Recovery :: Mirror Of A Database Part Of AlwaysOn AG
Sep 14, 2015
We have an AG scenario where we are using WFC on a 2 node cluster. We are then using AG for mirroring the databases to both nodes and have a listener.
What I want to do next is to establish another copy of the database at a remote location. But I don't want to add the 3rd system to the WFC. I am not a big fan of WFC and I have seen it causes many more problems. The 3rd system will be in a remote location and the network not 100% reliable. I have seen in the past that it causes the entire cluster to hang and causing my production to crash which I don't want.
I there a way to add a 3rd node to the mirror configuration. I don't know if I can add a 3rd node to the AG unless it is part of the same cluster.
I know I can configure log shipping, I am fine with it but in the source, I have no control of which node the DB will be. I am not sure if a log shipping scenario can be configured using the listener instead of the physical host.
We have a database with AlwaysOn enabled, where the database is getting mirrored using AlwaysOn to a secondary node in a two node cluster. Now we want to set up a DR site for that database in a different data center.
So trying to analyse what technologies. We can use for setting up the DR for that database. Can we use mirroring / replication or what's the best way of setting up DR on that database.
I have a 2012 AlwaysOn DB Mirroring environment set up with two nodes. Both have 5 installs of SQL named instances.
The issue we are having is when we patch one server and fail everything over, some of the applications will error. Some of the applications had to have their web.config files updated with hostinstance name because it seems to not work with DNS.
I have a situation where I have two servers in SQL Server 2012 R2 AlwaysOn Availability Group. One is primary and the other one being secondary. I am only running SharePoint Database on it.I have run out of space on the primary server and about to run out of space at the secondary server. I have tried shrinking database transaction log files, but it returns an error that it cannot be shrunk as the database is in the AlwaysOn Availability Group.
Questions: 1. Several forums suggest that databases need to taken out of AlwaysOn Availability Group in order for the shrinking to work properply? 2. Would it have any impact on the database if it is taken out of availability group and then added back?
I would ask if there some precaution on creating stored procedure on a database member of an always on group. I copied the stored procedure on all nodes but I'm not sure if this is enough to make it works in case of failover ?
I have configured replication between Always ON Availability Groups (Listener) (PUBLISHER), remote distributor to XYZ SUBSCRIBER...with above link ...
Now, I want to know how to replicate Data from XYZ SERVER a PUBLISHER to Always ON Availability Groups (Listener) (SUBSCRIBER)? Distributor Database being on XYZEX:
XYZ SQL SERVER as PUBLISHER, and DISTRIBUTOR to Always ON Availability Groups (Listener) SUBSCRIBER...
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
I'm having a problem with two mirrored databases, using SQL Server 2005 SP2, that autmatically failed over last night for unknown reasons. I was trying to fail them back over to the primary SQL server because it says the mirror is disconnected and out of sync. Other databases failed over too, but I was able to fail those back over without a problem. It's just these two. I removed the mirror from the secondary server thinking that this would allow me to restore the database back on the primary server, but that didn't help.
These two databases show a status of (Principal, Disconnected / In Recovery) and I still cannot do anything with the two databases on the primary server. When I try to pull up the properties for them, I get the following error:
"Database <Name> is enabled for Database Mirroring, but neither the partner nor the witness server instances are available: the database cannot be opened.(Microsoft SQL Server, Error: 955)"
I cannot delete, detach, Alter or do anything with the databases. If I could just delete them that would be fine so I can just do a restore, but I can't seem to do anything.
Does anyone know what I can do to resolve this problem.
We have a pair of SQL 2005 SP2 with Rollups clusters. We have a series of DB's that we are migrating from an existing SQL 2000 cluster. I have scripted the process, however on one of the test DB's, it goes to "In Recovery" as soon as I issue the Set Partner statement. There are other DB's on the same cluster mirrored with no problems. As we have a bunch of DB's to migrate, I want to figure out what would cause it to start a recovery. After the initial restores are done, it is in "Restoring" for a status so everything works up to that point. Thanks Jon Macy
DB replication can set db recovery model to simple ,why db mirror can not db recovery model to simple.
DB mirror must be set to full recovery model.
As far as I know, whatever db mirror and db replication ,there is a log reader to read the log in the ldf file DB mirror and DB replication are almost the same principle to replicate the db to another db server.
We have a client which they have production 2 node cluster environment. On it around 200 databases with single SQL instance.
Now client wants disatster plan for these 200 database. In these 200 database 3 db's are around 80 GB each databases remaing are less than 5 DB.Note: All these 200 db's are having produciton sites (i mean to say each db is having single site)
For this DR paln clinet is going to provide other DR server,they wants to setup DR between exsting produciton cluster instance to this DR server.
So in this case we have suggest SQL server AlwaysOn availability group.
Here my main question is can we keep all these databases in single AG? .If yes, guidlines to move up. if not, do we have any limitations.Also, best method to setup for this DR plan.
Merge replication on AlwayOn is configured, working fine on Original Publisher.When failover to possible publisher data is not being replicated.
Replication Monitor Error:
Message: Validation failed for the publisher 'RIMDNS' with error 21879 severity 16 message 'Unable to query the redirected server 'RIMDNS' for original publisher 'UNITEDKINGDOM' and publisher database 'TD_AO11' to determine the name of the remote server; Error 2, Error message 'Error 2, Level 16, State 1, Message: Named Pipes Provider: Could not open a connection to SQL Server [2]. '. '.
I've set up a SQL server 2014 cluster with AlwaysOn availability groups. Upon creating the AG i opted for full syncronisation to a specific SMB share.Now i want to change that share because it has to move to a new server. How can i do that? I found no settings in the SSMS for that.
How do I add my second (secondary) node in my AlwaysOn Availability Group, after adding my head node, and the secondary node is a virtual machine. See based on the attached file if it is the correct way?
We've just started using AlwaysOn High Availability and run into a wierd issue. I have 1 particular database that is not syncing data to the secondary replica. But when i look at all the dashboards, everything is green, they all say synchronised - but if I query the data they are not.
The database has additional sql transactional 1 way replication a different server which i was wondering if was causing any problems, but it's working ok.
I'm just wondering if there's any other more detailed logs i can check to see why the data is not flowing. The availability dashboard and it's event log all says ok.
How to test always on availablity after configuring them.I have configured always on group with 1 active and 1 passive with readonly.I want to test from application.what are cases which we can have for testing.
My environment has a 4 node cluster , 2 in primary and 2 in sec dc. Storage is sperate for both.
Need to setup always on for 4 Instances there on the 2 nodes of the primary dc. Is there any restriction in setting up always on for multiple instances for a cluster.
I know that AlwaysOn creates a WSFC role in order to provide failover of the Availability Group Listener. But does it also "honor" the WSFC network setttings? What I'd like to do is isolate the client-side traffic from the database replication traffic. But it's not clear to me that AlwaysOn even uses that part of WSFC.
a) Can you totally isolate the traffic as I've described?
b) Does AlwaysON actually use WSFC network settings? If yes, then I guess I cannot do what I want, since my choices are Cluster & Client, or Cluster Only.
I have had a serious issue with a production AlwaysOn cluster whereby the service did not successfully transition to the secondary node and I cannot find the root cause of the issue.
Some details: It is a 2 node cluster (same datacenter) with a shared disk quorum, Windows Server 2012, both are virtual machines running on VMWare vSphere 5.5. SQL Server version is 2012 Enterprise SP2 CU6
The failover occurred because of a network incident (a spanning tree recalculation caused a connection timeout between both nodes). Initial entries in the SQL Log look normal for this event, for example:
05/08/2015 11:18:06: A connection timeout has occurred on a previously established connection to availability replica 'FIN-IE-PA078' with id [6910F4A9-87E7-4836-BA79-0F41BE90266D]. Either a networking or a firewall issue exists or the availability replica has transitioned to the resolving role. 05/08/2015 11:18:06: AlwaysOn Availability Groups connection with secondary database terminated for primary database 'UserManagement' on the availability replica with Replica ID: {6910f4a9-87e7-4836-ba79-0f41be90266d}. This is an informational message only. No user action is required.
[code]....
My interpretation of this is that the cluster failover attempts failed, because the network condition still persisted. The network interruption lasted approximately 2 minutes, and I would have expected the cluster to come back online at this point, after the restart delay period as suggested in the last entry in the error log. However this did not happen.
We have a SQLServer 2012 Always-On Availability (AAG) Primary and Secondary Node installation/environments. On the Primary node, we have some databases that have the TRUSTWORTHY option enabled (Set to ON). But when the databases are synched/added to the AAG the databases loose the TRUSTWORTHY property and are reset to OFF on the Secondary Node.Because of this,When the instance fails over to the Secondary Node the applications that were working don’t work anymore.
we have to build high availability SQL 2012 cluster for VDI and we have two options. One option is to build a server cluster with combination of failover and mirroring and other option is to build failover cluster with AlwaysOn.We are not sure which option to chose. We have contacted Microsoft support to provide us some documents and instructions for failovermirroring combination but they have send us instructions for AlwaysOn option.
What would be best way to build high availability cluster for VDI? Also, since first option is very complicated.
I have configured AlwaysOn HA setup with HyperV environments without shared disk and using quorum voting in file share witness.
1. I want to monitor AlwaysOn HA setup and AO Group database on daily basis. 2. To configure email alerts for proactive monitoring if unusual events occur.
Scripts for monitoring in that AO setup as well as AO group database ...
I have a 3-nodes AlwaysOn cluster (Windows Server 2008 R2 SP1 + SQL Server 2012 RTM), Node Majority quorum, the quorum vote for each node is 1.
Today the AlwaysOn AG was suddenly down due to the cluster service on node 1 stopped and can't be started.
The error in eventlog is -
The cluster database could not be loaded. The file may be missing or corrupt. Automatic repair might be attempted. The Cluster Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
The failover cluster database could not be unloaded. If restarting the cluster service does not fix the problem, please restart the machine.
The Cluster Service service terminated with service-specific error The system cannot find the file specified..
The error log in cluster log is -
0000156c.000008f8::2012/09/05-08:09:36.057 INFO [DM] Key RegistryMachineCluster.restored does not appear to be loaded (status STATUS_OBJECT_NAME_NOT_FOUND(c0000034)) 0000156c.000008f8::2012/09/05-08:09:36.057 WARN [DM] Node 1: Failed to unload restored hive from the registry with error STATUS_INVALID_PARAMETER(c000000d) 0000156c.000008f8::2012/09/05-08:09:36.057 INFO [DM] Node 1: loading local hive 0000156c.000008f8::2012/09/05-08:09:36.057 ERR [DM] Node 1: failed to unload cluster hive, error 2.
Now the cluster service can't be started on node 1, error code 2. Looks like the clusdb in C:windowscluster is missing or corrupted. How to restore the clusdb file? And how to prevent this happen again?
All nodes were well patched, AlwaysOn and cluster related hotfixes were all installed. [URL] .... doesn't wok.
I was looking to change the file growth setting in our AlwaysOn environment databases.We have a single availability group, one primary and one secondary replica. I learned that when changing the file growth setting on the primary databases (data file), the change flows though to the database on the secondary replica.However after doing the same with the log files, the file growth setting changed on the primary but the change did NOT propagate to the secondary.
Is the solution to apply the change directly to the secondary?here's the T-SQL code I used:
ALTER DATABASE myDB MODIFY FILE ( NAME = N'myDB_log', FILEGROWTH = 512MB ); GO SQL Server 2012 (11.0.5532)
OS - Windows 2012 R2 Standard Edition. DB - SQL 2012 Enterprise edition
Total 3 nodes participates for AO setup, 2 Nodes for Local HA and 1 Node for another datacenter for DR. All the 3 Nodes are same domain name and member.
1. Local First 2 Nodes are same subnet XXX.XX.44.XX 2. DR Node another subnet XXX.XX.128.XX
Does it require to add two different IP address while creating cluster name? Not using shared disk SAN storage etc.. I am using Node majority quorum witness setting for failover.
I noticed that after a SQL AlwaysOn failover, one of the DB in the secondary replica is stuck in Restoring state. The primary replica shows that it is in a synchronized state. These are the error logs from SSMS. How do I trace the cause of the problem?
Error: 5901, Severity: 16, State: 1. Nonqualified transactions are being rolled back in database for an AlwaysOn Availability Groups state change. Estimated rollback completion: 0%. This is an informational message only. No user action is required Error: 18400, Severity: 16, State: 1.
One or more recovery units belonging to database failed to generate a checkpoint. This is typically caused by lack of system resources such as disk or memory, or in some cases due to database corruption. Examine previous entries in the error log for more detailed information on this failure.
The background checkpoint thread has encountered an unrecoverable error. The checkpoint process is terminating so that the thread can clean up its resources. This is an informational message only. No user action is required.
I recently configured SQL Server 2012 AlwaysOn Availability group using two nodes - a primary and one secondary read only replica. The group is residing on a windows 2012 cluster with an smb file share as the quorum. I am able to successfully failover through SQL and through the windows 2012 cluster. When I look at the group dashboard on the primary server and view the Operational state of each node I notice an odd value. The secondary role server is listed as Unknown. I also noticed that the Availability replicas node icons in object explorer are displaying the same icon on the primary server but on the secondary server, the primary server is shown as a server with a question mark.
Am I missing a permissions setting or is this normal behavior.
For example:
ServerA is the primary ServerB is the secondary ServerA lists the servers in Object Explorer as:
ServerA (Primary)ServerB (Secondary) ServerB lists the servers in Object Explorer as:
ServerA ServerB (Secondary)
The primary is never listed a primary on the secondary server. Again failovers are working properly, but I want to be sure I am not missing a setting somewhere.
I'm doing a certification process using AlwaysOn, and was using the link below, and on the lower 90 hotfix, and instead of downloading one by one, and then upgrade one by one updates, is there any way to make it more faster or practical, or unfortunately have to do this one by one, so the download as the update? This rollup contains the latest version of the Windows system files that are updated after the release of SP1. URL...
I am new to always on management, I would like to know if exist a best practice for configuring maintenance plan on a alwayson system (two nodes) or is just running the maintenance plan wizard on both nodes.
I believe to configure maximum number of replicas it is required to have 5 nodes (1 Primary & 4 Secondary replicas). But how many databases can be included in one availability group, it think it is 32767. When I am referring to below URL it is mentioned something like "An availability group supports a set of read-write primary databases and one to eight sets of corresponding secondary databases. " What does this 'sets' means, is that maximum limit for only eight databases or maximum groups should be eight?
