Hi i get the above error when moving from one page to another. the following code is used. Can u help
Response.Redirect("Applicationform2.aspx?Id="+StudentID.Text+"&nam="+Name.Text+"&surNa="+ SrName.Text +"&DOB="+Ddate+ "&addr="+address.Text+"&pCode="+postal.Text+"&Cntry="+country.Text+"&email="+email.Text+"&ph="+phone.Text);
i dont understand the problem, can u help resolve the problem
I exporting a table of comments. There are some line returns in the comments. Some of these data are paragraphs of data! For some reason, when I am exporting the data, it treats the line return within the comment column as a new record. I am using a -c character data type so (newline character) is the row terminator. How do I get the BCP OUT to ignore a newline character within a record?
For example:
ID~Comment
-- -------
1~This is a comment
2~Hi,how are (user hit carriage)
you (you is part of next row in bcp out)
3~Next record
Thanks!
Joyce
Hi everyone!I'm be stuck by a simple issue about newline in C# and has relative with SQL. I wrote a SQL sentence like that: IF EXISTS(SELECT NAME FROM SYSOBJECTS WHERE NAME = 'TG1' AND TYPE = 'TR')" + " DROP TRIGGER TG1" + " GO " + " CREATE TRIGGER TG1 ON FILES FOR DELETE AS DELETE table1 FROM" + " table1 INNER JOIN DELETED ON DELETED.ID = table1.ID" + " GO " + " DELETE FROM table2 WHERE ID = 'ID00001'It's executing ok in SQL but when execute programming then " GO " have to break newline (
or System.Environment.NewLine), However seem have not mean for SQL Execute becoz will be appear
in SQL sentence. I'm not have experience about GO and TRIGGER so have any idea for this problem! Thanks so much.
Hey guys, how do I return a string from a stored proc that displays some of its text on a newline?
E.g.
"some text goes here
some more text goes here
etc etc etc"
I have a SQL 2005 stored procedure to generate an email when passed parameters such as receipient, subject etc
One of the paramteres passed to it is @body which is the body text of the message. I want to be able to add a couple of blank lines and then some footer information. This is working right now except I can't find the right way to add newlines into the string within the store procedure, so my footer information just tags right on after the bodytext.
I have tried but that literally adds the two characters and n
Can anyone advise how to generate newlien sequences in T-SQL.
Regards
Clive
Hello,
I have data in a database table that has newline data in it. It has a newline character in front of the text of the data, and for some reason, I can't figure out how I can replace it. I've tried entering in a return character between '' and I've tried trimming the text... How do I represent a newline character to remove it from the text?
Thanks.
hi all..
i have a text field which has to be shown in the result of a query execution as several lines..
eg: the result should be like this
8STK :: L/2
: M/2
: S/1
Original string is stored as "8STK :: L/2 : M/2 : S/1"
expect a positive reply soon..
thanx..
what is the newline character in sqlserver.
My problem is ,I have to display text (say "Hi abcd hhh") where is the newline.
But when i print this in sqlserver storedproc,Its displaying as it is instead of newlines.
please help
thx
Can I use a newline character in my query? I want to dynamically generate a statement, split on several lines. Simple example:
declare @cmd varchar(100)
select @cmd = 'select user_name(), getdate()'
select @cmd
The output will be: select user_name(), getdate()
Can I use something like this:
declare @cmd varchar(100)
select @cmd = 'select user_name(), getdate()'
select @cmd
so as to get an output like this:
select user_name(),
getdate()
Thanks.
I am using Derived Column Transformation Editor. I have 3 string values which I would like to combine them into one string and have a newline character inbetween the 3 strings. I cannot see a Char() function similar to TSQL to use for this purpose. I thought about creating a Variable but even to that I don't know how I can assign a newline character.
Any ideas?
Hi,
I'm trying to write a SQL SELECT statement where the phone numer ("telnr") is divided on three rows. How do I write a newline? I've tried , NEWLINE, and a few others.
Thanks in advance!
Pettrer, Sweden (VB, Sql Server, VWD Express, Asp.Net 2.0)
Code:
SelectCommand="SELECT [gID], [enamn], [fnamn], telnr1 + ' ' + telnr2 + ' ' + telnr3 As telnr, [epost] FROM...
The corresponding gridview's cell's value is
08-43 244 234 08-432
23 08-424333
and should be
08-43 244 234
08-432 23
08-424333
Hi, I want to add a newline in a content of sql column (using t-sql and not asp.net textbox) so when content is being rendered in a .net textbox I get separate rows, so insteadcol1 col2 col3 I woule like to havecol1col2col3Thanks
View 3 Replies View Relatedwhile(@@FETCH_STATUS=0)
begin
print 'inside while'
set @BodyContents = @BodyContents+@gotclientName+@gotproductName
set @Body= @Body + @BodyContents + ','
fetch next from resultcursor into @gotclientName,@gotproductName
print 'going outside of while'
end --while end
Client Name Product Name
aaa test1
bbb test4
how to format row like above. currently i am getting
aaa,test1,bbb,test4
I need to import a CSV file to a table and the CSV has an Address field that has a carriage return in it.
Example:
123 Main St.
Anywhere, CO, 99999
I'm working in Windows with SQL Server 2008. What can I do to the CSV file or from within SQL Managment Studio to get the BULK INSERT to work?
Here's my query:
BULK INSERT Contact
From 'C:UsersBrianDownloadsImport-FilteredContact9c.csv'
WITH
(
FIELDTERMINATOR = '|',
ROWTERMINATOR = '
'
)
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message.
How can I store over 16000 characters to sql table field (only one field) with language specific characters?
Thanks
I have the misfortune of converting a DTS package to SSIS that loads a flat file that has a text fields that can contain embedded text delimiters ("), column delimiters (,) and even new lines (CR+LF i.e.,hex 0D 0A) in it. A sample line from the file is posted here, remember this is just one line though it shows as three lines, since the third field has embedded new line in it:
4,"Sam","EVP; MARKETING PRODUCT MANAGER ""Level I"",
Internet Sales / HELP
8005551212",100
If you open in excel it handles it perfectly showing four fields, as below, and this is what I want ( I cannot get it aligned right in the posting, just save the above line in *.csv and open to see what it should be):
4 Sam "EVP; MARKETING PRODUCT MANAGER ""Level I"", 100
Internet Sales / HELP
8005551212"
Now, SSIS errors on the embedded text delimiters and breaks into two or three lines based on which option I chose. I have tried few options based on postings in the forum:
a). Using undouble and undoubleout: Does not work when there are embedded column delimiters (,) in the text field
b). Modified undouble script posted by lvovg at http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1718225&SiteID=1. Handles the embedded column delimiters (,) perfectly, but the embedded new lines (CR+LF i.e.,hex 0D 0A) are breaking it.
Since, I am using the ragged right format to read from the file then use transform script on the line by lvovg, the line is already broken by the ragged right format at the embedded new lines, hence does not work.
Right now I am stuck. Can someone please help (anyone from MS) ? I am already baffled at the amount of coding required to convert a very basic ( and working ) flat file load DTS package to SSIS. I am willing to persist bit longer to convert this to SSIS, before I give up and stick with DTS and wait for a fix / workaround.
Thanks.
Hi,
I am bulk inserting the data from a file into a table using the following format.
9.0
1
1 SQLCHAR 0 10 "
" 1 MSISDN SQL_Latin1_General_CP1_CI_AS
This works perfectly for me.
But my problem is that the firmat may not be generated in Windows and i can't user "
" as row delimeter.
It could be generated in Unix and want to use LF as the row delimeter.
Questions :
1) How do i specify this kind of new line (LF ) in formatfile?
2) Is there anyway that i can specify both the delimeters and let it use which ever is appropriate ?
Please provide some inputs on this??
Thank u so much
~Mohan
Hi everybody,
I would like to know if there is any property in sql2000 database to separate lowercase characters from uppercase characters. I mean not to take the values €˜child€™ and €˜Child€™ as to be the same. We are transferring our ingres database into sqlserver. In ingres we have these values but we consider them as different values. Can we have it in sqlserver too?
Hellen
I have a package that works fine when taking data from Oracle and loading it into SQL Server using Ole DB source and Ole DB destination tasks.
However I have a bad record in my source now. Date value for a specific field is less than year 1753. So everytime I run with that record present in the source, the load fails when it hits that record.
Whats the best to deal with this? I tried redirecting the bad record to a file but it doesnt work as SSIS doesnt let you create error output for ole db destination task, so it can sent the record into a flat file or something else for later review.
suggestions on how to trap the bad record and redirect it to a text file? and what would the dataflow look like?
thanks
This is my stored procedure .It is working fine .I want to capture the output in a print statement .Can anyone help me please .
alter proc r (@id INT)
as
BEGIN
DECLARE @input VARCHAR(800)
DECLARE @c_input INT
DECLARE @i_Input INT
DECLARE @input_left VARCHAR(800)
DECLARE @delimiter CHAR(1)
select @delimiter = ','
DECLARE @in VARCHAR(800)
DECLARE @list VARCHAR(800)
declare @list2 VARCHAR(800)
SET @input = 'db2,oracle,sybase'
select @c_input = (select dbo.Fx_CharCount(@delimiter,@input))
set @c_input = @c_input + 1
while @c_input > 0
BEGIN
select @i_input = charindex(@Delimiter,@input)
if @i_input != 0
BEGIN
select @input_left = left(@input, @i_input - 1)
END
else
select @input_left = @input
select @in = '''' + @input_left + ''''
select @list = ISNULL(@list + ',', '') + @in
select @input = right(@input ,(len(@input) - @i_input))
SET @c_input = @c_input -1
if @c_input = 0 or @input = @input_left
break
end
Print @list
EXECUTE ('SELECT Label FROM systemtype WHERE Label Not IN (' + @list + ')')
END
my actual task is like this
My input is a list of values seperated by commas
now my output should be list of values not in the table joined by comma
eg : if my table consists of list of all databases like
db2
oracle,
sybase,
mssql,
mysql,
myinput would be like this db2,sybase,oracle
my output should be mssql,mysql
how to get that
?
Any suggestions
Hello friends
i m using Sqlserver 2000 and i wish to know that ,
Can i redirect the output of the query into a text/xls/html file !
If possible then please help me !!!!!
Thanks
Hi,I have a DTS package (SQL2k, sp3) that I can to execute agains a newdatabase in the same server. I don't see how to easily redirect. If youchange the connection properties and clear the transformations you have toredo them one at a time (too long).If you don't data still goes to the old database.What to do?Sd
View 1 Replies View RelatedIn SSIS packages, records which do not get processed successfully can be re-directed to different destination for logging or correcting purposes. With 2 additional fields ERROR_CODE and ERROR_COLUMN appended to the dirty row values. To indicate the specific error that has occurred and on which column the error has occurred, I have certain doubts on this error reporting mechanism in SSIS packages.
The ERROR_COLUMN that is reported is not the column name but a number identifying that column uniquely. how can we at run time remap this column number to the exact column name?
Any help on this will be greatly appreciated.
Thanks,
S Suresh
create procedure usp_test (@AccountID INT)asbegin
DECLARE @getAccountID CURSOR
SET @getAccountID = CURSOR FOR
SELECT Account_ID
FROM Accounts
OPEN @getAccountID
FETCH NEXT
FROM @getAccountID INTO @AccountID
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT @AccountID
FETCH NEXT
FROM @getAccountID INTO @AccountID
END
CLOSE @getAccountID
DEALLOCATE @getAccountIDend i get nearly ten rows in the print statement how can i assign the output to a out variable where i get all ten rows.
Are there methods to redirect incoming data to different tables on the fly in the situation when application feeds data to the table via ODBC and I'm unable to alter ODBC or application settings? Somthing on the server side?
Kind regards,
A.
My requirement is something like this
I get department ,salary as input from a stored procedure .
now i have to select all the employee no's from the department table.
and based on that i have to select all the employee details from employee table whose salary is greater than given salary.
and the complete row should be passed as output parameter.
This cursor is fine
create procedure usp_proc (@dept char(10),@sal decimal (10,2),@emplist cursor varying output)
declare @empid int
DECLARE @getempid CURSOR
SET @getempid = CURSOR FOR
SELECT emp_id
FROM department where dname = @dept
OPEN @getAempid
FETCH NEXT
FROM @getempid INTO @empid
WHILE @@FETCH_STATUS = 0
BEGIN
select ename,dept,dob,doj,status,pos,sal from employee where empno = @emp_id
FETCH NEXT
FROM @getempid INTO @empid
END
CLOSE @getempid
DEALLOCATE @getempid
I am getting the complete row displayed as output .
How do i redirect the output to the declared output is my concern.
Is it possible to do a redirect to an arbitrary page in by using custom code?
eg.
Public sub myRedirect()
response.redirect(http://www.microsoft.com)
End sub
/Alex
Hi!
I have several lookups in my data flow task and for each of these I want to redirect error to one file (append data)
I created Flat File connection manager and first lookup goes fine with errors redirected to the file.
However, second error redirect that I am sending to the same file is failing.
Error I get is:
"[Flat File Destination 1 [14851]] Warning: The process cannot access the file because it is being used by another process.€?
So my goal is to have one central file where I would redirect all records that fail.
thanks
Good day experts,
I wonder if i got an answer for this.
How can i iliminate a letters from a set of integers and characters using a SQL Statement
for ex:
ABC9800468F
is that possible?
is there a function that i can use to iliminate them?
I have 2 pages. ( i want to pass information from a text box to the "certificate.aspx" database query)
page 1 certsearch.aspx
this is my script i have a label, commnad button, & textbox
If txtSearchCert.Text = "" Then
lblMsg.Text = "Please enter a certificate #"
Else
Response.Redirect("certificate.aspx" & txtSearchCert.Text)
End If
page 2 certificate.aspx
i am not sure what goes here.this is what i am trying
Request.QueryString = (txtSearchCert.text)
This is my database query on certificate.aspx page
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:imacsConn %>"
SelectCommand="SELECT * FROM [SummaryBlue] WHERE REPORTNUMBER = ?"></asp:SqlDataSource>
Hi,
I have to write a sp which takes in a input and redirect the result to a text file?
Any idea how to write it?
TIA.
Hi,
Does someone know how to spool output of a query/procedure to a file? I'm running MS SQL 2000 and will have to set up an automated job which will email this file to interested parties. Here is the procedure that I'm executing:
IF EXISTS (SELECT 1 FROM sysobjects WHERE [name] = 'sp_db_stats' AND type = 'P')
DROP PROC sp_db_stats
GO
CREATE PROCEDURE sp_db_stats
@DBName sysname = '*'
AS
DECLARE @DBStatus int,
@dbid int
DECLARE DBs CURSOR FOR
SELECT name, dbid, status
FROM master..sysdatabases
FOR READ ONLY
OPEN DBs
FETCH NEXT FROM DBs INTO @DBName, @dbid, @DBStatus
WHILE @@FETCH_STATUS = 0
BEGIN
exec master..sp_helpdb @DBName
NextDB:
FETCH NEXT FROM DBs INTO @DBName, @dbid, @DBStatus
END
CLOSE DBs
DEALLOCATE DBs
NoCursor:
RETURN
Thanks in advance!
-Alla
When I click the link to download the report in web page, it can pop up a window so that let me "open" or "save". After I open or save this (.pdf) file, I want to auto redirect to another web page. Can I do that? Here is my code:
Response.AddHeader("Content-Disposition","attachment;filename="" + getExportFilename() + """);
Response.ContentType = "application/octet-stream";
byte[] result = rs.Render(TLOWebRptFunc.GetSaveReportPath(this.Context), TLOWebRptFunc.GetReportType(this.Context), null, "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", wparam, credentials, null, out encoding, out mineType, out wparam, out warnings, out streamIDs);
Response.BinaryWrite(result);
Response.End();