Recovery :: Failover Scenario With Asynchronous Status
Nov 16, 2015
I have availability group with 3 node
2 in prod env and other one in DR
all replica configure with Asynchronous status
I would like to test fail-over first scenario prod env i would like to trying shutdown primary server and move to replica in prod.
I should move to replica prod from cluster service management or from SQL management studio
if i do it from cluster manager do you have power shell script for that
if i do it from SQL management studio i need the command
View 2 Replies
ADVERTISEMENT
Oct 29, 2015
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
View 3 Replies
View Related
Aug 17, 2015
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies
View Related
Oct 25, 2015
Currently in my environment we are using SQL server 2012.We setup Alwayson with synchronous commit.Details of existing AlwaysOn: one primary and two secondary.
Primary: On-Premise server.
Secondary1: On-Premise server.
Secondary2: Azure VM.
Requirement: We need to add Secondary3 New Azure VM on same AG with asynchronous mode or synchronous mode.
Or
We need to create one more AG on same DB and add the new replica with asynchronous.Is it possible above 2 option in this scenario? My cluster environment is Manual failover only not auto failover.
View 2 Replies
View Related
Oct 15, 2015
Could not able to connect secondary replica below is the error message I am getting when I tried to failover. Cannot connect to VLDBATEAM.
The secondary replica that you selected to become the new primary replica does not belong to the specified availability group. A possible explanation is that the replica has not been joined the availability group. (Microsoft.SqlServer.Management.HadrTasks)
View 6 Replies
View Related
Jun 24, 2015
I'd like to understand why it is not possible to automatic Failover Availability Groups using Failover Cluster Instances. I think it would be great for DR and HA. Do you understand why that limitation exists?
The link [URL] ....
SQL Server Failover Cluster Instances (FCIs) do not support automatic failover by availability groups, so any availability replica that is hosted by an FCI can only be configured for manual failover.
View 4 Replies
View Related
Jul 22, 2015
I tested the failover clustering for SQL 2008R2.When I stop the SQL server services manully, the failover did not fail to another resource. At the Faiolover cluster manager, SQl server(MSSQLSERVER) only show the status for offline. I think it should be move to another owner intead of just show as offline.
View 3 Replies
View Related
May 8, 2015
I am using SQL 2012 SE with clustering on Windows server 2008 R2. Now I want migrate it to windows server 2012 with minimal down time. So I want to evict the passive node and add a new node with windows server 2012 and install sql server 2012 SE on the new passive node and perform a failover(make the node with 2012 OS as active) and then evict the new passive node and add another node with windows 2012 and then do the same thing?
View 12 Replies
View Related
Aug 26, 2015
I'm getting the following error when I go to create a cluster in the Failover Cluster Manager in Windows Server 2008.
"The address 10.10.10.111 is not valid for its associated network"
I'm following the instruction in the book for the 70-462 exam. There was a step that had me create a DNS A record for the address sql-cluster.contoso.com. The IP address was mapped to 10.10.10.111. I'm not sure if this is the culprit but its the only time I used that IP address in the setup.
Below are 2 screenshots. The first screenshot is the error. The second screenshot is my DNS console.
View 7 Replies
View Related
Apr 22, 2015
I saw following point on Technet article about RBS.The local FILESTREAM provider is supported only when it is used on local hard disk drives or an attached Internet Small Computer System Interface (iSCSI) device. You cannot use the local RBS FILESTREAM provider on remote storage devices such as network attached storage (NAS).It looks like that we cannot use FILESTREAM on Failover Cluster because to setup Failover Cluster we need to have NAS. But then the NAS is made available locally for Failover Cluster so FILESTREAM should work right?Found another article which talks about setting up FILESTREAM on Failover Cluster. URL...
View 2 Replies
View Related
Aug 14, 2015
After manual AG fail-over from primary to secondary the application is not able to connect the listener name for atleast for 5 - 10 mins
The telnet fails during this time from app server, the listener ip is on muti-subnet.
At the same when i try to connect it from SSMS from a remote machine it works fine.
View 2 Replies
View Related
Jul 17, 2015
The main objective is to have a third party program operate on a failover cluster. The OS is Windows Server 2012 Datacenter loaded on 2 nodes. A virtual node exists along with supporting disks. This client software uses a SQL Server database. SQL Server 2012 Enterprise is installed and operating in a failover environment. However the client software is not failing over. If the connection to node A is lost, SQL Server fails over to node B. But the client application does not.
What needs to occur in order to associate the client software with the failover cluster? This software has 6 services total installed. Some are referred to as servers - looks like to communicate between remote client computers and the database. What is the process to associate the client software with the failover?
View 6 Replies
View Related
Jun 30, 2015
we have to build high availability SQL 2012 cluster for VDI and we have two options. One option is to build a server cluster with combination of failover and mirroring and other option is to build failover cluster with AlwaysOn.We are not sure which option to chose. We have contacted Microsoft support to provide us some documents and instructions for failovermirroring combination but they have send us instructions for AlwaysOn option.
What would be best way to build high availability cluster for VDI? Also, since first option is very complicated.
View 5 Replies
View Related
Jun 22, 2015
I am not able to connect listener after manual failover.
(This is test environment)
Server1,Server3 -> Both synchronous (Within Same data center)
Server 3 -> Async (At DR location) -Forced Failover
Test1:
Failover Server1 to Server2 --> Able to connect Listener
Failover Server2 to Server1--> Able to connect Listener.
Failover Server1 to Server3--> Able to connect Listener.
Failover Server3 to Server1 or 2 --> Unable to connect Listener. Unable to ping Listener.
Failover Server 1or2 to Server3--> Able to connect Listener.
I am using below sub-nets:
10.11.192.0/22 10.11.192.130
10.12.192.0/22 10.12.192.140
View 3 Replies
View Related
May 9, 2015
I want to install service pack 3 to my SQL Server 2012 Enterprise running on windows server 2008 R2 Enterprise fail over cluster, I read about the SP installation in technet, its mentioned that the passive node should be patched first and to do this the passive node should be removed from the cluster, I need to know whether I should completely remove the node from windows cluster or remove the node by using SQL Server installer and install the service pack and then add it back to the cluster, Can I do this by pausing the node in cluster and perform the service pack installation ?
View 3 Replies
View Related
Jun 15, 2006
Hi,
1) We will setup logshipping for a large database.
2) 2 systems are located at different city
3) Instead of use 'backup from primary and restore with norecovery to secondary ', we planned to use
SAN disk clone to get a second set of disks for related database files and log files.
4) We will mount the disk to the secondary server, however, how can we put the database on the new
server as 'norecovery' mode so that we can setup logshipping to this server ??
Another easy example is:
1) detach database
2) Copy database files to another disk
3) bring the disk to another city and attached to the new server
The database is recoveryed, how can we attach the database or mount the disk and make
the database as norecovery so that we can keep apply new logs??
For 2 identical database image, how can we toggle one from normal to norecovery to setup logshipping?
Is change 'status' from master database working?
Thank you very much for any words.
If this is the wrong forum, please point me to a correct one since I am new here and I can't find a
backup/restore related forum.
Jane
View 1 Replies
View Related
May 22, 2015
I'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard. When I enter the name of the target node (secondary replica) server and press connect, I get the following:
A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
The SQL Browser service is up and running on the target. I am using an Azure VM for my SQL instance. This cluster spans geographies from our on-premise site to Azure via a VPN. This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03.
[URL]
Full error:
Connect to Server
Cannot connect to ssasnodeaz03
Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
View 8 Replies
View Related
Aug 14, 2015
I have a database In Recovery.
Where do I check the completion status of the recovery?
View 9 Replies
View Related
Oct 19, 2010
Server : Windows server 2008
DB Server : SQL Server 2008 (SP1)
Here are the series of events which happened.
1.) Event ID: 1135
Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
2.) Event ID: 1049
Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network. Please ensure all IP addresses are unique.
3.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
4.) Event ID: 1049
Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network. Please ensure all IP addresses are unique.
5.) Event ID: 1069
Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
6.) Event ID: 1066
Cluster disk resource 'Cluster Disk 25' indicates corruption for volume '?Volume{88552e6f-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 25_Disk16Part1.log'. Chkdsk may also write information to the Application Event Log.
7.) Event ID : 1066
Cluster disk resource 'Cluster Disk 26' indicates corruption for volume '?Volume{88552e05-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk
output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 26_Disk4Part1.log'. Chkdsk may also write information to the Application Event Log.
8.) Event ID: 1049
(Same message as point 2)
9.) Event ID: 1069
(Same message as point 3)
10.) Event ID : 1049
(same message as point 4)
11.) Event ID :1069
(same message as point 5)
12.) Event ID :1205
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
13.) Event ID: 1069
Cluster resource 'Cluster Disk 17' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
14.) Event D : 1049
(same message as point 2)
15.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
16.) Event ID : 1205
The Cluster service failed to bring clustered service or application 'SQL Server (MSSQLSERVER)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
first of all,I went through all the logs, and could not find the reason for fail-over initialization. There should be some thing logged why the failover happened? secondly after failover the service was not coming online due to duplicate IP address detection.
Later when we try to manually bring the service online from cluster management it comes online successfully. I don't understand how would duplicate IP address get resolved when we start manually.
Lastly we see few errors related to physical disk resource between failover retries, is this could be the correlated to failover error ?
View 4 Replies
View Related
Jan 12, 2013
I have a SQL cluster which ran out of disk the other day. I threw plenty more disk at the SAN. However, 1 of the databases came back with Recovery Pending and has been over 24 hours. I have tried to backup the database with no success. I don't have a clean backup from the day it occured so would have a good amount of work missing.
Running a dbcc check returns the following:
Msg 945, Level 14, State 2, Line 1
Database 'sqldb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I have not tried a dbcc check with REPAIR_ALLOW_DATA_LOSS as there seems to be a high risk of losing whatever was going on. how I can get the db back online?
View 10 Replies
View Related
Apr 9, 2015
We have 2 data centers, site 1 and site 2. Site 1 is generally our primary, and site 2 is our Disaster Recovery (DR) site. I want to setup a SQL instance to have extremely high availability. Therefore I was looking at using DB mirroring, with synchronous data writing, high-safety and auto-failover. This requires the usage of a witness server.My problem with this setup, is that if the witness and principal are both at site 1, if site 1 goes away (power failure, asteroid impact, lol, anything else that would be a *true* DR scenario), then there is no failover to the mirror server at site 2. However, if you put the witness at site 2, anytime the WAN link between site 1 and site 2 has an issue, the DB will auto-failover to site 2. Is the reason for the recommendation of the witness being at the primary site because the thinking is that WAN link failure is likely more common than a *true* DR scenario that takes out all of site 1?
View 3 Replies
View Related
Oct 29, 2015
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
View 5 Replies
View Related
Mar 3, 2007
We have set up Mirroring with a witness server and everything works fine when we failover from the SQL Management console.
However, if we failover when our Maccola client is connected, the client blows up - clearly because it can no longer connect to the database.
The ODBC DSN used by the Maccola client shows a checkbox for the 'select a failover server' but the checkbox is grayed out.
Also the summary of settings for the DSN at the end of the wizard reveals that the failover to server (y/N) option is set to N.
The default setting for this DSN is 'populate the remaining values by querying the server' but it doesn't appear to be getting the settings for failover from the server or any other interactive DSN settings either. The server is clearly set for mirroring.
Another suspicious item is that the DSN cannot connect to the server with SA permissions, even though the server is set to mixed security and we use the correct authentication.
Is it possible that the client MACHINE is not authenticating with the domain or sql server properly. We are logged into the client with the domain account that is the SQL admin account on the sql server box.
We should be able to interact with the sql server settings through the ODBC DSN on the client shoulnd't we?
Are we missing a service pack on the client?
Thanks,
Kimball
View 1 Replies
View Related
Dec 23, 2014
is bulk logged recovery model support point in time recovery
View 9 Replies
View Related
Sep 17, 2015
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies
View Related
Mar 27, 2007
Hello :
I have a Web application with reports which lasts for a long time, for it I reflected to make call Asynchronous for reports
(that is I execute the report and warned the user when the report is ready).
I found an example which supplied with SQL Server, but as I am novice C# I understands not everything in the example
( AsynchronousRenderCS).
Please indicate me a simpler example.
Thank you.
View 1 Replies
View Related
May 5, 2015
in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
View 6 Replies
View Related
Sep 19, 2015
We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies
View Related
Apr 8, 1999
Hi all,
Can anybody tell me if the have had any luck on creating and processing asychronous cursors. According to Microsoft SQL 7.0 books online after you create your Async cursor and then display the variable @@cursor_rows it should display either a negative number like -1245 meaning that it is still loading or a whole number meaning that it finish loading, but every time I display this variable I get -1 and according to MSSQL documentation this means I'm creating a Synchronous cursor, I have modified the cursor threshold settings, declared my cursor INSENSITIVE, and still can't get a cursor to be Async.
Thanks
View 1 Replies
View Related
Mar 21, 2007
What I am looking to do is have a stored procedure begin a dialog with my request service.
With that dialog established my stored procedure sends 50 request messages, one for each of the 50 of the United States. I want these to be processed asynchronously by a procedure that is called on activation for the request queue. In that activation procedure the request is processed against the respective state and a response message is sent to the response service (to the response queue). I want to be able to tie these request messages and response messages together with some type of shared identifier. These requests don't need to be processed in any specific order and don't need any fancy locking mechanism via conversation group since these requests require to be processed asynchronously. What is the best approach? Do I need to create 50 seperate queues and open dialogs with each? If this is the route to take, would this be a performance hit?
My goal is to have all 50 states process all at once, each finishing with a response message sent to the response queue. The initiating procedure, after sending these 50 requests, would then spin and wait for all 50 to complete, be it a response, error, or timeout. When all 50 have returned, the procedure would then merge the results and return. So as you can see in my scenario, I dont care when a state is complete as they do not affect the outcome, nor do they access any of the same resources when being processed.
View 3 Replies
View Related
Jul 13, 1999
We're looking for a solution to an audit trail issue. Our business people are looking to track each column value that changes(before and after images) for every table on our database as well as the userid that changed the data and when it was changed. Are there any methods that have been employed by other sites to track this level of detailed changes without resorting to triggers for each table and has anyone worked out a way for this audit trail writing to be handled asynchronously within SQL Server?
View 1 Replies
View Related
Oct 21, 2014
i tried to use xp_cmdshell in order to execute a vbscript from a trigger and it works, but i notice that trigger wait until the vbscript was terminated. i do some things into vbscript, so i can't wait until the end. There is a way to don't wait until the end, in practice, run vbscript in asynchronous mode??
View 6 Replies
View Related
Apr 19, 2007
Hi--done some searching, but I am not finding exactly what I need. I am using an asynchronous script component as a lookup since my table I am looking up on requires an ODBC connection. Here is what my data looks like:
From an Excel connection:
Order Number
123
234
345
The table I want to do a lookup on has multiple rows for each order number, as well as a lot of rows that aren't in my first table:
Order Number Description
123 Upgrade to System
123 Freight
123 Spare Parts
234 Upgrade to System
234 Freight
234 Spare Parts
778 Another thing
889 Yet more stuff
etc. My desired result would be to pull all the items from table two that match on Order Number from table one. My actual results from the script I have is a single (random) row from table two for each item in table one.....So my current results look like:
Order Number Description
123 Freight
234 Freight
345 Null
And I want:
Order Number Description
123 Upgrade to System
123 Freight
123 Spare Parts
234 Upgrade to System
234 Freight
234 Spare Parts
345 Null
etc.... Here is my code, courtesy of half a dozen samples found here and elsewhere...
Code Snippet
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports System.Data.Odbc
Public Class ScriptMain
Inherits UserComponent
Dim connMgr As IDTSConnectionManager90
Dim odbcConn As OdbcConnection
Dim odbcCmd As OdbcCommand
Dim odbcParam As OdbcParameter
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
connMgr = Me.Connections.JDEConnection
odbcConn = CType(connMgr.AcquireConnection(Nothing), OdbcConnection)
End Sub
Public Overrides Sub PreExecute()
odbcCmd = New OdbcCommand("SELECT F4211.SDDSC1, F4211.SDDOCO FROM DB.F4211 F4211 Where F4201.SHDOCO = ?", odbcConn)
odbcParam = New OdbcParameter("1", OdbcType.Int)
odbcCmd.Parameters.Add(odbcParam)
End Sub
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim reader As Odbc.OdbcDataReader
odbcCmd.Parameters("1").Value = Row.SO
odbcCmd.ExecuteNonQuery()
reader = odbcCmd.ExecuteReader()
If reader.Read() Then
With Output0Buffer
.AddRow()
.SDDSC1 = reader("SDDSC1").ToString
.SONumb = Row.SO
.SOJDE = CDec(reader("SDDOCO"))
End With
End If
reader.Close()
End Sub
Public Overrides Sub ReleaseConnections()
connMgr.ReleaseConnection(odbcConn)
End Sub
End Class
I just don't know what I need to do to get every row from F4211 where SDDOCO matches Row.SO instead of a single row...... Any ideas or help? Oh, the reason I am starting with my Excel connection is that sheet lists the Orders I need detailed data for, and is only a few hundred rows....F4211 is really really really big.
I have also worked out an alternate way to do this using merge join tasks...but then my datareader source goes off and fetches 300,000 rows from F4211 before my final result set of about 1200 rows. That just feels like a bad approach to me...or am I being over-cautious? I'm a newb (if you couldn't already tell)...so guidence is appreciated.
Thank you....
View 12 Replies
View Related
