Can anyone help me reduce a transaction log. It is currently at 2.5GB because it was set to autogrow with no backup !?
I need to drastically reduce it and have backed it up and tried dbcc shrinkfile...but...it now says space used is 120MB but current size is still 2.5GB.
How can i reduce this down please ??
thanks
If I have a transaction log in a database of size 1GB ( space allocated is during creation of database) currently only 300 mb of its space is used i.e. nearly 700 mb is free. If I want to reduce physical file size of transaction log by 200 mb and release it for operating system then How can I do it???
View 4 Replies View Relatedi am new to sql server. i recently found the transaction log size of my database has reached 109 MB. how can i reduce it. a transaction log backup was sceduled daily at 12.00 noon nad full backup monthly.
View 3 Replies View RelatedAt this time I am only playing with the applications that generate the data and send it to the database. Without doing too much, and with deleting most data tables that were created, my transaction log file has grown over a gigabyte. I tried using the SQL server management studio (express) to shrink the database (tried shrinking files, too) but that did not make the file smaller. Right now there is hardly any data in the database (6 tables, a dozen columns and rows each) so it must be old transactions that are kept in the log. How do I get rid of the old data and make the file size smaller? Thanks.
Kamen
hi
i have a database that becomes to big after a few days. is there a chance to say if the table reaches a number of lines or a special memorysize, delete (or better archive) the oldest entries?
thanks
I have a production database of a size of 70 GB. Half of the data was archived and deleted from the current database. What is the best way to
reduce the size of the database, as we cannot shrink an entire database to be smaller than its original size? Thanks a lot!
I created few jobs that would archive the production DB and delete the archived data...
but it looks like the DB size is not reducing!!! Some times it looks like the size has increased!!
I think this is because of the log file size has increaded by the DELETE operations....But what can I do for this???
Please Help!!
I have a Log file grown to 28 G.
TASK: I want to claim the hard disk space.
I want to use
--backup Log DB-NAME with truncate_only
--dbcc shrinkfile(DB-NAME_Log,1)
Is there any risk involved in above steps, and OR would any experienced Folk like to share his or her idea to the Task as above.
Many Thanks,
I have a database who is in full recovery mode. I have four maintenence plans setup: database backup, log backup, optimization and integrity checkup. The last two plans run weekly and the first two run daily. I found that the log size often increase to a dramatically size in a very short period, almost same size as the database file (4G). Further I found that the size seems increase a lot after the last two plan runs.
My question is that the optimization operation(reconstruct index page) will write any reocord to log file? Is this possible a reason?
Now the log file occupy too much disk space (90% of space can be free). What I should do? Shrink database weekly?
Thanks
Hello. I am wondering how to effectively reduce the size of my database. After viewing the individual table sizes, I have come to realize that nearly 99% of the database's size is due to images. I am told that too much binary data is not good. How can I go about reducing the size of my database (possibly the images themselves)? I'd appreciate any help.
View 11 Replies View RelatedHello,A while back I dropped a text column from a SQL Server 7 databaseroughly 3GB in size. I expected the size of the database to decreaseby around 1GB, but no change occurred. After searching usenet, Idiscovered that SQL Server 7 has no way of reclaiming that space, butthat there is some command that can be run in SQL Server 2000 thatwill reclaim it.I have since migrated this database to SQL Server 2000, and am nowtrying to figure out what that command is, but cannot locate anyusenet posts about it... also tried searching books online, but can'tfind anything that way either.Does anyone know what I should run?Thanks,Tom
View 6 Replies View RelatedIn one of my SSRS report under body properties default size (width = 34.54712cm , height = 20.92853cm ). I've tried to reduce the size to width = 26cm ,height = 18 . once i changed. the width its going to the same orginal size again.
View 2 Replies View Relatedhi all,I checked out in google groups but was not able to findthe answer...is it possible to limit size table in sql server?how can I do it?TIA
View 2 Replies View RelatedAre there any tips/techniques/issues when doing a begin tran and commit between a sql 2000 server/db and a sql 2005 server/db. Should you still use "set xact_abort on"? This will be a recordset of about 1-2000
View 1 Replies View RelatedHey all,
Just went through migrating to SQL 2005 as well and we have a need to apply log shipping between SQL 2000 and SQL 2005. Well not shipping per say in the automated fashion that SQL 2005 offers but rather we need to apply SQL 2000 transaction logs to a SQL 2005 instance. Though the database is still in SQL 2000 version 80 and the secondary database needs to be available in read only. (STANDBY MODE)
When I attempt to restore either a FULL backup or transaction log I get the error:
RESTORE DATABASE is terminating abnormally. This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY
The only way I could restore the FULL was by using the WITH RECOVERY OR NORECOVERY option during the restore process. The issue with this is I need the database in standby by mode in order to continue to append transaction logs.
Anybody have any thoughts how I might be able to get around this?
Thanks
Eric
Hello!
We have unusual situation. We increased the size of transaction log up to 100MB.
After we run the transaction log backup the physical size of transaction log file getting smaller and smaller from 100 to 88 and then to 76 and so on.
Do you now the reason?
Thank you,
Natalia
I have a very serious problem, if somebody can help me quickly. my transaction log file is getting bigger and bigger even after truncating. today morning when i checked, it was 1.5 GB, by evening it has gone upto 3GB, the total size of the database is 3.4 GB, out of which 3GB is Transaction log. why is it growing heavily!!!!!!!!. there is not much transaction happening. even after truncating the transaction log it is still showing 3gb.
help!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I currently have an database that is 110 mb and grows on an average of 5mb a week. THe enviornment is IIS 5.0 /ASP /SQL 6.5. However I find myself continously increasing the log file since it frequently fills up. At this point it is 300mb and can be filled in less than an hour with an average of 35 users. I realize that this file has alot of overhead and is affected directly by the application making the updates. Last week on a busy day (time card app) I witnessed the log increase from below 75% to 100% in a minute, forcing me to truncate the log. This application is an administrative nightmare! Any ideas what could cause this type of activity in the trans log.
View 3 Replies View RelatedHi!
We have here a small database (around 400 MB) with simple recovery. Also autogrowth is active.
But why does the transactionlog also sized up, when it is not in use?
Our TL is around 100 MB and filled with 5 MB.
Everytime the DB gets bigger, the TL also....
This isin continuation with my previous query. If i cannot reduce th T Log size , how can i stop it from increasing further. Can i make secondary log files which can be deleted later on?
View 3 Replies View RelatedHi All,
I need to create a script that would return the size of transaction logs for all databases. I ran a select statement against the sysfiles table but you can only run it against one db at a time. Any suggestions?
Thanks.
Hello dear friends,
In my database i am not able to take the backup of transaction log.
Even if i took the back up and then shrunk the file it doesnt make any change to my transaction log size.
Still the size is same.
So in every two weeks i am restarting my server.
Once it is restarted then it is ok for another 2 weeks.
After 2 weeks my transaction log size will be more than the size of my datafile.
Can you suggest your openion.
No replication or log shipping exist.
Thank you
Hi All,
I need to create a script that would return the size of transaction logs for all databases. I ran a select statement against the sysfiles table but you can only run it against one db at a time. Any suggestions?
Thanks.
Hello, everyone:
I am deisgning the transaction log file, and having the rough idea for transaction numbers per hour. How to determine each transaction size?
Thanks a lot.
ZYT
I have written an application which runs as a windows service. The application constantly requires to write data into the database.. pretty much every seond. Some of the tables have more than 800,000 rows.
the application works fine. Hoever I am noticing the transaction log grows very fast. All information added is handled through stored procedures. In one week the transaction log grew to 2GB. I assume a part of the reason was because I ran out of disk spae once. But generally this transaction log is growing fast. What could cause the transaction logs to grow fast, What could I do to keep the log file size down....I cant have the database down as the application needs to be running constantly.
I have a database whose recovery mode is FULL. I setup one maintenace plan do a backup for the database and another backup plan which backup the transaction log. The two maintenace plans runs daily.
However, the log file is still growing to a very large size. Should the log file be able to reuse after each backup of the transaction log ?
If I'd like to keep the database recovery mode as "FULL", what do I have to do to keep the transaction log within a reasonable size.
How the size of transaction file is calculated. are there any standards.
I created my database with 2000 mb data filesize and 200 log file size.
now my datafile size has reach to 11000 mb but log file size is still 200.
Therefore when I take the online backup my logsize totally consumed and I have to cancel my backup.
Please reply ASAP.
regards
Sanjeev Lamba
Hi,
I'm sure this question has been asked before but I need clarification on a couple of points.
I have a database (500 Mb) which is having a full backup every night at 2AM. I am doing a transaction log backup every 2 hours between 7AM and 7PM. I have noticed that the transaction log keeps growing bigger and bigger so I do a manual truncate.
- Will my transaction log keep growing bigger and bigger ?
- How can I automate a task to reduce the log size ?
- Does a full backup not truncate the log ?
Thanks for any advice,
Tim
I created a database and had its file size as automatic grow. Now the database file is of 17 MB and its transaction log file size is 230 MB. After checking transaction log file properties I came to that it is using 13 mb only and the rest of the 230 MB i.e 217 MB is free. I want that area in the transaction log to be freed and get the transaction file size to its actual size. Any help will be greatly appreciated.
Thank you in advance.
P.S: It is very urgent.
My database's transaction log has become 1.7 GB. Can I reduce it's size? I have tried to shrink database and also set truncate on checkpoint option and also taken the backup after that. but nothing helps. Please advice.
View 1 Replies View RelatedHi,
A very quick (and probably simple to answer) question.
I have a database for which I used Enterprise Manager to set up a complete backup at 2AM every day and a transaction log backup every 2 hours between 8AM and 8PM.
I have noticed that the transaction log is growing huge but I thought that it is supposed to get truncated every complete database backup !!
What can I do to "manage" the log file size ? (preferably automatic task)
Thanks,
TIm
Hi !
How can I find or calculate the exact space occupied by the database and transaction log in the hard disk?
Praveena
(Windows 2000 professional running SQL Server 2000)
How do you reduce the file size of the transaction log? Is it safe to delete the transaction log? I tried clicking on the ellipse (...) box in database properties, but even tho i'm the dba, it says i don't have permissions to do that! I see the "automatically grow transaction log" and "maximum file size for transaction log" dialogs, but our transaction log is already 5.5 GB, and we need for it to be WAY smaller! Is there a way to back it up, then start over with a new one or something?