On my new install of RS, I've got a red X on Web Service Identity in Configure Report Server. The Report Server and Report Manager virtual directories are there and working. The application pool is the default and the App Pool is running as Network Service. rsreportserver.config shows
<WebServiceAccount>NT AuthorityNetworkService</WebServiceAccount>
Any tips on how to get the red X to go away?
Is there a way to modify the RSReportServer.config file with a Web Service call. We want to install an app and have it modify the Renders. We want to remove the Tiff export for example. We also want to add simple headers to Excel. Right now we have to open the file and then make our edits.
View 1 Replies View RelatedI have a server SBS with sqlserver 2005 all the processes are fucionado ok more web service identity in the this giving error. in reporting services configuration to manager web service identily this giving the error
ReportServicesConfigUI.WMIProvider.WMIProviderException: A virtual directory must first be created before performing this operation.
em ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
I recently renamed my server from tmpSrv to tfsSrv (names have been changed to protect the innocent). When I go to the Reporting Services Configuration Manager I have all greens except for the Web Service Identity field.
Trying to set that isn't working...the ASP.Net service account is NT AuthorityNetwork Service, and the application pools defined are using that Network Service account as well. When I hit the "Apply" button I get a message saying:
Setting Web Service Identity
There was an error setting the identity for the web service. The previously set identity will still be used.
I'm trying to install Team Foundation Server on the box, and when I run the tfrsconfig /verify tool I see that the Web Service Identity is not set at all.
I've been battling this for a couple of days now with no effect. I even broke down and gave "Everyone" administrative access on the server in an attempt to fix it.
Thanks for any help
I have a few problems, all showing up in the Reporting Services Configuration Manager, which I will try to summarize.
SERVER SOFTWARE
Windows 2003 Standard 64bit SP1
SQL 2005 Enterprise 64bit SP2
PROBLEMS
1) I have one Red "X" in Reporting Services Configuration Manager, "Web Service Identity". The ASP .NET Service Account field is empty, but I can open the rsreportserver.config file and see "<WebServiceAccount>NT AuthorityNetworkService</WebServiceAccount>". In addition, when I pick "ReportServer" from the drop-down list for both Report Server and Report Manager fields and click Apply, I get the following error:
ReportServicesConfigUI.WMIProvider.WMIProviderException: A virtual directory must first be created before performing this operation.
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
2) In the "Report Server Virtual Directory" section, the Website field is not populated but the setup worked and virtual directories were created. Why isn't it showing "Default Web Site" in this blank?
3) In the "Report Manager Virtual Directory" section, same problem as in item number 2 above.
Thanks for any help you can offer.
I can't get this to work. This is my setup:
2 Windows 2008 Server machines
- first machine holds MOSS 2007
- second machine SQL 2005 SP2+MOSS Web Front
MOSS config. database is on Sql server. I'm trying to configure Reporting Services on SQL server in Sharepoint Integration Mode. As per Microsoft tutorials I've set up domain accounts for Sql services. When I use Reporting Services Configuration to configure Web Service Identity to use an App. Pool that runs under a domain account i get this error:
"ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)"
Database Setup and Windows Service Identity work fine using domain account.
I've searched many forums, Microsoft "How To" to no avail.
If anyone has some ideea on this please help.
Hello!
I´m trying to setup a Report Server on my SQL 2005 server. In Reporting Services Configuration Manager I get an error when i try to create the Web Sevice Identity
ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 80070003
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
The default website contains an office sharepoint 2007 beta solution if that could cause the error..
Would be real grateful for some hints...
Regards
Erik B
Hi all,
I have installed SQL Server 2005 Express Edition with Advanced Services and also Toolkit in my system. Following which I cofigured the Reporting Services Configuration.
When I try http://localhost/Reports it throws the following error.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) (rsRPCError) Get Online Help
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Bad Data. (Exception from HRESULT: 0x80090005)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have tried to search exhaustively for the solution and nothing seems to be crystal clear in solving the above error.
Under Reporting Services Configuraiton Manager (RSCM) all are ticked excepting:
Initialization, SharePoint Integration,Encryption Keys, EMail Settings,Execution Account.
Before this unknowingly I have changed "Windows Service Identity" during configuration which is not the same as Web Service Identity. Under "Web Service Identity" ASP.Net Service Account is listed as <machinename>ASPNET.
Now under "Windows Service Identity" it is selected to "Windows Account" : homequinn. After reading the installation steps it is suggested to have it with "Buil-in Account" ->"Network Services" is recommended. When I try to change it asks me for password and key file. Once I provide it, it is throwing me the following error.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
ReportServicesConfigUI.WMIProvider.WMIProviderException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.BackupEncryptionKey(Byte[]& encryptedBytes, String password)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Can someone tell how should I proceed to get the reporting services working.
Hi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
Sim
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. Â My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.Â
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
While I have learned a lot from this thread I am still basically confused about the issues involved.
.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.
To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.
1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.
2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!
3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?
TIA,
Barkingdog
Hello all,
I'd like to know what's considered a best practice in the following scenario...
We're in the process of converting DTS to SSIS, our current SQL2K setup has one DTS package per database, each database and package are mirror images of each other, with the exception of connection properties and the files path's they pull from. (Occasionally there may be a one off Execute SQL Task that differs from package to package...but this will be handled in a different manner outside of the package from this point on)
From a administration perspective this has been somewhat cumbersome, as every time there is a schema change we need to update the transformations in each individual package...after updating 120 packages my index finger has a bad case of carpel tunnel!
My thought with SSIS is that I can create one package, with many configuration files (one for each database).
Now my question is, 1) is this a good idea? 2) Anytime we create a new database (New Customer = New Database) and need to create a new xml config file, do I have to create the config in BIS/SSIS package then redeploy the package?...or Can I simply add a new config file to the appropriate directory and reference this config in the scheduled job?
Any suggestions are greatly appreciated!
I want to insert a new record into a table with an Identity field and return the new Identify field value back to the data stream (for later insertion as a foreign key in another table).
What is the most direct way to do this in SSIS?
TIA,
barkingdog
P.S. Or should I pass the identity value back in a variable and not make it part of the data stream?
I have table of three column first column is an ID column. However at creation of the table i have not set this column to auto increment. Then i have copied 50 rows in another table to this table then set the ID column values to zero.
Now I have changed the ID column to auto increment seed=1 increment=1 but the problem is i couldn't figure out how to update this ID column with zero value set to each row with this auto increment values so the ID column would have values from 1-50. Is there a away to do this?
Ok,I just need to know how to get the last record inserted by the highestIDENTITY number. Even if the computer was rebooted and it was twoweeks ago. (Does not have to do with the session).Any help is appreciated.Thanks,Trint
View 2 Replies View RelatedHi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
I'm working with a third-party database (SQL Server 2005) and the problem here is the following:
- There are a bunch of ETL processes that needs to insert rows on a table (let's call this table T) and at the same time, an ERP (owner of T) is up and running (reading, updating and inserting on T).
- The PK of T is an Integer.
Today all ETL processes uses (select max(ID) + 1 from T) to insert new rows, so just picture the scenario. It is a mess! Everyday they get duplicate key error when 2 or more concurrent processes are trying to insert a row (with the max) at the same time.
Considering that I can't change the PK, what is the best approach to solve this problem?
To sum up:
* I need to have processes in parallel inserting on T
* I can't change anything on T
* The PK is NOT an Identity
I have an almost virgin install of SQLExpres running on a WIN2K Pro system.
Have been able to create and connect db to Access 2000 without problem.
Now I wish to extend to remote connections. Using Surface Area Configuration tool, I changed Remote Connections to Local and Remote.
Whenever this setting contains TCP/IP and I try to restart the service I receive the following errors:
System Log:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 10013.
Application Log:
Server TCP provider failed to listen on [ 'any' <ipv4> 0]. Tcp port is already in use.
TDSSNIClient initialization failed with error 0x271d, status code 0xa.
TDSSNIClient initialization failed with error 0x271d, status code 0x1.
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
If I change back to Local Connections Only or Local and Remote using named pipes only, the service starts up again without a problem.
After five days of investigating, researching, reinstalling and waiting I have to ask for help.
Any suggestions or leads?
Thank You in advance.
I have a VM with SP2013 and SQL Server 2012 SP1. I have installed the powerpivot plugin SP1.But when I run the PowerPivot for SharePoint 2013 configuration tool.
View 3 Replies View RelatedHello! I have the following problem. I developed CLR Stored Procedure "StartNotification" and deploy it on db. This sp calls external web service. Furthermore, this sp is called according with SQL Server Agent Job's schedule. On my PC SQL Server works under Local System account and this web service is called correctly (Executed as user: NT AUTHORITYSYSTEM). But on ther other server the following exception is raised during job running:
Date 17.04.2007 16:42:10
Log Job History (FailureNotificationJob)
Step ID 1
Server MSK-CDBPO-01
Job Name FailureNotificationJob
Step Name MainStep
Duration 00:00:00
Sql Severity 16
Sql Message ID 6522
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: CORPmssqlserver.
A .NET Framework error occurred during execution
of user defined routine or aggregate 'StartNotification':
System.Security.SecurityException: Request for the permission of type
'System.Net.WebPermission, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' failed. System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.Check(Object demand,
StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.CodeAccessPermission.Demand()
at System.Net. The step failed.
What is the reason of this behaviour? Unfortunately I do not have direct access to this server.
I have the following guesses:
1) CORPmssqlserver may have not enough permissions to call web service
2) Something wrong with SQL Server account's permissions
2) Something wrong with SQL Server Agent account's permissions
I will take the will for the deed. Thanks.
We are using the whole BI-package from Microsoft - from SQL, DTS-package,Raporting Service and Analyze Service.
It should be very helpful to be able to create a metadata databases where you could find all releations between different objects (tables,views,reports,cubes,DTS-package,Databases.
Just to get answer for: 'where is view xxx used', 'what are Report xxx depending upon'.
While everything exists in different SQL databases it should possible to do.
Has anyone any comments or the same needs ?
I have a initiator and a target service broker peer.
Both are controlled by a C# unit test. The initiator uses the Microsoft.Samples.SqlServer class. The target service uses stored procedure activation.
Sending a message from the initiator to the target, saves the content of the message, along with its conversation handle in the target's database specific table.
The unit test needs - at a later time - to instruct the target to send a message back on the same conversation handle to the initiator service.
For this the C# unit test creates a Conversation off of the saved conversation handle:
Service client = new Service("cleintservicename", conn, tran);
Conversation dialog = null;
dialog = new Conversation(client, convHandle);
Sending the message on this dialog generates an error "Message body: <Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8495</Code><Description>The conversation has already been acknowledged by another instance of this service.</Description></Error>".
Is the error due to the fact that a service - using the activated stored procedure already picked up the conversation, so that a new reference to the service can not be created through the Service class in CLR?
If so, I might need then to skip the activated stored procedure in favor or a CLR service, alltogether?
Any help - greatly appreciated.
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
I am trying to send a message between to SQL Server 2005 instances on two different machines. I have checked all my routes and all my objects appear to be setup correctly. However, when running Profiler on the target machine, I receive the "This message has been dropped because the TO service could not be found. Service name: "[tcp://mydomain.com/TARGET/MyService]". Message origin: "Transport". This is my activated stored procedure that is sending the message to the target service. I am using certificate security. Any help appreciated....
CREATE PROCEDURE [usp_ProcessMessage]
AS
BEGIN
SET NOCOUNT ON;
DECLARE @conversation_handle uniqueidentifier
DECLARE @message_body AS VARBINARY(MAX)
WHILE (1=1)
BEGIN
BEGIN TRANSACTION;
WAITFOR(RECEIVE TOP (1)
@conversation_handle = conversation_handle,
@message_body = message_body
FROM [tcp://mydomain.com/INITIATE/MyQueue]
), TIMEOUT 1000;
IF (@@ROWCOUNT = 0)
BEGIN
COMMIT;
BREAK;
END
END CONVERSATION @conversation_handle
IF @message_body IS NOT NULL
BEGIN
BEGIN DIALOG CONVERSATION @conversation_handle
FROM SERVICE [tcp://mydomain.com/INITIATE/MyService]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
ON CONTRACT [tcp://mydomain.com/INITIATE/MyMessage/v1.0]
WITH ENCRYPTION = ON, LIFETIME = 600;
SEND ON CONVERSATION @conversation_handle
MESSAGE TYPE [tcp://mydomain.com/TARGET/VisitMessage]
(@message_body);
END
COMMIT;
END
END
GO
My endpoints are created like so:
CREATE ENDPOINT MyEndpoint
STATE = STARTED
AS TCP
(
LISTENER_PORT = 4022
)
FOR SERVICE_BROKER (AUTHENTICATION = CERTIFICATE MasterCertificate)
GO
GRANT CONNECT TO CertOwner
GRANT CONNECT ON ENDPOINT::MyEndpoint TO CertOwner
GO
And my routes like so:
GRANT SEND ON SERVICE::[tcp://mydomain.com/INITIATE/MyService] TO CertOwner
GO
CREATE REMOTE SERVICE BINDING [MyCertificateBinding]
TO SERVICE '[tcp://mydomain.com/TARGET/MyService]'
WITH USER = CertOwner,
ANONYMOUS=OFF
CREATE ROUTE [tcp://mydomain.com/INITIATE/MyRoute]
WITH SERVICE_NAME = '[tcp://mydomain.com/TARGET/MyService]',
BROKER_INSTANCE = N'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx',
ADDRESS = N'TCP://xxx.xx.xx.xx:4022'
GO
I have configured an instance to use static port, say 1435, and I turned off the Browser service.
I would like to know if I can use SSMSE to connect to the instance database directly. The instance is listening at port 1435 and accepting connection requests from other methods.
What I need to put into the "Server name: " field?
Normally, it would be like: <serverIP><InstanceID> with Browser turned on.
Now how do I add the port information to it, I tried
<serverIP>:<portNumber><InstanceID>
<serverIP><InstanceID>:<portNumber>
<serverIP><InstanceID> <portNumber>
None of them worked.
Any suggestions?
Thanks.
All,
I am looking at implementing some sort of throttling whereby "expensive" reports are setup as Subscriptions (and hence are run by the Windows Service), while all other requests go the Web Service.
My question is:
Do the two systems share any underlying systems? I understand (of course) that they use the same DB, etc. etc. However, I can't quite tell whether there is an underlying engine that is a common base or if they really just spin up different instances of the same objects and essentially each host the application separately?
Any help is greatly appreciated!
Mark
I am currently hardening our SQL 2012 (with AlwaysOn Availability Groups) environment. Both the SQL service and agent account are using service accounts (only domain user). SQL browser service is disabled. Permissions to all roles are handled by using domain groups.
Currently a lot of (default) NT Service accounts are listed (some with sysadmin privileges). Are there accounts that can be removed?
Hi all,
I do understand that it is highly recomended to have aserprate user (perfered a domain user account) for each of the SQL Server service and SQL Agent service.
What is the reason behind that? (Someone told me to not run the service with an account that has a powerul privilegs! - I don't undrstanmd this point can you explain it please?)
What is the diffrent between: 1- Local System account 2 -Network Service account
Thanks in advanced!
CS4Ever
Hello,
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
Thank you very much,
Annie
Hi,My application is acting weird and the research I've done leads me to an answer why it's breaking, but not how to fix it.My web app is hosted by a remote company. I have the main website sitting in the root web directory and in a subfolder I have another application that will handle login and updating the content in the SQL 2K5 backend (not an Express DB).The website itself is able to pull in informaiton from the DB without any trouble, so I know it's able to connect to the DB and everything is peachy. The login app though is acting as though it can't get to the DB. I've applied the ASPNET schema to the DB using the aspnet_regsql.exe from the framework and the login application is using the same connection string as the main website.One thing to note here is that the website and the login app have seperate web.config files since they were developed as different projects.With my customized provider defined in the web.config for the login app I get this error on page load:"Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This
error can be caused by a virtual directory not being configured as an
application in IIS." If I comment out the custom provider, the page loads but when I try to create a user it tells me that "...the SQL Server couldn't be contacted. This may be because it doesn't accept remote connections." Thing of it is that it's not a remote connection and it's the same connection string and db as the other site.Now, the research I've done points at the two different web.config files, which makes sense. But how do I make the one web.config work for both the website and the subdirectory with the login app? Keep in mind that I can't create any new virtual directories or modify IIS since this is a remote hosting company.Can someone help me understand the fix with a little more clarity?
Hi,
I'm kind of the first person at my new company to start a project using SSIS. My question(s) revolves around setup and configuration, maybe even best practices.
1. Connection Manager Config - What are some of the methods you use to config your connection managers? I was planning on creating a folder (C:SSISConfig or something) and keeping a config file for each connection there. That way it would be fairly trivial for each developer to also put said folder on there box for deving.
2. Solution set up - Are people creating solutions for each package or just using one Master solution and adding all the packages to that? Or maybe some combination, like having solutions for different areas of functionality or something..? I'm trying to figure out what the pain points are with different approaches.
If you have any other information or horror stories about SSIS that you think might help, feel free to pass them along.
Thanks,
-Ryan
I want to make an application using a distributed database (single logical database, parts of which are located at more than one location or more than one server). It acts as a single collection of data but the database itself is geographically in separate locations.
How do I make it in SQL Server 2005?
Hello All,
I am trying to use a custom C# dll from within a script task. The C# dll relies on the Enterprise Library 2.0. Where do I put the enterprise library configuration when I am debugging a package and then when I have the package in production. I cannot find any documentation anywhere on this.
Thanks for any help,
Justin