Recovery :: Service Pack Installation In Failover Cluster?
May 9, 2015
I want to install service pack 3 to my SQL Server 2012 Enterprise running on windows server 2008 R2 Enterprise fail over cluster, I read about the SP installation in technet, its mentioned that the passive node should be patched first and to do this the passive node should be removed from the cluster, I need to know whether I should completely remove the node from windows cluster or remove the node by using SQL Server installer and install the service pack and then add it back to the cluster, Can I do this by pausing the node in cluster and perform the service pack installation ?
Do any one has a step by step instructions for installing the service pack 2 and 3 on Active/Passive cluster. I installed sqlserver 7.0 in one active/ passive cluster and it worked successfully. Now I followed the instructions as given by microsoft by running the cluster wizard. It removed the virtual server. I made all sqlservr services offline.
When I try installing I couldn't able to install as it is saying "Active virtual server is there run clustered wizard in all the nodes". Now I am in the middle of no where.
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
I am using SQL 2012 SE with clustering on Windows server 2008 R2. Now I want migrate it to windows server 2012 with minimal down time. So I want to evict the passive node and add a new node with windows server 2012 and install sql server 2012 SE on the new passive node and perform a failover(make the node with 2012 OS as active) and then evict the new passive node and add another node with windows 2012 and then do the same thing?
I'm getting the following error when I go to create a cluster in the Failover Cluster Manager in Windows Server 2008.
"The address 10.10.10.111 is not valid for its associated network"
I'm following the instruction in the book for the 70-462 exam. There was a step that had me create a DNS A record for the address sql-cluster.contoso.com. The IP address was mapped to 10.10.10.111. I'm not sure if this is the culprit but its the only time I used that IP address in the setup.
Below are 2 screenshots. The first screenshot is the error. The second screenshot is my DNS console.
I saw following point on Technet article about RBS.The local FILESTREAM provider is supported only when it is used on local hard disk drives or an attached Internet Small Computer System Interface (iSCSI) device. You cannot use the local RBS FILESTREAM provider on remote storage devices such as network attached storage (NAS).It looks like that we cannot use FILESTREAM on Failover Cluster because to setup Failover Cluster we need to have NAS. But then the NAS is made available locally for Failover Cluster so FILESTREAM should work right?Found another article which talks about setting up FILESTREAM on Failover Cluster. URL...
The main objective is to have a third party program operate on a failover cluster. The OS is Windows Server 2012 Datacenter loaded on 2 nodes. A virtual node exists along with supporting disks. This client software uses a SQL Server database. SQL Server 2012 Enterprise is installed and operating in a failover environment. However the client software is not failing over. If the connection to node A is lost, SQL Server fails over to node B. But the client application does not.
What needs to occur in order to associate the client software with the failover cluster? This software has 6 services total installed. Some are referred to as servers - looks like to communicate between remote client computers and the database. What is the process to associate the client software with the failover?
we have to build high availability SQL 2012 cluster for VDI and we have two options. One option is to build a server cluster with combination of failover and mirroring and other option is to build failover cluster with AlwaysOn.We are not sure which option to chose. We have contacted Microsoft support to provide us some documents and instructions for failovermirroring combination but they have send us instructions for AlwaysOn option.
What would be best way to build high availability cluster for VDI? Also, since first option is very complicated.
I'm getting an error adding Replica to SQL AlwaysOn failover cluster in the new availability group wizard. When I enter the name of the target node (secondary replica) server and press connect, I get the following:
A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
The SQL Browser service is up and running on the target. I am using an Azure VM for my SQL instance. This cluster spans geographies from our on-premise site to Azure via a VPN. This is a multi-subnet cluster. I'm attempting to create a new AG from the primary replica node and the target is a node on Azure called SSASNodeAz03.
[URL]
Full error:
Connect to Server Cannot connect to ssasnodeaz03
Additional information: A network-related or instance-specific error occurred while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2) The system cannot fine the file specified
I noticed in installing a SQL2005 failover cluster instance,that it is not necessary to install on both servers. Installing on the primary node automagically installs to the secondary node. Does this constitute a COMPLETE install? It all seems to work. BUT this process does not intall client pieces (SSMS, for instance) on the secondary node. If you want that stuff there, do you then go to that box and just do a client install?
Server : Windows server 2008 DB Server : SQL Server 2008 (SP1)
Here are the series of events which happened.
1.) Event ID: 1135 Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
2.) Event ID: 1049 Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network. Please ensure all IP addresses are unique.
3.) Event ID: 1069 Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
4.) Event ID: 1049 Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network. Please ensure all IP addresses are unique.
5.) Event ID: 1069 Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
6.) Event ID: 1066 Cluster disk resource 'Cluster Disk 25' indicates corruption for volume '?Volume{88552e6f-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 25_Disk16Part1.log'. Chkdsk may also write information to the Application Event Log.
7.) Event ID : 1066 Cluster disk resource 'Cluster Disk 26' indicates corruption for volume '?Volume{88552e05-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 26_Disk4Part1.log'. Chkdsk may also write information to the Application Event Log.
8.) Event ID: 1049 (Same message as point 2)
9.) Event ID: 1069 (Same message as point 3)
10.) Event ID : 1049 (same message as point 4)
11.) Event ID :1069 (same message as point 5)
12.) Event ID :1205 The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
13.) Event ID: 1069 Cluster resource 'Cluster Disk 17' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
14.) Event D : 1049 (same message as point 2)
15.) Event ID: 1069 Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
16.) Event ID : 1205 The Cluster service failed to bring clustered service or application 'SQL Server (MSSQLSERVER)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
first of all,I went through all the logs, and could not find the reason for fail-over initialization. There should be some thing logged why the failover happened? secondly after failover the service was not coming online due to duplicate IP address detection.
Later when we try to manually bring the service online from cluster management it comes online successfully. I don't understand how would duplicate IP address get resolved when we start manually.
Lastly we see few errors related to physical disk resource between failover retries, is this could be the correlated to failover error ?
I am learning SQL Server failover cluster installation. My question is regarding the options to install failover cluster instances on the Windows Failover Cluster. I have seen ead there are two options to do so.
From the installation center, installation option-> New SQL Server installation option and afterwards add node to SQL Server failover instance.From Installation Center, Advanced option-> Failover cluster preparation and then Failover cluster completion step.What is the difference between these two options and which option to use in which scenario?
I have several installations of SQL Server with identical configurations on different computers. Is it possible to develop an unattented installation that includes SQL Server Sevice Pack, and how to do that? Thanks.
After I installed Sql Server, I ran windows update. it downloaded the service pack 1 fine, but during the installation, it just frozed at the middle, so I cancelled it, but the window froze, so I had to end process. Is my sql server messed up? I kind of tested it, and it seems to work? Is it ok if I just download SP 1 and reinstall it?
I am trying to install Service pack 5a and post SP5a patches. But how many ever times I try to, it says that the sa password is incorrect. has any one encountered this problem before? If so what needs to be done. Help appreciated.
It seems that all of a sudden my companies clients are running into problems with the installation of servicepack 5a on SQL Server 6.5 workstations. The servicepack is apparently getting to the point where it checks the master DB and then Chkmast.exe returns a value of 0 which seems to indicate that there is not enough space in the master DB for the service pack to install. I have expanded master databases well beyond the capacity where this would ever be a problem but the service pack continues to fail on chkmast.exe. What nweeds to be done to allow the service pack installation to complete?
I understand that from Sql Server 2005 service packs should be able to be applied with no disruption, is this true ?
I want to install service pack 1 on our 2005 instances but i cannot find any documentation in BOL or the official SP1 website on installation steps.
Is there no thing i need to do when i install the service pack ? I am just weary of applying a service pack to the instance while users are woking etc.
I find it very starnge that they are no reccomended steps to follow before applying th service pack. If anyone has a link to this i would really appreciate it as i cannot find ot anywhere ?
We have successfully been using MSCS with MSSQL7 (SP1) running under NT4 EE (SP6a), installed in an active/active configuration using, two DELL PowerEdge 6350 machines. Recently I installed MSSQL7 (SP2), I followed the instructions that came with SP2, and unclustered the SQL nodes using the Failover Cluster Wizard, and installed SP2, this was uneventful, and appeared to install correctly. Next I tried to recluster the SQL nodes using the Failover Cluster Wizard as directed. This failed with: "Could not run setup on remote machine. SQL Cluster Setup failed." So I began the usual research using the usual resources, and have found articles that discusses this error, and the things to look for when it happens. I have exhausted all suggestions without success. I appear to have everything correctly configured. I have enabled Cluster Logging (level 3), following are the two things I have found that indicate something is wrong:
1. In the SQL Error Log the following gets logged when I run the wizard: "Attempting to initialize Distributed Transaction Coordinator." "Failed to obtain TransactionDispenserInterface: XACT_E_TMNOTAVAILABLE"
2. In the Cluster Log I see the following message repeatedly: "[ClRtlCopySecurityDescriptor] MakeSelfRelativeSD failed, 0x00000551"
3. In the sqlclstr.log I see the following, without an indication of which file is missing: "[reghelp.h:235] : 2 (0x2): The system cannot find the file specified." "[clushelp.cpp:166] : 259 (0x103): No more data is available." "[validate.cpp:147] DeleteTestGroup:OpenClusterResource: 5007 (0x138f): The cluster resource could not be found." "~~~ XXX InstallRemote failed"
Does anyone have any ideas about what could be causing this problem? Many thanks in advance.
I am intsalling SQL 2005 in an activepassive cluster. The OS is Windows 2003 with SP1. Everything installs OK but the sql server service cannot start afterwards. There are many access errors in the Security Event log - see example below - and numerous "SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. " errors in both the SQL and Application event logs. I have tried installing SQL in both mixed mode and under Windows Authentication and get the same errors. I can install SQL 2005 outside of the cluster on both nodes. Other items of note: This was a SQL 2000 cluster. I uninstalled SQL 2K, the virtual name was changed (IP remained the same) and the DNS entry was updated to reflect the new name. Early in the installation process - 3 or 4 days ago - I got a few errors about the Server Principal Name had to be updated but when I do a setspn -l the both nodes are listed and the entries look fine, though there are no entries for the sql service (MSSQLSvc). Not sure if there should be entries for the virtual name, but there aren't any for either the old or new name. Does the new virtual name need to be added to AD? Here is the security error - Event ID is 560 and it looks like there's a problem with Remote Access and is generated when trying to access either node: Category: Object Access Type: Failure Audit Event_ID: 560 User: NT AuthorityNetwork Service Object Open: Object Server: SC Manager Object Type: SERVICE OBJECT Object Name: RemoteAccess Handle ID: - Operation ID: {0,134558507} Process ID: 1516 Image File Name: C:WINDOWSsystem32services.exe Primary User Name: CM-OHCO-DS006B$ Primary Domain: SWNA Primary Logon ID: (0x0,0x3E7) Client User Name: NETWORK SERVICE Client Domain: NT AUTHORITY Client Logon ID: (0x0,0x3E4) Accesses: Query status of service
One other informational message that may be of use - looks like there's a problem with dll's for remote access, though this isn't pertaining to SQL: The description for Event ID ( 0 ) in Source ( srmservice ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: srmservice error: 0, Started the agent (srmagent.exe)..
I heard that installing the service packs for sql 7 causes a file to be written that contains the sa password in clear text. Is this true? If so, does anyone know what the name of the file is?
I have an installation of SQL Server 2000. Both MBSA and @@versionshow this to be the gold release. When I install Service Pack 3a, itshows no error. But after restart of the server, it's still unpatched,by both MBSA and @@version.Any idea what may be going on here?
All of items of the service pack will install execpt for the Database Services.
The Details are:
"Unable to install Windows Installer MSP file"
Log Details Below
05/04/2006 08:18:42.327 ================================================================================ 05/04/2006 08:18:42.327 Hotfix package launched 05/04/2006 08:18:43.827 Product discovery successfully completed during the install process for MSSQLSERVER 05/04/2006 08:18:43.827 SP Level check successfully completed during the install process for MSSQLSERVER 05/04/2006 08:18:43.827 Product language check successfully completed during the install process for MSSQLSERVER 05/04/2006 08:18:43.827 Product version check successfully completed during the install process for MSSQLSERVER 05/04/2006 08:18:43.827 Command-line instance name check completed during the install process 05/04/2006 08:18:43.827 Baseline build check completed during the install process 05/04/2006 08:19:12.014 Attempting to install instance: MSSQLSERVER 05/04/2006 08:19:12.060 Attempting to install target: REPORTS 05/04/2006 08:19:12.076 Attempting to stop service: SQLSERVERAGENT 05/04/2006 08:19:17.154 Successfully stopped service: SQLSERVERAGENT 05/04/2006 08:19:17.154 Attempting to stop service: MSSQLServer 05/04/2006 08:19:19.154 Successfully stopped service: MSSQLServer 05/04/2006 08:19:19.154 Attempting to check for locked files: sqlrun_sql.msp 05/04/2006 08:19:19.326 Attempting to check for locked files: \REPORTSe$7d39b5ebc15c1b5ee29a229c92b3HotFixSQLFilessqlrun_sql.msp 05/04/2006 08:19:19.326 Creating MSP locked file check log at: C:WINDOWSHotfixSQL9LogsSQL9_Hotfix_KB913090_sqlrun_sql.msp.out 05/04/2006 08:19:38.029 MSP returned 1602: The user cancels installation. 05/04/2006 08:19:38.169 Successfully checked file: \REPORTSe$7d39b5ebc15c1b5ee29a229c92b3HotFixSQLFilessqlrun_sql.msp 05/04/2006 08:19:38.169 Successfully opened registry key: SystemCurrentControlSetControlSession Manager 05/04/2006 08:19:38.169 Failed to read registry key: PendingFileRenameOperations 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnxmlfilt.dll 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnThaWBrkr.dll 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnquery.dll 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnls400.dll 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnlhtml.dll 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnmsir5jp.dll 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnmsftesql.exe 05/04/2006 08:19:38.169 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnmsftepxy.dll 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnmsftefd.exe 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnmsfte.dll 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnLangWrbk.dll 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnkorwbrkr.dll 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinninfosoft.dll 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERefFTERef.dll 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnCHTBRKR.DLL 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnChsBrkr.dll 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM2005.90.2047.0 C:Program FilesMicrosoft SQL Server90COMResources1033REPLRES.rll 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM2005.90.2047.0 C:Program FilesMicrosoft SQL Server90COM eplrec.dll 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM2005.90.2047.0 C:Program FilesMicrosoft SQL Server90COM plisapi.dll 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM2005.90.2047.0 C:WINDOWSassemblyGAC_64Microsoft.SqlServer.Replication9.0.242.0__89845dcd8080cc91Repl.dll 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.SqlServer.DataStorage9.0.242.0__89845dcd8080cc91Microsoft.SqlServer.DataStorage.dll 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesCommon FilesMicrosoft SharedDatabase ReplicationResources10332005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLInstall plhtfin.sql 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLInstall C:Program FilesMicrosoft SQL Server90COMqrdrsvc.exe 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM2005.90.2047.0 C:Program Files (x86)Microsoft SQL Server90COMsnapshot.exe 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM9.0.2047.0 C:Program FilesMicrosoft SQL Server90COMsqlmergx.dll 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM2005.90.2047.0 C:Program FilesMicrosoft SQL Server90COM abldiff.exe 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90COM2005.90.2047.0 C:Program FilesMicrosoft SQL Server90COMDISTRIB.exe 05/04/2006 08:19:38.185 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnDatabaseMail90.exe 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources30822005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources2052sqlevn70.rll 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources10532005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1046sqlevn70.rll 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources10432005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1042sqlevn70.rll 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources10412005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1040sqlevn70.rll 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources10362005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1033sqlevn70.rll 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources10312005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1028sqlevn70.rll 05/04/2006 08:19:38.185 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources10332005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnsqlacc~1.dll 05/04/2006 08:19:38.185 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90Shared2005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnxmlrwbin.dll 05/04/2006 08:19:38.201 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn2.0.3609.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnsqlsvc90.dll 05/04/2006 08:19:38.201 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn2005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSQLBOOT.dll 05/04/2006 08:19:38.201 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn2005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnxplog70.dll 05/04/2006 08:19:38.201 Failed to read version information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn2005.90.2047.0 E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnatchp~1.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1033SQLAGENT90.RLL 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1033SQLAGENT90.RLL 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnResources1033SQLAGENT90.RLL 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSQLAGENT90.EXE 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSQLAGENT90.EXE 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSQLAGENT90.EXE 05/04/2006 08:19:38.201 Failed to read version information for the following file: C:Program Files (x86)Microsoft SQL Server90SharedResources10339.0.2047.0 C:Program Files (x86)Microsoft SQL Server90Sharedmsmdrdir.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedmsmdlocal.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedmsmdlocal.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedmsmdlocal.dll 05/04/2006 08:19:38.201 Failed to read version information for the following file: C:Program Files (x86)Common FilesSystemole db2.0.3609.0 C:Program Files (x86)Common FilesSystemole dbxmlrw.dll 05/04/2006 08:19:38.201 Failed to read version information for the following file: C:Program FilesCommon FilesSystemole db2.0.3609.0 C:Program FilesCommon FilesSystemole dbxmlrw.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlbrowser.exe 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlbrowser.exe 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlbrowser.exe 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedmsasxpress.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedmsasxpress.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedmsasxpress.dll 05/04/2006 08:19:38.201 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedmsasxpress.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedmsasxpress.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedmsasxpress.dll 05/04/2006 08:19:38.216 Failed to read version information for the following file: C:Program Files (x86)Microsoft.NETADOMD.NET90enMicrosoft.AnalysisServices.AdomdClient.xml 05/04/2006 08:19:38.216 Failed to read version information for the following file: C:Program FilesMicrosoft.NETADOMD.NET90enMicrosoft.AnalysisServices.AdomdClient.xml 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft.NETADOMD.NET90Microsoft.AnalysisServices.AdomdClient.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.AnalysisServices.AdomdClient9.0.242.0__89845dcd8080cc91Microsoft.AnalysisServices.AdomdClient.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft.NETADOMD.NET90Microsoft.AnalysisServices.AdomdClient.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.AnalysisServices.AdomdClient9.0.242.0__89845dcd8080cc91Microsoft.AnalysisServices.AdomdClient.dll 05/04/2006 08:19:38.216 Failed to read version information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnResources1033 E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnResources1033sqlcm.xml 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnResources1033SqlManager.rll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnResources1033SqlManager.rll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnResources1033SqlManager.rll 05/04/2006 08:19:38.216 Failed to read version information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnResources1033 E:Program FilesMicrosoft SQL Server90ToolsBinnResources1033sqlcm.xml 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnResources1033SqlManager.rll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnResources1033SqlManager.rll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnResources1033SqlManager.rll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsinnSqlManager.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsinnSqlManager.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsinnSqlManager.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsinnSqlManager.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsinnSqlManager.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsinnSqlManager.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnatchparser90.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnatchparser90.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server (x86)90ToolsBinnatchparser90.dll 05/04/2006 08:19:38.216 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnatchparser90.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnatchparser90.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnatchparser90.dll 05/04/2006 08:19:38.232 Failed to read version information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinnResources10332005.90.2047.0 E:Program FilesMicrosoft SQL Server (x86)90ToolsinnSQLSVC90.DLL 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsinnSQLSVC90.DLL 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsinnSQLSVC90.DLL 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: E:Program FilesMicrosoft SQL Server90ToolsinnSQLSVC90.DLL 05/04/2006 08:19:38.232 Failed to read version information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinn2.0.3609.0 E:Program FilesMicrosoft SQL Server90ToolsBinnSQLdiag.exe 05/04/2006 08:19:38.232 Failed to read version information for the following file: E:Program FilesMicrosoft SQL Server90ToolsBinn2005.90.2047.0 C:Program Files (x86)Microsoft SQL Server90Sharedsqlsvc~1.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlsecacctchg.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlsecacctchg.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlsecacctchg.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlftacct.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlftacct.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlftacct.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedisacctchange.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedisacctchange.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedisacctchange.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsvrenumapi.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsvrenumapi.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsvrenumapi.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlsvcsync.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlsvcsync.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlsvcsync.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlsecacctchg.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlsecacctchg.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlsecacctchg.dll 05/04/2006 08:19:38.232 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlftacct.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlftacct.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlftacct.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedisacctchange.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedisacctchange.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedisacctchange.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsvrenumapi.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsvrenumapi.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsvrenumapi.dll 05/04/2006 08:19:38.247 Failed to read version information for the following file: C:Program Files (x86)Microsoft SQL Server90Shared2005.90.2047.0 C:Program FilesMicrosoft SQL Server90SharedSqlBoot.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90Sharedsqlsqm.exe 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90Sharedsqlsqm.exe 05/04/2006 08:19:38.247 Failed to read version information for the following file: C:Program Files (x86)Microsoft SQL Server90Shared9.0.2047.0 C:Program Files (x86)Microsoft SQL Server90Shareddbghelp.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90SharedSqlDumper.exe 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90SharedSqlDumper.exe 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90SharedSqlDumper.exe 05/04/2006 08:19:38.247 Failed to read version information for the following file: C:Program FilesMicrosoft SQL Server90Shared9.0.2047.0 C:Program FilesMicrosoft SQL Server90Shareddbghelp.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90SharedSqlDumper.exe 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90SharedSqlDumper.exe 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:Program FilesMicrosoft SQL Server90SharedSqlDumper.exe 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.SqlServer.Rmo9.0.242.0__89845dcd8080cc91Microsoft.SqlServer.Rmo.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.AnalysisServices9.0.242.0__89845dcd8080cc91Microsoft.AnalysisServices.DLL 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.DataWarehouse.Interfaces9.0.242.0__89845dcd8080cc91Microsoft.DataWarehouse.Interfaces.DLL 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_64Microsoft.SqlServer.BatchParser9.0.242.0__89845dcd8080cc91microsoft.sqlserver.batchparser.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_64Microsoft.SqlServer.BatchParser9.0.242.0__89845dcd8080cc91microsoft.sqlserver.batchparser.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_64Microsoft.SqlServer.BatchParser9.0.242.0__89845dcd8080cc91microsoft.sqlserver.batchparser.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.SqlServer.SqlEnum9.0.242.0__89845dcd8080cc91Microsoft.SqlServer.SqlEnum.dll 05/04/2006 08:19:38.247 Failed to read associated hotfix build information for the following file: C:WINDOWSassemblyGAC_MSILMicrosoft.SqlServer.Smo9.0.242.0__89845dcd8080cc91Microsoft.SqlServer.Smo.dll 05/04/2006 08:19:38.263 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90SharedSqlSAC.exe 05/04/2006 08:19:38.263 Failed to read associated hotfix build information for the following file: C:Program Files (x86)Microsoft SQL Server90SharedMicrosoft.SqlSac.Public.dll 05/04/2006 08:21:12.933 Attempting to install file: sqlrun_sql.msp 05/04/2006 08:21:12.949 Attempting to install file: \REPORTSe$7d39b5ebc15c1b5ee29a229c92b3HotFixSQLFilessqlrun_sql.msp 05/04/2006 08:21:12.949 Creating MSP install log file at: C:WINDOWSHotfixSQL9LogsSQL9_Hotfix_KB913090_sqlrun_sql.msp.log 05/04/2006 08:21:12.949 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller 05/04/2006 08:21:12.949 Failed to read registry key: Debug 05/04/2006 08:22:23.775 MSP returned 1603: A fatal error occurred during installation. 05/04/2006 08:22:23.838 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller 05/04/2006 08:22:23.838 Failed to read registry key: Debug 05/04/2006 08:22:23.838 Unable to install MSP file: \REPORTSe$7d39b5ebc15c1b5ee29a229c92b3HotFixSQLFilessqlrun_sql.msp 05/04/2006 08:22:23.838 The following exception occurred: Unable to install Windows Installer MSP file Date: 05/04/2006 08:22:23.838 File: depotsqlvaultsetupmainsetupsqlsesqlsedllcopyengine.cpp Line: 856 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product Status Summary: 05/04/2006 08:22:23.885 Product: SQL Server Native Client (64-bit) 05/04/2006 08:22:23.885 SQL Server Native Client (64-bit) (RTM ) - Success 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: Setup Support Files (64-bit) 05/04/2006 08:22:23.885 Setup Support Files (64-bit) (RTM ) - Success 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: Database Services (64-bit) 05/04/2006 08:22:23.885 Database Services (64-bit) (RTM 1399 ENU) - Failure 05/04/2006 08:22:23.885 Details: Unable to install Windows Installer MSP file 05/04/2006 08:22:23.885 Analysis Services (64-bit) (SP1 2047 ENU) - Not Applied 05/04/2006 08:22:23.885 Reporting Services (64-bit) (SP1 2047 ENU) - Not Applied 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: Notification Services (64-bit) 05/04/2006 08:22:23.885 Notification Services (64-bit) (SP1 2047 ENU) - Not Applied 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: Integration Services (64-bit) 05/04/2006 08:22:23.885 Integration Services (64-bit) (SP1 2047 ENU) - Not Applied 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: Client Components (64-bit) 05/04/2006 08:22:23.885 Client Components (64-bit) (SP1 2047 ENU) - Not Applied 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: MSXML 6.0 Parser (64-bit) 05/04/2006 08:22:23.885 MSXML 6.0 Parser (64-bit) (RTM ) - Not Applied 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: SQLXML4 (64-bit) 05/04/2006 08:22:23.885 SQLXML4 (64-bit) (RTM ) - Not Applied 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: Backward Compatibility (64-bit) 05/04/2006 08:22:23.885 Backward Compatibility (64-bit) (RTM ) - Not Applied 05/04/2006 08:22:23.885 05/04/2006 08:22:23.885 Product: Microsoft SQL Server VSS Writer (64-bit) 05/04/2006 08:22:23.885 Microsoft SQL Server VSS Writer (64-bit) (RTM ) - Not Applied 05/04/2006 08:22:23.885
I have tried different log ons - Domain Administration / Administrator (but not a local administrator)
I have been asked to provide a SQL Server 2000 Service Pack 4 validation procedure... I have been unable to locate any reference to how this can be validated in either the program itself or in the registry... Any help is appreciated...
Hi, i tried to install SQL Server 2000 Developer and MSDE the whole day on my Windows XP SP2. MDAC is the latest, that come with WinXP SP2 (2.81). The installation fails at the end after 100% complete.
It says: Translated: "the setup programm starts the server and installs the configuration you chose..." ("das setup-programm startet den server und installiert die von ihnen gewählte konfiguration...")
then it takes some time and the failure appears, saying: "the setup programm could not configure the server. you can find more information in the server-failure-log files and in "C:windowssqlstp.log."
We deploy an application that uses SQL Server Express 2005. One of our test engineers tried to use our setup on Windows XP SP 3. But the SQL server installer gave an error - unable to update msxml6r.dll. Is this a bug of the SQL Server installer or do we need to make use of a more recent version of msxml6?
I am having Windows 2012R2 Std with SQL2012SP2. Trying to add SQL cluster node2 but unable to locate the instance name when I click on drop down button.Understand that SQL Server Agent is required but it is not listed as cluster resource. Therefore, I perform the followingFrom Windows Power Shell with Administrator rights
1. Import-Module FailoverClusters 2. Add-ClusterResourceType "SQL Server Agent" c:windowssystem32SQAGTRES.DLL
Error: Add-ClusterResourceType : Unable to locate the cluster service executable on node1.The network name cannot be found.No problem to ping all cluster related names as well as fail-over to and from next available node.
I am trying to install SQL Server 2005 Standard on my laptop, which has Windows XP Professional with Service Pack 2. I could not able to install properly and i am getting error always. i tried whatever the people mentioned in Google, but I could not able to fix the problem. please some one can help my problem.
Here is the Error I am getting always "The certificate chain was issued by an authority that is not trusted" . I am trying for past few days i could not able to resolve.
please help
Note : I have SQL Server 2000 Client installed in my laptop. this is my development machine
Thanks
Paddy
Here is the Error message from Summary.txt
Product : SQL Server Database Services Error : SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
-------------------------------------------------------------------------------- Machine : W4102762 Product : Microsoft SQL Server 2005 Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_w4102762_SQL.log Last Action : InstallFinalize Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted. Error Number : 29515 -------------------------------------------------------------------------------- Machine : W4102762 Product : SQLXML4 Product Version : 9.00.1399.06 Install : Successful Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_w4102762_SQLXML4_1.log --------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk. 2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode. 3. after fail over done to 2nd secondary node what mode in production(readonly or read write). 4. how to rollback to production primary ,will change data in secondary will get updated in primary.