I cancelled an INSERT operation on a database. Now I get:
"Recovery of database 'BounceRepository' (6) is 0% complete (approximately 2024654 more seconds)"
That is another 23 days of straight recover time!!! The original INSERT only ran for about 30 hours.
In Windows Performance Monitor, I can see that the system isn't disk or CPU limited. What is the server doing? How can I make it go faster?
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies View RelatedWe have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
I have an SQL code below which removes weekends and non working days when calculating days difference between two dates:
ce.enquiry_time represents when the enquiry was logged
(DATEDIFF(dd, ce.enquiry_time, getdate()) + 1)
-(DATEDIFF(wk, ce.enquiry_time, getdate()) * 2)
-(CASE WHEN DATENAME(dw, ce.enquiry_time) = 'Sunday' THEN 1 ELSE 0 END)
-(CASE WHEN DATENAME(dw, getdate()) = 'Saturday' THEN 1 ELSE 0 END)
-(SELECT COUNT(*) FROM nonworking_day WHERE nonworking_day.nonworking_date >= ce.enquiry_time AND nonworking_day.nonworking_date < dateadd(dd,datediff(dd,0,getdate()),1))
It works but I don't understand how it works it out. I am having issues understanding each coloured piece of code and how it works together.
Hello,I am writing a query to select records added to a table today, in the last 3 days, in the last 7 days, and so on.Here is what I have (which seems that its not working exactly). -- total listed today
SELECT COUNT (*) FROM mytable WHERE DATEDIFF(Day, mydatecolumn, getdate() ) <= 0-- total listed yesterday
SELECT COUNT (*) FROM mytable WHERE DATEDIFF(Day, mydatecolumn, getdate() ) <= 1-- total listed in the last 3 days
SELECT COUNT (*) FROM mytable WHERE DATEDIFF(Day, mydatecolumn, getdate() ) <= 3I'd like to be able to select the count for records added within the last X number of days. Can someone please help me out? Thanks so much in advance.
I have a SQL Server 2K db with some 10 tables and I want to setup a nightly job to truncate all db records which are more than 15 days old. Can anyone provide me with steps involved? Any help will be highly appreciated.
View 3 Replies View RelatedLast week I backed up my SQL Server by using BE 2012. I named the file "SQL Server BAK" which contained copies of my SQL Server databases. A few days ago I lost some part of my data due to accidental deletion. I backed it up, so I tried to restore the database from the .bkf file. The problem comes here, when I try to to restore my .bkf file, it becomes inaccessible.what causes this?
View 7 Replies View RelatedI have a database with 2 almost identical tables.
Each one is about 1.2 Billion rows, 0.5 Tb each.
I've truncated one of them and started SHRINK DB WITH REORGANIZE PAGES
It is running already for 3 days.
When should I start to worry :)
Thank you in advance
Hello to all members.
I am using SQL Server 2005 std edition 32 bit
The database is configured in compatibility mode to sql server 2000
The backup mode for the database is configured as simple
With SQL Server Agent I am running schedule task of the backup script
The question is:
I would like to save only the last 7 days in repository.
This means that when the 8th days has become then the 1st day backup is deleted.
in the 9th day the 2nd day backup file is deleted.
and so on
I am using the the T-SQL BACKUP DATABASE command with the following arguments:
RETAINDAYS = 7
NOFORMAT
NOINIT
SKIP
I am in situation that the command above only append to the backup file and without deleting the expired backup days.
What I need to change in the parameters that the script will delete the expired backup days.
Thanking in advance everyone who assist.
Hello to all members.
I am using SQL Server 2005 std edition 32 bit
The database is configured in compatibility mode to sql server 2000
The backup mode for the database is configured as simple
With SQL Server Agent I am running schedule task of the backup script
The question is:
I would like to save only the last 7 days in repository.
This means that when the 8th days has become then the 1st day backup is deleted.
in the 9th day the 2nd day backup file is deleted.
and so on
I am using the the T-SQL BACKUP DATABASE command with the following arguments:
RETAINDAYS = 7
NOFORMAT
NOINIT
SKIP
I am in situation that the command above only append to the backup file and without deleting the expired backup days.
What I need to change in the parameters that the script will delete the expired backup days.
It is too much work when working with Database Maintenance Wizard.
lets take a scenario that I have 10 database.
I would like that each database will backup into seperate file.
I need to create 10 * 7 Maintenance plans.
I have created a directory with the name SDBbackup.
Now under the directory SDBbackup I have created 7 directories (1,2,3,4,5,6,7).
Each directory is for Sunday=1 , Monday=2 , and etc.
It's very much work if I need to accomplish it with Database Maintenance Wizard.
This is why I am asking a specific question regarding T-SQL.
Thanking in advance everyone who assist.
Running SQL version 7 on "Terminal" Server I have a database marked in Load Receovery and we are unable to get to it. We tried MS SQL document on how to but we are still unable to recover it!
View 4 Replies View Relatedhai!
i have a database which crashed recently(26th sep 2007).my last backup is on 14 sep 2007.i have restored database after two days.Now i have a database (old) with data upto 14sep 2007 and from 26sep to till date.(data from 14sep to 26sep missing).I restored database on 28th with a new database name which has data upto 26th sep 2007.how to attach these two databases to a single database to have data from beginning to tilldate.
please help in this regard.
Hi,
I made an UPDATE query without specifying any criteria so I had more than 1500 records have been changed and I cannot undo the UPDATE.
Is there any way I can recover the data UPDATE from the Transactions Log.
I did not back up the database lately so what is the appropriate solutions for this?
Any thoughts… :S
Hi,
Is there a way to Revover a Sql Server 2000 database in the absence of the backup file(the backup file got overwritten). Does Sql Server do any automatic Transaction logging?
Thanks for any input
Hai friends....
SQL Server 2005 Database, So I want to know about Database Backup and Pointing Recovery concepts..so can u please help me and any send me related documents...
---
Thanks,
Nageswar.V
New Horizons Cybersoft Ltd
+919848854114 : nageswar@nhclindia.com
Hi,I'm no where close to a SQL Server expert but we're using it as a back endto another application.I lost a PC that had MS SQL Server 2000. I was able to recover the .MDF and..LDF files but nothing else. How can I restore these files to another SQLServer installation on another PC. When I tried to attach them they are notrecognized as valid files (I get the red X instead of the green CHECK).Is this a basic security function that I'm not going to get around or shouldit be possible? Do the .mdf and .ldf files contain specific info about whatPC they were created on?Are there third party apps that might be able to at least extract thetables?Thanks,WH
View 1 Replies View RelatedHi all
When I restart server my database apear as database(In recovery )
what's ???
thanks
Hello all,
Is there a way to check the status of a database in recovery. Like how far along it may be. If not is there a way to stop a database in recovery and just drop it.
Thanks in advance,
Mike
Our server ran out of disk space during a stored procedure process. We were able to free up some space, stopped all SQL services, restarted all SQL services and now SQL Management Studio shows the database to be in recovery. Is there a way to monitor this to ensure progress is being made and to estimate when it might complete?
What does it actually mean when the database is in recovery? My database has been in recovery overnight. What is normally going on in this situation. Should I wait or take more drastic action?
View 10 Replies View RelatedHi all,
I had to change the path of .mdf and .ldf files, so I decided to:
1) Take offline the database
2) run the quey ALTER DATABASE... MODIFY to change the path
3) Bring online the database.
The last step hung up (with no errors) and left the database In Recovery.
When I tried to stop and restart sql server other databases changed their status In Recovery...
Here is a dump of Errorlog files
2007-08-26 18:13:29.28 spid24s Starting up database 'DbOrdini'.
...
...
2007-08-26 18:13:30.09 spid24s * BEGIN STACK DUMP:
2007-08-26 18:13:30.09 spid24s * 08/26/07 18:13:30 spid 24
2007-08-26 18:13:30.09 spid24s *
2007-08-26 18:13:30.09 spid24s * Location: "logmgr.cpp":5334
2007-08-26 18:13:30.09 spid24s * Expression: !(minLSN.m_fSeqNo < lfcb->lfcb_fSeqNo)
2007-08-26 18:13:30.09 spid24s * SPID: 24
2007-08-26 18:13:30.09 spid24s * Process ID: 1380
.....
.....
2007-08-26 18:13:30.40 spid24s Error: 17066, Severity: 16, State: 1.
2007-08-26 18:13:30.40 spid24s SQL Server Assertion: File: <"logmgr.cpp">, line=5334 Failed Assertion = '!(minLSN.m_fSeqNo < lfcb->lfcb_fSeqNo)'. This error may be timing-related. If the error persists after rerunning the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
2007-08-26 18:13:30.40 spid24s Error: 3624, Severity: 20, State: 1.
2007-08-26 18:13:30.40 spid24s A system assertion check has failed. Check the SQL Server error log for details
Could it be dangerous trying to kill this process ? If not, what is the best way do to it ? From Sql Server Activity Monitor (spid 24) or from Task Manager ?
Thanks in advance
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies View RelatedHi everyone,
I am trying to implement a plan for a SQL7 database that is used by the company I work for. Having read the SQL manuals I have come to the following conclusion:
I want to do a complete backup of the database at midnight and do a transaction log backup every 30 minutes between 7am and 7pm. I am hoping this will allow me to 'undo' any user mistakes and roll back the database changes to the last transaction log backup.
The questions I have are:
1) By backing up the transaction log every 30 minutes, will this then give me the ability to 'roll back' the database to the last time the transaction log was backed up (i.e. 30 minutes max) ?
2) How do I load the transaction log back in ? (i.e roll the database changes back). A simple Restore operation (with truncate ???)
3)Am I totally confused or on the right track ?
Thanks,
Tim
Hi I'm a newbie with a problem.
SQL Server 6.5 SP4. Have had problems today with SQL Server running out of LOCKS. We increased these & all seemed fine. LOCKS ranout again & we brought SQL Server back up our major database started a recovery. I know the spid of the recovery from the SQL Server errorlog but when I select the sysprocesses table I don't find an entry for this spid. The recovery has been running for about 2 hours. My question is should I see the spid of the recovery process in the sysprocesses table & is 2 hours long for a recovery of a 5 GB database?
Thanks for any help in advance.
Cheers,
Phil
Just curious, Has anyone had to do a full recovery and have it take 20+ hours?? If anyone can give me their average times for full recovery and database size, I would appreciate it. I'm researching this topic. Thanks.
View 3 Replies View RelatedHi All,
I've recently restored one of my development databases from it's production backup. The restore completed successfully, users were able to connect to the database without any problems. However, when I checked the error log I found the following message:
Bypassing recovery for database 'Test' because it is marked IN LOAD.
I could not find anything on the web or in BOL. Any ideas?
Thanks.
hi
i was deleted a record from my database, but i want to recover my deleted record via log file, how to do ?
thanks
MS SQL-Server 7.0Bypassing recovery for database 'EfW_765' because it is marked IN LOAD.What does this mean?Our customer is backing up is maindatabase and is recovering it to thisdatabase for testing.Our custumer tries it serveral times and then the recovery works and thedata are corrupt.I have written a little programm which does some selects to this database.The program is stopped during recovery but our customer beleves that thishas something to do with our program.http://support.microsoft.com/defaul...kb;en-us;272683This article doesnt halp me much. So hwat is the meaning of IN LOAD and whatdoes the server do if it bypasses the recovery.THXJens
View 2 Replies View Relatedi've a task to creating ER diagram to stream database.can i have the sample diagram. should i provide you the structure of database.
View 2 Replies View RelatedHi,
If we delete a Database accidentally (no backup exists), Is it possible to recover. How?
Thanks
ven--
is bulk logged recovery model support point in time recovery
View 9 Replies View Relatedin the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.Â
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
We have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies View Related