My environment has a 4 node cluster , 2 in primary and 2 in sec dc. Storage is sperate for both.
Need to setup always on for 4 Instances there on the 2 nodes of the primary dc. Is there any restriction in setting up always on for multiple instances for a cluster.
Is it possible to have more than one instance of SQL Server on a failover Active/Passive cluster? What are the concerns/ramifications if that indeed is possible?
View 4 Replies View RelatedWe have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies View RelatedI have a 2012 AlwaysOn DB Mirroring environment set up with two nodes. Both have 5 installs of SQL named instances.
The issue we are having is when we patch one server and fail everything over, some of the applications will error. Some of the applications had to have their web.config files updated with hostinstance name because it seems to not work with DNS.
I have had a serious issue with a production AlwaysOn cluster whereby the service did not successfully transition to the secondary node and I cannot find the root cause of the issue.
Some details: It is a 2 node cluster (same datacenter) with a shared disk quorum, Windows Server 2012, both are virtual machines running on VMWare vSphere 5.5. SQL Server version is 2012 Enterprise SP2 CU6
The failover occurred because of a network incident (a spanning tree recalculation caused a connection timeout between both nodes). Initial entries in the SQL Log look normal for this event, for example:
05/08/2015 11:18:06: A connection timeout has occurred on a previously established connection to availability replica 'FIN-IE-PA078' with id [6910F4A9-87E7-4836-BA79-0F41BE90266D]. Either a networking or a firewall issue exists or the availability replica has transitioned to the resolving role.
05/08/2015 11:18:06: AlwaysOn Availability Groups connection with secondary database terminated for primary database 'UserManagement' on the availability replica with Replica ID: {6910f4a9-87e7-4836-ba79-0f41be90266d}. This is an informational message only. No user action is required.
[code]....
My interpretation of this is that the cluster failover attempts failed, because the network condition still persisted. The network interruption lasted approximately 2 minutes, and I would have expected the cluster to come back online at this point, after the restart delay period as suggested in the last entry in the error log. However this did not happen.
we have to build high availability SQL 2012 cluster for VDI and we have two options. One option is to build a server cluster with combination of failover and mirroring and other option is to build failover cluster with AlwaysOn.We are not sure which option to chose. We have contacted Microsoft support to provide us some documents and instructions for failovermirroring combination but they have send us instructions for AlwaysOn option.
What would be best way to build high availability cluster for VDI? Also, since first option is very complicated.
I have a 3-nodes AlwaysOn cluster (Windows Server 2008 R2 SP1 + SQL Server 2012 RTM), Node Majority quorum, the quorum vote for each node is 1.
Today the AlwaysOn AG was suddenly down due to the cluster service on node 1 stopped and can't be started.
The error in eventlog is -
The cluster database could not be loaded. The file may be missing or corrupt. Automatic repair might be attempted.
The Cluster Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
The failover cluster database could not be unloaded. If restarting the cluster service does not fix the problem, please restart the machine.
The Cluster Service service terminated with service-specific error The system cannot find the file specified..
The error log in cluster log is -
0000156c.000008f8::2012/09/05-08:09:36.057 INFO [DM] Key RegistryMachineCluster.restored does not appear to be loaded (status STATUS_OBJECT_NAME_NOT_FOUND(c0000034))
0000156c.000008f8::2012/09/05-08:09:36.057 WARN [DM] Node 1: Failed to unload restored hive from the registry with error STATUS_INVALID_PARAMETER(c000000d)
0000156c.000008f8::2012/09/05-08:09:36.057 INFO [DM] Node 1: loading local hive
0000156c.000008f8::2012/09/05-08:09:36.057 ERR [DM] Node 1: failed to unload cluster hive, error 2.
Now the cluster service can't be started on node 1, error code 2. Looks like the clusdb in C:windowscluster is missing or corrupted. How to restore the clusdb file? And how to prevent this happen again?
All nodes were well patched, AlwaysOn and cluster related hotfixes were all installed. [URL] .... doesn't wok.
I'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard. When I enter the name of the target node (secondary replica) server and press connect, I get the following:
A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
The SQL Browser service is up and running on the target. I am using an Azure VM for my SQL instance. This cluster spans geographies from our on-premise site to Azure via a VPN. This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03.
[URL]
Full error:
Connect to Server
Cannot connect to ssasnodeaz03
Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
I have a Windows 2008 R2 Always on Cluster with 3 nodes (two in the primary site and one in the DR site).
Primary Site:
-Primary Site Server1
-Primary Site Server2
DR Site 1 (to be decommed):
-DR Site Server1
Our company is planning on decommissioning the DR site. But before we do this, we want to add a 4th site to the cluster. Migrate the data...and then decommission the original DR Site.
Is it possible to have this configuration:
Primary Site:
-Primary Site Server1
-Primary Site Server2
DR Site 1 (to be decommed):
-DR Site Server1
DR Site 2 (NEW DR Site):
-DR Site Server1
IF this is possible, do I simply add the new DR site to the existing cluster (same steps as adding the first DR node to the cluster when the cluster was originally configured? or are there special steps?
Came across this scenario in AlwaysOn Availability Group (two node), file share witness times out and RHS terminate and cause the cluster node to reboot. File share witness is for continuous failover and if the resource is unavailable my expectation was that it should go offline and should not impact Server or Sql Server. But its rebooting the cluster node to rectify the issue.
Configuration
Windows Server 2012 R2 (VMs)
Sql Server 2012 SP2
Errors
A component on the server did not respond in a timely fashion. This caused the cluster resource 'File Share Witness' (resource type 'File Share Witness', DLL 'clusres2.dll') to exceed its time-out threshold. As part of cluster health detection, recovery actions will be taken. The cluster will try to automatically recover by terminating and restarting the Resource Hosting Subsystem (RHS) process that is running this resource. Verify that the underlying infrastructure (such as storage, networking, or services) that are associated with the resource are functioning correctly.
The cluster Resource Hosting Subsystem (RHS) process was terminated and will be restarted. This is typically associated with cluster health detection and recovery of a resource. Refer to the System event log to determine which resource and resource DLL is causing the issue.
We are running with a 2 node windows cluster having three SQL instances on it.
OS: Windows server 2008R2 SP1
SQL : SQL server 2008R2 (10.50.6529)
Currently both nodes have 256 GB or memory and we are having multiple auto failover for resources. What will be the best practice for OS memory reservation (OS+tools) so that we can set SQL max memory settings accordingly?
I have getting issues when i am creating listener for always On . Error shown as below
Can not bring the Windows server fail over cluster (WSFC) resources online. (Error Code 5942). The WSFC service may not be running or may not be accessible in its currents states, or the WSFC resources may not be in a state that could accept the request.
For information about this error code see "system error code" in windows development documentation
The attempt to create network name and IP address for the listener is failed. The WSFC service may not be running or may not be accessible in its currents states or the value provide for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate network name and IP address with network administrator. (Microsoft SQL Server error 41066) ...
I am looking for information on setting up multiple instances of SQL 2014 on a single server and then adding each of those instances into availability groups. Is this supported?
Currently I have a test environment with 3 SQL 2014 servers and a domain controller. The 3 SQL servers are in a WSFC and I have an availability group setup for 3 databases. This setup works great. Now to add another level of complexity to this, I would like to install another SQL instance on each of the 3 SQL servers and then build another availability group for this new instance. Is this possible?
I have a need to add a second Sql instance to an existing cluster. However I read in this article http://www.sql-server-performance.com/articles/clustering/clustering_best_practices_p1.aspx
that this is not recommended. Does anyone know why this is or what problems I may encounter?
Its is running Sql 2005 on a 64 bit windows Server 2003.
I have a need to add a second Sql instance to an existing cluster. However I read in this article http://www.sql-server-performance.com/articles/clustering/clustering_best_practices_p1.aspx
that this is not recommended. Does anyone know why this is or what problems I may encounter?
Its is running Sql 2005 on a 64 bit windows Server 2003.
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
Hi,
I have 2 W2K box's and want to install 4 SQL servers on each box & each different character set and want to setup clustering (Active - passive).
Do any one of you setup this type environment ?, Pl. let me know if you have any suggestions ..
Regards,
Madhu
We have 5 instances on our clients old machine with SQL 2005, now they want us to move on cluster environment with SQL 2012.
Once I have installed and configured SQL cluster with single instance, but how to install SQL Cluster environment for Multiple instances.
Should I install all the instances first and than have to configure cluster ?
OR
Is there any way that first I will install cluster and than we can add the instances ?
What I have- Sql server 2012 (Standard Ed) Cluster on Windows 2012 R2 with both instances running on the same node- just to save on License, i.e. technically it’s Act/Pas cluster.
What I am looking for- how to configure cluster (e.g. via quorum, etc) to force both instances failed together? Means if for some reason 1-st instance will fail to node 2 another instance should follow (otherwise it will be Act/Act cluster and 2-nd license is required).
If there is no standard way (cluster configuration I mean) to do it I should create some custom process to monitor where each instance is running.
Hi All..
We are planning to build a cluster environment on MS SQL 2005. We want to install multiple named instances in a single database server and use cluster for that database server.
Is this option possible ? Any relevant documentation would be helpful
Thanks in advance
Regards
Madhav
Hi There
I have found no real documentation on this, so any links would be greatly appreciated.
We have an existing 2 node active active cluster.
A default and and named instance SS2005 Enterprise Edition are installed on the cluster.
Recently we acquired new hardware, 2 servers, which we added to the cluster so we now have a 4 node cluster.
The 2 new nodes have OS etc installed.
Now i have installed sql on a new multi node cluster, i have upgraded sql server in an existing cluster BUT i have never installed sql on an existing cluster for new nodes for multiple instances.
Now i presume you simply run the install on one of the new nodes, do this for a default instance, selecting both 2 new nodes to installl on. And do this again for the named instance.
But in the past I have never been promoted for which nodes to install sql on, it simply does all the nodes BUT i do not want this.
And how will the cluster know where the binary files are for each instance on the new nodes?
In a nutshell, how do i install sql server 2005 for 2 new nodes in an existing 4 node cluster for multiple instances ?
Thanx
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Do you need to enable Always on Availabilty on all the instances or only the instance you need to ?. We have 4 instances on a 5 node cluster and we only need one instance for the Always on to be enabled. Do we need to enable on all 4 instances ?
View 4 Replies View RelatedCan we set up always on availability groups in server 2012 standard edition.
View 3 Replies View RelatedWe have a client which they have production 2 node cluster environment. On it around 200 databases with single SQL instance.
Now client wants disatster plan for these 200 database. In these 200 database 3 db's are around 80 GB each databases remaing are less than 5 DB.Note: All these 200 db's are having produciton sites (i mean to say each db is having single site)
For this DR paln clinet is going to provide other DR server,they wants to setup DR between exsting produciton cluster instance to this DR server.
So in this case we have suggest SQL server AlwaysOn availability group.
Here my main question is can we keep all these databases in single AG? .If yes, guidlines to move up. if not, do we have any limitations.Also, best method to setup for this DR plan.
Merge replication on AlwayOn is configured, working fine on Original Publisher.When failover to possible publisher data is not being replicated.
Replication Monitor Error:
Message: Validation failed for the publisher 'RIMDNS' with error 21879 severity 16 message 'Unable to query the redirected server 'RIMDNS' for original publisher 'UNITEDKINGDOM' and publisher database 'TD_AO11' to determine the name of the remote server; Error
2, Error message 'Error 2, Level 16, State 1, Message: Named Pipes Provider: Could not open a connection to SQL Server [2]. '. '.
[Code] ....
How many maximum database's can we have in AlwaysON Availability Group?
View 3 Replies View RelatedI've set up a SQL server 2014 cluster with AlwaysOn availability groups. Upon creating the AG i opted for full syncronisation to a specific SMB share.Now i want to change that share because it has to move to a new server. How can i do that? I found no settings in the SSMS for that.
View 3 Replies View RelatedWe have an AG scenario where we are using WFC on a 2 node cluster. We are then using AG for mirroring the databases to both nodes and have a listener.
What I want to do next is to establish another copy of the database at a remote location. But I don't want to add the 3rd system to the WFC. I am not a big fan of WFC and I have seen it causes many more problems. The 3rd system will be in a remote location and the network not 100% reliable. I have seen in the past that it causes the entire cluster to hang and causing my production to crash which I don't want.
I there a way to add a 3rd node to the mirror configuration. I don't know if I can add a 3rd node to the AG unless it is part of the same cluster.
I know I can configure log shipping, I am fine with it but in the source, I have no control of which node the DB will be. I am not sure if a log shipping scenario can be configured using the listener instead of the physical host.
How do I add my second (secondary) node in my AlwaysOn Availability Group, after adding my head node, and the secondary node is a virtual machine. See based on the attached file if it is the correct way?
View 2 Replies View RelatedWe've just started using AlwaysOn High Availability and run into a wierd issue. I have 1 particular database that is not syncing data to the secondary replica. But when i look at all the dashboards, everything is green, they all say synchronised - but if I query the data they are not.
The database has additional sql transactional 1 way replication a different server which i was wondering if was causing any problems, but it's working ok.
I'm just wondering if there's any other more detailed logs i can check to see why the data is not flowing. The availability dashboard and it's event log all says ok.
In the case of a manual failover, what happens to open transactions. Are they killed (rolled back), completed, a little bit of both?
Does the status of the query has any impact (are running queries handled differently then waiting ones, does the type of wait have an impact...)
I am using synchronous commit mode and all I seem to find is reference to the potential or absense of loss of data.