Recovery :: Adding Second Replica To 2012 AG / Cannot Click Next Button

Oct 21, 2015

Trying to add a second replica to my SQL 2012 AG. for some reason i cant click the next button.

View 3 Replies


ADVERTISEMENT

Recovery :: Error Adding Replica To AlwaysOn Failover Cluster?

May 22, 2015

I'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard.  When I enter the name of the target node (secondary replica) server and press connect, I get the following:   

A network-related or instance-specific error occurred while establishing a connection to SQL Server. 

The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified

The SQL Browser service is up and running on the target.  I am using an Azure VM for my SQL instance.  This cluster spans geographies from our on-premise site to Azure via a VPN.  This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03. 

[URL]

Full error:

Connect to Server
Cannot connect to ssasnodeaz03

Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server. 

The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified

View 8 Replies View Related

SQL 2012 :: Backup On Primary Replica In Case Of Secondary Replica Is Down

Jun 9, 2014

I have 2 SQL Server replicas configured on SQL Server 2012 AlwaysOn. e.g. SQL1 & SQL2.

I have configured backup job on both SQL Server with the following statement. and the job occurs every 10 minutes.

•declare @DBNAME sysname,@sqlstr varchar(500)
set @DBNAME = 'dba'
IF (sys.fn_hadr_backup_is_preferred_replica(@DBNAME)=0)
BEGIN
--Select 'This is not the preferred replica, exiting with success';

[Code] ...

I turned off SQL2 for Windows maintenance. So there is only SQL1 is online. Afterwards. I checked the backup folder and didn't see any new backup files was created after SQL2 was offline. I rerun the job. It still doesn't backup database on the Primary Replica. Then I searched on SQL Server Book online. It says

Prefer Secondary

Specifies that backups should occur on a secondary replica except when the primary replica is the only replica online. In that case, the backup should occur on the primary replica. This is the default option.

According to what it says, it should backup on the Primary Replica.

View 2 Replies View Related

SQL && C# Help On A Button Click!!!

Mar 7, 2008

Hey Guys,
I'm not sure if anyone can help me with this but I am trying to achieve the following:
I have a row (In this case it is information on a fix) and on a button click I am trying to get it to "archive" it.  At the moment I have it so that it it takes the current information and adds it to the archive table adding an archive date.  The thing that I am struggling with is incrementing the version number. So, I need it to (in these steps I think) - Look for existance of the other entires of that ID, look for the version number that is related to the newest date of those knowledgeIDs and then add 1 to it.  If that knowledgeID doesnt exist then add it as one.
My current code is below:
Thanks in Advance =)
C# Codeprotected void Page_Load(object sender, EventArgs e)
{UserName = (string)Session["UserName"];
Label4.Text = UserName + " Is Current Logged In";UserType = (string)Session["UserType"];if ((Session["UserName"] != null) & (UserType == "Helpdesk"))
{Response.Redirect("Accessrights.aspx");
}else if (Session["UserName"] == null)
{Response.Redirect("Login.aspx");
}
FixName = "default";Description = "default";File = "default";
ADate = myCalendar.TodaysDate.ToShortDateString();
AddDate = Convert.ToDateTime(ADate);myConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=C:\inetpub\wwwroot\HOF\App_Data\HOF.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True;";
}protected void Button1_Click(object sender, EventArgs e)
{SqlConnection myConnection = new SqlConnection(myConnectionString);
try
{
FixName = TextBox1.Text;
 SqlCommand myCommand = new SqlCommand("select * from Knowledge WHERE FixName like '%" + FixName + "%'", myConnection);
myConnection.Open();SqlDataReader myReader = myCommand.ExecuteReader();if (myReader.HasRows)
{while (myReader.Read())
{
TextBox1.Text = myReader["FixName"].ToString();TextBox2.Text = myReader["Description"].ToString();
File = myReader["Location"].ToString();if (File != null)
{
TextBox3.Text = File;
}
else
{TextBox3.Text = "There is no script avaliable";
}KnowledgeID = myReader["KnowledgeID"].ToString();Add = myReader["DateAdded"].ToString();
}
myConnection.Close();
}
else
{TextBox1.Text = FixName + "Does not Exist. Please try again.";
}
}catch (Exception ex)
{
myConnection.Close();
}
try
Description = TextBox2.Text;File = Convert.ToString(FileUpload1.FileName);if (CheckBox1.Checked == true)
{SAPPS = "True";
}
else
{SAPPS = "False";
}
{SqlCommand mycommand2 = new SqlCommand("INSERT INTO Knowledge (FixName, Description, Location, DateAdded, DateArchived, Version, KnowledgeID) SET ('" + FixName + "','" + Description + "','" + File + "','" + Add + "','"+AddDate+"','" + SAPPS + "','"+I NEED A VALUE HERE+"','"+KnowledgeID+"')", myConnection);SqlDataAdapter myDataAdapter = new SqlDataAdapter(mycommand2);
sa = mycommand.ExecuteNonQuery();
myConnection.Close();
}catch (Exception ex)
{
myConnection.Close();
}
}
 

View 2 Replies View Related

Click Button?

Oct 15, 2007



Hi everyone, Im using SSRS 2000 and I was wondering is there a way to create a click button??? I have 2 reports linked with hyperlinks but I wanted to make it look more presentable. So, instead of just clicking on the words, I want them to click the button.

Thanks in advance,

Abner

View 3 Replies View Related

Executing SQL With A Button Click.

Dec 25, 2007

I feel like it must be easy and I'm missing something.  Maybe I'm going the wrong way about it too.  Basically I've written an append query that needs parameters, but I have no idea how to actually execute it.  I'm coming from building apps in MS Access where all of this is really easy.  I'm really enjoying learning some things, and did my first MS SQL trigger event tonight, which worked great.  I though using a trigger may be an option here, but I need to control the "when" of this append a little more carefully and can't rely on an automated event. I can manually execute the query and it works, but have a button I could press on a form, with the queries on that form would be ideal.  I'm basically moving partial data from one table to another. Any help?  Again, this seems like it "should" be easy, but I'm not finding info on it.  Please talk slowly, as again, I'm coming from Access. 

View 5 Replies View Related

Search In Button Click

Jun 29, 2007

i have to search through differene controls (textboxes,dropdownlist,checkboxes,radiobutton) in an Asp.Net page usingC#.

can anybody tell me how to write the code of searching in button_click.

using dynamic query or stored procedure.



all replies are welcome.

Thanx in advance.

View 3 Replies View Related

How To Execute A Selectcommand On Button Click?

Jan 9, 2007

Hello friends
Can anyone tell me the means by which I can populate a label or a datagrid by executing a selectcommand statement on the form of my webpage. And what is the best way to retrieve data from a SQL datasource, is it by using separate sqldatasources for each different parts of a page that requires different data from different tables in the same database or by using a tableadapter to retrieve the data for the best performance?
Thanks for replying for my previous questions. It was helpful and great in my program implementation.
Thank you

View 1 Replies View Related

Binding A Gridview To Sqldatasource On Button Click

Mar 3, 2008

 i am using 2 textbox to search name and instituition of some students. on button click  need to display the result on gridview. but i dont get any result.. pl adviceSqlDataSource1.SelectCommand = "SELECT Sname, Address, Instituition, Role, Testgroup, Email FROM std_det WHERE (Sname LIKE '%'+@Param1+'%') AND (Instituition = 'RASET') AND (Role LIKE '%'+@Param2+'%') AND (Instituition = 'RASET')";            name.ControlID = "TextBox3";            name.DefaultValue = "%";            name.Name = "Param1";            name.PropertyName = "Text";            inst.ControlID = "TextBox4";            inst.DefaultValue = "%";            inst.Name = "Param2";            inst.PropertyName = "Text";            //SqlDataSource1.Select(DataSourceSelectArguments.Empty);            SqlDataSource1.SelectParameters.Add(name);            SqlDataSource1.SelectParameters.Add(inst);            SqlDataSource1.DataBind();            //DataView dv = (DataView)this.SqlDataSource1.Select(DataSourceSelectArguments.Empty);            GridView2.DataSourceID = "SqlDataSource1";                        GridView2.DataBind();

View 2 Replies View Related

Running A MS SQL Stored Procedure On Button Click

Mar 14, 2008

I am new to ASP.NET so please excuse what may seem like a dumb question.
I have a stored procedure that I need to run when the user clicks on our submit button.  I am using Visual Studio 2005 and thought I could use the SqlDataSOurce Control.  IS it possible to us the control or do I need to create a connection and call the stored procedure in the the button_click sub?
Thanks in advance
MF

View 6 Replies View Related

2nd INSERT INTO Statement In A Button Click Event

Mar 6, 2006

Hi everyone.I am trying to write 2 INSERT INTO statements into a Button click event. Both statements go to the same database but differnet tables. The first statement works fine but the 2nd causes an error with the Try, Catch, Finally statement. When I remove the ExecuteNonQuery from the 2nd statement, the 2nd INSERT INTO statement fails to work. Any help would be brilliant. Thanks!
Private Sub btnInsertChange_Click(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Handles btnInsertChange.Command
        'Insert Guide changes into ChangesReport table in sql server        Me.SqlCommandThemeTest.Connection = Me.SqlConnection1
        Dim Name As String        Dim values As String        Dim sSQL As String        Name = "Theme, Guide, GuidePage, PageType, ChangeCategory, ChangeFrom, ChangeFromText, ChangeTo, ChangeToText ContentManager"        values = "lstTheme, lstGuideName, lstGuidePage, lstPageType, lstChangeCategory, lstChangeFrom, txtChangeFrom, lstChangeTo, txtChangeTo, Label1"        SqlCommandThemeTest.CommandText = "INSERT INTO dbo.ChangesReport (Theme, Guide, GuidePage, PageType, ChangeCategory, ChangeFrom, ChangeFromText, ChangeTo, ChangeToText, ContentManager) VALUES (@themeValue, @guideValue, @guidepageValue, @pagetypeValue, @changecategoryValue, @changefromValue, @changefromtextValue, @changetoValue, @changetotextValue, @contentmanagerValue)"
        SqlCommandThemeTest.Parameters.Add("@themeValue", lstTheme.SelectedItem.Text)        SqlCommandThemeTest.Parameters.Add("@guideValue", lstGuideName.SelectedItem.Text)        SqlCommandThemeTest.Parameters.Add("@guidepageValue", lstGuidePage.SelectedItem.Text)        SqlCommandThemeTest.Parameters.Add("@pagetypeValue", lstPageType.SelectedItem.Text)        SqlCommandThemeTest.Parameters.Add("@changecategoryValue", lstChangeCategory.SelectedItem.Text)        SqlCommandThemeTest.Parameters.Add("@changefromValue", lstChangeFrom.SelectedItem.Text)        SqlCommandThemeTest.Parameters.Add("@changefromtextValue", txtChangeFrom.Text)        SqlCommandThemeTest.Parameters.Add("@changetoValue", lstChangeTo.SelectedItem.Text)        SqlCommandThemeTest.Parameters.Add("@changetotextValue", txtChangeTo.Text)        SqlCommandThemeTest.Parameters.Add("@contentmanagerValue", Label1.Text)
        Try            Me.SqlConnection1.Open()            Me.SqlCommandThemeTest.ExecuteNonQuery()        Catch ex As Exception            Response.Write(ex.ToString)        Finally            Me.SqlConnection1.Close()        End Try
        'Insert textbox to ChangeLogFrom ddl        Me.CmdDDLFromUpdate.Connection = Me.SqlConnection1
        Name = "ChangeFromText"        values = "txtChangeFrom"        sSQL = "INSERT INTO dbo.Change Log From (ChangeLogFrom) VALUES (@changelogfromValue)"        Me.CmdDDLFromUpdate.Parameters.Add("@changelogfromValue", txtChangeFrom.Text)
Try            Me.SqlConnection1.Open()            Me.CmdDDLFromUpdate.ExecuteNonQuery()        Catch ex As Exception            Response.Write(ex.ToString)        Finally            Me.SqlConnection1.Close()        End Try

View 3 Replies View Related

Machine Restart On Print Button Click

Jan 28, 2008

i am using Asp.net , C# , sql server 2005.
i made one rdl report and called it from server (win2003). it worked successfully . but when i give print for the same report(through reportviewer control print option). Client machine restart. Same thing happened on four machine that were in win2000.

Please guide me.

View 2 Replies View Related

Creating Graphs In Access On A Click Of A Button

Aug 3, 2006

I need to create graphs in access in a lick of a button all the data will be in the sql transfered from the access.

If anybody did this before ar having Idea please let me know

View 4 Replies View Related

What To Get The Confirm Msg On Button Click Event Stored Data...

Apr 1, 2007

How can i confirm that the data entered within the standard controls and after the click event for the particular sql query the data is been stored in the database tables (depending insert,update,delete).I want to display the different messages on the click event and that after the changes made into the tables.How can i do it ?? I m using ASP.Net with C#,VB and the sql server to store data.I also want to know where are the database tables exactly get stored which are made in the Microsoft SQL Server Management Studio Express.I want to use as the existing item in .Net but could not find.. Thanxs... 

View 2 Replies View Related

Running Multiple Commands On Single Button Click

Feb 21, 2008

I have a form that contains data that some of which needs to be inserted into one table and the rest updated to another table. I want this to happen on a single button click. Is this possible?Here's what I have so far:            String id = parm_tb_tktid.Text;            String update = parm_tb_desc.Text;            String status = parm_cb_status.Text;                     SqlCommand cmd = new SqlCommand("Insert into History (tkt_id, hist_desc) values(@parm_tb_tktid, @parm_tb_desc)", HelpdeskConnectionString);            cmd.CommandType = CommandType.Text;            cmd.Parameters.AddWithValue("@parm_tb_tktid", id);            cmd.Parameters.AddWithValue("@parm_tb_desc", update);                        SqlCommand cmd1 = new SqlCommand("Update Ticket (tkt_status) values(@parm_cb_status) where tkt_id = @parm_tb_tktid)", HelpdeskConnectionString);            cmd1.CommandType = CommandType.Text;            cmd1.Parameters.AddWithValue("@parm_cb_status", status);            HelpdeskConnectionString.Open();            cmd.ExecuteNonQuery();            cmd1.ExecuteNonQuery();            HelpdeskConnectionString.Close();            parm_tb_tktid.Text = String.Empty;            parm_tb_desc.Text = String.Empty;            parm_cb_status.Text = String.Empty;I know it isn't right, but I can't find any info on why it's wrong and how to code it properly.  

View 9 Replies View Related

How To: Send Time To Database Table On Button Click

Mar 21, 2008

Hello, I need to know how I can make a button on my page send the Time of Click, to a table in a database, and repeat this everytime the button is clicked. Thanks for any guidance on this matter 

View 9 Replies View Related

Running An SSIS Package After A Webpage Button Click

Jun 12, 2007

Hi all!
I'm a newbie when it comes to SSIS and web development (I'm currently in school for Mechanical Engineering). I'm trying to develop a website in which I can upload an excel file and have the contents written to a SQL database. I have been successful in creating a package in which I point to an excel file and it writes the contents to the desired database. With this, I was hoping that I can modify my website to take the file which is being uploaded, change the name, and then have the SSIS package run, in which it will look for the named file in a certain directory and upload the contents to the SQL server.

Ideally this would be the order of events:

User selects and uploads a file to the server (button click)
Server renames it and places it in a certain directory
SSIS package runs and extracts the data to SQL database


Thanks all!
Shrey

View 5 Replies View Related

Button Click Event Fires While Refresing The Page

Aug 9, 2007

Hi!

I have written some code to insert a record into the table in BtnAdd click event and I also have a Grid view control to show the table records.

If I click the Add button ,the record gets inserted into the table and shown in the grid correspondingly.But if I refresh teh page,the same data gets inserted again since it fires the Btnclick Event.

Please help me out in this issue.
Thanks

View 1 Replies View Related

Why Is This SQL UPDATE Query Not Updating When This Code Is Used Under Button.click.

Mar 20, 2008

Why is this SQL UPDATE query not updating when this code is used under button.click.

Dim ListingID As String = Request.QueryString("id").ToString
Dim sqlupdate As String = "UPDATE Listings SET PlaceName = '" & PlaceName.Text & "', Location = '" & Location.SelectedValue & "', PropertyType = '" & PropertyType.SelectedValue & "', Description = '" & Description.Text & "', Price = '" & Price.Text & "' WHERE ListingID ='" & ListingID & "'"
Dim con As New SqlConnection(ListingConnection)
Dim cmd As New SqlCommand(sqlupdate, con)
con.Open()
cmd.ExecuteNonQuery()
con.Close()

View 12 Replies View Related

Theres A Syntax Error When I Click On Login Button After Writng The Codes

Feb 1, 2008

 the line in bold..can sumone tell me how to correct the error , it say syntax error beside "="
Imports System.Data
Imports System.Data.SqlClient

Partial Class Default3
    Inherits System.Web.UI.Page

    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

    End Sub

    Protected Sub btnlogin_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnlogin.Click
        Dim conn As New SqlConnection _
                      
("data source =YOUR-KEGKZI6IFCSQLEXPRESS; integrated security=true;"
& _
                      
"initial catalog=LOGINPAGE")
        conn.Open()

        Dim cmdLogin As New
SqlCommand("select * from UserName where ='" & txtusername.Text
& "' and Password='" & txtpassword.Text & "'", conn)
        Dim dr As SqlDataReader
        dr =cmdLogin.ExecuteReader()


        If dr.Read() Then

            Response.Redirect("Galery.aspx")
        Else
            Response.Redirect("homepage.aspx")

        End If

View 1 Replies View Related

System Restarts On Click Of The Print Button While Viewing Reports In The Browser

Apr 17, 2007

We are using Reporting Services 2000.

The print button that is present in the browser is working just fine for some users.



But some users are complaining that on clicking the print button their system restarts.



Some other users are also getting the error "An error occurred during printing. (0x80004005)"

However on closing the browser and opening the report in it again this issue is resolved.



So, the main concern is "Restart of the machine on click of the PRINT icon in reports viewed in some application browser."



Please help!!

View 2 Replies View Related

SQL 2012 :: Existing Replica MDF File Size Increased In Size Than New Replica Install

Apr 14, 2015

Here are my scenarios:

We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.

1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.

2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.

3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.

Why it is allocating the space differently? This is effecting our initial replica set up times.

View 0 Replies View Related

Sqlcommand And Visual Studio Net 2003 Code To Update A Record With A Click Of Button.

Sep 1, 2006

Hello to everyone,  I have this problem If I use this code when I try to update a record in my sql database It does not do anything. This is the code.  Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click        Dim myconn As New SqlConnection("Data Source=.;Initial Catalog=SistemaIntegral; user id=sa")        Dim mycmd As New SqlCommand("presup", myconn)        mycmd.CommandType = CommandType.StoredProceduremycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.textmycmd.parameters.Add(New SqlParameters("@txtForig", SqlDbtype.varchar,50)).Value=txtFOrig.textmycmd.parameters.Add(New SqlParameters("@txtFmod", SqlDbtype.varchar,50)).Value=txtFmod.textmycmd.parameters.Add(New SqlParameters("@txtFeje", SqlDbtype.varchar,50)).Value=txtFeje.textmycmd.parameters.Add(New SqlParameters("@txtPorig", SqlDbtype.varchar,50)).Value=txtPorig.textmycmd.parameters.Add(New SqlParameters("@txPmod", SqlDbtype.varchar,50)).Value=txtPmod.textmycmd.parameters.Add(New SqlParameters("@txtPeje", SqlDbtype.varchar,50)).Value=txtPeje.text mycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.text        myconn.Open()        mycmd.ExecuteNonQuery()        myconn.Close()        mycmd.Dispose()        myconn.Dispose()    End Sub  This is the code for the procedure called "presup" in SQL 2000 Server.CREATE PROCEDURE [presup](@txtClave [int],@txtForig [varchar](50),@txtFmod [varchar](50),@txtFeje [varchar](50),@txtPorig [varchar](50),@txtPmod [varchar](50),@txtPeje [varchar](50),@txtIdPresupuesto [int])as Update [Presupuesto]Set [IdClave]=@txtClave,[orig]=@txtForig,[moda]=@txtFmod,[ejer]=@txtFEje,[origr]=@txtPorig,[modar]=@txtPmod,[ejerr]=@txtPejeWhere ([IdPresupuesto]=@txtIdPresupuesto)GO When I click the Update button of my webform it does not do anything. Please Help me I am new to Visual Studio.Net 2003. (2 weeks ago I started using Visual Studio) 

View 1 Replies View Related

Error: Button Click Is Undefined - Simple If Statement With Sql Command Wont Work (c#)

Feb 2, 2008

hello it seems lack of c# skills is getting the better of me here...iv been trying to get this to work for hours now without success. I have just started working in c# so i am a beginner :)
all i want to do it query the database, check to see if a title exists, if yes then populate textbox saying 'title in use' but if the title doesnt exists then continue executing rest of code to add the title.
You'll notice iv tried to use string variables and sqlDataAdapter but i cant get these to work either...please help
so far i have this that keeps giving me the error that my button click is undefined: protected void bookButton_Click(object sender, EventArgs e){
//string title;try{SqlConnection conn1 = new SqlConnection();
conn1.ConnectionString =
"Data Source=Gemma-PC\SQLEXPRESS;" +"Initial Catalog=SoSym;" +
"Integrated Security=SSPI;";SqlCommand findTitle = new SqlCommand("SELECT title FROM Publication WHERE title='" + titleTextBox.Text + "';", conn1);
 
conn1.Open();
findTitle.ExecuteNonQuery();
 /*
DataSet myDataSetTitle = new DataSet("PublicationTitle");
myDataSetTitle.Clear();
myDataAdapterTitle.Fill(myDataSetTitle);//myDataSet contains results from above SELECT statement
title = myDataSetTitle.Tables[0].Rows[0]["title"].ToString();*/
}catch(Exception ex)
{TitleInvalidMessage.Text = "Title Not Accepted: This title is already in use by another publication" +ex.Message;
}
//title does not exist in table so continue and add to database
//rest of code here

View 5 Replies View Related

Recovery :: Replica Server Not Available

Aug 11, 2015

I'm new to Sql Server and want to install SQL server alwayson clustering on my test environment. I followed the steps by this site: [URL] ....

On each node I can connect to SQL Server but why my 2nd node is not available so that I can add it as my 2ndary Replica?

According to this site, till "Always-On Availability Group Configuration" everything was successful.

View 6 Replies View Related

Recovery :: Active Second Replica Shared DB Not Accessible

Apr 27, 2015

I have Active Active Cluster with 2 nodes , on the first node I can execute the queries, but when I trying to execute query or just open a DB to see the tables I getting error:"The Database XX is not accessible. (ObjectExplorer)".

View 5 Replies View Related

Recovery :: Set Synchronization Time From Primary To Secondary Replica

Sep 28, 2015

As per our client requirement we want to set synchronization time from primary replica to secondary replica after 20 minutes. Is it possible in MSSQL AlwaysOn Availability Groups in SQL Server 2012?

View 6 Replies View Related

Recovery :: Which Replica Becomes Primary When Availability Group Fails Over

Jul 16, 2015

I have 3 synchronous AlwaysON replicas: A, B and C. A is primary, B and C are secondary and both are set to Automatic recovery. How can I understand, which of them (B or C) will become primary when A goes offline? Well, Actually my final DB system should support following configuration:

1) Normally - A is primary B and C are sync secondary.
2) if A fails, B automatically becomes primary, C remains Sync secondary.
3) if A goes online, it becomes primary again 
4) C becomes primary only after A and B fail (and there still should be cluster quorum!)

As I understood, first of all i should configure quorum the following way: A-0, B-1, C-1, folder-witness-1.

The problem, again, is: I cannot understand how to configure which replica becomes primary when AG fails over.

View 3 Replies View Related

Reporting Services :: Cannot Click Restore Button In RS Configuration Manager To Restore Encryption Key

Oct 29, 2015

While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?

View 2 Replies View Related

SQL Server 2008 :: Click On ADD Button To Connect To Secondary Server

Feb 27, 2015

I am configuring log shipping. On the secondary server, I already restored the DB.From the primary server, I was following all the instructions on how to. Now this is the problem. I click on ADD button to connect to the secondary server. I put in the IPInstanceName and the DB. I also chose option 3 (No, the secondary database is initialized), clicked OK after all the option, now getting this error.

View 9 Replies View Related

Double Click On The View Report Button To Get The Report To Render.

Jul 26, 2007

I've got a SQL Reporting Server 2000 SP2 report that takes 3 parameters. FromDT, ToDT, and LocationCD. The first two parameters are free form text fields that expect a date. The last one is a drop down box. For some reason, when I'm viewing the report through the standard reports folder on the report server I have to click the "View Report" button two times to get the report to render. Clicking it just once, doesn't seem to do anything. The report is a line graph.

There are default values in the FromDT and ToDT parameter fields.

Anyone have any ideas what would be causing the need for the second click?

View 2 Replies View Related

SQL Server Admin 2014 :: How To Exit From Initializing / Recovery Pending Database In Secondary Replica

Sep 12, 2015

We have 2 switch between primary and secondary this morning.

after that one database in secondary went to "initializing / recovery pending".

How can i exit from this situation ?

View 3 Replies View Related

Adding Button In Report

Apr 27, 2007

I would like to know whether there is any way to add a button in report. I have 3 report parameters. On clicking the button, the current values of the reports are to be obtained and saved in database i.e saving the report configuration. I will use this saved configuration to form the url and view report directly.



Thanks,

Pradeep

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved