have a home network. My primary connectionto the internet is using "Gateway 1" a linksys router, of which, my serveris a LAN node on that router. I have another LAN node connecting to the WANnode of the "Gateway 2" a wireless USR router to use with my laptop. Usingthe wireless laptop, I am on a different subnet than the Server. I'd liketo make a connection to the server through Visual Studio.net but I can'tseem to do it. I'm using TCP/IP with a port different than the default port(let's call it port 2110, even though it's not). I do have port forwardingon Gateway1 and I've tried everything from just the server internal IPaddress, the external IP address, IP address with port designation, URL withport designation, nothing seems to work. Any ideas?Thanks!Rick
View 1 Replies
View Related
Aug 18, 2015
We have a SQL 2014 AlwaysOn availability group running on two Windows 2012 R2 servers that are in the same subnet. We created a new server in a second subnet, installed SQL, joined the server to the Windows cluster, added a new IP resource for the new cluster, and performed the other remaining steps to add a new AG replica to the SQL instance on this new server. When we try to move the core cluster resources to the new node to test failover, we get an error. Here's the command we've been using:
Move-ClusterGroup "Cluster Group" -Node node3
and it returns the error: The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group...I've checked the ownership of the cluster groups and the cluster resources and it looks like they are set appropriately:
>Get-ClusterGroup | Get-ClusterOwnerNode
Cluster Object Owner Nodes
---------------- ---------------
Available Storage {}
Cluster Group {node1,node2,node3}
SQLAG {node1,node2,node3}
[code]....
We've double-checked that all IP resources are in the right subnets and that the dependencies for the Cluster Name resource and the Listener Name resource are set appropriately. I'm not sure what else to check since the PowerShell commands seem to indicate that node3 is an owner of the appropriate resources. What other things need to be checked or if the ownership being checked isn't the same as what PowerShell is checking?
View 3 Replies
View Related
Sep 16, 2015
Can we set up always on availability groups in server 2012 standard edition.
View 3 Replies
View Related
Jul 3, 2015
How to test always on availablity after configuring them.I have configured always on group with 1 active and 1 passive with readonly.I want to test from application.what are cases which we can have for testing.
View 5 Replies
View Related
Sep 18, 2015
We have a SQLServer 2012 Always-On Availability (AAG) Primary and Secondary Node installation/environments. On the Primary node, we have some databases that have the TRUSTWORTHY option enabled (Set to ON). But when the databases are synched/added to the AAG the databases loose the TRUSTWORTHY property and are reset to OFF on the Secondary Node.Because of this,When the instance fails over to the Secondary Node the applications that were working don’t work anymore.
View 5 Replies
View Related
Jun 22, 2015
We are trying to build HA and DR environment, combining AG and FCI. So we have 3 servers added to a cluster, 2 of them sharing the same storage and working as ACTIVE-PASSIVE cluster instance. The other server has a stand alone instance with its local storage, with the same drivers letters as the cluster instance.
Between the Active FCI and the Stand Alone, we set up an Availability Group. They are running fine, except by the listener. When the stand alone instance owns the Primary Replica, I am able to access the SQL Server instance by the listener, but when the Primary Replica is owned by the FCI, I can't reach the database by the listener (name or IP).
I've opened the same ports in both servers, it hasn't worked though.
View 14 Replies
View Related
Oct 19, 2015
I'm doing a certification process using AlwaysOn, and was using the link below, and on the lower 90 hotfix, and instead of downloading one by one, and then upgrade one by one updates, is there any way to make it more faster or practical, or unfortunately have to do this one by one, so the download as the update? This rollup contains the latest version of the Windows system files that are updated after the release of SP1. URL...
View 2 Replies
View Related
