I have been asked to add a feature to some software I have written which needs to send reminder emails.
The reminders can have a recurrence, for example it might recur every 3 days or every 2 weeks. The reminders also have a start and end date. I have created a sql table with these fields:
I now need to write a stored procedure that will run every morning and send the reminders. I have no problem with sending emails from sql, the trouble I am having is I cannot figure out how to get the recurrences for the current day.
Hope this makes sense!
Sorry there is no code sample, I have been thinking about this one for a couple of days but I still don't know where to begin!
If anyone could offer any help it would be greatly appreciated!
I have put together the stored-procedure below to carry out update, delete and insert queries in one visit. The code has been pieced together from the pages listed at the bottom. I pass the procedure three XML strings and after testing it a few times it seems to work fine. I’m fairly new to stored procedures though, so I was hoping someone would answer these questions: 1. Is this an acceptable way to do this? Can you foresee any problems?2. I want to make this an ‘all-or-nothing’ event, i.e. if any part of the procedure fails, it must all fail. How would I achieve that?3. I want to know in my calling code what the result is. I’ve used output parameters before, but I’m unsure how to combine one with 2 above. Sorry this is a long script, but I’ve removed most of the column names and values to shorten it. Thanks in advance.CREATE PROCEDURE amendPageRecords @PagesToUpdate xml, @PagesToDelete xml, @PagesToInsert xml
SELECT PageID = UpdatePages.Item.value('@PageID', 'int'), PageType = UpdatePages.Item.value('@PageType', 'varchar(10)') FROM @PagesToUpdate.nodes('Pages/Page') AS UpdatePages(Item)
UPDATE page SET page.page_type = UP.PageType FROM page INNER JOIN @UpdateTable UP ON page.page_id = UP.PageID
-- DELETING RECORDS ------------------------------------------------------------ DECLARE @DeleteTable TABLE (PageID int)
INSERT INTO @DeleteTable (PageID) SELECT PageID = DeletePages.Item.value('@PageID', 'int') FROM @PagesToDelete.nodes('Pages/Page') AS DeletePages(Item)
DELETE FROM page FROM page INNER JOIN @DeleteTable DP ON page.page_id = DP.PageID
SELECT SiteID = InsertPages.Item.value('@SiteID', 'int'), PageType = InsertPages.Item.value('@PageType', 'varchar(10)') FROM @PagesToInsert.nodes('Pages/Page') AS InsertPages(Item)
INSERT INTO page SELECT SiteID, PageType FROM @InsertTable
END GOCode taken from:http://weblogs.asp.net/jgalloway/archive/2007/02/16/passing-lists-to-sql-server-2005-with-xml-parameters.aspxhttp://www.eggheadcafe.com/articles/20030627c.asphttp://www.sommarskog.se/arrays-in-sql-2005.html
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Guys can you help please... At the moment I have an unknwon number of ID's and need their related info in another table (1,2,3,4,5 for example) and I'm looping and merging to get them as one table: For i = 1 to however many... Dataset = Select where ID = array(i) FinalDataset.Merge(Dataset) Next How can I write a stored proceedure or something where the loop is happening at the database end, to avoid going back and forth? I was thinking dynamically generating the sql statement: Select * from table where ID = 1 or ID =2 or ID =3...... But this could become huge if you had a couple of hundred to do...there must be a more efficient way to do it...
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have a date that is entered into the field, 12/17/2004. My client wants the site set up so that when after the date is entered, it automatically updates itself every week. So the date represents an event, and he wants to update the event date automatically instead of having a user login and update the date manually. So 12.17/2004 shoudl turn into 12/24/2004, and then 12/31/2004 and so forth.
One brilliant guy told me that if you entered a start date of and an end date then some how that might me be a little easier.
I have a situation where a common table within multiple databases across multiple servers is randomly getting corrupt. The database schema is identical for each database. There are approx. 200 copies of the database on each server. I am seeing one or two errors per week. There doesn't seem to be any similarities between the databases that are effected... It is always the same table that gets corrupted. The mulitple servers are using a SAN but since it is different databases / common table I have a hard time believing it is hardware related.
The error that the application throws is: Microsoft OLE DB Provider for ODBC Drivers (-2147467259) [Microsoft][ODBC SQL Server Driver][SQL Server]Could not find the index entry for RID '16b700000000000000030002' in index page (1:5366), index ID 0, database 'DISOPT'.
When running a DBCC on the table the following is returned:
Database DISOPT consistency errors in table TF_FILE_METADATA_VALUES fixed no data loss reported. DBCC results for 'TF_FILE_METADATA_VALUES'. The error has been repaired. Clustered index successfully restored for object 'dbo.TF_FILE_METADATA_VALUES' in database 'MUTGEN'. There are 277 rows in 2 pages for object 'TF_FILE_METADATA_VALUES'. CHECKDB found 0 allocation errors and 1 consistency errors in table 'TF_FILE_METADATA_VALUES' (object ID 1332199796). CHECKDB fixed 0 allocation errors and 1 consistency errors in table 'TF_FILE_METADATA_VALUES' (object ID 1332199796).
This corrects the problem and the app functions as normal. The errors are random across databases but ALWAYS the same table.
Hi! My problem/"goal to achieve" is the following.. Users can insert orders in a db-table. The date on which they've been created is stored. I want the server to insert a new record in another table (accounts) for every order which is older than 2 weeks. How should I do that? With a custom action which checks all orders (a customer must press some button every day). Or a static "update-class" with a kind of timer which does the action every 24 hours? Of course an automatic solution will be the best! Another question is: how can i ensure that an instance of this "update-class" will never die? Thanks so far...
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I downloaded VisualBasic 2005 Express Edition recently, and the installation went flawlessly, but when I tried to download the optional component SQL server express, the installation failed. When two subsequent installations failed, I decided I'd get along without it, until such time as I discovered I *needed* it. Well, I'm here, and the installation is still failing. I've tried both installing it though the VBstudio setup, and downloading it separately, but both fail at roughly the same point. The error from the standalone installation is more descriptive:
TITLE: Microsoft SQL Server 2005 Setup ------------------------------
SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29513&EvtType=sqlca%5csqlmofca.cpp%40Do_sqlMofcomp%40Do_sqlMofcomp%40x80041002
The link leads to an apology - they have no information on this subject. Of the help files, the troubleshooting page contains nothing (noticeably) relevant, and the log files have nothing obvious either, at least as far as I could tell... but then, I have no idea, which is why I'm here
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
We have some SSIS packages that are running on a recurring SQL Job. They work and play fine. They ran for about three iterations and then decided to stop....they don't report errors, they just don't do anything. They sit as if they were disabled (but they aren't disabled, I checked the MSDB database).
You can manually execute the packages and they work fine.
I have dumped and reloaded these packages and that hasn't fixed the issue.
If I setup a simple recuring job that executes a sql script every few minutes that works fine and you can see that it executes every few minutes. But these SSIS packages just sit....and do nothing. But they were working for the first few iterations.
I have also redeployed the SSIS packages and that hasn't fixed it either.
Ok, basically, my SSIS flow gets data from different excel worksheets and puts in the db.
For some reason its being very incosistent. I fixed all the problems I was having but one component keeps coming up with the [ component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA" ] error.
So, I click on the component, it asks if i want to fix the metadata stuff, I say yes, it fixes it, I run the app, everything's cool.
The I run the app again and again it comes up with this f** error?
Is there anyway SSIS can't just ignore this metadata stuff??
I have created a SSIS package which calls child packages internally. In other words there is hierarchy of packages. I am using For Loop Container with certain check conditions to execute whole set of packages repeatedly. I have to execute this set for almost 5000 times. But my problem is this set fails after every 50 and sometimes 55 cycles. Can Anybody let me know how to get solution for such a problem?
Hello, This is my first project at the company I recently joined. It is the most challenging project I ever had.
It is a kind of web-scheduler. it let you save appointments which could be one time or periodic. For example, it could be like every monday, every other monday, first tuesday every monday, and so on.
once they are saved, it should be able to display only those appointments the user have on a specific day.
I'd like to know how database has to be designed to meet such a challenging requirement? I'd like to hear anything from you if you have had similar project before.
I am trying to load Project Real. I get warnings when opening the RecurringETL package. However I created the two environment variables it's looking for and have confirmed these variables are functional. I am unsure how to troubleshoot this and am afraid to do anything given these warnings. Where is the configurations collection??????:
Warning 1 Warning loading TestHarness.dtsx: The configuration environment variable was not found. The environment variable was: "REAL_Configuration". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid. C:Microsoft Project REALETLTestHarness.dtsx 1 1
Warning 2 Warning loading TestHarness.dtsx: The configuration environment variable was not found. The environment variable was: "REAL_Root_Dir". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid. C:Microsoft Project REALETLTestHarness.dtsx 1 1
Warning 3 Warning loading TestHarness.dtsx: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. C:Microsoft Project REALETLTestHarness.dtsx 1 1 Thanks
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I have a problem where I want to write a function to remove recurring characters from a string and replace them with a single same character.
For instance I have the string '12333345566689' and the result should be '12345689'. In Oracle I could do this with "regexp_replace('12333345566689', '(.)1+', '1')", but in T-SQL the only solution I could think of is something like this:
DECLARE @code NVARCHAR(255) SET @code = '12333345566689'; SET @code = REPLACE(REPLACE(REPLACE(@Code, '1', '~1'), '1~', ''), '~1', '1');
and repeat this for 2 - 9. But I'm sure there is a more elegant version for this in SQL Server 2012.
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I am having a recurring issue that involves a stored proc using OPENROWSET to query an excel file. I used the surface area config to enable this on the server, and made sure that is still set. After an undetermined amount of time, the OPENROWSET query starts failing with this message:
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" returned message "Unspecified error". Msg 7303, Level 16, State 1, Line 1 Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
I corrected this previously by restarting the SQL server, but not before I checked permissions, the excel file itself, etc, and that was the last thing to try.
I am using SQL 2005 with SP1 installed - my primary approach to tackling this issue is to install the SP2, but I did not find this bug referenced in the fixes, and was wondering if anyone else had further insight.
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END. Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system. I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible? Thanks, Kevin
IF (@i_WildCardFlag=0)BEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END PRINT @SQLString SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)' EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS GO SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric. REQUIREMENT: The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing for each user name in a temporary table (already done) total = result from execute totaling stored procedure Can you help with this Thanks
IF @@ERROR = 0 BEGIN -- Success. Commit the transaction. Commit Tran END ELSE Rollback Tran
return GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the "SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
