Hi,
I know we can redirect a error to say an OLE DB Destination or textfile. Is there something we can do so that I can know seeing the error table the reason for which the row failed.
The Error table will look just similar to the destination table, but for one col which should hold the reason say 'Truncate error' etc...
Is this possible???
Thanks,
Hi,
I would like to know if the following is possible or if there is another way to implement this. I have a lookup transformation which i check to see if a specific record is stored. If nothing is returned i would like to insert a record into the table and then try the lookup again so that this time it will find the record and continue processing. How could i redirect the data flow to allow something like this to be done. I have tried linking the lookup failure constraint to an oledb destination and then attempted to link this back to the lookup but this has not worked.
Does anyone have any ideas on this?
Thanks in advance,
Grant
I know how to setup the components to redirect error rows. Unfortunately, you can only redirect error rows coming through a transform. The only ones you can actually redirect going from a transform to a data destination are things like violations of a primary/foreign key. However, redirection does not work if you have a row come through a transform to a destination and the error is a constraint violation like trying to stick a null into a not null column. This simply makes the entire thing fail and shut down instead of redirecting just the row which failed.
This is the specific case. I have a really messed up inbound file. The file is pipe delimited and at least every row is the same length. I bring the file in and shove the entire file through a derived column task to explicitly calculate nulls since I can't get the convert data task to handle it and I didn't want to rewire the entire package. From there the data flows into my first conditional split where I look at the 4th column of data and split off the rows for a specific record type. These rows flow through a convert data task to do the data type conversion specific to that record type and then flow into an OLE DB destination adapter. The remaining rows flow down into a derived column transform to do some additional scrubbing for the remaining record types. From there, it flows into a conditional split to split the records out 16 ways based on the value in the 4th column, with anything not matching being dumped back to an error file for someone to look at. Each leg of the conditional split sends the row through a convert data task to convert the data to the data types specific to that given record type. I have error files setup for each of these off the convert data task which redirect any row that fails conversion. This redirects any row which doesn't convert properly. It also succeeds in redirecting any row which violates a primary or foreign key constraint. However, it does not handle those cases where the inbound file had a null when the column within the database does not allow a null. In those cases, the entire thing simply fails and then we have to grab the error and have someone page through thousands of lines of the input file to try to find the row which had a problem. What I really need to be able to do is configure the OLEDB Destination Adapter to redirect any rows which throw an error when they hit the database, unfortunately, you can't do this because a detsination adapater doesn't have any output (even though there is a place to configure errors with redirect being an option).
Does anyone have any ideas on how I can setup an error redirection to redirect ONLY those rows which are rejected, because the inbound file has a NULL where it shouldn't? Please don't tell me that I have to set something up to test every single column, because we are talking about over 2,000 columns which would need to be checked.
Hi,
I have a flat file source. In the flat file, there are some bad, i.e. incomplete rows.
I set up the flat file error output to send the bad rows to a file destination on both "error" and "truncation".
However, for some reason it's really buggy, and doesn't work correctly.
For example, if my data looks like this:
cat, whiskers, 10 -- good row
dog, spot, 15 -- good row
blah -- bad row
blah blah -- bad row
horse, flicka, 20 -- good row
It correctly sends "blah" & "blah blah" to the error output, but it ALSO sends "horse, flicka, 20" to the error output as well.
This is NOT what I want.
I have this particular scenario 5 times in the data file. And each and every time, it sends the first two bad rows PLUS the following GOOD row to the error output, so basically, I lose 5 good rows in the process.
Aside from writing a script to remove the bad rows, is there an explanation for this strange behavior?
Thanks much
Hi,
Maybe someone can assist me in solving the following error.
I created a facttable with surrogate keys. In the package that processes the fact data a lookup-task is supposed to find the appropriate dimension key.
If a certain dimension row is not found, this error is redirected.
In this errorflow a stored procedure will add the missing row in the dimensiontable, after which another lookup takes place. Then the results of both lookups are brought together in a union all task.
When I test this errorflow I notice that the missing dimension row is indeed added to the dimensiontable. The only task that turns red is the first lookup. Please refer below for the errormessages.
I understand the first one; that is why I created the redirection. But what does the rest mean? And even if I redirect the error for further processing is it still counted as a raised error? If the maximum allowed is 1 (as indicated) will the task still fail?
Any help will be greatly appreciated. Thanks in advance and regards,
Albert.
The errormessages are as follows:
Error: 0xC020901E at Xforms, lookups en wegschrijven, Lookup LosplaatsKey [5071]: Row yielded no match during lookup.
Error: 0xC0047072 at Xforms, lookups en wegschrijven, DTS.Pipeline: No object exists with the ID 5317.
Error: 0xC0047022 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Lookup nwe losplaats" (5315) failed with error code 0xC0047072. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047072. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
.
.
.
Task failed: Xforms, lookups en wegschrijven
Warning: 0x80019002 at FactRittenInit: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (8) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "FactRittenInit.dtsx" finished: Failure.
I have a simple Error row redirection (from an OLEDB Command) to redirect all rows in error to a Transform script and thereafter to a Flat file destination. This is via the red arrow (DF path) output from the OLEDB Command.
I don't understand why this leg executes even when there are no rows in error? Zero byte Flat Files get written out when there are no errors.
How come? Why would a path with a red arrow execute even when there are no errors?
Part 2
When I introduce some errors in the data to cause an integrity violation, and I hook up an OnError event handler, it is never raised even through the error rows are successfully redirected and written out to the Flat File destination.
So what consitutes an error for a Data Flow Task? Is an error raised by Sql Server for an integrity violation bubble up as an error in the SSIS package?
Hi all!
I´ve having some issues with a package that I´m currently building.
The package is pretty much finished and doing what it´s supposed to,
just doing some testing to ensure everything is in order.
The package is pretty basic:
Read a fixed with text file, do a lookup on destination database table,
conditional split to determine what to insert and what to update, and that´s it!
At the source of my data flow I have the error output set to redirect all rows,
counting those rows, and finally writing them to a dynamically created file.
However, I just now realized that this file seems to be created ALWAYS,
regardless of rows actually being redirected or not. Everytime I run the package
with no rows being passed through the error output, I still end up with a
dynamically named, zero sized text file.
So my question: Is it possible to supress the creation of this file,
or do I have to add a file system component to my control flow,
deleting this file if my number of errorrows = 0 ?
Hope you can help!
Regards
Daniel
Hi,
I have created a SSIS package programmatically using C#.
The package should do the following take data from source A, and place rows into destination B, if there are any error rows then redirect the rows to destination C. In my package I have the following components:
DTSAdapter.OLEDBSource.1 - Used as the Source
DTSAdapter.OLEDBDestination.1 - Used for the Destination Output - (let me call this normalOutput)
DTSAdapter.OLEDBDestination.1 - Used for the Destination Error Output - (let me call this errorOutput)
All my mappings appear to be correct, I build and save the package and receive a Successful validation and Success on Execution.
However, When I open the application using the Execute Package Utility I get the warning:
Warning:No rows will be sent to the error output(s). Configure error or truncation dispositions to redirect rows to the error output(s), or delete data flow transformations or destinations that are attached to the error output(s)
How do I get around this?
I have placed on the DTSAdapter.OLEDBDestination.1 (Used for the Destination Output), on the input collection I have placed:
normalOutput.InputCollection[0].ErrorRowDisposition = DTSRowDisposition.RD_RedirectRow;
normalOutput.InputCollection[0].TruncationRowDisposition = DTSRowDisposition.RD_RedirectRow;
normalOutput.OutputCollection[0].ExclusionGroup = 1;
on the DTSAdapter.OLEDBDestination.1 (Used for the Destination Error Output) I have placed:
errorOutput.OutputCollection[0].ExclusionGroup = 1;
However this does not work, I just get the wanring displayed above.
I have also tried to set the
OutputCollection[0].SynchronousInputID for both the error output and the normal output to the same values
so that:
normalOutput.OutputCollection[0].SynchronousInputID = normalOutput.InputCollection[0].ID
errorOutput.OutputCollection[0].SynchronousInputID = normalOutput.InputCollection[0].ID
However, the above scenario does not pass the package validation, in the Execute Package Utiltity, I get the wanring mentioned above and also the error:
Error: The input "OLE DB Destination Input" (16) has an invalid error or truncation row disposition.
So my question is what are the correct configuration settings to have in this scenario?
Thanks
I am having a problem getting error rows to redirect between an OLE DB Source and an OLE DB Destination when using transactions. Each time I turn on the transaction control I get an error stating:
"[OLE DB Destination [48]] Error: The input "OLE DB Destination Input" (61) cannot be set to redirect on error using a connection in a transaction."
I get the above Error when using MSDTC. I have the data flow inside of a Sequence Container with the transaction option set to REQUIRED and the Isolation Level set to Serializable. I have tried all the Isolation levels.
I have the error rows piped off to a seperate OLE DB Destination. I have also tried using native SQL transactions with Execute SQL tasks to BEGIN, COMMIT or ROLLBACK the transaction. This does not work either. It looks like it works properly when the data flow is successful but using profiler I can see SSIS opens up a seperate process for the BEGIN and then another one with the Data Flow task. When I intentionally fail the Data Flow the Rollback always fails. I made sure I had RetainSameConnection turned on for the Connection I was using.
I am speculating that the Data Flow does not know what to Rollback the actual rows that succeeded or the error rows that are getting piped off.
I am fairly stumped on this one so any help is appreciated.
Thanks
Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that.
Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
Step : 3 Push From Mobile
Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);
So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.Â
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....
Hi All,
I have a table containing 21 columns. I want to alternate the color on the rows, to make it more radable and nocer to the eye. As such I set the BackgroundColor property on the entire TableRow (so it is applied to every textbox) to the following:
Code Snippet
=iif(RowNumber(nothing)Mod 2,"LightGray","White")
In theory it should work. I checked a few of the texboxes to make sure everything was okay and indeed the BackgroundColor property on each one of them was properly set to the above expression.
When I tried to build the report, I was prompted by 21 errors (one per textbox) stating the following:
[rsCompilerErrorInExpression] The BackgroundColor expression for the textbox 'FIELDNAME' contains an error: [BC30455] Argument not specified for parameter 'TruePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Obviously the TruePart parameter has been specified ("LightGray" in my expression), so what could be wrong??
Thanks in advance for the help
Idelso
Gurus,
For some reason the INPUT REDIRECTION of FTP commands from a file does not work when executed from a ISQL session.
"ftp -i -n host_name <serverstare_dirFTP-commands.dat >serverstare_dirFTP-errors.dat " would not work. It gives me an error message - "The handle could not be opened during redirection of handle 0 "
How ever it works from COMMAND prompt and BAT files.
I changed it use "-s:" option instead of INPUT REDIRECTION and it works just fine every where... The command I used is
"ftp -i -n -s:serverstare_dirFTP-commands.dat host_name >serverstare_dirFTP-errors.dat "
I still could not figure out why INPUT REDIRECTION would not work from ISQL only.
any ideas !!!!!!!!
Thanks,
- HemantH
I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
Dear all,
I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :
Key not valid for use in specified state
Failed to decrypt protected XML node "DTS Password" with error
What's wrong with the package ?
Thanks in advance.
Best regards,
Hery
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies View RelatedI have VB6 application on several desktops connected to SERVER A (SQL Server 2005) in TESTING. I know I can change some registry values in VB6 application to connect it to SERVER B(SQL Server 20050 in PRODUCTION.
but it is work on each and every desktop.
Is there any way to do something on SQL Server 2005 Engine end (like Alias) so I don't have to make changes for SERVER Redirection in each and every Desktop machine(client), and Just I make change on SERVER Side.
any help or idea on that?
Thanks,
Many a times see the below error in SQL Error log.
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Is this something to do here?
Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?
CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS
Hi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
Publisher: SQL Server 2000 SP4
Subscriber: SQL Server 2005 Mobile Edition
Sometimes, after a failed merge replication(due to communication error) some rows on the subscriber became invisible for the publisher.
I've reproduced a case:
[START Short Version]
All rows inserted between a comm failed sync and a fine sync became invisible.
This seems to be caused because the subscriber keeps generating rows with the same generation number and the publisher doesn't look for this generation anymore.
[END Short Version]
[START Detailed case]
STEP 0: INITIAL STATE
Publisher
Orders Table
EMPTY
Subscriber
NO DATABASE
STEP 1: After FIRST SYNC and INSERTING 2 Orders
Publisher
Orders Table
EMPTY
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC000001 4 4 81000002 4 4 81
STEP 2: After SECOND SYNC
Publisher
Orders Table
OrderId
000001
000002
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
STEP 3: INSERT ANOTHER ORDER
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
STEP 4: After THIRD SYNC (with comm error)
Error: [NativeError:28037][HRESULT:-2147012889]->[A request to send data to the computer running IIS has failed. For more information, see HRESULT.]
When: Error happens provoked after sending from Subscriber to Publisher but before ending syn process.
Publisher
Orders Table
OrderId
000001
000002
000003
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
Note: Publisher has the row but subscriber keeps the state in 81.
STEP 5: INSERT ANOTHER ORDER (BEFORE A GOOD SYNC)
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
Note: Orders 000003 and 000004 have the same system info
STEP 6: After FOURTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
Note: Even with a fine merge process Publisher didn't get the 000004 row and the Subscriber didn't update the __sysMC
STEP 7: INSERT ANOTHER ORDER
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
000005 8 8 81
STEP 8: After FIFTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
000005
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
000002 8 8 80
Note: Data from generation 8 merge correctly, but data from generation 6 keeps invisible to publisher.
STEP 9: DUMMY UPDATE ON GEN 6 ROWS
Action: I made a non relevant update to force the Subscriber update the generation.
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 10 81
000004 6 10 81
000005 8 8 80
Note: sysCG get its value updated correctly.
STEP 10: After SIXTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
000004
000005
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 80
000004 6 6 80
000002 8 8 80
Note: Data merges correctly.
[END Detailed case]
I could code a system that checks all the publication tables and updates all the last generation rows in case of communication error but i would really like to avoid doing it.
I don't know if I'm missing something or if this is a bug or a known issue.
This is a big problem for me because communication errors on cellular phone based connection are quite common and users keep working even if there's an error.
Any comment will be appreciated.
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
Any sort of help would be highly appreciated.
Thanks,
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
Any sort of help would be highly appreciated.
Thanks,
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
Expected result:
Uniid <-> Stockcode <-> FailedRows
1670 <-> GJ-00064 <-> 1
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB]
GO
/****** Object: Trigger   Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
hi ,
i am creating a service broker application between two different instance.when i am initiating a dialog from the source my message remain in the sys.transmission_queue.but its transmission_status column is empty.
i attached the profiler with both source and target by including all the service broker event.
in my source profiler i am getting the error like -- Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'. with event Broker:connection
and in the target profiler error is --This message could not be delivered because the security context could not be retrieved. with event Broker:Message Undelivarible.
i have checked my port also using telnet with remotely and localy both working fine. i am using port no. 4001
and i have mentioned the port no. in the address of the route.
bt still getiing the error.
please help!!!!!!!!!!!
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I have a really odd one here. We have a production server which is running SQL 2000 Enterprise Edition SP3. It has a number of databases which are backed up nightly. Last night all of the back-up jobs failed with the following error: -
Msg 913, Sev 16: Could not find database ID ##. Database may not be activated yet or may be in transition. [SQLSTATE 42000]
The databases are in good shape - no issues to report. When I run the Agent Job code within a Query Analyser session it works fine.
When I try and re-start the back-up from the Agent Job it continues to fail with the same error.
Any ideas?
Hi All,
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
Can you anyone please provide solution for this?
Thanks in advance,
Anand Rajagopal
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies View Related