I am need of comparing ORACLE and SQL clustering,.
1) Dynamic addition / removal of nodes with no effects on data distribution-- I think Yes
2) Integrated clustering technology for all major OS and Server Platforms
3) Automatic Workload management that enables enterprise Grids
4) Recovery Advisories
What are differences between always on and SQL Server Clustering
View 1 Replies View Relatedhi can anybody please explain what the differences are for linked servers and clustering? cause from what ive read they seem like they do the same thing to me. other than the failover implementation for clustering and its high cost. is there any other difference? same question goes for logshipping and database mirroring. logshipping ships transaction logs to other servers and then restores them there right? how is that different from what mirroring does? thanks for the help
View 2 Replies View RelatedHi guyz,
I have basic knowledge of Sql Server 2005 and now i wanna move ahead in Oracle 9i !
So, i have 2 questions here -
a)Whats the Difference between Sql Server 2005 and Oracle 9 i ?
Note: Please keep the discussion general so that student like me can understand. I have never seen Oracle but the industry requirements suggest that Oracle is way better than than SQL Server 2005. But thats what i think
b)I am Running Windows XP SP 2 and i would like to practise Oracle 9i. So, Where i can download it for free ? I know i have checked there website but they don't mention the difference between each version. Oracle does't market their products as well as Microsoft.
Please , I am Student .. so i request you to make the discussion general .
Thank you for your time.
I tested the failover clustering for SQL 2008R2.When I stop the SQL server services manully, the failover did not fail to another resource. At the Faiolover cluster manager, SQl server(MSSQLSERVER) only show the status for offline. I think it should be move to another owner intead of just show as offline.
View 3 Replies View RelatedHello ,
I'm facing a complicated problem and I don't think that the solution will be an easy one.
I have an SQL statement in Oracle which I need to translate it in Sql Server 2005.
select lpad(' ',5*(orderid)) || to_char(descr) as menui
from <table _name>
where MENU_ITEM not in ('test1','test2','test3') and item_parent not in ('test4,'test5,'test6')
start with <item_parent='item_parent' >
connect by prior <menu_item = item_parent and menu_name='ADR_m_adr_frame'; > ?(condition)
Somewhere I have read that SQL server does not support Hierarchical Sql statements. Is this true ? How am I going to do that ?
Any help will be appreciated.
Thank you
I have setup a WSFC that contains 3 nodes ( node 1,2 belongs to subnet A and node3 to subnet B), lets say node 1 is the primary host in the wsfc.
Each node has their own sql server instance, that i configure an Availability Group that will replicate between node1 and node 3), created an Availability Group Listener that will contain 2 vips for each subnet.
My question here and I am not sure if i missed something when setting up the Availability Group. If i failover an Availability group from sql server from node 1 subnet a to nde 3 subnet b, then the listener will be on the vip that belongs to subnet b and the primary instance will be the one in node 3, but this wont cause the WSFC to move the primary host from node 1 to node 3.
So at this point dont see what is the dependency between setting up the AG with WSFC. when fail over an AG doesn't cause the primary host in wsfc to fail over as well.
Why availability group relies on WSFC and how can i make it to depend so the primary host moves as well?
We are trying to build HA and DR environment, combining AG and FCI. So we have 3 servers added to a cluster, 2 of them sharing the same storage and working as ACTIVE-PASSIVE cluster instance. The other server has a stand alone instance with its local storage, with the same drivers letters as the cluster instance.
Between the Active FCI and the Stand Alone, we set up an Availability Group. They are running fine, except by the listener. When the stand alone instance owns the Primary Replica, I am able to access the SQL Server instance by the listener, but when the Primary Replica is owned by the FCI, I can't reach the database by the listener (name or IP).
I've opened the same ports in both servers, it hasn't worked though.
I have a windows 2012 cluster environment that consists of two SQL servers nodes with Quorum disk configured as witness.
Manual failover between nodes is working fine, however the sql instance virtual is not seeing the Quorum disk.
Moreover the Quorum disk has the same number as another cluster storage disk, is that considered a problem?
When I move the SQL instance from a node to anohter, should the Quorum Disk change ownership as well to that destination node ? if it is not changing ownership what would be the problem??
We have 2 env. : Testing and Production, both are running Windows 2003 Enterprise Server with SQL Server 2005. The difference is Testing is NOT running Windows cluster but Production do so, what is the best way to transfer a database from testing to production?
We have another systems that both testing and production are running on NON-cluster and we use backup/restore to transfer the database, can it apply in this case.
And I found that there are a tools called DTC, which can transfer all DB objects from one DB to another, is it a best way to transfer between non-cluster and cluster env.?
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies View Relatedis bulk logged recovery model support point in time recovery
View 9 Replies View RelatedPages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies View Relatedin the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies View RelatedWe have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
If you are doing a disaster recovery of an entire SQL 2005 cluster, can you just install SQL server and restore the system database to get the configuration?
View 4 Replies View RelatedI am curious to what major differences there are between these two versions.
Trying to decide whether or not to purchase the SQL 6.5 training kit from Microsoft or not. If the code and utilities are the same, then I could probably still learn from the 6.5 version. Any thoughts, suggestions will be greatly appreciated.
Thanks
What is the differences between SQL Server Desktop Engine and SQL Server Standard Edition???
Thanks
Lystra
Hi,
I am having the following problem AFTER converting to VS2008 from VS2005 and SQLCE 3.5 from 3.01:
SQL CE db file has a table called Court0 with various columns of type float. I populate the values by copying floats from another table/tables. I do this via ado.net using this code snippet:
foreach (DataColumn column in this.mycourtsDataSet1.Tables[tableName].Columns)
{
string columnName = column.ColumnName.ToString();
string columnValue = aRow[0][columnName].ToString();
object cValue = aRow[0][columnName];
if (columnName.Remove(1) == "T" && !string.IsNullOrEmpty(columnValue))
{
// Add the value to the Court0 table.
DataRow[] bRow = this.mycourtsDataSet1.Tables["Court0"].Select("BookingPeriod = '" + columnName + "'");
if (bRow.Length > 0)
{
double colValue = Convert.ToDouble(cValue);
//bRow[0][tableName] = Convert.ToInt32(columnValue);
========> bRow[0][tableName] = colValue; <==== colValue is '1055.01'
}
}
}
}
This works fine in VS2005/CE3.01 BUT not in VS2008/CE3.5
In CE3.5, the value entered into the cell looses it's decimal value.
For example, '1055.01' becomes '1055.0' in CE3.5 .
Can someone explain to me why the conversion stuffs up in CE3.5 and what do I do to fix it.
Thanks,
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
Hi!
I'm loading from Oracle using the OraOLEDB.Oracle.1 provider since I need unicode support and I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at myTask [DTS.Pipeline]: The "output column "myColumn" (9134)" has a precision that is not valid. The precision must be between 1 and 38.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204018 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
For most of my queries to Oracle I can cast the columns to get rid of the error (CAST x AS DECIMAL(10) etc), but this does not work for:
1) Union
I have a select like "SELECT NVL(myColumn, 0) .... FROM myTable UNION SELECT 0 AS myColumn, .... FROM DUAL"
Even if I cast the columns in both selects (SELECT CAST(NVL(myColumn, 0) AS DECIMAL(10, 0) .... UNION SELECT CAST(0 AS DECIMAL(10, 0)) AS myColumn, .... FROM DUAL) I still get the error above.
2) SQL command from variable
The select basically looks like this:
"SELECT Column1, Column2, ... FROM myTable WHERE Updated BETWEEN User::LastLoad AND User::CurrentLoad"
Again, even if I cast all columns (like in the union), I still get the same error.
Any help would be greatly appreciated. Thanks!
Is there any step by step help sites for setting up SQL 2005 linked (oracle 10) server?
I find MSDN articles but they referance winNT and 2000, I'm not getting very far and I'm not a DBA but need to get this working asap.
we recently got a scenario that we need to get the data from oracle tables which is installed on third party servers. we have sqlserver installed on ourservers. so they have created a DBLINK in oracle server to our sqlserver and published the DBLINK name.
what are the next steps that i need to follow on my sqlserver in order to access the oracle tables ?
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
Table struct (table1 and table2):
areacode
phonenumber
phonenumber2 (combined areacode + phonenumber) (actual column)
------------------------------------------------------------
select x.areacode, x.phonenumber from table1 as x
inner table2 as y
on x.AreaCode = y.AreaCode and x.phonenumber = y.phonenumber
result: 0
select x.areacode, x.phonenumber from table1 as x
inner join table2 as y
on x.phonenumber2 = y.phonenumber2
result: 100
select (x.areacode + x.phonenumber) as phone from table1 as x
inner join table2 as y
on (x.areacode + x.phonenumber) = (y.areacode + y.phonenumber)
result: 0
WHat's the difference between those queries? Why can't I get a result from the 1st and 3rd query?
We have a database that when an update is released (and this is very often) the release notes don't cover most of the actual changes. Every time groups of our custom queries and reports get broken due to database changes. Does anyone know how to compare two databases and get a report of the differences between them? I can either have the two versions on the same server or on different servers if that makes a difference.
I'm hoping for something where you input @oldversion, @newversion
and return is
@oldversion, tblname, fieldname, char(8)
@newversion, tblname, fieldname, varchar(8)
@oldversion, tblname, [Null], [Null]
@newversion, tblname, fieldname, int
@oldversion, [Null]
@newversion, tblname
also any changes in dependancies
Thanks
Brent
I have just converted some Access VBA code to a sproc. I'm finding that for some reason the rounding is different:
eg.
ROUND(17 * 97995 / 1000,2) = 1665.915 before Rounding
SQL SProc: 1665.91 Rounds down
ADP VBA: 1665.92 Rounds up
Does this make sense?
as promised:
--sp_addlinkedserver @server = '____________'
--sp_addlinkedserver @server = '____________'
--select * from sysservers
--sp_addlinkedserver
-- '____________',
-- 'Oracle',
-- 'MSDAORA',
-- 'ORC1'
--Select * from ___________.ORC1.dbo.sysobjects
/* Objects in Company1 Missing in Company2 */
Select 'Table Objects in Company1 but are not in Company2'
select Left(a.name,30), a.refdate from sysobjects a
Where a.xtype = 'U'
and a.name like 'TBL%'
and Not Exists (Select 1 From ____________.dbname.dbo.sysobjects b where a.name = b.name)
/* Objects in Company2 Missing in Company1 */
Select 'Table Objects in Company2 but are not in Company1'
select Left(a.name,30), a.refdate from ____________.dbname.dbo.sysobjects a
Where a.xtype = 'U'
and a.name like 'TBL%'
and Not Exists (Select 1 From sysobjects b where a.name = b.name)
/* Column Differences */
Select 'Column Differences between like named tables'
select Left(x.TabName,30) as TableName, Left(x.ColName,30) as ColumnName
, Left(x.DataType,15) as Company1DataType, x.length as Company1Length, x.refdate as Company1RefDate
, Left(y.DataType,15) as Company2DataType, y.length As Company2Length, y.refdate as Company2RefDate
from
( Select a.name as TabName, b.name as ColName, b.length, c.name as DataType, a.refdate
from sysobjects a, syscolumns b, systypes c
where a.id = b.id
and b.xusertype = c.xusertype
and a.xtype = 'U' and a.name like 'TBL%') As x
, ( Select a.name as TabName, b.name as ColName, b.length, c.name as DataType, a.refdate
from ____________.dbname.dbo.sysobjects a, ____________.dbname.dbo.syscolumns b, ____________.dbname.dbo.systypes c
where a.id = b.id and a.xtype = 'U'
and b.xusertype = c.xusertype
and a.name like 'TBL%') As y
Where x.TabName = y.TabName
and x.ColName = y.ColName
and (x.length <> y.length or x.DataType <> y.DataType)
/* Column Differences */
Select 'Column in Company1.com not in Company2'
Select Left(a.name,30) as TableName, Left(b.name,30) as ColumnName, b.length, c.name, a.refdate
from sysobjects a, syscolumns b, systypes c
where a.id = b.id
and b.xusertype = c.xusertype
and a.xtype = 'U'
and a.name like 'TBL%'
and Not Exists (
Select 1
from ____________.dbname.dbo.sysobjects d, ____________.dbname.dbo.syscolumns e
where d.id = e.id
and a.xtype = 'U'
and a.name like 'TBL%'
and a.name = d.name
and b.name = e.name)
Order by 1, 2
/* Column Differences */
Select 'Column in Company2 not in Company1.com'
Select Left(a.name,30) as TableName, Left(b.name,30) as ColumnName, b.length, c.name, a.refdate
from ____________.dbname.dbo.sysobjects a, ____________.dbname.dbo.syscolumns b, ____________.dbname.dbo.systypes c
where a.id = b.id
and b.xusertype = c.xusertype
and a.xtype = 'U'
and a.name like 'TBL%'
and Not Exists (
Select 1
from sysobjects d, syscolumns e
where d.id = e.id
and a.xtype = 'U'
and a.name like 'TBL%'
and a.name = d.name
and b.name = e.name)
Order by 1, 2
--Select 'Table Objects that are still in use in both Company2 and Company1'
--select Left(a.name,30), a.refdate from sysobjects a, ____________.dbname.dbo.sysobjects b
--where a.name = b.name and a.xtype = 'U'
Brett
8-)
I saw some demo-codes ,introducing sqlconnection class, sqlcommand class and etc, are involed .sqlexpress and c:abc.mdf.
so , I am quite confuse what's the deferences between .sqlexpress and c:abc.mdf
Thanks
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
Hi Everyone,
I've been searching for a solution for this for a week-ish, so I thought I would post my quesiton directly. Here is my scenario..
Source: MS SQL Server
Destination: Oracle 10g
The destination table has a partition set on a column called "DATE_HIGH". How do I populate this date high column in my package? Currently I just have a source object, and a destination object, but I'm unclear how to populate this field in the destination. I've read one blog that states "use OLE DB Command" - but that isn't enough information for me to implement - Can someone be more specific in these steps? Here is an example of what my newb-ness needs to understand
OLE DB Source (Select * from Table) ---> OLE DB Command (What query goes here?) --> OLE DB Destination.
Second part of my question: There is a second column called "ROW_NUM" and there is an Oracle Sequence provided to me... What objects do I need (Source, Destination, OLE DB Command etc...) and how do I call this sequence to populate on the fly as I'm loading data from my source?
If these are simple questions - my appologies, I am new to the product.
Best Regards,
Steve Collins
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L