why my listener has two dns entries? Shouldn't it only have the active node's address? I have the cluster RegisterAllProvidersIP set to 0. We have two synchronous local sql 2012 servers on windows 2012 r2 and one remote (different subnet) asynchronous node. Is it safe to manually delete the dns record that's pointing to our remote listener? Why did it add both of them?
View 7 RepliesI have setup two node SQL 2012 Always ON cluster with file share witness. I have configured two networks, one for heartbeat and second for public.My question is do I need a third network/ subnet for AG Listener? Which network does the SQL user databases in the AG group use to replicate between the replica servers?When I do the SQL backups, do I need to backup primary and secondary replicas or just backup the databases in the secondary replica?
View 4 Replies View RelatedAfter manual AG fail-over from primary to secondary the application is not able to connect the listener name for atleast for 5 - 10 mins
The telnet fails during this time from app server, the listener ip is on muti-subnet.
At the same when i try to connect it from SSMS from a remote machine it works fine.
We have a server A and a server B setup with SQL2014 High Availability - working fine.
I need to add an additional listener to our new DR site (SQLNODECOLO).
What is the best way to do this without impacting production?
Can I just go to server A and add the new listener server here (SQLNODECOLO):
I am not able to connect listener after manual failover.
(This is test environment)
Server1,Server3 -> Both synchronous (Within Same data center)
Server 3 -> Async (At DR location) -Forced Failover
Test1:
Failover Server1 to Server2 --> Able to connect Listener
Failover Server2 to Server1--> Able to connect Listener.
Failover Server1 to Server3--> Able to connect Listener.
Failover Server3 to Server1 or 2 --> Unable to connect Listener. Unable to ping Listener.
Failover Server 1or2 to Server3--> Able to connect Listener.
I am using below sub-nets:
10.11.192.0/22 10.11.192.130
10.12.192.0/22 10.12.192.140
In our(my company) current design we want to switch from failover clustering to Always On as high availibility solution.
I am currently testing the availiblity Group Listener function and have two questions regarding this.
First of all, is it possible to connect to a a listener by just using its "name" instead of "name,port", it is for our users very inconvenient to start using ports. If this is possible, where can I find information on how to configure this?
Second, is it possible to use the Availiblity Group Listener as loadbalancer or in combination with a loadbalancer to split the users over two or more nodes?*note we don't use azure.
Assuming all windows servers belonging to the WSFC are on the same subnet, will the AG listener become a single failure point in system if all Application servers connect to the AG through the listener? If the answer is yes, what are the options to resolve this issue?
View 3 Replies View RelatedWe are trying to build HA and DR environment, combining AG and FCI. So we have 3 servers added to a cluster, 2 of them sharing the same storage and working as ACTIVE-PASSIVE cluster instance. The other server has a stand alone instance with its local storage, with the same drivers letters as the cluster instance.
Between the Active FCI and the Stand Alone, we set up an Availability Group. They are running fine, except by the listener. When the stand alone instance owns the Primary Replica, I am able to access the SQL Server instance by the listener, but when the Primary Replica is owned by the FCI, I can't reach the database by the listener (name or IP).
I've opened the same ports in both servers, it hasn't worked though.
I think theres something I'm missing about AG listeners. My test config is 1 SharePoint WFE & 2 SQL servers configured in an AAG.WFE, SQL1 & SQL2 servers are all on the same subnet.On the WFE, I configured an alias called SP15 to be used for the SQL servers. If I failover from SQL1 to SQL2 I just need to change where the alias is pointing on the WFE. So why do I need a listener? This works fine, albeit manually.I have read on some posts that an automatic failover process is possible. How can I add a 2nd IP address to the listener when both SQL servers are on the same subnet? The GUI doesn't seem to allow this.
View 5 Replies View RelatedI have a two node HA Always on group using a Listener. I would like to force a certain AD group to always be forced to the secondry node as they would only ever need to run select statements. If there an easy way to do this without using logon triggers?
View 6 Replies View RelatedI am setting up a new pair of SQL 2014 enterprise servers in HA using Availability Groups. One of the servers is located here in our local datacenter (10.0.1.x) and the other SQL server is in our remote datacenter(172.16.1.x). I was able to setup the Windows Failover Custer without much issue. I setup the AG but when I try to setup the listener. I get the following error. I have setup an IP for both networks on the listener. I have confirmed that there is not any DNS records created for AG listener name. But I still get this error.
View 6 Replies View RelatedEnvironment: SQL Server 2014 on Windows Server 2012 R2.
We have our availability group configured and working. However, when we try to connect to the AG listener from a remote server, we have to use the fully qualified domain name (FQDN) to connect. We'd like to be able to connect just using the host name. Interestingly, ping actually resolves the IP correctly for either.
I have getting issues when i am creating listener for always On . Error shown as below
Can not bring the Windows server fail over cluster (WSFC) resources online. (Error Code 5942). The WSFC service may not be running or may not be accessible in its currents states, or the WSFC resources may not be in a state that could accept the request.
For information about this error code see "system error code" in windows development documentation
The attempt to create network name and IP address for the listener is failed. The WSFC service may not be running or may not be accessible in its currents states or the value provide for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate network name and IP address with network administrator. (Microsoft SQL Server error 41066) ...
If I wanted to search for Jobs as a particular status (e.g. 0130) and wanted to keep the jobs at this status until it has reached 0500, 0125, or 0900 in it's subsequent status log entry, how can I write the SQL for it to achieve it?
I have the following SQL which searches for the Jobs at 0130, but don't know how to develop it further to search on the requirement above.
------ SQL -------
SELECT
job.job_number,
(SELECT MAX(jsl.job_log_number)
FROM job_status_log jsl
WHERE
job.job_number = jsl.job_number AND
jsl.status_code = '0130') as Last_Early_Warning_Status_Entry
[code].....
In the job_status_log table above, there is a job_log_number field which increments by 1 when there is a new status log entry.
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies View Relatedis bulk logged recovery model support point in time recovery
View 9 Replies View RelatedPages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies View Relatedin the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies View RelatedWe have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
I have had an underwhelming amount of success hunting down the sourceof this error and am hoping that someone here may have some insight.Error logged in the event log:Source: MSSQLSERVERCategory: (2)EVENT ID: 17887Description: IO Completion Listener (0x754) Worker 0x00FEC0E8 appearsto be non-yielding on Node 1. Approx CPU Used: kernel 0 ms, user 0 ms,Interval: 15187.Immediately followed by 100% CPU utilization. The server remains ping-able and I can telnet to the SQL port, but it is otherwise effectivelyunresponsive (queries timeout, RDP times out, etc.). This is alsologged in the SQL error log:2008-03-19 15:52:37.80 Server Using 'dbghelp.dll' version '4.0.5'2008-03-19 15:52:46.80 Server **Dump thread - spid = 0, PSS =0x00000000, EC = 0x000000002008-03-19 15:52:46.80 Server ***Stack Dump being sent to D:Microsoft SQL ServerMSSQL.3MSSQLLOGSQLDump0004.txt2008-03-19 15:52:46.80 Server *************************************************** *****************************2008-03-19 15:52:46.80 Server *2008-03-19 15:52:46.80 Server * BEGIN STACK DUMP:2008-03-19 15:52:46.80 Server * 03/19/08 15:52:46 spid 02008-03-19 15:52:46.80 Server *2008-03-19 15:52:46.80 Server * Non-yielding IOCP Listener2008-03-19 15:52:46.80 Server *2008-03-19 15:52:46.80 Server *************************************************** *****************************2008-03-19 15:52:46.80 Server *-------------------------------------------------------------------------------2008-03-19 15:52:46.80 Server * Short Stack Dump2008-03-19 15:58:13.09 Server Stack Signature for the dump is0x000000062008-03-19 16:03:40.94 Server IO Completion Listener (0x730)Worker 0x00A060E8 appears to be non-yielding on Node 0. Approx CPUUsed: kernel 0 ms, user 0 ms, Interval: 15187.2008-03-19 16:06:10.47 Server Timeout waiting for external dumpprocess 6016.2008-03-19 16:06:10.47 Server IO Completion Listener (0x754)Worker 0x00FEC0E8 appears to be non-yielding on Node 1. Approx CPUUsed: kernel 0 ms, user 0 ms, Interval: 15187.2008-03-19 16:17:34.51 Server IO Completion Listener (0x754)Worker 0x00FEC0E8 appears to be non-yielding on Node 1. Approx CPUUsed: kernel 0 ms, user 0 ms, Interval: 15187.The server is Windows 2003 SP2 (32bit), dual dual-core AMD opteronprocessors, 8GB RAM, RAID 10. /3GB and /PAE are enabled in boot.ini."Lock pages in memory" has been granted to the account SQL runs as.SQL Server is 2005 Standard Edition SP1 (32bit). "Use AWE to allocatememory" is enabled. Min and max memory are set to 5GB.If there is any other info you think may be helpful introubleshooting, please let me know. Any insight you've had into thisor similar problem would be appreciated. Thanks in advance.
View 1 Replies View RelatedI am new to Service Broker and Query Notification. I've used Books Online and the other help files to successfully create a class to subscribe and listen for mods to a table on a SqlServer 2005 (SP1 applied) server. My prototype worked exactly as expected.
However, when I put my code into production, the listener was calling my NotifyEvent() callback repeatedly, and without any changes being made to the table! Of course, I'd tested with a simple two column table and implemented with a more complex multi-column one. After some experimentation I discovered that the problem occured when the SELECT statement refrenced a "blob" column.
That is, the CREATE TABLE command included a column:
[Data] [varbinary] (max) NULL
and the SELECT statement looked like:
private const string _select = "SELECT [Role_s], [User_s], [DataType], [Project_s], [DataName], [tag], [Data_s], [ScopeType], [ScopeOwner], [Data1], [Data2], [Data3], [Data4], [IsProject], [Data] FROM [ovs].[OVS_AppData_tbl] WHERE DataType='SchedTask'";
SqlServer called my NotifyEvent() continuously. If I removed the [Data] column from the select, then the code worked as I had tested. I also tried this on another table (fewer columns) that also had a [Data] defined similarly, and again the continuous notifications came. I've got a workaround because I also calculate a hash on the [Data] column, and I can "watch" the hash instead of the underlying [Data].
Oh, when I ask SSMS to script the table with the [Data] column it gives me:
[Data] [image] NULL
This may (or may) be relevant (vs. varbinary).
HiI am very new to SqlServer. I want to my java application, using JDBC,to connect to the SQLServer on port 1433 (Running on Windows NT). Howdo I configure it? I am using 2000 version of SQL Server.Thank you
View 1 Replies View RelatedHi,
I have Oracle 9i. Oracle listener is aborting by itself after every few minutes giving TNSLSNR.exe failed. While listener is running I can do all the activity on the database.
Please let me know if there is any solution.
Thanks in Advance.
Pushpam
How can one enabledisable Availability Group listener? I know AG listener can be deleted and added but didnt find anything to disable or enable that.
View 1 Replies View Related I've started working at an organization that has a sql 2005 cluster with a named instances on it, lets call it Instance1. What they done is to create a dns alias for servername that is the same as the instance name, so when you connect to the sql server you connect "Instance1Instance1".
We want to move to SQL 2014 cluster with AlwaysOn Availability Groups doing the HA/DR, the question is if I create a listener name called "Listener1" is there a way to using DNS or anything else to point "Instance1Instance1" to "Listener1"
Is it possible to password protect the listener for SQL Server - similar to Oracle?
View 2 Replies View RelatedIf you are doing a disaster recovery of an entire SQL 2005 cluster, can you just install SQL server and restore the system database to get the configuration?
View 4 Replies View RelatedI have an issue when connecting with application Intent=readonly when using Listener name. I can connect to the read only secondary with application Intent=readonly if I use the server name. It gives a host does not exist error when using listener. This happens only if I am using the application Intent keyword. I can connect for normal readwrite operation using listener name.
View 3 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedI have set up a couple of servers in a SQL 2012 AlwaysOn Availability Group (non FCI). I have also configured a Listener which enables SQL clients to connect to the server currently servicing the database, as expected.
I would also like non SQL clients to be able to connect to the server currently hosting the database so that they can run scripts sitting in a share. I don't have a shared disk so just have a directory share on each server with the same scripts in each directory.
I am able to ping and RDP to the listener IP address/name and end up on the correct server but am unable to connect to the share ListenerNameShare. Is that actually supported? If it is, any thoughts on what I need to do to get it going. If it isn't what other options do I have?
So I have Availability groups configured as well as the Availability Group Listener, what If I want to change the port that the listener is listening on, do I need to reboot the server or is it dynamic across the board ?
View 5 Replies View RelatedI am trying to setup an AG on a cluster, I was able to define where I want my replica, but I need to setup the ip for the listener of that one
When I am adding the Ip at the listener I am getting the following message:
The Windows Server Failover Clustering (WSFC) resource control API returned error code 5057. The WSFC service may not be running or may not be accessible in its current state, or the specified arguments are invalid. For information about this error code, see "System Error Codes" in the Windows Development documentation.
The attempt to create the network name and IP address for the listener failed. The WSFC service may not be running or may be inaccessible in its current state, or the values provided for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate the network name and IP address with the network administrator. (Microsoft SQL Server, Error: 41009)
Browsing around I found this guide: [URL] ......
And I make sure that the cluster has permissions to "Read all properties", "Create Computer Objects", even to "Create all child" permissions
I also added those permissions to the account that starts sql at that cluster and I am logged as that and I am still getting the error....