Out of using stored procedure, reports and all this staff, I want to know the possible way to make sure that the data inside my Secondary Server Read only database are same as data in my primary server database.
So what is the simple way to do this check?
Setup log shipping from an Australian SQL2008R2 server to a UK SQL2012 server. With the time involved to copy the large backup file across a WAN link, we end up with around 2 days of log backups since the full backup.
- The Full Backup is restored to the UK Server to create a new database in norecovery mode.
- The first log backup file is manually copied to the UK server and restored.
- Start the Log Ship copy SQL Agent job - starts copying files prior the full backup on the Australian server. Copies 1 Log backup file and then fails.
- Manually copy the next Log backup file to the UL server.
- Start the Log Ship Restore SQL Agent job and runs successfully and restores the Log file.
- Start the Log Ship copy SQL Agent job - AGAIN it starts trying to copy files prior to the Full Backup. IS this correct behaviour? I thought it should only copy Log files since the full backup.
Hi,
We currently have a couple a large Databases running on SQL 2000 SP3 Clustered Windows 2000 SP3 environment.
Log Shipping is enabled for both databases shipping to a Standalone SQL 2000 SP3 Windows 2000 SP3 box.
Log Shipping occurs every 15 mins with the Transaction Files on average being no more than 500KB in size. However, every now and then a Transaction Log comes through and it can be as big as 3.52GB.
Not sure why this is happening. Anyone got any ideas?
Regards
Paul Towler
Coming from a (mostly) Oracle shop, I am unclear how SS transaction logswork as far as up to point of failure recovery goes.I have the few MSSQL databases I look after in full recovery mode, and Iset up maintenance plans to back these up online on a daily basis. Inthe research I did it was recommended backing up the transaction logs aswell on a frequent basis to ensure recovery to POF or point in time.I had assumed that they work like Oracles archive logs, in that oncethey are full they are archived to disk in case they are needed, toduplex destinations if need be. Does SS do this, or do I need to bebacking up transaction logs on an hourly (or shorter) basis? In lookingat enterprise manager I see that it does not look like the transactionlogs are archived anywhere, but overwritten once filled up, similar toOracle noarchivelog mode, in that if you lose your online redo logs oranyone of them has recycled since your last backup, then you can onlyrecover to the last good backup.Is this a correct assumption? Should I be backing up transaction logshourly to make sure I can have PIT or POF recovery?thanksTG
View 3 Replies View RelatedLog shipping was configured 6 months back. A Transaction log file got corrupted today. How to resolve this?
View 20 Replies View RelatedI've got log shipping set up, and everything seems to be working fine, but the log files are not being deleted from the primary server despite configuring log shipping to retain them for 3 days. I see no errors concerning the log shipping, but did not configure a monitor. What process is responsible for deleting the older log backups, and how can I look for errors. I could simply set up a jog to delete the older files, but that will only mask the issue.
View 3 Replies View RelatedHi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Is there any possibility of loosing data ?
Thanks
Hi
DepartmentMaster table has been deleted
how can I retrive the data from transaction log?
thanks
in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
hi
If wanted to set up Logshipping between two sqlserver 2005 enterprise edition servers.The transaction log backup is being taken every 2 hours and with approx size of 1GB - 1.5 GB.
Now before the copy job runs,i want to compress the tlog file on primary server,copy it to secondary server and uncompress it on secondary and then apply transaction logs to secondary server.I need the procedure how to do it.Please help out.
Thx in advance
Regards
Arvind
We're planning to implement log shipping on our databases, and I have been toiling with it all weekend trying to get it to work on some test databases. The result is the same whether I do it via the wizard or manually via T-SQL.
I am using 3 servers, all SQL Server 2005 Standard SP1. All 3 SQL Servers are configured identically.
When I setup log shipping, it initializes with no problems. When it processes the first tran log file, it restores it with no problem. Every successive log file thereafter is not restored. No errors are generated. The only outright indication of a problem is that the monitor server shows that there has not been a recent restore.
The backup and copy both suceed. The restore claims to suceed. If I review the job history for each step, it says that it skipped the log file and then reports that it did not fina any log files to restore.
Message
2006-11-06 05:00:01.92 Skipped log backup file. Secondary DB: 'MyDemo', File: 'D:MSSQLBackupMyDemoMyDemo_20061106115619.trn'
Message
2006-11-06 05:00:01.95 Could not find a log backup file that could be applied to secondary database 'MyDemo'.
2006-11-06 05:00:01.96 The restore operation was successful. Secondary Database: 'MyDemo', Number of log backup files restored: 0
Any ideas or suggestions?
hello everybody
I have custom log shipping .
it run every 15 min
DB1 located on Server1
DB1 backup logs to server 2
DB2 located on server 3(300 km away from server1 and server 2)
Db2 restore logs from server 2
If server1 and server2 become unavailable
1.
Would enough login to server3
and
run
RESTORE DATABASE Db2
WITH RECOVERY
to bring db from read only to production mode up last restored log?
Thank you
Alex
I have a warm standby (secondary server) receiving log shipping files.
The database has 5 files all in the primary filegroup. Two of the files need to be moved from one hard drive to another. Whats the best way / process to accomplish the move and re-establish the log shipping recovery status?
Thanks
I'm allowed to do Log Shipping from x.contoso.com to y.contoso.com, however there is a requirement to have the same data made available to servers residing on z.contoso.com.
Connectivity between x.contoso.com and z.contoso.com is not permitted, so configuring log shipping with multiple targets is not possible.y.contoso.com and z.contoso.com can talk to each other, so what is the most efficient way to move data from y to z.
I have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.steps needed to setup TDE which are involved with log-shipping.
View 2 Replies View RelatedLets say I have a single instance SQL Server on a 2 node cluster with node names Server X and Server Y. These are part of Domain A.
SQL Agent Account runs under service account - DomainASQLAct.
Now I have Server Z which is a standalone SQL Instance on Domain B and there is no trust between domain A and B, not even one way trust.
Even though I dont have trust, I need to configure log shipping for the SQL Instance which is clustered under Domain A to a standalone box in Domain B.
Microsoft recommends Local Account(SQL Agent) to be used for Cross Domain Log Shipping. Also when there is no trust, MSFT recommends to use the same login name and password, however as my setup includes a cluster and cluster cannot have local account I'm not sure what will be the best strategy to follow here.
I am trying to imitate a DR situation where the primary db is down and I need to recover the secondary db on another server. They are a log shipping pair and so to imitate a DR, I remove the log shipping in the primary server maintenance plan. Then I go to the secondary server and disable the log shipping jobs there and attempt to do the following
RESTORE DATABASE database_name WITH RECOVERY
but I can't get exclusive use because the database is in use. But I don't see any other users... am I wrong in thinking that the log shipping was completely deleted? Anything I can do to force exclusive access?
I have two databases on a Production Server that I want to Log Ship to a Test Server. According to the sys.master files the physical File Location is on an E drive. Early attempts at Log Shipping these two files error'd out due to space issues on the E drive (one Log Shipped and then one err'd out). I was subsequently informed from the server group that they would prefer that I Log Ship these two database files over to the M Drive where more space is available. In fact, they modified the Server Properties / Database Settings / Database Default Locations (for Data and Log) to the larger M drive (I'm not really sure why they just don't increase the E drive space but there is proabably a good reason).
Okay, so now my problems have been solved. Easy enough. Now I deleted the successful Log Shipped database and started from scratch. However, as before, one db restored and one failed (due to space issues). Apparently, both db are pointing towards the E drive. How is that possible?
So here I am with one successful database and the normal sys databases pointing to the E drive. What is the best way of approaching this move to the larger and preferred M drive?
Is It Possible to Configure Log Shipping On a CDC Enabled Database?
View 4 Replies View RelatedSQL Server 2012: Out of all the databases in the instance we have a requirement in which we need to maintain a high availability for the databases around (128). Our team believed log shipping will apt for this requirement but not sure on it's limitations, how many databases are allowed or supports this log shipping from a single instance.
View 7 Replies View RelatedI want to redirect the logshipping primary backup folder to another drive, how to change the configurations steps to move the primary logship folder to another location within the same server!
View 2 Replies View RelatedWe tried to configure log shipping using script generated by GUI and when executed specific script which is meant for secondary server the database is not created and threw below error.
Msg 15010, Level 16, State 1, Procedure sp_add_log_shipping_secondary_database, Line 50
The database 'BUBALLO' does not exist. Supply a valid database name. To see available databases, use sys.databases.
Note: Only Copy, restore and alerts jobs have been created.
The account I'm trying to configure log shipping is the service account by which SQL and agent services are running and folder in where data and log files are intended and to be created is open to all (everybody has read/write permissioins) believe the issue is not with permissions.
I recently enabled log shipping on our production database, and I had initially accepted the default of 72 hours to delete copied logs. Well, i am running out of space quick, and I need to edit it to something like 6 hours.
When I try to disable log shipping in order to recreate it, or if I try to edit the secondary server settings when I am logged in as SA, or my windows account which has the sysadmin role assigned, I get an error that says:
Only members of the sysadmin fixed server role can perform this operation. Error 21089.
I've restarted the sql service, disabled and enabled the permission on my account, but for the life of me, i cannot get this to work!
What is the best way to clear the transaction logs. My backup job each night is ending because it says it is running out of disk space and I need to clear up the transaction logs. Any help is appreciated. I see many different options (trucate option, auto shrink, etc.), just need some assistance tosome more specific best approaches. Thanks
View 3 Replies View RelatedIm having issues truncating my transaction logs. I have logs in excess of 40 gigs. All the info in the BOL is very vague. Any assistance would be apreciated.
Regards
SeTi Ni
When we backup the transaction log,will it truncate the log or it will grow from there?Truncate log on check point is desabled.
Thanks!
to take the transaction log back up regularly I should have truncate log on check point false. If I do so then how will I truncate the log.
regards,
Renu
I am trying to import records via bcp (about 1,500,000 records) and I keep running out of disk space. Is there any way to limit or do away with the transaction log (and still be able to import)?
View 2 Replies View Relatedhow do i decrease the transaction log example 500mb to 100mb, can you help me with the syntax pls!!
View 1 Replies View RelatedI need to move transaction logs to a different drive and am looking for a way to do it without detaching the db.
Can I create a second transaction log file for the DB and then delete the original log file?
What is the best way to do this for db's that are being replicated?
Thanks,
Ken Nicholson
I need to seperate my SMS data files and transaction logs onto two seperate drives. Can anyone assist me with this?
thanks...
HELP!!!!
When I look at the Database maintience plan history entry for backup I have a message that reads: "Backup can not be performed on this database. This sub task is ignored".
Have anyone come across this error before?? As part of the Maintenance plan some transaction log are being backup and some aren't instead they receive the message above.
Thanks
Lystra
Has anyone ever had the problem of the IT department not backing up thier transaction logs simply because they didnt find it necessary??
View 3 Replies View Related